viocon(4): New virtio tty driver imported from OpenBSD.

viocon* at virtio?

/dev/ttyVI??

Tested under qemu with:

qemu-system-aarch64 ... \
-device virtio-serial \
-chardev socket,path=/tmp/ttyVI00,server=on,wait=off,id=ttyVI00 \
-device virtconsole,chardev=ttyVI00,name=org.NetBSD.dev.ttyVI00 \
...

I updated MAKEDEV.conf to create /dev/ttyVI?? on all ports where it
looks likely to work based on:
(a) having pci or a non-pci virtio attachment,
(b) `qemu-system-$ARCH -M ?' mentioned something resembling the port,
and
(c) `qemu-system-$ARCH -device virtio-serial' launched without
complaining about the virtio-serial device.

(Criterion (c) excluded sparc and sparc64.)

evbmips: add ofctl(8) and /dev/openfirm support

Remove the satlink driver. It was disabled everywhere, had no man page and
no use either. Spotted by thorpej in PR/21345, ok christos.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.8.2; 1.8.4;
merge the rest of sbmips into evbmips. install the stand files in
/usr/mdec/sbmips/ and document them in installboot(8) even though
it isn't really ported yet. also build the SBMIPS kernels.

unfortunately, sbmips has been broken since mips64 merge, but the
fix can happen in the evbmips version, which we might merge into
the older trees anyway.

XXX: releng can turn off sbmips* builds now for -current.

branches: 1.7.6;
create sysmon nodes, so wdogctl works.

branches: 1.6.2;
generate iic* entries

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.4.26; 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

g/c audio0-3 (created by target 'audio')
g/c wscons-related devices (all created by target 'wscons')

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

evbmips: add ofctl(8) and /dev/openfirm support

Remove the satlink driver. It was disabled everywhere, had no man page and
no use either. Spotted by thorpej in PR/21345, ok christos.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.8.2; 1.8.4;
merge the rest of sbmips into evbmips. install the stand files in
/usr/mdec/sbmips/ and document them in installboot(8) even though
it isn't really ported yet. also build the SBMIPS kernels.

unfortunately, sbmips has been broken since mips64 merge, but the
fix can happen in the evbmips version, which we might merge into
the older trees anyway.

XXX: releng can turn off sbmips* builds now for -current.

branches: 1.7.6;
create sysmon nodes, so wdogctl works.

branches: 1.6.2;
generate iic* entries

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.4.26; 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

g/c audio0-3 (created by target 'audio')
g/c wscons-related devices (all created by target 'wscons')

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Remove the satlink driver. It was disabled everywhere, had no man page and
no use either. Spotted by thorpej in PR/21345, ok christos.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.8.2;
merge the rest of sbmips into evbmips. install the stand files in
/usr/mdec/sbmips/ and document them in installboot(8) even though
it isn't really ported yet. also build the SBMIPS kernels.

unfortunately, sbmips has been broken since mips64 merge, but the
fix can happen in the evbmips version, which we might merge into
the older trees anyway.

XXX: releng can turn off sbmips* builds now for -current.

branches: 1.7.6;
create sysmon nodes, so wdogctl works.

branches: 1.6.2;
generate iic* entries

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.4.26; 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

g/c audio0-3 (created by target 'audio')
g/c wscons-related devices (all created by target 'wscons')

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

merge the rest of sbmips into evbmips. install the stand files in
/usr/mdec/sbmips/ and document them in installboot(8) even though
it isn't really ported yet. also build the SBMIPS kernels.

unfortunately, sbmips has been broken since mips64 merge, but the
fix can happen in the evbmips version, which we might merge into
the older trees anyway.

XXX: releng can turn off sbmips* builds now for -current.

create sysmon nodes, so wdogctl works.

branches: 1.6.2;
generate iic* entries

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.4.26; 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

g/c audio0-3 (created by target 'audio')
g/c wscons-related devices (all created by target 'wscons')

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

create sysmon nodes, so wdogctl works.

generate iic* entries

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.4.26; 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

g/c audio0-3 (created by target 'audio')
g/c wscons-related devices (all created by target 'wscons')

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.4.26; 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

g/c audio0-3 (created by target 'audio')
g/c wscons-related devices (all created by target 'wscons')

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Pull up following revision(s) (requested by hubertf in ticket #429):
etc/etc.bebox/MAKEDEV.conf: revision 1.5
etc/etc.x68k/MAKEDEV.conf: revision 1.8
etc/etc.next68k/MAKEDEV.conf: revision 1.3
etc/etc.ofppc/MAKEDEV.conf: revision 1.5
etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
etc/etc.amd64/MAKEDEV.conf: revision 1.8
etc/etc.algor/MAKEDEV.conf: revision 1.4
etc/etc.sparc64/MAKEDEV.conf: revision 1.12
etc/etc.hp300/MAKEDEV.conf: revision 1.11
etc/etc.sgimips/MAKEDEV.conf: revision 1.8
etc/etc.pc532/MAKEDEV.conf: revision 1.5
etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
etc/etc.pmppc/MAKEDEV.conf: revision 1.6
etc/etc.cobalt/MAKEDEV.conf: revision 1.4
etc/etc.evbmips/MAKEDEV.conf: revision 1.4
etc/etc.sparc/MAKEDEV.conf: revision 1.11
etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
etc/etc.i386/MAKEDEV.conf: revision 1.12
etc/etc.acorn32/MAKEDEV.conf: revision 1.8
etc/etc.evbppc/MAKEDEV.conf: revision 1.5
etc/etc.amiga/MAKEDEV.conf: revision 1.10
etc/etc.prep/MAKEDEV.conf: revision 1.4
etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
etc/MAKEDEV.tmpl: revision 1.71
etc/etc.alpha/MAKEDEV.conf: revision 1.7
etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
etc/etc.macppc/MAKEDEV.conf: revision 1.7
etc/etc.mmeye/MAKEDEV.conf: revision 1.5
etc/etc.mac68k/MAKEDEV.conf: revision 1.7
etc/etc.vax/MAKEDEV.conf: revision 1.10
etc/etc.arc/MAKEDEV.conf: revision 1.6
etc/etc.hp700/MAKEDEV.conf: revision 1.4
etc/etc.mipsco/MAKEDEV.conf: revision 1.3
etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@

Sync with HEAD

Make 4 flash devices by default.