#
1.10 |
|
04-Jul-2022 |
martin |
Build dtb files for the Tegra TX2
|
#
1.9 |
|
12-Nov-2021 |
jmcneill |
regen
|
#
1.8 |
|
07-Nov-2021 |
jmcneill |
dtb: Re-generate set lists for 5.15
|
Revision tags: cjep_sun2x-base1 cjep_sun2x-base
|
#
1.7 |
|
02-Jun-2021 |
jmcneill |
Install a copy of rk3399-pinebook-pro.dtb to the base dtb directory for compatibility with the factory firmware. Normally this is frowned upon, but this is the only easy way to boot NetBSD on this board without having to crack open the case and/or hook up a serial console.
|
Revision tags: cjep_staticlib_x-base1 cjep_staticlib_x-base thorpej-futex-base
|
#
1.6 |
|
02-Jan-2021 |
ryo |
add dts for odroid-N2 plus
|
#
1.5 |
|
02-Jan-2021 |
ryo |
revert http://mail-index.netbsd.org/source-changes/2021/01/01/msg125648.html
FYI: http://mail-index.netbsd.org/source-changes-d/2021/01/01/msg013085.html
|
#
1.4 |
|
01-Jan-2021 |
ryo |
add dts for odroid-N2 plus.
meson-g12b-odroid-n2-plus.dts of linux is not optimized for the odroid-N2plus CPU clock. and the dts for odroid-n2-plus in the hardkernel repository is significantly changed, so cannot be imported without modification. Therefore, a simple meson-g12b-odroid-n2-plus.dts has been added based on "meson-g12b-odroid-n2.dts" with only the cpu_opp_table and regulator table changed.
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
branches: 1.3.2; Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.9 |
|
12-Nov-2021 |
jmcneill |
regen
|
#
1.8 |
|
07-Nov-2021 |
jmcneill |
dtb: Re-generate set lists for 5.15
|
Revision tags: cjep_sun2x-base1 cjep_sun2x-base
|
#
1.7 |
|
02-Jun-2021 |
jmcneill |
Install a copy of rk3399-pinebook-pro.dtb to the base dtb directory for compatibility with the factory firmware. Normally this is frowned upon, but this is the only easy way to boot NetBSD on this board without having to crack open the case and/or hook up a serial console.
|
Revision tags: cjep_staticlib_x-base1 cjep_staticlib_x-base thorpej-futex-base
|
#
1.6 |
|
02-Jan-2021 |
ryo |
add dts for odroid-N2 plus
|
#
1.5 |
|
02-Jan-2021 |
ryo |
revert http://mail-index.netbsd.org/source-changes/2021/01/01/msg125648.html
FYI: http://mail-index.netbsd.org/source-changes-d/2021/01/01/msg013085.html
|
#
1.4 |
|
01-Jan-2021 |
ryo |
add dts for odroid-N2 plus.
meson-g12b-odroid-n2-plus.dts of linux is not optimized for the odroid-N2plus CPU clock. and the dts for odroid-n2-plus in the hardkernel repository is significantly changed, so cannot be imported without modification. Therefore, a simple meson-g12b-odroid-n2-plus.dts has been added based on "meson-g12b-odroid-n2.dts" with only the cpu_opp_table and regulator table changed.
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
branches: 1.3.2; Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.8 |
|
07-Nov-2021 |
jmcneill |
dtb: Re-generate set lists for 5.15
|
Revision tags: cjep_sun2x-base1 cjep_sun2x-base
|
#
1.7 |
|
02-Jun-2021 |
jmcneill |
Install a copy of rk3399-pinebook-pro.dtb to the base dtb directory for compatibility with the factory firmware. Normally this is frowned upon, but this is the only easy way to boot NetBSD on this board without having to crack open the case and/or hook up a serial console.
