distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

Also put back libfb.a in xorg_server_ver=110 case.

It looks required only on building Xorg server binary and
unnecessary for release (actually marked as obsolete only on vax),
but no simple settings to "build static libraries without installation"
and most ports will be switched to Xorg 1.20 soon.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

branches: 1.69.2;
revert part of the previous - sgimips is still default to xorg-server 1.10.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

add the newport driver

branches: 1.25.2;
Install the Cards file used by xorgconfig.

add Xorg bits

branches: 1.23.2;
build and install the libGLcore server module

add entries for the libglx extension module in xorg

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries

fix wrong tag for wsfb.4

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.14.12; 1.14.16;
Fix wsfb names properly.

sgimips uses dlopen() for shared objects; fix wsfb shared object name.

build wsfb on sgimips
needs testing

All of the X11 obsolete set lists are installed now.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.8.2; 1.8.4;
+ correct set lists for sgimips src/x11.

branches: 1.7.2;
+ add lib{shadow,layer}.a into appropriate x11 md set lists

Modify to reflect loadable module support.

Add mmapw - mmapr is already there. Discovered while trying to build 2.0.

branches: 1.4.2;
All of mipseb builds Xvfb

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add sgimips specific contents for xsets.

Also put back libfb.a in xorg_server_ver=110 case.

It looks required only on building Xorg server binary and
unnecessary for release (actually marked as obsolete only on vax),
but no simple settings to "build static libraries without installation"
and most ports will be switched to Xorg 1.20 soon.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

revert part of the previous - sgimips is still default to xorg-server 1.10.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

add the newport driver

branches: 1.25.2;
Install the Cards file used by xorgconfig.

add Xorg bits

branches: 1.23.2;
build and install the libGLcore server module

add entries for the libglx extension module in xorg

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries

fix wrong tag for wsfb.4

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.14.12; 1.14.16;
Fix wsfb names properly.

sgimips uses dlopen() for shared objects; fix wsfb shared object name.

build wsfb on sgimips
needs testing

All of the X11 obsolete set lists are installed now.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.8.2; 1.8.4;
+ correct set lists for sgimips src/x11.

branches: 1.7.2;
+ add lib{shadow,layer}.a into appropriate x11 md set lists

Modify to reflect loadable module support.

Add mmapw - mmapr is already there. Discovered while trying to build 2.0.

branches: 1.4.2;
All of mipseb builds Xvfb

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add sgimips specific contents for xsets.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

revert part of the previous - sgimips is still default to xorg-server 1.10.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

add the newport driver

branches: 1.25.2;
Install the Cards file used by xorgconfig.

add Xorg bits

branches: 1.23.2;
build and install the libGLcore server module

add entries for the libglx extension module in xorg

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries

fix wrong tag for wsfb.4

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.14.12; 1.14.16;
Fix wsfb names properly.

sgimips uses dlopen() for shared objects; fix wsfb shared object name.

build wsfb on sgimips
needs testing

All of the X11 obsolete set lists are installed now.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.8.2; 1.8.4;
+ correct set lists for sgimips src/x11.

branches: 1.7.2;
+ add lib{shadow,layer}.a into appropriate x11 md set lists

Modify to reflect loadable module support.

Add mmapw - mmapr is already there. Discovered while trying to build 2.0.

branches: 1.4.2;
All of mipseb builds Xvfb

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add sgimips specific contents for xsets.

revert part of the previous - sgimips is still default to xorg-server 1.10.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

add the newport driver

branches: 1.25.2;
Install the Cards file used by xorgconfig.

add Xorg bits

branches: 1.23.2;
build and install the libGLcore server module

add entries for the libglx extension module in xorg

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries

fix wrong tag for wsfb.4

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.14.12; 1.14.16;
Fix wsfb names properly.

sgimips uses dlopen() for shared objects; fix wsfb shared object name.

build wsfb on sgimips
needs testing

All of the X11 obsolete set lists are installed now.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.8.2; 1.8.4;
+ correct set lists for sgimips src/x11.

branches: 1.7.2;
+ add lib{shadow,layer}.a into appropriate x11 md set lists

Modify to reflect loadable module support.

Add mmapw - mmapr is already there. Discovered while trying to build 2.0.

branches: 1.4.2;
All of mipseb builds Xvfb

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add sgimips specific contents for xsets.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

add the newport driver

branches: 1.25.2;
Install the Cards file used by xorgconfig.

add Xorg bits

branches: 1.23.2;
build and install the libGLcore server module

add entries for the libglx extension module in xorg

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries

fix wrong tag for wsfb.4

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.14.12; 1.14.16;
Fix wsfb names properly.

sgimips uses dlopen() for shared objects; fix wsfb shared object name.

build wsfb on sgimips
needs testing

All of the X11 obsolete set lists are installed now.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.8.2; 1.8.4;
+ correct set lists for sgimips src/x11.

branches: 1.7.2;
+ add lib{shadow,layer}.a into appropriate x11 md set lists

Modify to reflect loadable module support.

Add mmapw - mmapr is already there. Discovered while trying to build 2.0.

branches: 1.4.2;
All of mipseb builds Xvfb

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add sgimips specific contents for xsets.

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

add the newport driver

branches: 1.25.2;
Install the Cards file used by xorgconfig.

add Xorg bits

branches: 1.23.2;
build and install the libGLcore server module

add entries for the libglx extension module in xorg

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries

fix wrong tag for wsfb.4

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.14.12; 1.14.16;
Fix wsfb names properly.

sgimips uses dlopen() for shared objects; fix wsfb shared object name.

build wsfb on sgimips
needs testing

All of the X11 obsolete set lists are installed now.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.8.2; 1.8.4;
+ correct set lists for sgimips src/x11.

branches: 1.7.2;
+ add lib{shadow,layer}.a into appropriate x11 md set lists

Modify to reflect loadable module support.

Add mmapw - mmapr is already there. Discovered while trying to build 2.0.

branches: 1.4.2;
All of mipseb builds Xvfb

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add sgimips specific contents for xsets.

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.58.2; 1.58.4;
fixes for xorg-server 1.18.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

More sets list sorting (maybe this time they're really all done)

try to fix copy-pasto

build fixes for sgimips and xorg-server 1.18.
newport and crime need to be ported away from XAA.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.49.2;
build some drivers for PCI graphics chips, now that they could be useful
TODO: fix up MMIO stuff to deal with MACE PCI's endianness twiddling

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Remove unneeded xfree/xorg dga(1) entries from xserver md lists.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Link the xf86-input-ws X.Org input driver to the build and add it to the lists
that also have the wsmouse driver.

xf86-input-ws adds support for touchpanels in X11 that report absolute position
data through wscons(4), e.g. the extended ums(4) driver. xf86-input-ws was
written by Matthieu Herrb for OpenBSD.

Please remember to also update xsrc before the next system build.

Fix typo: obslete -> obsolete.

Obsolete is obsolete. Remove an unnecessary ",xorg" from libint10_g.a.

we don't build libtin10 and xorgconfig on sgimips

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

install the xorg "protocol.txt" file.

unobsolete libglx

merge all the changes for xorg-server 1.6

forgot the newport man page