distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors in case of HAVE_XORG_SERVER_VER=110.
(Note these ports have been switched to HAVE_XORG_SERVER_VER=120)

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Restore the pnozz Xorg driver, now that it has EXA support.

branches: 1.74.4;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to sparc machine dependency files

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.68.2; 1.68.4;
glint is enabled both xorg-server 1.10 and 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

mark pnozz obsolete on xorg-server 1.18

makr pnozz, ag10e, sunleo as 1.10 only

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.59.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

update sets and reachover makefiles for mesa 10.3.5.

branches: 1.56.4;
Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.51.2; 1.51.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

updates for Mesa 7.7.1.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

add entries for the suncg14 driver
This driver isn't actually useful yet - our kernel cgfourteen driver pretends
to be a cg8, I'll change that next.

Update for the addition of xf86-video-ws (hi mbalmer!).

add files for the sunleo driver

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

- build mesa_dri and swrast on all platforms
- kill imstt
- re-add int10 on macppc

add pnozz and suntcx drivers

install the xorg "protocol.txt" file.

remove libint10 libraries that are not needed for sparc*.

unobsolete libglx

- build and install swrast_dri.so
- don't force linking dri_util.c into swrast_dri.so
- fix the source lists in libGL/OSmesa makefiles
- unobsolete the symbols/pc keymap and 7x14-KOI8-R.pcf.gz font

XXX the libGL/OSmesa makefiles could use some reorg. there
XXX are a bunch of duplicated items.

merge all the changes for xorg-server 1.6

from yorick hardy:
- build mesa_dri.so, saving ~1.8MB per module (yay, the size of the
xsetrver set goes down massively now)
- use the right includes so that dri * mesa use the same headers
- correct LIBDPLIBS for libdri

tested by jmcneill, and builds fine for me.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.30.2;
Install the Cards file used by xorgconfig.

add entries for the AG-10e driver and man page

fix file list for xorg
( note: this is compile-tested only and the only useful driver would be
suncg6. There's a good chance it will Just Work on a wscons kernel
though )

branches: 1.27.2; 1.27.6;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

sort various files (before adding new entries)

branches: 1.21.8; 1.21.12;
let build.sh build the ag10e driver

branches: 1.20.4;
build sunffb and xf8_32wid on sparc

add some missing files

add entries for ATI drivers and man pages

branches: 1.17.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

Build XFree86 on NetBSD/sparc.
Tested on Krups and a SPARCbook 3GX
Works only with wscons kernels, currently there's official support on Krups
with igsfb and more or less official support for SPARCbooks with pnozz and
SPARCstations with cgsix.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Move X server related stuff from xbase/md.sparc -> xserver/md.sparc.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

move xvidtune to xserver/mi since it's installed by all machines

XXX we may want to not install it at all, but this is better than
having it spread across xbase for some machines and xserver
for others in various md.<mach> files.

sparc x set lists

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

support XF4 on sparc. had to move parts of x{base,comp}4/mi into the
relevant ports as they do not apply to sparc (or other non-"hw/xfree86"
ports.)

branches: 1.8.2;
Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.7.8;
Add a NetBSD RCS tag to each distrib list file.

sort files

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

To be consitent with the other sets:
- use ./usr and not usr
- remove duplicated directory entries

branches: 1.2.2;
add sparc md servers.

Add empty set lists for ports that already have distribution sets.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors in case of HAVE_XORG_SERVER_VER=110.
(Note these ports have been switched to HAVE_XORG_SERVER_VER=120)

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Restore the pnozz Xorg driver, now that it has EXA support.

branches: 1.74.4;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to sparc machine dependency files

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.68.2; 1.68.4;
glint is enabled both xorg-server 1.10 and 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

mark pnozz obsolete on xorg-server 1.18

makr pnozz, ag10e, sunleo as 1.10 only

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.59.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

update sets and reachover makefiles for mesa 10.3.5.

branches: 1.56.4;
Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.51.2; 1.51.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

updates for Mesa 7.7.1.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

add entries for the suncg14 driver
This driver isn't actually useful yet - our kernel cgfourteen driver pretends
to be a cg8, I'll change that next.

