Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.30.64;
Use `\*[Am]' rather than `\*&' for ampersand.

Convert TNF licenses to new 2 clause variant

branches: 1.28.2; 1.28.6; 1.28.8;
Update URLs after website reorganization. patch by OKANO Takayoshi, from
PR 37070.

branches: 1.27.16; 1.27.18; 1.27.22;
netbsd.org->NetBSD.org

This is a complete refit of the mac68k documentation.

Of particular note is documentation on the new preferred method of
installation using sysinst, provided (and updated) by Bob Nestor.

clean up whitespace and formatting

branches: 1.24.2;
typo

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

branches: 1.21.8;
Add a note about 32-bit addressing when the Memory control panel does not
give you the option.

Should fix PR 6320 from John Refling (refling@comet.lbl.gov).

branches: 1.20.2;
Markup for -mdoc and -mdoc2html.

Add notes about steps to do after installation that are common to all
platforms; Thanks to Colin Wood and Simon Burge for their comments.

Revert the section from v1.8 that put my email address back into the
document, instead of the mailing list.

Fix an oversight in the multi-partition install procedure.
Noticed by Gunnar Helliesen <gunnar@bitcon.no>

RCS Id Police.

o Delete a reference to the non-existent intro(5)

Cleanup a minor nit

o Noted how to setup for X
o Brought legal up to date finally
o General cleanup

o Fix some lossage from the last commit
o Capitalize Ethernet

Resolve conflicts that somehow got committed (mmmm, CVS); add several
noteworthy contributors to the legal document; fix a few unclear
statements I noticed along the way.

o Updated for new release(7) directory hierarchy
o Noted procedure for configuring /etc/rc.conf on first boot

o Added a section on the X11 distribution sets to contents
o Added recently supported hardware
o Noted setup of rc.conf in install
o Added a new upgrade procedure
o Explained 1.3 enhancements in whatis
o Converted Mac-side utility names to be more version independent

branches: 1.8.2;
o Updated distribution notes to reflect latest installation procedures
and hardware support
o Made note of the X11 distribution sets in the contents section

Add critical information for successfully booting NetBSD/mac68k. (How
could this have been missed for so long?) Based on additions by Ken Nakata
<kenn@eden.rutgers.edu> in PRs 3839.

Remove my email address, giving a pointer to the port-mac68k list instead.

Updated booter information.

Second pass cleanup

Make a pass for 1.2.

branches: 1.2.4;
merge in changes from 1.1 release branch

branches: 1.1.1;
Initial revision

Use `\*[Am]' rather than `\*&' for ampersand.

Convert TNF licenses to new 2 clause variant

branches: 1.28.2; 1.28.6; 1.28.8;
Update URLs after website reorganization. patch by OKANO Takayoshi, from
PR 37070.

branches: 1.27.16; 1.27.18; 1.27.22;
netbsd.org->NetBSD.org

This is a complete refit of the mac68k documentation.

Of particular note is documentation on the new preferred method of
installation using sysinst, provided (and updated) by Bob Nestor.

clean up whitespace and formatting

branches: 1.24.2;
typo

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

branches: 1.21.8;
Add a note about 32-bit addressing when the Memory control panel does not
give you the option.

Should fix PR 6320 from John Refling (refling@comet.lbl.gov).

branches: 1.20.2;
Markup for -mdoc and -mdoc2html.

Add notes about steps to do after installation that are common to all
platforms; Thanks to Colin Wood and Simon Burge for their comments.

Revert the section from v1.8 that put my email address back into the
document, instead of the mailing list.

Fix an oversight in the multi-partition install procedure.
Noticed by Gunnar Helliesen <gunnar@bitcon.no>

RCS Id Police.

o Delete a reference to the non-existent intro(5)

Cleanup a minor nit

o Noted how to setup for X
o Brought legal up to date finally
o General cleanup

o Fix some lossage from the last commit
o Capitalize Ethernet

Resolve conflicts that somehow got committed (mmmm, CVS); add several
noteworthy contributors to the legal document; fix a few unclear
statements I noticed along the way.

o Updated for new release(7) directory hierarchy
o Noted procedure for configuring /etc/rc.conf on first boot

o Added a section on the X11 distribution sets to contents
o Added recently supported hardware
o Noted setup of rc.conf in install
o Added a new upgrade procedure
o Explained 1.3 enhancements in whatis
o Converted Mac-side utility names to be more version independent

branches: 1.8.2;
o Updated distribution notes to reflect latest installation procedures
and hardware support
o Made note of the X11 distribution sets in the contents section

Add critical information for successfully booting NetBSD/mac68k. (How
could this have been missed for so long?) Based on additions by Ken Nakata
<kenn@eden.rutgers.edu> in PRs 3839.

