Fix build; add -f flag to "rm miniroot.fs" in case of its absence.

provide both miniroot.fs (for people wanting to install NetBSD without
more 3rdparty software than what's provided on our ISO) and .fs.tz (for
people downloading over slow links).

Provide the (small) miniroot uncompressed, so that it can be used from
an AmigaOS without additional software to install NetBSD.
Closes PR port-amiga/45443

Remove ISDN.

branches: 1.27.32; 1.27.34;
Also build WSCONS kernel.

branches: 1.26.22;
Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.25.4; 1.25.10; 1.25.12; 1.25.14;
Add a comment reminding to update the release notes if the list of
kernels change.

Ensure ISDN kernels can be built for future releases.

AmigaDOS tools moving to distrib/amiga/stand.

Populate the installation/misc directory with the AmigaDOS tools.

branches: 1.21.2;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.

Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

When building a release, build miniroot and installation notes automatically,
too. Patch by Michael Hitch.

Add smaller install kernels.

branches: 1.12.4;
Build the miniroot, too, when building the release.

Update all this crap so that `make snapshot' makes snapshots in release(7)
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.

Use "${MAKE}" instead of "make" for cross compilation.

These commits do two things:

1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.

2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as

KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile

The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.

merge in 1.2 branch

branches: 1.7.4;
merge in changes from 1.1 release branch

branches: 1.6.2;
convert to new rcs ids

cleanup and add new devices

branches: 1.4.2;
fix wrong target name

add cd to MAKEDEV from tsarna@endicor.com (Ty Sarna)
add some misc additions to disktab and fstab.tmp

oops, typo.

build generic and a3000 kernels when making snapshot.

provide both miniroot.fs (for people wanting to install NetBSD without
more 3rdparty software than what's provided on our ISO) and .fs.tz (for
people downloading over slow links).

Provide the (small) miniroot uncompressed, so that it can be used from
an AmigaOS without additional software to install NetBSD.
Closes PR port-amiga/45443

Remove ISDN.

branches: 1.27.32; 1.27.34;
Also build WSCONS kernel.

branches: 1.26.22;
Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.25.4; 1.25.10; 1.25.12; 1.25.14;
Add a comment reminding to update the release notes if the list of
kernels change.

Ensure ISDN kernels can be built for future releases.

AmigaDOS tools moving to distrib/amiga/stand.

Populate the installation/misc directory with the AmigaDOS tools.

branches: 1.21.2;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.

Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

When building a release, build miniroot and installation notes automatically,
too. Patch by Michael Hitch.

Add smaller install kernels.

branches: 1.12.4;
Build the miniroot, too, when building the release.

Update all this crap so that `make snapshot' makes snapshots in release(7)
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.

Use "${MAKE}" instead of "make" for cross compilation.

These commits do two things:

1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.

2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as

KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile

The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.

merge in 1.2 branch

branches: 1.7.4;
merge in changes from 1.1 release branch

branches: 1.6.2;
convert to new rcs ids

cleanup and add new devices

branches: 1.4.2;
fix wrong target name

add cd to MAKEDEV from tsarna@endicor.com (Ty Sarna)
add some misc additions to disktab and fstab.tmp

oops, typo.

build generic and a3000 kernels when making snapshot.

Provide the (small) miniroot uncompressed, so that it can be used from
an AmigaOS without additional software to install NetBSD.
Closes PR port-amiga/45443

Remove ISDN.

branches: 1.27.32; 1.27.34;
Also build WSCONS kernel.

branches: 1.26.22;
Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.25.4; 1.25.10; 1.25.12; 1.25.14;
Add a comment reminding to update the release notes if the list of
kernels change.

Ensure ISDN kernels can be built for future releases.

AmigaDOS tools moving to distrib/amiga/stand.

Populate the installation/misc directory with the AmigaDOS tools.

branches: 1.21.2;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.

Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

When building a release, build miniroot and installation notes automatically,
too. Patch by Michael Hitch.

Add smaller install kernels.

branches: 1.12.4;
Build the miniroot, too, when building the release.