Update for the addition of xf86-video-ws (hi mbalmer!).

add files for the sunleo driver

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

- build mesa_dri and swrast on all platforms
- kill imstt
- re-add int10 on macppc

add pnozz and suntcx drivers

install the xorg "protocol.txt" file.

remove libint10 libraries that are not needed for sparc*.

unobsolete libglx

- build and install swrast_dri.so
- don't force linking dri_util.c into swrast_dri.so
- fix the source lists in libGL/OSmesa makefiles
- unobsolete the symbols/pc keymap and 7x14-KOI8-R.pcf.gz font

XXX the libGL/OSmesa makefiles could use some reorg. there
XXX are a bunch of duplicated items.

merge all the changes for xorg-server 1.6

from yorick hardy:
- build mesa_dri.so, saving ~1.8MB per module (yay, the size of the
xsetrver set goes down massively now)
- use the right includes so that dri * mesa use the same headers
- correct LIBDPLIBS for libdri

tested by jmcneill, and builds fine for me.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.30.2;
Install the Cards file used by xorgconfig.

add entries for the AG-10e driver and man page

fix file list for xorg
( note: this is compile-tested only and the only useful driver would be
suncg6. There's a good chance it will Just Work on a wscons kernel
though )

branches: 1.27.2; 1.27.6;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

sort various files (before adding new entries)

branches: 1.21.8; 1.21.12;
let build.sh build the ag10e driver

branches: 1.20.4;
build sunffb and xf8_32wid on sparc

add some missing files

add entries for ATI drivers and man pages

branches: 1.17.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

Build XFree86 on NetBSD/sparc.
Tested on Krups and a SPARCbook 3GX
Works only with wscons kernels, currently there's official support on Krups
with igsfb and more or less official support for SPARCbooks with pnozz and
SPARCstations with cgsix.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Move X server related stuff from xbase/md.sparc -> xserver/md.sparc.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

move xvidtune to xserver/mi since it's installed by all machines

XXX we may want to not install it at all, but this is better than
having it spread across xbase for some machines and xserver
for others in various md.<mach> files.

sparc x set lists

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

support XF4 on sparc. had to move parts of x{base,comp}4/mi into the
relevant ports as they do not apply to sparc (or other non-"hw/xfree86"
ports.)

branches: 1.8.2;
Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.7.8;
Add a NetBSD RCS tag to each distrib list file.

sort files

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

To be consitent with the other sets:
- use ./usr and not usr
- remove duplicated directory entries

branches: 1.2.2;
add sparc md servers.

Add empty set lists for ports that already have distribution sets.

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Restore the pnozz Xorg driver, now that it has EXA support.

branches: 1.74.4;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to sparc machine dependency files

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.68.2; 1.68.4;
glint is enabled both xorg-server 1.10 and 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

mark pnozz obsolete on xorg-server 1.18

makr pnozz, ag10e, sunleo as 1.10 only

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.59.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

update sets and reachover makefiles for mesa 10.3.5.

branches: 1.56.4;
Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.51.2; 1.51.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

updates for Mesa 7.7.1.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

add entries for the suncg14 driver
This driver isn't actually useful yet - our kernel cgfourteen driver pretends
to be a cg8, I'll change that next.

Update for the addition of xf86-video-ws (hi mbalmer!).

add files for the sunleo driver

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

- build mesa_dri and swrast on all platforms
- kill imstt
- re-add int10 on macppc

add pnozz and suntcx drivers

install the xorg "protocol.txt" file.

remove libint10 libraries that are not needed for sparc*.

unobsolete libglx

- build and install swrast_dri.so
- don't force linking dri_util.c into swrast_dri.so
- fix the source lists in libGL/OSmesa makefiles
- unobsolete the symbols/pc keymap and 7x14-KOI8-R.pcf.gz font

XXX the libGL/OSmesa makefiles could use some reorg. there
XXX are a bunch of duplicated items.

merge all the changes for xorg-server 1.6

from yorick hardy:
- build mesa_dri.so, saving ~1.8MB per module (yay, the size of the
xsetrver set goes down massively now)
- use the right includes so that dri * mesa use the same headers
- correct LIBDPLIBS for libdri

tested by jmcneill, and builds fine for me.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.30.2;
Install the Cards file used by xorgconfig.