Remove my email address, giving a pointer to the port-mac68k list instead.

Updated booter information.

Second pass cleanup

Make a pass for 1.2.

branches: 1.2.4;
merge in changes from 1.1 release branch

branches: 1.1.1;
Initial revision

branches: 1.1.1.1.2; 1.1.1.1.4;
Make a pass at mac68k install documentation.

1.0 -> 1.1 and a few other minor updates.

Make a pass at mac68k install documentation.

file install was added on branch netbsd-1-0 on 1994-09-18 00:33:42 +0000

1.2 -> 1.2.1, foo12 -> foo121

Pullup request from Scott Reynolds <scottr@og.org>

>Several important changes didn't make it under the deadline for the release.

Pull up 1.18, per request of scottr.

Pull up 1.17 (ender)

Sync w/ trunk: don't reference non-existent documentation.

Pull rev 1.11 and 1.12 up from trunk (ender)

Pull rev 1.10 up from trunk (ender)

Pull rev 1.9 up from trunk (ender)

pullup 1.20->1.21 (ender)

Sync to HEAD as of 20001101 03:43 GMT [lukem]:
Complete rework of install notes for 1.5 from several authors.

Pull up revision 1.26 (requested by scottr in ticket #525):
This is a complete refit of the mac68k documentation.
Of particular note is documentation on the new preferred method of
installation using sysinst, provided (and updated) by Bob Nestor.

manually sync distrib/notes/** to -current, excluding pmppc (which isn't in 1.6)

sync with HEAD

Catch up to netbsd-4.0 release.

Pull up following revision(s) (requested by tsutsui in ticket #1219):
distrib/notes/common/main: revision 1.421
distrib/notes/mac68k/install: revision 1.30
distrib/notes/common/sysinst: revision 1.95
distrib/notes/i386/hardware: revision 1.124
Use `\*[Am]' rather than `\*&' for ampersand.

branches: 1.27.16.1.2;
Pull up following revisions (requested by jnemeth in ticket #1017):
distrib/notes/common/contents patch
distrib/notes/common/list-setsizes.sh patch
distrib/notes/pmppc/hardware patch
distrib/notes/Makefile.inc 1.39, 1.40
distrib/notes/acorn32/prep.RISCOS 1.18
distrib/notes/alpha/install 1.32
distrib/notes/common/main 1.367, 1.368, 1.370 - 1.382
distrib/notes/common/netboot 1.31
distrib/notes/common/postinstall 1.64, 1.65
distrib/notes/common/sysinst 1.82, 1.83
distrib/notes/common/xfer 1.58 - 1.60
distrib/notes/evbppc/hardware 1.3
distrib/notes/ews4800mips/hardware 1.2
distrib/notes/hp300/hardware 1.19
distrib/notes/hp300/prep 1.21
distrib/notes/hp700/hardware 1.3
distrib/notes/i386/hardware 1.121
distrib/notes/i386/whatis 1.22
distrib/notes/mac68k/hardware 1.23
distrib/notes/mac68k/install 1.28
distrib/notes/macppc/hardware 1.44
distrib/notes/macppc/install 1.36
distrib/notes/macppc/prep 1.42
distrib/notes/macppc/prep.OPENFIRMWARE 1.9
distrib/notes/news68k/hardware 1.5
distrib/notes/newsmips/hardware 1.4
distrib/notes/next68k/hardware 1.8
distrib/notes/pmax/install 1.39
distrib/notes/sandpoint/hardware 1.6
distrib/notes/sparc/hardware 1.33
distrib/notes/sparc64/hardware 1.23
distrib/notes/sparc64/install 1.28
distrib/notes/vax/xfer 1.13
Sync release notes with reality

Pull up following revision(s) (requested by tsutsui in ticket #1219):
distrib/notes/common/main: revision 1.421
distrib/notes/mac68k/install: revision 1.30
distrib/notes/common/sysinst: revision 1.95
distrib/notes/i386/hardware: revision 1.124
Use `\*[Am]' rather than `\*&' for ampersand.

sync with head.

Sync with HEAD.

Sync with HEAD.

Sync with HEAD.

Update URLs after website reorganization. patch by OKANO Takayoshi, from
PR 37070.

file install was added on branch mjf-devfs on 2007-12-14 21:15:59 +0000