distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg name to x68k machine dependency files

Give syspkg names to xserver without machine dependet files

branches: 1.19.14;
remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add X11R7 X68k server stuff.

branches: 1.17.6; 1.17.12;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.16.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.15.2;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.11.30; 1.11.34;
Move /usr/X11R6/lib/X11/X68kConfig from xserver to
xetc (as /etc/X11/X68kConfig), as it's an end user's configuration file.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

+ x set lists for mac68k
+ move arch dep to ad.m68k

md.x68k xserver list

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add Xwrapper.

branches: 1.3.2;
Added the X68k server and other data.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg name to x68k machine dependency files

Give syspkg names to xserver without machine dependet files

branches: 1.19.14;
remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add X11R7 X68k server stuff.

branches: 1.17.6; 1.17.12;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.16.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.15.2;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.11.30; 1.11.34;
Move /usr/X11R6/lib/X11/X68kConfig from xserver to
xetc (as /etc/X11/X68kConfig), as it's an end user's configuration file.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

+ x set lists for mac68k
+ move arch dep to ad.m68k

md.x68k xserver list

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add Xwrapper.

branches: 1.3.2;
Added the X68k server and other data.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Give syspkg name to x68k machine dependency files

Give syspkg names to xserver without machine dependet files

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add X11R7 X68k server stuff.

branches: 1.17.6; 1.17.12;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.16.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.15.2;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.11.30; 1.11.34;
Move /usr/X11R6/lib/X11/X68kConfig from xserver to
xetc (as /etc/X11/X68kConfig), as it's an end user's configuration file.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

+ x set lists for mac68k
+ move arch dep to ad.m68k

md.x68k xserver list

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add Xwrapper.

branches: 1.3.2;
Added the X68k server and other data.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Give syspkg names to xserver without machine dependet files

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add X11R7 X68k server stuff.

branches: 1.17.6; 1.17.12;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.16.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.15.2;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.11.30; 1.11.34;
Move /usr/X11R6/lib/X11/X68kConfig from xserver to
xetc (as /etc/X11/X68kConfig), as it's an end user's configuration file.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

+ x set lists for mac68k
+ move arch dep to ad.m68k

md.x68k xserver list

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add Xwrapper.

branches: 1.3.2;
Added the X68k server and other data.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add X11R7 X68k server stuff.

branches: 1.17.6; 1.17.12;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.16.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.15.2;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.11.30; 1.11.34;
Move /usr/X11R6/lib/X11/X68kConfig from xserver to
xetc (as /etc/X11/X68kConfig), as it's an end user's configuration file.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

+ x set lists for mac68k
+ move arch dep to ad.m68k

md.x68k xserver list

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add Xwrapper.

branches: 1.3.2;
Added the X68k server and other data.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Add X11R7 X68k server stuff.

branches: 1.17.6; 1.17.12;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.16.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.15.2;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.11.30; 1.11.34;
Move /usr/X11R6/lib/X11/X68kConfig from xserver to
xetc (as /etc/X11/X68kConfig), as it's an end user's configuration file.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

+ x set lists for mac68k
+ move arch dep to ad.m68k

md.x68k xserver list

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add Xwrapper.

branches: 1.3.2;
Added the X68k server and other data.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

pull up revs 1.2-1.3 from trunk (minoura)

Pull up HEAD v1.4 per MINOURA Makoto <minoura@netbsd.org>

Sync with wrstuden-revivesa-base-2.

Sync with HEAD.

Sync with HEAD.

Pull up following revision(s) (requested by abs in ticket #431):
distrib/sets/lists/xserver/md.x68k: revision 1.16
distrib/sets/lists/xserver/md.vax: revision 1.6
external/mit/xorg/server/xorg-server/Makefile.common: revision 1.6
x11/Xserver/Makefile.common: revision 1.35
Enable Xvfb build on vax and x68k to match every other port.

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

Rebase to HEAD as of a few days ago.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")