Fix leading 8 spaces to a tab.

Create a compatibility symlink panel0 -> lcdpanel0

PR port-cobalt/55009

remove nsmb from MD list of devices to create for 'all'

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.15.2;
rename ledpanel to lcdpanel

rename panel to ledpanel

branches: 1.13.12;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.12.32;
Create USB devices on all_md target.

Create audio devices on all_md target.

Create bpf(4) device node on ramdisk for sysinst.

branches: 1.9.2;
Create audio devices on all_md.

Create ld, altq and nsmb devices on all_md.

Add entries for zstty(4) serial on Qube 2700.
Also add tty0[1-3] entries to ttys(5) for com(4) at puc(4).

branches: 1.6.8;
Remove fd0 and fd1 devices (which are nonexistent on cobalt)
from (probably unused) "minimal" target.

branches: 1.5.4;
Create /dev/pci0.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.4;
Create /dev/panel0 on target all_md.

branches: 1.2.6;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Create a compatibility symlink panel0 -> lcdpanel0

PR port-cobalt/55009

remove nsmb from MD list of devices to create for 'all'

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.15.2;
rename ledpanel to lcdpanel

rename panel to ledpanel

branches: 1.13.12;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.12.32;
Create USB devices on all_md target.

Create audio devices on all_md target.

Create bpf(4) device node on ramdisk for sysinst.

branches: 1.9.2;
Create audio devices on all_md.

Create ld, altq and nsmb devices on all_md.

Add entries for zstty(4) serial on Qube 2700.
Also add tty0[1-3] entries to ttys(5) for com(4) at puc(4).

branches: 1.6.8;
Remove fd0 and fd1 devices (which are nonexistent on cobalt)
from (probably unused) "minimal" target.

branches: 1.5.4;
Create /dev/pci0.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.4;
Create /dev/panel0 on target all_md.

branches: 1.2.6;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

remove nsmb from MD list of devices to create for 'all'

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.15.2;
rename ledpanel to lcdpanel

rename panel to ledpanel

branches: 1.13.12;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.12.32;
Create USB devices on all_md target.

Create audio devices on all_md target.

Create bpf(4) device node on ramdisk for sysinst.

branches: 1.9.2;
Create audio devices on all_md.

Create ld, altq and nsmb devices on all_md.

Add entries for zstty(4) serial on Qube 2700.
Also add tty0[1-3] entries to ttys(5) for com(4) at puc(4).

branches: 1.6.8;
Remove fd0 and fd1 devices (which are nonexistent on cobalt)
from (probably unused) "minimal" target.

branches: 1.5.4;
Create /dev/pci0.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.4;
Create /dev/panel0 on target all_md.

branches: 1.2.6;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

rename ledpanel to lcdpanel

rename panel to ledpanel

branches: 1.13.12;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.12.32;
Create USB devices on all_md target.

Create audio devices on all_md target.

Create bpf(4) device node on ramdisk for sysinst.

branches: 1.9.2;
Create audio devices on all_md.

Create ld, altq and nsmb devices on all_md.

Add entries for zstty(4) serial on Qube 2700.
Also add tty0[1-3] entries to ttys(5) for com(4) at puc(4).

branches: 1.6.8;
Remove fd0 and fd1 devices (which are nonexistent on cobalt)
from (probably unused) "minimal" target.

branches: 1.5.4;
Create /dev/pci0.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.4;
Create /dev/panel0 on target all_md.

branches: 1.2.6;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Create USB devices on all_md target.

Create audio devices on all_md target.

Create bpf(4) device node on ramdisk for sysinst.

branches: 1.9.2;
Create audio devices on all_md.

Create ld, altq and nsmb devices on all_md.

Add entries for zstty(4) serial on Qube 2700.
Also add tty0[1-3] entries to ttys(5) for com(4) at puc(4).

branches: 1.6.8;
Remove fd0 and fd1 devices (which are nonexistent on cobalt)
from (probably unused) "minimal" target.

branches: 1.5.4;
Create /dev/pci0.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.4;
Create /dev/panel0 on target all_md.

branches: 1.2.6;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Create USB devices on all_md target.

Create audio devices on all_md target.

Create bpf(4) device node on ramdisk for sysinst.

branches: 1.9.2;
Create audio devices on all_md.

Create ld, altq and nsmb devices on all_md.

Add entries for zstty(4) serial on Qube 2700.
Also add tty0[1-3] entries to ttys(5) for com(4) at puc(4).

branches: 1.6.8;
Remove fd0 and fd1 devices (which are nonexistent on cobalt)
from (probably unused) "minimal" target.

branches: 1.5.4;
Create /dev/pci0.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.4;
Create /dev/panel0 on target all_md.

branches: 1.2.6;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Pull up following revision(s) (requested by tsutsui in ticket #1257):
etc/etc.cobalt/MAKEDEV.conf: revision 1.3
Create /dev/panel0 on target all_md.

Pull up following revision(s) (requested by hubertf in ticket #429):
etc/etc.bebox/MAKEDEV.conf: revision 1.5
etc/etc.x68k/MAKEDEV.conf: revision 1.8
etc/etc.next68k/MAKEDEV.conf: revision 1.3
etc/etc.ofppc/MAKEDEV.conf: revision 1.5
etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
etc/etc.amd64/MAKEDEV.conf: revision 1.8
etc/etc.algor/MAKEDEV.conf: revision 1.4
etc/etc.sparc64/MAKEDEV.conf: revision 1.12
etc/etc.hp300/MAKEDEV.conf: revision 1.11
etc/etc.sgimips/MAKEDEV.conf: revision 1.8
etc/etc.pc532/MAKEDEV.conf: revision 1.5
etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
etc/etc.pmppc/MAKEDEV.conf: revision 1.6
etc/etc.cobalt/MAKEDEV.conf: revision 1.4
etc/etc.evbmips/MAKEDEV.conf: revision 1.4
etc/etc.sparc/MAKEDEV.conf: revision 1.11
etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
etc/etc.i386/MAKEDEV.conf: revision 1.12
etc/etc.acorn32/MAKEDEV.conf: revision 1.8
etc/etc.evbppc/MAKEDEV.conf: revision 1.5
etc/etc.amiga/MAKEDEV.conf: revision 1.10
etc/etc.prep/MAKEDEV.conf: revision 1.4
etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
etc/MAKEDEV.tmpl: revision 1.71
etc/etc.alpha/MAKEDEV.conf: revision 1.7
etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
etc/etc.macppc/MAKEDEV.conf: revision 1.7
etc/etc.mmeye/MAKEDEV.conf: revision 1.5
etc/etc.mac68k/MAKEDEV.conf: revision 1.7
etc/etc.vax/MAKEDEV.conf: revision 1.10
etc/etc.arc/MAKEDEV.conf: revision 1.6
etc/etc.hp700/MAKEDEV.conf: revision 1.4
etc/etc.mipsco/MAKEDEV.conf: revision 1.3
etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@

sync with HEAD

Sync with HEAD.

Sync with HEAD.

Pull up following revision(s) (requested by tsutsui in ticket #59):
etc/etc.cobalt/MAKEDEV.conf: revision 1.12
Create USB devices on all_md target.

Pull up following revision(s) (requested by tsutsui in ticket #59):
etc/etc.cobalt/MAKEDEV.conf: revision 1.11
Create audio devices on all_md target.

Pull up following revision(s) (requested by tsutsui in ticket #4):
etc/etc.cobalt/MAKEDEV.conf: revision 1.10
Create bpf(4) device node on ramdisk for sysinst.