viocon(4): New virtio tty driver imported from OpenBSD.

viocon* at virtio?

/dev/ttyVI??

Tested under qemu with:

qemu-system-aarch64 ... \
-device virtio-serial \
-chardev socket,path=/tmp/ttyVI00,server=on,wait=off,id=ttyVI00 \
-device virtconsole,chardev=ttyVI00,name=org.NetBSD.dev.ttyVI00 \
...

I updated MAKEDEV.conf to create /dev/ttyVI?? on all ports where it
looks likely to work based on:
(a) having pci or a non-pci virtio attachment,
(b) `qemu-system-$ARCH -M ?' mentioned something resembling the port,
and
(c) `qemu-system-$ARCH -device virtio-serial' launched without
complaining about the virtio-serial device.

(Criterion (c) excluded sparc and sparc64.)

efi: Add /dev/efi character device

Introduce a /dev/efi character device that provides a means for accessing
UEFI RT variable services from userland. Compatible with the FreeBSD ioctl
interface for ease of porting their libefivar and associated tools.

The ioctl interface is defined in sys/efiio.h.

To enable support for this on an arch, the kernel needs `pseudo-device efi`
and the MD EFI implementation needs to register its backend by calling
efi_ops_register(). This commit includes an implementation for Arm.

Add nvme(4) and raid(4).

Add tprof

Make more ld device nodes.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.17.8; 1.17.10;
Create /dev/openfirm device for ofctl(8).

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.2;
Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

efi: Add /dev/efi character device

Introduce a /dev/efi character device that provides a means for accessing
UEFI RT variable services from userland. Compatible with the FreeBSD ioctl
interface for ease of porting their libefivar and associated tools.

The ioctl interface is defined in sys/efiio.h.

To enable support for this on an arch, the kernel needs `pseudo-device efi`
and the MD EFI implementation needs to register its backend by calling
efi_ops_register(). This commit includes an implementation for Arm.

Add nvme(4) and raid(4).

Add tprof

Make more ld device nodes.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.17.8; 1.17.10;
Create /dev/openfirm device for ofctl(8).

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.2;
Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add nvme(4) and raid(4).

Add tprof

Make more ld device nodes.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.17.8; 1.17.10;
Create /dev/openfirm device for ofctl(8).

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.2;
Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add tprof

Make more ld device nodes.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.17.8;
Create /dev/openfirm device for ofctl(8).

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.2;
Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Create /dev/openfirm device for ofctl(8).

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.2;
Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Add tty2 tty3 devices to evbarm MAKEDEV; JETSONTK1 has console on com3.

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add bpf to all_md

Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.

Obtained from Marvell, Semihalf.

create audio devices

Add a new installer image for Raspberry PI to evbarm

Includes the following major changes:

1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.

Much of the sshramdisk code could be reused on other ports easily.

create /dev/vchiq

Create a plcom0 device node for RaspberryPI

Add the next three /dev/pci nodes.
Marvell Orion already exposes two.

branches: 1.7.2;
Add lots more ldN dkN
Add drvctl to md

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.5.4; 1.5.6; 1.5.8;
added ld0 for SD/MMC.

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards

branches: 1.3.14;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.2.32; 1.2.36;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Merge in changes between wrstuden-revivesa-base-2 and
wrstuden-revivesa-base-3.

Sync with HEAD.

Sync with HEAD

Add more ld, dk, and drvctl devices for all and ramdisk|floppy

Pull up following revision(s) (requested by skrll in ticket #813):

