distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

branches: 1.17.2;
Give syspkg name to Xsun server files.

Add build glue for Xorg-Server-1.20'fied monolithic Xsun servers.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.13.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.9.36; 1.9.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Sun 3 MD X server sets list for src/x11 builds.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add a NetBSD RCS tag to each distrib list file.

Remove: Xsun24 (not built for the sun3)
Add: constype, kbd_mode (useful where the Xserver runs)

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

Same as the sparc

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

branches: 1.17.2;
Give syspkg name to Xsun server files.

Add build glue for Xorg-Server-1.20'fied monolithic Xsun servers.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.13.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.9.36; 1.9.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Sun 3 MD X server sets list for src/x11 builds.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add a NetBSD RCS tag to each distrib list file.

Remove: Xsun24 (not built for the sun3)
Add: constype, kbd_mode (useful where the Xserver runs)

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

Same as the sparc

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Give syspkg name to Xsun server files.

Add build glue for Xorg-Server-1.20'fied monolithic Xsun servers.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.13.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.9.36; 1.9.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Sun 3 MD X server sets list for src/x11 builds.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add a NetBSD RCS tag to each distrib list file.

Remove: Xsun24 (not built for the sun3)
Add: constype, kbd_mode (useful where the Xserver runs)

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

Same as the sparc

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Add build glue for Xorg-Server-1.20'fied monolithic Xsun servers.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.13.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.9.36; 1.9.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Sun 3 MD X server sets list for src/x11 builds.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add a NetBSD RCS tag to each distrib list file.

Remove: Xsun24 (not built for the sun3)
Add: constype, kbd_mode (useful where the Xserver runs)

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

Same as the sparc

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.13.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

mark all src/x11 built files with "x11" tag.

branches: 1.9.36; 1.9.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Sun 3 MD X server sets list for src/x11 builds.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add a NetBSD RCS tag to each distrib list file.

Remove: Xsun24 (not built for the sun3)
Add: constype, kbd_mode (useful where the Xserver runs)

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

Same as the sparc

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

Pull rev 1.4 up from trunk (fvdl)

Pull rev 1.3 up from trunk (fvdl)

Pull rev 1.2 up from trunk (gwr)

Sync with wrstuden-revivesa-base-2.

Sync with HEAD.

Sync with HEAD.

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html