apei(4), acpihed(4): Wire up man pages to build.

PR kern/58046: Missing APEI (ACPI Platform Error Interface) support

sets/man{,html}: Add gdbserver(1)

Add new ascaudio.html

updates for OpenSSL man pages

branches: 1.3.2;
Install the mkcsmapper.1 and mkesdb.1 manpages.

viac7temp(4): rewrite temperature sensor to read value from MSR instead of using
documented cpuid instruction and eax register.

This approach is adapted from linux via-cputemp.c, no official documentation is
currently available. However, msr value seems to work on all tested CPUs while
documented cpuid instruction typically reports 0, even for my C7-D CPU.
msr value seems to have temperature in Celsius in lower 24-bits without fraction
(thus "msr & 0xffffff;" is used).

Tested on my personal systems based on CPUs below (i386 and amd64):
C7-D 1.6GHz (i386 only), Nano X2 L4350E, Nano X2 U4300, U2300 Nano, KX-U6580.
Also got one response via email which was based on Nano X2 L4050 (VE-900).
Nano reports independent values for each core.
KX-U6580 seems to show the same value for all cores but more testing is needed.

Since it works on amd64 capable CPUs, adding driver to GENERIC kernel config.
Also moving viac7temp man page to x86 instead of i386 (with updates).
In theory the change should add support for all VIA Nano CPUs and Zhaoxin CPUs
at least up to KX-6000(G) series.

In the future I may need to introduce amd64 kernel module as well.

Plan to pullup to at least netbsd-10.

Patch mainly reviewed by riastradh.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

sets/man{,html}: Add gdbserver(1)

Add new ascaudio.html

updates for OpenSSL man pages

branches: 1.3.2;
Install the mkcsmapper.1 and mkesdb.1 manpages.

viac7temp(4): rewrite temperature sensor to read value from MSR instead of using
documented cpuid instruction and eax register.

This approach is adapted from linux via-cputemp.c, no official documentation is
currently available. However, msr value seems to work on all tested CPUs while
documented cpuid instruction typically reports 0, even for my C7-D CPU.
msr value seems to have temperature in Celsius in lower 24-bits without fraction
(thus "msr & 0xffffff;" is used).

Tested on my personal systems based on CPUs below (i386 and amd64):
C7-D 1.6GHz (i386 only), Nano X2 L4350E, Nano X2 U4300, U2300 Nano, KX-U6580.
Also got one response via email which was based on Nano X2 L4050 (VE-900).
Nano reports independent values for each core.
KX-U6580 seems to show the same value for all cores but more testing is needed.

Since it works on amd64 capable CPUs, adding driver to GENERIC kernel config.
Also moving viac7temp man page to x86 instead of i386 (with updates).
In theory the change should add support for all VIA Nano CPUs and Zhaoxin CPUs
at least up to KX-6000(G) series.

In the future I may need to introduce amd64 kernel module as well.

Plan to pullup to at least netbsd-10.

Patch mainly reviewed by riastradh.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

Add new ascaudio.html

updates for OpenSSL man pages

branches: 1.3.2;
Install the mkcsmapper.1 and mkesdb.1 manpages.

viac7temp(4): rewrite temperature sensor to read value from MSR instead of using
documented cpuid instruction and eax register.

This approach is adapted from linux via-cputemp.c, no official documentation is
currently available. However, msr value seems to work on all tested CPUs while
documented cpuid instruction typically reports 0, even for my C7-D CPU.
msr value seems to have temperature in Celsius in lower 24-bits without fraction
(thus "msr & 0xffffff;" is used).

Tested on my personal systems based on CPUs below (i386 and amd64):
C7-D 1.6GHz (i386 only), Nano X2 L4350E, Nano X2 U4300, U2300 Nano, KX-U6580.
Also got one response via email which was based on Nano X2 L4050 (VE-900).
Nano reports independent values for each core.
KX-U6580 seems to show the same value for all cores but more testing is needed.

Since it works on amd64 capable CPUs, adding driver to GENERIC kernel config.
Also moving viac7temp man page to x86 instead of i386 (with updates).
In theory the change should add support for all VIA Nano CPUs and Zhaoxin CPUs
at least up to KX-6000(G) series.

