distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

Also put back libfb.a in xorg_server_ver=110 case.

It looks required only on building Xorg server binary and
unnecessary for release (actually marked as obsolete only on vax),
but no simple settings to "build static libraries without installation"
and most ports will be switched to Xorg 1.20 soon.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

branches: 1.27.2;
updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

Also put back libfb.a in xorg_server_ver=110 case.

It looks required only on building Xorg server binary and
unnecessary for release (actually marked as obsolete only on vax),
but no simple settings to "build static libraries without installation"
and most ports will be switched to Xorg 1.20 soon.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12; 1.18.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.18.12;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.14.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.8.2; 1.8.4;
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms

branches: 1.7.4;
As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.6.2;
Enable Xvfb build on vax and x68k to match every other port.

branches: 1.5.14;
Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.3.2; 1.3.10;
RCS Id police, and add md.vax file. Vax X server does not currently support
the keyboard or mouse, but that is not a distrib/sets issue :)

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

Merge various revisions [tv, approved by thorpej]:

Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

Resurrect this file, version 1.3:
o Add Vax X11 server
(tron)

file md.vax was added on branch netbsd-1-4 on 1999-09-10 21:54:41 +0000

Pull up following revision(s) (requested by abs in ticket #431):
distrib/sets/lists/xserver/md.x68k: revision 1.16
distrib/sets/lists/xserver/md.vax: revision 1.6
external/mit/xorg/server/xorg-server/Makefile.common: revision 1.6
x11/Xserver/Makefile.common: revision 1.35
Enable Xvfb build on vax and x68k to match every other port.

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")

sync with head

sync with head.

Rebase to HEAD as of a few days ago.

resync with head

Pull up following revision(s) (requested by abs in ticket #300):
external/mit/xorg/server/xorg-server/hw/xfree86/xorgos/Makefile: revision 1.33
x11/Xserver/Xserver/Makefile: revision 1.19
x11/Xserver/Makefile.common: revision 1.36
external/mit/xorg/server/xorg-server/Makefile.common: revision 1.25
distrib/sets/lists/xserver/md.vax: revision 1.8
external/mit/xorg/server/drivers/Makefile: revision 1.62
xsrc/external/mit/xorg-server/dist/hw/xfree86/common/compiler.h: revision 1.9
Add vax to the list of non inb() users
Enable wsfb X server on vax. Likely to be keyboard and mouse issues, but
with three additional lines of an ioctl() case in the kernel 'startx' will
display the traditional three xterms
Missed defining XSERVER_XVAX

file md.vax was added on branch netbsd-6 on 2012-06-11 20:53:40 +0000