fix various typos, mainly s/trasfering/transferring/ and s/theese/these/.

eXorcize and `` -> $()

Remove uses of test ... -a ... and test ... -o ...

branches: 1.25.40; 1.25.46; 1.25.48;
remove references to disktab.{preinstall,shadow}

Convert TNF licenses to new 2 clause variant

branches: 1.23.20; 1.23.22;
Instead of abusing the function md_prep_label(), create a new (optional)
md_view_labels() and a variable to mark its availability, so checking of
the available disklabels can be done before the root device is chosen.
Suggested by Martin Bertelsmann.

branches: 1.22.12; 1.22.16;
Make FQDN optional (PR#9823).

make sure . install.sub etc work regardless of PATH

branches: 1.20.2;
Actually use MDSETS, so that ports can install the x sets if useful

branches: 1.19.2;
Make it clearer what to answer to the "Device name: " prompt.

* Fix a typo.

* Present option to configure a swap device (a bit rude.. we only offer
partition `b', like we only consider `a' for root)

branches: 1.17.2;
Fix tipo inherited from old version of TNF copyright template.

Don't leave /etc/rc.conf "unconfigured".

* ftp setup: don't echo password
* network interface configuration:
- use new ifconfig(8) capabilities
- adapt to changed ifconfig(8) output
- use new config files (ifconfig.xxn)

Merge the netbsd-1-2 branch back into the mainline.

Pull md_install_sets() changes down from release branch.

sync with 1.2 branch

do md_install_sets.

Deal with install sets in `install_from_mounted_fs()' differently.
The sets are passed around in a global variable.
Remember installed sets across loads from different media.

Move all disklabel handling into install.md. Even the error messages
can be machine-dependent.

Insert filesystem type in munge_fstab.
Don't `ifconfig down' an active network interface (bad for diskless setup);
but use it to cull default IP address and netmask.

* Edit VERSION into install.sub while copying instead of using a
VERSION file.
* Set the EDITOR variable in install.sub, so it will be set in both
upgrade & install.
* Make the checks on the presence of installation sets on the local
disks on upgrade more precise.
* Remove more&less from the list of standard binaries (I need more space!)
* When building an fstab from the users' fstab, drop lines starting with
a '#' and lines with an fstype that is not supported on the miniroot.

Sync atari miniroot & mi-miniroot

branches: 1.5.2;
Add a `install_disk' option (copied from Atari miniroot).
Make editor configurable (variable EDITOR, also usable by disklabel(8)).
Move disklabel(8) calls into `md_prep_label()'.
Eliminate two uses of `sed'.
Eliminate `awk' in upgrade.sh.

kill some more awks

There's life after awk. Replace awk scripts with shell function equivalents
(inspired by Leo's atari scripts).

Copyright assigned to The NetBSD Foundation.

MI install and upgrade scripts.

eXorcize and `` -> $()

Remove uses of test ... -a ... and test ... -o ...

branches: 1.25.46;
remove references to disktab.{preinstall,shadow}

Convert TNF licenses to new 2 clause variant

branches: 1.23.20; 1.23.22;
Instead of abusing the function md_prep_label(), create a new (optional)
md_view_labels() and a variable to mark its availability, so checking of
the available disklabels can be done before the root device is chosen.
Suggested by Martin Bertelsmann.

branches: 1.22.12; 1.22.16;
Make FQDN optional (PR#9823).

make sure . install.sub etc work regardless of PATH

branches: 1.20.2;
Actually use MDSETS, so that ports can install the x sets if useful

branches: 1.19.2;
Make it clearer what to answer to the "Device name: " prompt.

* Fix a typo.

* Present option to configure a swap device (a bit rude.. we only offer
partition `b', like we only consider `a' for root)

branches: 1.17.2;
Fix tipo inherited from old version of TNF copyright template.

Don't leave /etc/rc.conf "unconfigured".

* ftp setup: don't echo password
* network interface configuration:
- use new ifconfig(8) capabilities
- adapt to changed ifconfig(8) output
- use new config files (ifconfig.xxn)

Merge the netbsd-1-2 branch back into the mainline.

Pull md_install_sets() changes down from release branch.

sync with 1.2 branch

do md_install_sets.

Deal with install sets in `install_from_mounted_fs()' differently.
The sets are passed around in a global variable.
Remember installed sets across loads from different media.

Move all disklabel handling into install.md. Even the error messages
can be machine-dependent.

Insert filesystem type in munge_fstab.
Don't `ifconfig down' an active network interface (bad for diskless setup);
but use it to cull default IP address and netmask.

* Edit VERSION into install.sub while copying instead of using a
VERSION file.
* Set the EDITOR variable in install.sub, so it will be set in both
upgrade & install.
* Make the checks on the presence of installation sets on the local
disks on upgrade more precise.
* Remove more&less from the list of standard binaries (I need more space!)
* When building an fstab from the users' fstab, drop lines starting with
a '#' and lines with an fstype that is not supported on the miniroot.