In the future I may need to introduce amd64 kernel module as well.

Plan to pullup to at least netbsd-10.

Patch mainly reviewed by riastradh.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

updates for OpenSSL man pages

branches: 1.3.2;
Install the mkcsmapper.1 and mkesdb.1 manpages.

viac7temp(4): rewrite temperature sensor to read value from MSR instead of using
documented cpuid instruction and eax register.

This approach is adapted from linux via-cputemp.c, no official documentation is
currently available. However, msr value seems to work on all tested CPUs while
documented cpuid instruction typically reports 0, even for my C7-D CPU.
msr value seems to have temperature in Celsius in lower 24-bits without fraction
(thus "msr & 0xffffff;" is used).

Tested on my personal systems based on CPUs below (i386 and amd64):
C7-D 1.6GHz (i386 only), Nano X2 L4350E, Nano X2 U4300, U2300 Nano, KX-U6580.
Also got one response via email which was based on Nano X2 L4050 (VE-900).
Nano reports independent values for each core.
KX-U6580 seems to show the same value for all cores but more testing is needed.

Since it works on amd64 capable CPUs, adding driver to GENERIC kernel config.
Also moving viac7temp man page to x86 instead of i386 (with updates).
In theory the change should add support for all VIA Nano CPUs and Zhaoxin CPUs
at least up to KX-6000(G) series.

In the future I may need to introduce amd64 kernel module as well.

Plan to pullup to at least netbsd-10.

Patch mainly reviewed by riastradh.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

Install the mkcsmapper.1 and mkesdb.1 manpages.

viac7temp(4): rewrite temperature sensor to read value from MSR instead of using
documented cpuid instruction and eax register.

This approach is adapted from linux via-cputemp.c, no official documentation is
currently available. However, msr value seems to work on all tested CPUs while
documented cpuid instruction typically reports 0, even for my C7-D CPU.
msr value seems to have temperature in Celsius in lower 24-bits without fraction
(thus "msr & 0xffffff;" is used).

Tested on my personal systems based on CPUs below (i386 and amd64):
C7-D 1.6GHz (i386 only), Nano X2 L4350E, Nano X2 U4300, U2300 Nano, KX-U6580.
Also got one response via email which was based on Nano X2 L4050 (VE-900).
Nano reports independent values for each core.
KX-U6580 seems to show the same value for all cores but more testing is needed.

Since it works on amd64 capable CPUs, adding driver to GENERIC kernel config.
Also moving viac7temp man page to x86 instead of i386 (with updates).
In theory the change should add support for all VIA Nano CPUs and Zhaoxin CPUs
at least up to KX-6000(G) series.

In the future I may need to introduce amd64 kernel module as well.

Plan to pullup to at least netbsd-10.

Patch mainly reviewed by riastradh.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

viac7temp(4): rewrite temperature sensor to read value from MSR instead of using
documented cpuid instruction and eax register.

This approach is adapted from linux via-cputemp.c, no official documentation is
currently available. However, msr value seems to work on all tested CPUs while
documented cpuid instruction typically reports 0, even for my C7-D CPU.
msr value seems to have temperature in Celsius in lower 24-bits without fraction
(thus "msr & 0xffffff;" is used).

Tested on my personal systems based on CPUs below (i386 and amd64):
C7-D 1.6GHz (i386 only), Nano X2 L4350E, Nano X2 U4300, U2300 Nano, KX-U6580.
Also got one response via email which was based on Nano X2 L4050 (VE-900).
Nano reports independent values for each core.
KX-U6580 seems to show the same value for all cores but more testing is needed.

Since it works on amd64 capable CPUs, adding driver to GENERIC kernel config.
Also moving viac7temp man page to x86 instead of i386 (with updates).
In theory the change should add support for all VIA Nano CPUs and Zhaoxin CPUs
at least up to KX-6000(G) series.

In the future I may need to introduce amd64 kernel module as well.

Plan to pullup to at least netbsd-10.

Patch mainly reviewed by riastradh.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).