Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors in case of HAVE_XORG_SERVER_VER=110.
(Note these ports have been switched to HAVE_XORG_SERVER_VER=120)

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Done giving syspkg names without xorg_server_ver=110

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Done giving syspkg names without xorg_server_ver=110

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Done giving syspkg names without xorg_server_ver=110

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

xorg-server: Add xorg.conf.d(5) MLINKS.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Done giving syspkg names without xorg_server_ver=110

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Done giving syspkg names without xorg_server_ver=110

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

Done giving syspkg names without xorg_server_ver=110

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

Give syspkg names to xserver without machine dependet files

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12; 1.25.14;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.25.12;
move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.20.2;
no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.14.2; 1.14.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

Provide port-specific sample xorg.conf files in xserver.tgz.

No particular comments on tech-x11.

Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

As all port now build Xvfb, move it into the mi file.
Remove any empty md.* files (but leave ad.*)

branches: 1.8.4;
Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

mark all src/x11 built files with "x11" tag.

branches: 1.5.36; 1.5.40;
Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

add that pesky X symlink

xserver set list for dreamcast

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

Add lists for Xdreamcast server and some related files.

Sync with wrstuden-revivesa-base-2.

Sync with HEAD.

Sync with HEAD.

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

Rebase to HEAD as of a few days ago.

resync with head

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")

sync with head