Sync atari miniroot & mi-miniroot

branches: 1.5.2;
Add a `install_disk' option (copied from Atari miniroot).
Make editor configurable (variable EDITOR, also usable by disklabel(8)).
Move disklabel(8) calls into `md_prep_label()'.
Eliminate two uses of `sed'.
Eliminate `awk' in upgrade.sh.

kill some more awks

There's life after awk. Replace awk scripts with shell function equivalents
(inspired by Leo's atari scripts).

Copyright assigned to The NetBSD Foundation.

MI install and upgrade scripts.

remove references to disktab.{preinstall,shadow}

Convert TNF licenses to new 2 clause variant

branches: 1.23.20; 1.23.22;
Instead of abusing the function md_prep_label(), create a new (optional)
md_view_labels() and a variable to mark its availability, so checking of
the available disklabels can be done before the root device is chosen.
Suggested by Martin Bertelsmann.

branches: 1.22.12; 1.22.16;
Make FQDN optional (PR#9823).

make sure . install.sub etc work regardless of PATH

branches: 1.20.2;
Actually use MDSETS, so that ports can install the x sets if useful

branches: 1.19.2;
Make it clearer what to answer to the "Device name: " prompt.

* Fix a typo.

* Present option to configure a swap device (a bit rude.. we only offer
partition `b', like we only consider `a' for root)

branches: 1.17.2;
Fix tipo inherited from old version of TNF copyright template.

Don't leave /etc/rc.conf "unconfigured".

* ftp setup: don't echo password
* network interface configuration:
- use new ifconfig(8) capabilities
- adapt to changed ifconfig(8) output
- use new config files (ifconfig.xxn)

Merge the netbsd-1-2 branch back into the mainline.

Pull md_install_sets() changes down from release branch.

sync with 1.2 branch

do md_install_sets.

Deal with install sets in `install_from_mounted_fs()' differently.
The sets are passed around in a global variable.
Remember installed sets across loads from different media.

Move all disklabel handling into install.md. Even the error messages
can be machine-dependent.

Insert filesystem type in munge_fstab.
Don't `ifconfig down' an active network interface (bad for diskless setup);
but use it to cull default IP address and netmask.

* Edit VERSION into install.sub while copying instead of using a
VERSION file.
* Set the EDITOR variable in install.sub, so it will be set in both
upgrade & install.
* Make the checks on the presence of installation sets on the local
disks on upgrade more precise.
* Remove more&less from the list of standard binaries (I need more space!)
* When building an fstab from the users' fstab, drop lines starting with
a '#' and lines with an fstype that is not supported on the miniroot.

Sync atari miniroot & mi-miniroot

branches: 1.5.2;
Add a `install_disk' option (copied from Atari miniroot).
Make editor configurable (variable EDITOR, also usable by disklabel(8)).
Move disklabel(8) calls into `md_prep_label()'.
Eliminate two uses of `sed'.
Eliminate `awk' in upgrade.sh.

kill some more awks

There's life after awk. Replace awk scripts with shell function equivalents
(inspired by Leo's atari scripts).

Copyright assigned to The NetBSD Foundation.

MI install and upgrade scripts.

Initialize THESETS just after dotting in install.sub

Replace do_mfs_mount with md_makerootwritable
(On some ports it is easier to remount root.)

Nuke md_install_sets() ... just set the MDSETS variable at the top of
install.md

redo rev. 1.5.2.3 which seemed to got lost.

pull up md_install_sets.

Pull down from trunk:
> Deal with install sets in `install_from_mounted_fs()' differently.

Update from trunk:

Move all disklabel handling into install.md. Even the error messages
can be machine-dependent.

Sync with trunk.

Pullup rev 1.18 from trunk.

Pullup from -current:
actually use the $MDSETS variable, so that individual ports can choose to
(e.g.) install the x sets if they want to.

Pull up to last week's -current.

Pull up following revision(s) (requested by is in ticket #1130):
distrib/miniroot/install.sh: revision 1.23
distrib/miniroot/upgrade.sh: revision 1.21
distrib/amiga/miniroot/install.md: revision 1.25
Instead of abusing the function md_prep_label(), create a new (optional)
md_view_labels() and a variable to mark its availability, so checking of
the available disklabels can be done before the root device is chosen.
Suggested by Martin Bertelsmann.

Pull up following revision(s) (requested by is in ticket #1130):
distrib/miniroot/install.sh: revision 1.23
distrib/miniroot/upgrade.sh: revision 1.21
distrib/amiga/miniroot/install.md: revision 1.25
Instead of abusing the function md_prep_label(), create a new (optional)
md_view_labels() and a variable to mark its availability, so checking of
the available disklabels can be done before the root device is chosen.
Suggested by Martin Bertelsmann.

sync with head.

Sync with HEAD.

Sync with HEAD.