add entries for the AG-10e driver and man page

fix file list for xorg
( note: this is compile-tested only and the only useful driver would be
suncg6. There's a good chance it will Just Work on a wscons kernel
though )

branches: 1.27.2; 1.27.6;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

sort various files (before adding new entries)

branches: 1.21.8; 1.21.12;
let build.sh build the ag10e driver

branches: 1.20.4;
build sunffb and xf8_32wid on sparc

add some missing files

add entries for ATI drivers and man pages

branches: 1.17.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

Build XFree86 on NetBSD/sparc.
Tested on Krups and a SPARCbook 3GX
Works only with wscons kernels, currently there's official support on Krups
with igsfb and more or less official support for SPARCbooks with pnozz and
SPARCstations with cgsix.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Move X server related stuff from xbase/md.sparc -> xserver/md.sparc.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

move xvidtune to xserver/mi since it's installed by all machines

XXX we may want to not install it at all, but this is better than
having it spread across xbase for some machines and xserver
for others in various md.<mach> files.

sparc x set lists

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

support XF4 on sparc. had to move parts of x{base,comp}4/mi into the
relevant ports as they do not apply to sparc (or other non-"hw/xfree86"
ports.)

branches: 1.8.2;
Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.7.8;
Add a NetBSD RCS tag to each distrib list file.

sort files

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

To be consitent with the other sets:
- use ./usr and not usr
- remove duplicated directory entries

branches: 1.2.2;
add sparc md servers.

Add empty set lists for ports that already have distribution sets.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Restore the pnozz Xorg driver, now that it has EXA support.

branches: 1.74.4;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to sparc machine dependency files

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.68.2; 1.68.4;
glint is enabled both xorg-server 1.10 and 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

mark pnozz obsolete on xorg-server 1.18

makr pnozz, ag10e, sunleo as 1.10 only

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.59.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

update sets and reachover makefiles for mesa 10.3.5.

branches: 1.56.4;
Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.51.2; 1.51.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

updates for Mesa 7.7.1.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

add entries for the suncg14 driver
This driver isn't actually useful yet - our kernel cgfourteen driver pretends
to be a cg8, I'll change that next.

Update for the addition of xf86-video-ws (hi mbalmer!).

add files for the sunleo driver

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

- build mesa_dri and swrast on all platforms
- kill imstt
- re-add int10 on macppc

add pnozz and suntcx drivers

install the xorg "protocol.txt" file.

remove libint10 libraries that are not needed for sparc*.

unobsolete libglx

- build and install swrast_dri.so
- don't force linking dri_util.c into swrast_dri.so
- fix the source lists in libGL/OSmesa makefiles
- unobsolete the symbols/pc keymap and 7x14-KOI8-R.pcf.gz font

XXX the libGL/OSmesa makefiles could use some reorg. there
XXX are a bunch of duplicated items.

merge all the changes for xorg-server 1.6

from yorick hardy:
- build mesa_dri.so, saving ~1.8MB per module (yay, the size of the
xsetrver set goes down massively now)
- use the right includes so that dri * mesa use the same headers
- correct LIBDPLIBS for libdri

tested by jmcneill, and builds fine for me.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.30.2;
Install the Cards file used by xorgconfig.

add entries for the AG-10e driver and man page

fix file list for xorg
( note: this is compile-tested only and the only useful driver would be
suncg6. There's a good chance it will Just Work on a wscons kernel
though )

branches: 1.27.2; 1.27.6;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

sort various files (before adding new entries)

branches: 1.21.8; 1.21.12;
let build.sh build the ag10e driver

branches: 1.20.4;
build sunffb and xf8_32wid on sparc

add some missing files

add entries for ATI drivers and man pages

branches: 1.17.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

Build XFree86 on NetBSD/sparc.
Tested on Krups and a SPARCbook 3GX
Works only with wscons kernels, currently there's official support on Krups
with igsfb and more or less official support for SPARCbooks with pnozz and
SPARCstations with cgsix.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Move X server related stuff from xbase/md.sparc -> xserver/md.sparc.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

move xvidtune to xserver/mi since it's installed by all machines

XXX we may want to not install it at all, but this is better than
having it spread across xbase for some machines and xserver
for others in various md.<mach> files.

sparc x set lists

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

support XF4 on sparc. had to move parts of x{base,comp}4/mi into the
relevant ports as they do not apply to sparc (or other non-"hw/xfree86"
ports.)

branches: 1.8.2;
Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.7.8;
Add a NetBSD RCS tag to each distrib list file.

sort files

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

To be consitent with the other sets:
- use ./usr and not usr
- remove duplicated directory entries

branches: 1.2.2;
add sparc md servers.

