Various style fixes (and some of VAX related errors and copy&pastos),
from Mouse on tech-install.

branches: 1.15.2;
Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

new dtb set needs reflecting in instructions

s/developement/development/

ARM -> Arm

Fix location of device trees

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

new dtb set needs reflecting in instructions

s/developement/development/

ARM -> Arm

Fix location of device trees

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

new dtb set needs reflecting in instructions

s/developement/development/

ARM -> Arm

Fix location of device trees

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

s/developement/development/

ARM -> Arm

Fix location of device trees

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

ARM -> Arm

Fix location of device trees

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Fix location of device trees

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

more contents

more modernization of evbarm install instructions

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.2; 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.4.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Fix a typo

Document debug sets and kernel module directory.

branches: 1.2.8; 1.2.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.1.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Pull up following revision(s) (requested by snj in ticket #799):
distrib/notes/Makefile.inc: revision 1.43
distrib/notes/acorn26/contents: revision 1.2
distrib/notes/acorn26/legal: delete
distrib/notes/acorn32/contents: revision 1.2
distrib/notes/acorn32/hardware: revision 1.3
distrib/notes/acorn32/legal: delete
distrib/notes/acorn32/prep: revision 1.15
distrib/notes/acorn32/prep.RISCOS: revision 1.23
distrib/notes/alpha/contents: revision 1.16
distrib/notes/alpha/hardware: revision 1.18
distrib/notes/alpha/legal: delete
distrib/notes/amd64/contents: revisions 1.4, 1.5
distrib/notes/amd64/legal: delete
distrib/notes/amiga/contents: revision 1.20
distrib/notes/amiga/legal: delete
distrib/notes/arc/contents: revision 1.2
distrib/notes/arc/legal: delete
distrib/notes/atari/contents: revision 1.20
distrib/notes/atari/legal: delete
distrib/notes/bebox/contents: revision 1.2
distrib/notes/bebox/hardware: revision 1.2
distrib/notes/bebox/legal: delete
distrib/notes/cats/contents: revision 1.2
distrib/notes/cats/legal: delete
distrib/notes/common/legal.common: revisions 1.93-1.96
distrib/notes/common/list-setsizes.sh: delete
distrib/notes/common/macros: revisions 1.41, 1.42
distrib/notes/common/main: revisions 1.519-1.521
distrib/notes/common/netboot: revision 1.36
distrib/notes/common/postinstall: revision 1.80, 1.81
distrib/notes/common/sysinst: revisions 1.105, 1.106
distrib/notes/common/upgrade: revisions 1.29, 1.30
distrib/notes/common/xfer: revision 1.74
distrib/notes/emips/contents: revision 1.2
distrib/notes/emips/hardware: revision 1.2
distrib/notes/emips/install: revision 1.2
distrib/notes/emips/legal: delete
distrib/notes/evbarm/contents: revision 1.2
distrib/notes/evbarm/legal: delete
distrib/notes/evbppc/contents: revision 1.3
distrib/notes/evbppc/legal: delete
distrib/notes/ews4800mips/contents: revision 1.2
distrib/notes/ews4800mips/legal: delete
distrib/notes/hp300/contents: revision 1.17
distrib/notes/hp300/legal: delete
distrib/notes/hpcarm/contents: revision 1.3
distrib/notes/hpcarm/legal: delete
distrib/notes/hpcmips/contents: revision 1.10
distrib/notes/hpcmips/legal: delete
distrib/notes/hpcsh/contents: revision 1.3
distrib/notes/hpcsh/legal: delete
distrib/notes/hppa/contents: revision 1.2
distrib/notes/hppa/legal: delete
distrib/notes/i386/contents: revision 1.29
distrib/notes/i386/legal: delete
distrib/notes/landisk/contents: revision 1.3
distrib/notes/landisk/legal: delete
distrib/notes/mac68k/contents: revision 1.20
distrib/notes/mac68k/hardware: revision 1.25
distrib/notes/mac68k/legal: delete
distrib/notes/mac68k/prep: revision 1.17
distrib/notes/macppc/contents: revision 1.11
distrib/notes/macppc/hardware: revision 1.48
distrib/notes/macppc/legal: delete
distrib/notes/macppc/prep.OPENFIRMWARE: revision 1.18
distrib/notes/mmeye/contents: revision 1.3
distrib/notes/mmeye/legal: delete
distrib/notes/mvme68k/contents: revision 1.13
distrib/notes/mvme68k/legal: delete
distrib/notes/mvme68k/xfer: revision 1.18
distrib/notes/news68k/contents: revision 1.6
distrib/notes/news68k/legal: delete
distrib/notes/newsmips/contents: revision 1.2
distrib/notes/newsmips/legal: delete
distrib/notes/next68k/contents: revision 1.7
distrib/notes/next68k/legal: delete
distrib/notes/ofppc/contents: revision 1.3
distrib/notes/ofppc/legal: delete
distrib/notes/pmax/contents: revision 1.17
distrib/notes/pmax/hardware: revision 1.18
distrib/notes/pmax/legal: delete
distrib/notes/prep/contents: revision 1.2
distrib/notes/prep/hardware: revision 1.5
distrib/notes/prep/legal: delete
distrib/notes/prep/upgrade: revision 1.2
distrib/notes/rs6000/contents: revision 1.2
distrib/notes/rs6000/legal: delete
distrib/notes/sandpoint/contents: revision 1.2
distrib/notes/sandpoint/legal: delete
distrib/notes/sgimips/contents: revision 1.2
distrib/notes/sgimips/legal: delete
distrib/notes/shark/contents: revision 1.2
distrib/notes/shark/legal: delete
distrib/notes/sparc/contents: revision 1.21
distrib/notes/sparc/hardware: revision 1.37
distrib/notes/sparc/legal: delete
distrib/notes/sparc/prep: revision 1.27
distrib/notes/sparc64/Makefile: revision 1.4
distrib/notes/sparc64/contents: revision 1.5
distrib/notes/sparc64/hardware: revision 1.28
distrib/notes/sparc64/legal: delete
distrib/notes/sun2/contents: revision 1.2
distrib/notes/sun2/legal: delete
distrib/notes/sun3/contents: revision 1.16
distrib/notes/sun3/legal: delete
distrib/notes/vax/contents: revision 1.11
distrib/notes/vax/hardware: revision 1.11
distrib/notes/vax/legal: delete
distrib/notes/x68k/contents: revision 1.17
distrib/notes/x68k/hardware: revision 1.18
distrib/notes/x68k/legal: delete
distrib/notes/xen/legal: delete
Remove reference to a 14 year old IP address for ftp.NetBSD.org.
This is not a joke.
--
mention etcupdate and reorder a bit
--
first pass de-suckification for 2015. modernize content a bit, fix dirty
rotten lies, improve wording, sync legalese with reality, yada yada yada.
--
This product includes software developed by Yasushi Yamasaki.
--
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes
--
finish removing the set size stuff, which was thrown out four years ago.
--
merge port-specific legal sections into the common file. most of these
entries were already in the common file, and it's a pain to maintain
them separately.
--
don't look for now-gone sparc/legal
--
restore rcsid accidentally deleted in previous
--
bah. this time without a typo.