distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

also enable xf86-video-trident for xorg-server 21 builds, it builds fine.

xf86-video-ark builds with xorg-server 21.

enable it where it was diabled: x86, alpha, cats.

branches: 1.72.2;
Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors in case of HAVE_XORG_SERVER_VER=110.
(Note these ports have been switched to HAVE_XORG_SERVER_VER=120)

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

MKDEBUGLIB=yes fixes.

Another attempt to fix ws fallout.

Bring the xorg entries up to date.

cats doesn't run under vmware, so nuke references to the vmware driver.

Update for the addition of xf86-video-ws (hi mbalmer!).

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

Install manpage for the Xorg S3 driver.

install the xorg "protocol.txt" file.

don't build the vga or nsc drivers -- they haven't been ported to
xorg-server 1.6 yet. remove them from the list of drivers to try
to load with "X -configure". (someone should also confirm that
this list of drivers is right.)

this should fix PR#41626.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.26.2;
Install the Cards file used by xorgconfig.

branches: 1.25.2;
Add radeonhd_drv and change the name of some cirrus subdrivers by
removing the _drv part for cirrus_alpine and cirrus_laguna

- add exa cat,man,html entries (from hubertf@)
- sort and make uniq
- remove commented out Xmacppc

Note intsallation of the exa module.

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries
* remove pointless "obsolete" X11R7 entries

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.15.20; 1.15.24;
Kill trailing whitespace.

branches: 1.14.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

All of the X11 obsolete set lists are installed now.

Add new files installed after import of XFree86 4.5.0.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.9.2;
+ add riva128 submodule patch from Dieter Roelants
+ add riva128.o submodule to md set lists
should resolve pr#28808

Obsolete the short-lived wsfb.o.

XXX this mechanism sucks. fixed under duress.

Rename wsfb.o to wsfb_drv.o.
Add wsfb man and cat pages.

Add "./usr/X11R6/lib/modules/drivers/wsfb.o".

+ add lib{shadow,layer}.a into appropriate x11 md set lists

branches: 1.4.4;
Xvfb is built on all arm platforms. Reference it out of ad.arm instead of an
md.X file per machine.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add set files for cross building X for cats.

also enable xf86-video-trident for xorg-server 21 builds, it builds fine.

xf86-video-ark builds with xorg-server 21.

enable it where it was diabled: x86, alpha, cats.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors in case of HAVE_XORG_SERVER_VER=110.
(Note these ports have been switched to HAVE_XORG_SERVER_VER=120)

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

MKDEBUGLIB=yes fixes.

Another attempt to fix ws fallout.

Bring the xorg entries up to date.

cats doesn't run under vmware, so nuke references to the vmware driver.

Update for the addition of xf86-video-ws (hi mbalmer!).

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

Install manpage for the Xorg S3 driver.

install the xorg "protocol.txt" file.

don't build the vga or nsc drivers -- they haven't been ported to
xorg-server 1.6 yet. remove them from the list of drivers to try
to load with "X -configure". (someone should also confirm that
this list of drivers is right.)

this should fix PR#41626.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.26.2;
Install the Cards file used by xorgconfig.

branches: 1.25.2;
Add radeonhd_drv and change the name of some cirrus subdrivers by
removing the _drv part for cirrus_alpine and cirrus_laguna

- add exa cat,man,html entries (from hubertf@)
- sort and make uniq
- remove commented out Xmacppc

Note intsallation of the exa module.

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries
* remove pointless "obsolete" X11R7 entries

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.15.20; 1.15.24;
Kill trailing whitespace.

branches: 1.14.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

All of the X11 obsolete set lists are installed now.

Add new files installed after import of XFree86 4.5.0.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.9.2;
+ add riva128 submodule patch from Dieter Roelants
+ add riva128.o submodule to md set lists
should resolve pr#28808

Obsolete the short-lived wsfb.o.

XXX this mechanism sucks. fixed under duress.

Rename wsfb.o to wsfb_drv.o.
Add wsfb man and cat pages.

Add "./usr/X11R6/lib/modules/drivers/wsfb.o".

+ add lib{shadow,layer}.a into appropriate x11 md set lists

branches: 1.4.4;
Xvfb is built on all arm platforms. Reference it out of ad.arm instead of an
md.X file per machine.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add set files for cross building X for cats.

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors in case of HAVE_XORG_SERVER_VER=110.
(Note these ports have been switched to HAVE_XORG_SERVER_VER=120)

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

MKDEBUGLIB=yes fixes.

Another attempt to fix ws fallout.

Bring the xorg entries up to date.

cats doesn't run under vmware, so nuke references to the vmware driver.

Update for the addition of xf86-video-ws (hi mbalmer!).