etc/MAKEDEV.tmpl 1.160
etc/etc.evbarm/MAKEDEV.conf 1.9
external/broadcom/rpi-firmware/dist/LICENCE.broadcom 1.1
external/broadcom/rpi-firmware/dist/bootcode.bin 1.1
external/broadcom/rpi-firmware/dist/bootcode.bin 1.2
external/broadcom/rpi-firmware/dist/fixup.dat 1.1
external/broadcom/rpi-firmware/dist/fixup.dat 1.2
external/broadcom/rpi-firmware/dist/fixup_cd.dat 1.1
external/broadcom/rpi-firmware/dist/fixup_cd.dat 1.2
external/broadcom/rpi-firmware/dist/start.elf 1.1
external/broadcom/rpi-firmware/dist/start.elf 1.2
external/broadcom/rpi-firmware/dist/start_cd.elf 1.1
external/broadcom/rpi-firmware/dist/start_cd.elf 1.2
sys/arch/arm/broadcom/bcm2835_bsc.c 1.1 via patch
sys/arch/arm/broadcom/bcm2835_bscreg.h 1.1 via patch
sys/arch/arm/broadcom/bcm2835_dotg.c 1.1 via patch
sys/arch/arm/broadcom/bcm2835_emmc.c 1.7 via patch
sys/arch/arm/broadcom/bcm2835_genfb.c 1.4 via patch
sys/arch/arm/broadcom/bcm2835_gpio_subr.c 1.2 via patch
sys/arch/arm/broadcom/bcm2835_gpio_subr.h 1.1 via patch
sys/arch/arm/broadcom/bcm2835_gpioreg.h 1.1 via patch
sys/arch/arm/broadcom/bcm2835_intr.c 1.3 via patch
sys/arch/arm/broadcom/bcm2835_mbox.c 1.5 via patch
sys/arch/arm/broadcom/bcm2835_mbox.h 1.4 via patch
sys/arch/arm/broadcom/bcm2835_obio.c 1.17 via patch
sys/arch/arm/broadcom/bcm2835_pm.c 1.2 via patch
sys/arch/arm/broadcom/bcm2835_rng.c 1.3 via patch
sys/arch/arm/broadcom/bcm2835_space.c 1.5 via patch
sys/arch/arm/broadcom/bcm2835_spi.c 1.1 via patch
sys/arch/arm/broadcom/bcm2835_spireg.h 1.1 via patch
sys/arch/arm/broadcom/bcm2835_tmr.c 1.3 via patch
sys/arch/arm/broadcom/bcm2835reg.h 1.10 via patch
sys/arch/arm/broadcom/files.bcm2835 1.14 via patch
sys/arch/evbarm/conf/RPI 1.23 via patch
sys/arch/evbarm/conf/files.rpi 1.3 via patch
sys/arch/evbarm/conf/mk.rpi 1.2 via patch
sys/arch/evbarm/conf/std.rpi 1.4 via patch
sys/arch/evbarm/rpi/rpi_machdep.c 1.34 via patch
sys/arch/evbarm/rpi/rpi_start.S 1.7 via patch
sys/arch/evbarm/rpi/rpi_vcmbox.c 1.2 via patch
sys/arch/evbarm/rpi/vcio.h 1.1 via patch
sys/arch/evbarm/rpi/vcprop.h 1.7 via patch
sys/conf/files patch
sys/dev/sdmmc/sdhc.c 1.43
sys/dev/sdmmc/sdhcvar.h 1.13
sys/dev/usb/dwc_otg.c 1.45 via patch
sys/dev/usb/dwc_otgreg.h 1.5 via patch
sys/dev/usb/dwc_otgvar.h 1.11 via patch
sys/dev/usb/files.usb 1.126 via patch
sys/dev/usb/if_smsc.c 1.7 via patch
sys/dev/usb/if_smscreg.h 1.1 via patch
sys/dev/usb/if_smscvar.h 1.1 via patch
sys/dev/usb/usbdevices.config patch
sys/dev/usb/usbdevs 1.633 via patch
sys/dev/usb/usbdevs.h regen
sys/dev/usb/usbdevs_data.h regen
sys/dev/wscons/wsconsio.h 1.105,1.107 via patch
sys/dev/wscons/wsdisplayvar.h 1.50
sys/dev/wscons/wsdisplay_util.c 1.2
sys/dev/videomode/edid.c 1.12 via patch

Greatly improved Raspberry Pi support. USB and onboard
Ethernet should work.
[skrll, ticket #813]

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")

sync with head

sync with head

resync from head

resync with head

Resync to 2012-11-19 00:00:00 UTC