Switch to GENERIC kernels only.

Re-enable efiboot for armv7 (thanks skrll@)

Turn off efiboot until we figure out why it fails on some boards.

Switch to efiboot

Rename the DE0 Nano SoC dts file to its new linux/uboot name

Fix mmcpart for exynos SD card

Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2; 1.5.4;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Re-enable efiboot for armv7 (thanks skrll@)

Turn off efiboot until we figure out why it fails on some boards.

Switch to efiboot

Rename the DE0 Nano SoC dts file to its new linux/uboot name

Fix mmcpart for exynos SD card

Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Rename the DE0 Nano SoC dts file to its new linux/uboot name

Fix mmcpart for exynos SD card

Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Fix mmcpart for exynos SD card

Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Sort

Enable booting of netbsd-EXYNOS kernel

branches: 1.5.2;
Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Enable booting of netbsd-EXYNOS kernel

Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Enable automatic booting on tegra210

No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console

Use fb console by default on Pinebook

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.