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

Install manpage for the Xorg S3 driver.

install the xorg "protocol.txt" file.

don't build the vga or nsc drivers -- they haven't been ported to
xorg-server 1.6 yet. remove them from the list of drivers to try
to load with "X -configure". (someone should also confirm that
this list of drivers is right.)

this should fix PR#41626.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.26.2;
Install the Cards file used by xorgconfig.

branches: 1.25.2;
Add radeonhd_drv and change the name of some cirrus subdrivers by
removing the _drv part for cirrus_alpine and cirrus_laguna

- add exa cat,man,html entries (from hubertf@)
- sort and make uniq
- remove commented out Xmacppc

Note intsallation of the exa module.

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries
* remove pointless "obsolete" X11R7 entries

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.15.20; 1.15.24;
Kill trailing whitespace.

branches: 1.14.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

All of the X11 obsolete set lists are installed now.

Add new files installed after import of XFree86 4.5.0.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.9.2;
+ add riva128 submodule patch from Dieter Roelants
+ add riva128.o submodule to md set lists
should resolve pr#28808

Obsolete the short-lived wsfb.o.

XXX this mechanism sucks. fixed under duress.

Rename wsfb.o to wsfb_drv.o.
Add wsfb man and cat pages.

Add "./usr/X11R6/lib/modules/drivers/wsfb.o".

+ add lib{shadow,layer}.a into appropriate x11 md set lists

branches: 1.4.4;
Xvfb is built on all arm platforms. Reference it out of ad.arm instead of an
md.X file per machine.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add set files for cross building X for cats.

Obsolete ati_drv.so.19 and add .22 in the other md.* files affected
by the recentish X update.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

MKDEBUGLIB=yes fixes.

Another attempt to fix ws fallout.

Bring the xorg entries up to date.

cats doesn't run under vmware, so nuke references to the vmware driver.

Update for the addition of xf86-video-ws (hi mbalmer!).

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

Install manpage for the Xorg S3 driver.

install the xorg "protocol.txt" file.

don't build the vga or nsc drivers -- they haven't been ported to
xorg-server 1.6 yet. remove them from the list of drivers to try
to load with "X -configure". (someone should also confirm that
this list of drivers is right.)

this should fix PR#41626.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.26.2;
Install the Cards file used by xorgconfig.

branches: 1.25.2;
Add radeonhd_drv and change the name of some cirrus subdrivers by
removing the _drv part for cirrus_alpine and cirrus_laguna

- add exa cat,man,html entries (from hubertf@)
- sort and make uniq
- remove commented out Xmacppc

Note intsallation of the exa module.

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries
* remove pointless "obsolete" X11R7 entries

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.15.20; 1.15.24;
Kill trailing whitespace.

branches: 1.14.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

All of the X11 obsolete set lists are installed now.

Add new files installed after import of XFree86 4.5.0.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.9.2;
+ add riva128 submodule patch from Dieter Roelants
+ add riva128.o submodule to md set lists
should resolve pr#28808

Obsolete the short-lived wsfb.o.

XXX this mechanism sucks. fixed under duress.

Rename wsfb.o to wsfb_drv.o.
Add wsfb man and cat pages.

Add "./usr/X11R6/lib/modules/drivers/wsfb.o".

+ add lib{shadow,layer}.a into appropriate x11 md set lists

branches: 1.4.4;
Xvfb is built on all arm platforms. Reference it out of ad.arm instead of an
md.X file per machine.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add set files for cross building X for cats.

updates for xorg-server 21.1.3.

also move cvt manual parts into the xbase set.

fix sets after making cvt(1) for everyone

remove duplicate entries for Xorg and gtf

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

MKDEBUGLIB=yes fixes.

Another attempt to fix ws fallout.

Bring the xorg entries up to date.

cats doesn't run under vmware, so nuke references to the vmware driver.

Update for the addition of xf86-video-ws (hi mbalmer!).

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

Install manpage for the Xorg S3 driver.

install the xorg "protocol.txt" file.

don't build the vga or nsc drivers -- they haven't been ported to
xorg-server 1.6 yet. remove them from the list of drivers to try
to load with "X -configure". (someone should also confirm that
this list of drivers is right.)

this should fix PR#41626.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.26.2;
Install the Cards file used by xorgconfig.

branches: 1.25.2;
Add radeonhd_drv and change the name of some cirrus subdrivers by
removing the _drv part for cirrus_alpine and cirrus_laguna

- add exa cat,man,html entries (from hubertf@)
- sort and make uniq
- remove commented out Xmacppc

Note intsallation of the exa module.

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries
* remove pointless "obsolete" X11R7 entries

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.15.20; 1.15.24;
Kill trailing whitespace.

branches: 1.14.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

All of the X11 obsolete set lists are installed now.

Add new files installed after import of XFree86 4.5.0.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.9.2;
+ add riva128 submodule patch from Dieter Roelants
+ add riva128.o submodule to md set lists
should resolve pr#28808

Obsolete the short-lived wsfb.o.

XXX this mechanism sucks. fixed under duress.

Rename wsfb.o to wsfb_drv.o.
Add wsfb man and cat pages.

Add "./usr/X11R6/lib/modules/drivers/wsfb.o".