Update all this crap so that `make snapshot' makes snapshots in release(7)
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.

Use "${MAKE}" instead of "make" for cross compilation.

These commits do two things:

1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.

2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as

KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile

The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.

merge in 1.2 branch

branches: 1.7.4;
merge in changes from 1.1 release branch

branches: 1.6.2;
convert to new rcs ids

cleanup and add new devices

branches: 1.4.2;
fix wrong target name

add cd to MAKEDEV from tsarna@endicor.com (Ty Sarna)
add some misc additions to disktab and fstab.tmp

oops, typo.

build generic and a3000 kernels when making snapshot.

Remove ISDN.

branches: 1.27.32;
Also build WSCONS kernel.

branches: 1.26.22;
Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.25.4; 1.25.10; 1.25.12; 1.25.14;
Add a comment reminding to update the release notes if the list of
kernels change.

Ensure ISDN kernels can be built for future releases.

AmigaDOS tools moving to distrib/amiga/stand.

Populate the installation/misc directory with the AmigaDOS tools.

branches: 1.21.2;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.

Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

When building a release, build miniroot and installation notes automatically,
too. Patch by Michael Hitch.

Add smaller install kernels.

branches: 1.12.4;
Build the miniroot, too, when building the release.

Update all this crap so that `make snapshot' makes snapshots in release(7)
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.

Use "${MAKE}" instead of "make" for cross compilation.

These commits do two things:

1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.

2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as

KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile

The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.

merge in 1.2 branch

branches: 1.7.4;
merge in changes from 1.1 release branch

branches: 1.6.2;
convert to new rcs ids

cleanup and add new devices

branches: 1.4.2;
fix wrong target name

add cd to MAKEDEV from tsarna@endicor.com (Ty Sarna)
add some misc additions to disktab and fstab.tmp

oops, typo.

build generic and a3000 kernels when making snapshot.

Also build WSCONS kernel.

branches: 1.26.22;
Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.25.4; 1.25.10; 1.25.12; 1.25.14;
Add a comment reminding to update the release notes if the list of
kernels change.

Ensure ISDN kernels can be built for future releases.

AmigaDOS tools moving to distrib/amiga/stand.

Populate the installation/misc directory with the AmigaDOS tools.

branches: 1.21.2;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.

Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

When building a release, build miniroot and installation notes automatically,
too. Patch by Michael Hitch.

Add smaller install kernels.

branches: 1.12.4;
Build the miniroot, too, when building the release.

Update all this crap so that `make snapshot' makes snapshots in release(7)
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.

Use "${MAKE}" instead of "make" for cross compilation.

These commits do two things:

1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.

2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as

KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile

The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.

merge in 1.2 branch

branches: 1.7.4;
merge in changes from 1.1 release branch

branches: 1.6.2;
convert to new rcs ids

cleanup and add new devices

branches: 1.4.2;
fix wrong target name

add cd to MAKEDEV from tsarna@endicor.com (Ty Sarna)
add some misc additions to disktab and fstab.tmp

oops, typo.

build generic and a3000 kernels when making snapshot.

move the correctly-named kernel. from chopps

preserve netbsd when compressing

use INSTALL for building things

use GENERIC kernel here, too

Pullup from -current, requested by is, granted by thorpej: Makefile.inc 1.14

From mhitch:
Build miniroot and installation notes, too, when building a release.

Pull up from trunk with permission from jhawk:
Add and build additional distribution kernels, for the benefit of
PCMCIA and some IDE users, and the general small memory Amiga owners.

branches: 1.21.2.1.2;
Pull up revisions 1.22-1.23 (requested by mhitch in tickets #540, 541, 542):
AmigaDOS installation tools added.

Pull up revision 1.24 (requested by is in ticket #1010):
Ensure ISDN kernels are built for future releases.

Add a comment reminding to update the release notes if the list of
kernels change.

file Makefile.inc was added on branch matt-mips64 on 2007-07-24 10:49:25 +0000

Sync with HEAD.

sync with head.

sync with HEAD

sync with head