Add empty set lists for ports that already have distribution sets.

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Restore the pnozz Xorg driver, now that it has EXA support.

branches: 1.74.4;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to sparc machine dependency files

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.68.2; 1.68.4;
glint is enabled both xorg-server 1.10 and 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

mark pnozz obsolete on xorg-server 1.18

makr pnozz, ag10e, sunleo as 1.10 only

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.59.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

update sets and reachover makefiles for mesa 10.3.5.

branches: 1.56.4;
Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.51.2; 1.51.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

updates for Mesa 7.7.1.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

add entries for the suncg14 driver
This driver isn't actually useful yet - our kernel cgfourteen driver pretends
to be a cg8, I'll change that next.

Update for the addition of xf86-video-ws (hi mbalmer!).

add files for the sunleo driver

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

- build mesa_dri and swrast on all platforms
- kill imstt
- re-add int10 on macppc

add pnozz and suntcx drivers

install the xorg "protocol.txt" file.

remove libint10 libraries that are not needed for sparc*.

unobsolete libglx

- build and install swrast_dri.so
- don't force linking dri_util.c into swrast_dri.so
- fix the source lists in libGL/OSmesa makefiles
- unobsolete the symbols/pc keymap and 7x14-KOI8-R.pcf.gz font

XXX the libGL/OSmesa makefiles could use some reorg. there
XXX are a bunch of duplicated items.

merge all the changes for xorg-server 1.6

from yorick hardy:
- build mesa_dri.so, saving ~1.8MB per module (yay, the size of the
xsetrver set goes down massively now)
- use the right includes so that dri * mesa use the same headers
- correct LIBDPLIBS for libdri

tested by jmcneill, and builds fine for me.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.30.2;
Install the Cards file used by xorgconfig.

add entries for the AG-10e driver and man page

fix file list for xorg
( note: this is compile-tested only and the only useful driver would be
suncg6. There's a good chance it will Just Work on a wscons kernel
though )

branches: 1.27.2; 1.27.6;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

sort various files (before adding new entries)

branches: 1.21.8; 1.21.12;
let build.sh build the ag10e driver

branches: 1.20.4;
build sunffb and xf8_32wid on sparc

add some missing files

add entries for ATI drivers and man pages

branches: 1.17.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

Build XFree86 on NetBSD/sparc.
Tested on Krups and a SPARCbook 3GX
Works only with wscons kernels, currently there's official support on Krups
with igsfb and more or less official support for SPARCbooks with pnozz and
SPARCstations with cgsix.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Move X server related stuff from xbase/md.sparc -> xserver/md.sparc.

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

move xvidtune to xserver/mi since it's installed by all machines

XXX we may want to not install it at all, but this is better than
having it spread across xbase for some machines and xserver
for others in various md.<mach> files.

sparc x set lists

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

support XF4 on sparc. had to move parts of x{base,comp}4/mi into the
relevant ports as they do not apply to sparc (or other non-"hw/xfree86"
ports.)

branches: 1.8.2;
Move "rgb.db" from xbase to xserver. In its Berkeley DB compiled form, it
is used only by the X server, and should be grouped there. Later we may
also add unconditional install of the source-form "rgb.txt", usable by all
programs, into xbase.

This allows the xbase set to be shared between the mipsel platforms, and all
m68k platforms except atari (which has additional XF86 add-ons).

branches: 1.7.8;
Add a NetBSD RCS tag to each distrib list file.

sort files

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

To be consitent with the other sets:
- use ./usr and not usr
- remove duplicated directory entries

branches: 1.2.2;
add sparc md servers.

Add empty set lists for ports that already have distribution sets.

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Restore the pnozz Xorg driver, now that it has EXA support.

branches: 1.74.4;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to sparc machine dependency files

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.68.2; 1.68.4;
glint is enabled both xorg-server 1.10 and 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

mark pnozz obsolete on xorg-server 1.18

makr pnozz, ag10e, sunleo as 1.10 only

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.59.2;
properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

update sets and reachover makefiles for mesa 10.3.5.

branches: 1.56.4;
Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.51.2; 1.51.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

updates for Mesa 7.7.1.