+ add lib{shadow,layer}.a into appropriate x11 md set lists

branches: 1.4.4;
Xvfb is built on all arm platforms. Reference it out of ad.arm instead of an
md.X file per machine.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add set files for cross building X for cats.

bump the krb_drv.so version (oops forgot to commit this yesterday.)

should fix most of the 46 builds broken currently..

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.

no longer build a bunch of xorg-server twice (for .a and _pic.a).
entirely obsolete installing libi2c since it's builtin.

libfb, libdri and libdri2 all want to be both .a for the Xorg link
and .so for the run-time, i didn't really look too closely.

remove a bunch of duplicated set list entries.

i built a bunch of platforms for this, and i think i got the sets
lists updates correct, including for debug sets, but it's probable
that i broke something.

XXX: pullup to netbsd-7, but not critical

Drop superflous "picinstall" flag on "obsolete" items

Reported by apb@, thanks!

Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

Add debug files

branches: 1.42.2; 1.42.8;
obsolete libxf8_16bpp.

move xorg-server.m4 into the MD files that build xorg-server.
this should fix most of the recent build issues on xorg without
xorg-server platforms.

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

tab/space

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

MKDEBUGLIB=yes fixes.

Another attempt to fix ws fallout.

Bring the xorg entries up to date.

cats doesn't run under vmware, so nuke references to the vmware driver.

Update for the addition of xf86-video-ws (hi mbalmer!).

move protocol.txt from xserver/md.* into xbase/mi, since it's built
on all Xorg platforms, not just ones using hw/xfree86.

reported by he@ and noticed by i understand 32 autobuilds.

Install manpage for the Xorg S3 driver.

install the xorg "protocol.txt" file.

don't build the vga or nsc drivers -- they haven't been ported to
xorg-server 1.6 yet. remove them from the list of drivers to try
to load with "X -configure". (someone should also confirm that
this list of drivers is right.)

this should fix PR#41626.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.26.2;
Install the Cards file used by xorgconfig.

branches: 1.25.2;
Add radeonhd_drv and change the name of some cirrus subdrivers by
removing the _drv part for cirrus_alpine and cirrus_laguna

- add exa cat,man,html entries (from hubertf@)
- sort and make uniq
- remove commented out Xmacppc

Note intsallation of the exa module.

Use "-obsolete-" instead of "-unknown-" as the syspkg tag for obsolete entries.
Suggested by Alan Barrett <apb>

* reformat the (non-comment) columns
* use "-unknown-" as the syspkg tag for obsolete entries for consistency
with in-use entries
* remove pointless "obsolete" X11R7 entries

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.
- add a bunch of xorg stuff for other platforms.

add the last of the xorg list entries

mark all src/x11 built files with "x11" tag.

branches: 1.15.20; 1.15.24;
Kill trailing whitespace.

branches: 1.14.2;
Enable build.sh -x building for the usbtablet driver new in xsrc

distrib/sets/lists/xserver/md.* to list the additional files for XFree86
using ports
share/mk/bsd.x11.mk and x11/... for the actual building

Contributes to closing PR xsrc/23964
Reviewed by tron@NetBSD.org

All of the X11 obsolete set lists are installed now.

Add new files installed after import of XFree86 4.5.0.

Move /var/db/obsolete/xserver in md sets for those archs that have it.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.9.2;
+ add riva128 submodule patch from Dieter Roelants
+ add riva128.o submodule to md set lists
should resolve pr#28808

Obsolete the short-lived wsfb.o.

XXX this mechanism sucks. fixed under duress.

Rename wsfb.o to wsfb_drv.o.
Add wsfb man and cat pages.

Add "./usr/X11R6/lib/modules/drivers/wsfb.o".

+ add lib{shadow,layer}.a into appropriate x11 md set lists

branches: 1.4.4;
Xvfb is built on all arm platforms. Reference it out of ad.arm instead of an
md.X file per machine.

Eliminate a lot of redundancy here. Xnest is built on every platform..So it
goes in mi

Don't include newport on non-sgimips. remove unneeded tings on sgimips.

Add set files for cross building X for cats.

updates for the merged cirrus driver (apline/laguna sub-drivers are gone.)

xorg-server: Add xorg.conf.d(5) MLINKS.

fix ati_drv version after switching to newer sources for everyone.

Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

Give syspkg names to xserver without machine dependet files

Change package name "-obsolete-" to "<category>-obsolete". It is a little step.

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

it is now called mga_drv.so.2.

branches: 1.57.2; 1.57.4;
mark ark_drv as obsolete in xorg-server 1.18

move xtrans.m4 to comp, since it gets installed with the headers.

PR/51770: Yorick Hardy: Install xtrans.m4 (needed by net/tigervnc)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

mark libxaa, librecord, libextmod, and libdbe as obsolete for xorg-server 1.10

branches: 1.51.2;
delete obsolete vga and radeonhd drivers.

updates for libdrm 2.4.62 and xf86-video-ast 1.0.1.

properly mark all libi2c files as obsolete.