|
Revision tags: cjep_staticlib_x-base1 cjep_staticlib_x-base thorpej-futex-base
|
#
1.6 |
|
02-Jan-2021 |
ryo |
add dts for odroid-N2 plus
|
#
1.5 |
|
02-Jan-2021 |
ryo |
revert http://mail-index.netbsd.org/source-changes/2021/01/01/msg125648.html
FYI: http://mail-index.netbsd.org/source-changes-d/2021/01/01/msg013085.html
|
#
1.4 |
|
01-Jan-2021 |
ryo |
add dts for odroid-N2 plus.
meson-g12b-odroid-n2-plus.dts of linux is not optimized for the odroid-N2plus CPU clock. and the dts for odroid-n2-plus in the hardkernel repository is significantly changed, so cannot be imported without modification. Therefore, a simple meson-g12b-odroid-n2-plus.dts has been added based on "meson-g12b-odroid-n2.dts" with only the cpu_opp_table and regulator table changed.
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
branches: 1.3.2; Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
Revision tags: cjep_sun2x-base
|
#
1.7 |
|
02-Jun-2021 |
jmcneill |
Install a copy of rk3399-pinebook-pro.dtb to the base dtb directory for compatibility with the factory firmware. Normally this is frowned upon, but this is the only easy way to boot NetBSD on this board without having to crack open the case and/or hook up a serial console.
|
Revision tags: cjep_staticlib_x-base1 cjep_staticlib_x-base thorpej-futex-base
|
#
1.6 |
|
02-Jan-2021 |
ryo |
add dts for odroid-N2 plus
|
#
1.5 |
|
02-Jan-2021 |
ryo |
revert http://mail-index.netbsd.org/source-changes/2021/01/01/msg125648.html
FYI: http://mail-index.netbsd.org/source-changes-d/2021/01/01/msg013085.html
|
#
1.4 |
|
01-Jan-2021 |
ryo |
add dts for odroid-N2 plus.
meson-g12b-odroid-n2-plus.dts of linux is not optimized for the odroid-N2plus CPU clock. and the dts for odroid-n2-plus in the hardkernel repository is significantly changed, so cannot be imported without modification. Therefore, a simple meson-g12b-odroid-n2-plus.dts has been added based on "meson-g12b-odroid-n2.dts" with only the cpu_opp_table and regulator table changed.
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
branches: 1.3.2; Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.6 |
|
02-Jan-2021 |
ryo |
add dts for odroid-N2 plus
|
#
1.5 |
|
02-Jan-2021 |
ryo |
revert http://mail-index.netbsd.org/source-changes/2021/01/01/msg125648.html
FYI: http://mail-index.netbsd.org/source-changes-d/2021/01/01/msg013085.html
|
#
1.4 |
|
01-Jan-2021 |
ryo |
add dts for odroid-N2 plus.
meson-g12b-odroid-n2-plus.dts of linux is not optimized for the odroid-N2plus CPU clock. and the dts for odroid-n2-plus in the hardkernel repository is significantly changed, so cannot be imported without modification. Therefore, a simple meson-g12b-odroid-n2-plus.dts has been added based on "meson-g12b-odroid-n2.dts" with only the cpu_opp_table and regulator table changed.
|
Revision tags: thorpej-futex-base
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.4 |
|
01-Jan-2021 |
ryo |
add dts for odroid-N2 plus.
meson-g12b-odroid-n2-plus.dts of linux is not optimized for the odroid-N2plus CPU clock. and the dts for odroid-n2-plus in the hardkernel repository is significantly changed, so cannot be imported without modification. Therefore, a simple meson-g12b-odroid-n2-plus.dts has been added based on "meson-g12b-odroid-n2.dts" with only the cpu_opp_table and regulator table changed.
|
Revision tags: thorpej-futex-base
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.3 |
|
10-Jun-2020 |
jmcneill |
Build i.MX7D dtbs for armv7
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.2 |
|
22-May-2020 |
rin |
Regen
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
#
1.1 |
|
18-May-2020 |
jmcneill |
Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|