Bump image size.

Bump image size

Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.

This will pass -nT instead of just -n if the gzip program is
actually pigz.

Ensure a disklabel is present since sun4v OpenBoot requires a valid disklabel in the disk file image. With this change the miniroot.fs can be used as a virtual disk when using sun4v LDOMs. OK martin@

branches: 1.30.2;
Use ${TOOL_GZIP} instead of just gzip in all Makefiles
outside */dist/* subdirectories.

When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.

branches: 1.29.6; 1.29.12;
Provide full terminfo.db on install media

Bump the miniroot size from 8m to 9m, so that the contents fits again.
OK'ed by mrg@

Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.26.20; 1.26.30;
Bump the miniroot size from 7MB to 8MB so that it fits again.

Don't remove sysinst via CLEANFILES. It's a directory..Provide a new clean rule
for it

Do not fail if directory sysinst exists. Makes update builds work again.

Copy the sysinst message files into the correct objdir at the same time
as copying the crunched program binary.
Fixes PR sparc64/25265

branches: 1.22.2;
Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

consistently use "${INSTALLBOOT} -v ..."

fix size of images
(i reduced them during testing and they worked then, but not when i
did a full make release. weird...)

improve how gzipping is done to reduce amount of temp files, etc.

this needs to be ${INSTALLBOOT}ed

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

Fix build; don't reference ${DISTRIBDIR} when it hasn't been defined; instead
define HACKSRC via ${SRCROOT}/distrib/utils/libhack

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

- don't put a copy of GENERIC in the netbsd.INSTALL kernel's embedded
filesystem's as /netbsd...

- reduce INSTALL size by 2.5MB.

- clean up list.m4

convert sparc64 to use `makefs' rather than vnd/newfs/mount. this severely
cleans up a lot of the processing here.


XXX: note that the sparc64 "INSTALL" kernel's file system has a copy of
GENERIC in /netbsd. fix this shortly.

vnconfig called incorrectly, breaks build

Add bsd.prog.mk for libhack components

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

netbsd.INSTALL.gz is already install; back out part of previous.

Install INSTALL kernel.

Make the size of the miniroot more easily tuneable and install it in a kernel.

branches: 1.2.2;
s/ramdisk/xminiroot/

rename sparc64 "ramdisk" to "xminiroot" to avoid confusion about what it actually does.

Bump image size

Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.

This will pass -nT instead of just -n if the gzip program is
actually pigz.

Ensure a disklabel is present since sun4v OpenBoot requires a valid disklabel in the disk file image. With this change the miniroot.fs can be used as a virtual disk when using sun4v LDOMs. OK martin@

branches: 1.30.2;
Use ${TOOL_GZIP} instead of just gzip in all Makefiles
outside */dist/* subdirectories.

When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.

branches: 1.29.6; 1.29.12;
Provide full terminfo.db on install media

Bump the miniroot size from 8m to 9m, so that the contents fits again.
OK'ed by mrg@

Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.26.20; 1.26.30;
Bump the miniroot size from 7MB to 8MB so that it fits again.

Don't remove sysinst via CLEANFILES. It's a directory..Provide a new clean rule
for it

Do not fail if directory sysinst exists. Makes update builds work again.

Copy the sysinst message files into the correct objdir at the same time
as copying the crunched program binary.
Fixes PR sparc64/25265

branches: 1.22.2;
Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

consistently use "${INSTALLBOOT} -v ..."

fix size of images
(i reduced them during testing and they worked then, but not when i
did a full make release. weird...)

improve how gzipping is done to reduce amount of temp files, etc.

this needs to be ${INSTALLBOOT}ed

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

Fix build; don't reference ${DISTRIBDIR} when it hasn't been defined; instead
define HACKSRC via ${SRCROOT}/distrib/utils/libhack

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

- don't put a copy of GENERIC in the netbsd.INSTALL kernel's embedded
filesystem's as /netbsd...

- reduce INSTALL size by 2.5MB.

- clean up list.m4

convert sparc64 to use `makefs' rather than vnd/newfs/mount. this severely
cleans up a lot of the processing here.


XXX: note that the sparc64 "INSTALL" kernel's file system has a copy of
GENERIC in /netbsd. fix this shortly.

vnconfig called incorrectly, breaks build

Add bsd.prog.mk for libhack components

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

netbsd.INSTALL.gz is already install; back out part of previous.

Install INSTALL kernel.

Make the size of the miniroot more easily tuneable and install it in a kernel.

branches: 1.2.2;
s/ramdisk/xminiroot/

rename sparc64 "ramdisk" to "xminiroot" to avoid confusion about what it actually does.

Apply patch (requested by he):
Introduce dependency between ramdisk/miniroot construction and
osrelease.sh, to better support UPDATE builds of releases.

Pull up revisions 1.1-1.2 (requested by mrg):
Rename sparc64 ``ramdisk'' to ``xminiroot'' to avoid confusion
about what it actually does.

file Makefile was added on branch netbsd-1-5 on 2001-02-03 20:21:26 +0000

Pull up revision 1.25 (requested by jmc in ticket #578):
Do not remove sysinst via CLEANFILES, since it is a directory.
Instead, provide a new clean rule for it. Fixes PR#26137.

Pullup rev 1.24 (requested by hannken in ticket #383)

Do not fail if directory sysinst exists.

Pull up revision 1.23 (requested by dsl in ticket #171):
Copy the sysinst message files into the correct objdir at the same time
as copying the crunched program binary.
Fixes PR sparc64/25265

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

Sync with HEAD.

Rebase to HEAD as of a few days ago.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")

Rebase.