PR install/50311: missing gptmbr.bin on ramdisk based installs.

Include installboot on amd64/i386 install ramdisks in prep for a change
to sysinst which will use it instead of a handrolled replacement.

Make i386/ramdisks/common/list.ramdisk identical to
amd64/ramdisks/common/list.ramdisk.

Previously, the amd64 list.ramdisk used the small version of gzip from
distrib/utils/x_gzip, while the i386 list.ramdisk used the full version
of gzip built from usr.bin/gzip, and also used extra libraries needed to
make that work. Now, they both use the small version.

The only other difference was in the order of some PROG lines.

branches: 1.23.2;
Add sbin/gpt to i386 install ramdisk.

Add support for ext2fs to i386/amd64 ramdisks.
This is usefull for setup with various xen hosting providers.
Prompted by Blair Sadewitz.

branches: 1.21.2;
Update location of "less" source directory to the build of various
install medias.

Add library lzma to make it compile with recent gzip.

Fix indent.

branches: 1.18.2;
Sync ramdisks content across i386 and amd64. Biggest change is for amd64,
where configuration for crunchgen(1) is moved from ramdisk/ to common/.

For i386, only mbrlabel(8) and various LFS related binaries are added. Yes,
LFS. It was added to amd64 ramdisk 3 years ago, I believe it's for a good
reason... ?

BOOTMODEL disappeared when CD ISOs switched from ramdisk to CD-ROM as
root file system 2 years ago.

CMD sed + MTREE is turned into COPY (as does amd64).

branches: 1.16.2;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent on common/protocols changes.

Remove unneeded gnu/usr.bin from SRCDIRS.

branches: 1.9.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Make x86 installation use tmpfs.

branches: 1.7.4;
Overhaul ifconfig. Use fewer global variables. Take a leap toward
improved modularity and extensibility.

In the new architecture, a directed graph of argument-matching
objects (match objects) expresses the set of feasible ifconfig
statements. Match objects are labelled by subroutines that provide
the statement semantics.

Many IPv4, IPv6, 802.11, tunnel, and media configurations have been
tested.

AppleTalk, ISO, carp(4), agr(4), and vlan(4) configuration need
testing.

branches: 1.6.2; 1.6.6; 1.6.8;
Move and share a common termcap.mini file.

branches: 1.5.4;
libssp is gone.

Add new Makefile knob, USE_FORT, which extends USE_SSP by turning on the
FORTIFY_SOURCE feature of libssp, thus checking the size of arguments to
various string and memory copy and set functions (as well as a few system
calls and other miscellany) where known at function entry. RedHat has
evidently built all "core system packages" with this option for some time.

This option should be used at the top of Makefiles (or Makefile.inc where
this is used for subdirectories) but after any setting of LIB.

This is only useful for userland code, and cannot be used in libc or in
any code which includes the libc internals, because it overrides certain
libc functions with macros. Some effort has been made to make USE_FORT=yes
work correctly for a full-system build by having the bsd.sys.mk logic
disable the feature where it should not be used (libc, libssp iteself,
the kernel) but no attempt has been made to build the entire system with
USE_FORT and doing so will doubtless expose numerous bugs and misfeatures.

Adjust the system build so that all programs and libraries that are setuid,
directly handle network data (including serial comm data), perform
authentication, or appear likely to have (or have a history of having)
data-driven bugs (e.g. file(1)) are built with USE_FORT=yes by default,
with the exception of libc, which cannot use USE_FORT and thus uses
only USE_SSP by default. Tested on i386 with no ill results; USE_FORT=no
per-directory or in a system build will disable if desired.

Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Move the programs that are common to all ramdisks into common/list.ramdisk.
The build ramdiskbin programs have the same code size, the overall sizes
differ slightly due to the way rodata.str.1 gets relaxed.

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Include installboot on amd64/i386 install ramdisks in prep for a change
to sysinst which will use it instead of a handrolled replacement.

Make i386/ramdisks/common/list.ramdisk identical to
amd64/ramdisks/common/list.ramdisk.

Previously, the amd64 list.ramdisk used the small version of gzip from
distrib/utils/x_gzip, while the i386 list.ramdisk used the full version
of gzip built from usr.bin/gzip, and also used extra libraries needed to
make that work. Now, they both use the small version.

The only other difference was in the order of some PROG lines.

branches: 1.23.2;
Add sbin/gpt to i386 install ramdisk.

Add support for ext2fs to i386/amd64 ramdisks.
This is usefull for setup with various xen hosting providers.
Prompted by Blair Sadewitz.

branches: 1.21.2;
Update location of "less" source directory to the build of various
install medias.

Add library lzma to make it compile with recent gzip.

Fix indent.

branches: 1.18.2;
Sync ramdisks content across i386 and amd64. Biggest change is for amd64,
where configuration for crunchgen(1) is moved from ramdisk/ to common/.

For i386, only mbrlabel(8) and various LFS related binaries are added. Yes,
LFS. It was added to amd64 ramdisk 3 years ago, I believe it's for a good
reason... ?

BOOTMODEL disappeared when CD ISOs switched from ramdisk to CD-ROM as
root file system 2 years ago.

CMD sed + MTREE is turned into COPY (as does amd64).

branches: 1.16.2;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent on common/protocols changes.

Remove unneeded gnu/usr.bin from SRCDIRS.

branches: 1.9.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Make x86 installation use tmpfs.

branches: 1.7.4;
Overhaul ifconfig. Use fewer global variables. Take a leap toward
improved modularity and extensibility.

In the new architecture, a directed graph of argument-matching
objects (match objects) expresses the set of feasible ifconfig
statements. Match objects are labelled by subroutines that provide
the statement semantics.

Many IPv4, IPv6, 802.11, tunnel, and media configurations have been
tested.

AppleTalk, ISO, carp(4), agr(4), and vlan(4) configuration need
testing.

branches: 1.6.2; 1.6.6; 1.6.8;
Move and share a common termcap.mini file.

branches: 1.5.4;
libssp is gone.

Add new Makefile knob, USE_FORT, which extends USE_SSP by turning on the
FORTIFY_SOURCE feature of libssp, thus checking the size of arguments to
various string and memory copy and set functions (as well as a few system
calls and other miscellany) where known at function entry. RedHat has
evidently built all "core system packages" with this option for some time.

This option should be used at the top of Makefiles (or Makefile.inc where
this is used for subdirectories) but after any setting of LIB.

This is only useful for userland code, and cannot be used in libc or in
any code which includes the libc internals, because it overrides certain
libc functions with macros. Some effort has been made to make USE_FORT=yes
work correctly for a full-system build by having the bsd.sys.mk logic
disable the feature where it should not be used (libc, libssp iteself,
the kernel) but no attempt has been made to build the entire system with
USE_FORT and doing so will doubtless expose numerous bugs and misfeatures.

Adjust the system build so that all programs and libraries that are setuid,
directly handle network data (including serial comm data), perform
authentication, or appear likely to have (or have a history of having)
data-driven bugs (e.g. file(1)) are built with USE_FORT=yes by default,
with the exception of libc, which cannot use USE_FORT and thus uses
only USE_SSP by default. Tested on i386 with no ill results; USE_FORT=no
per-directory or in a system build will disable if desired.

Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Move the programs that are common to all ramdisks into common/list.ramdisk.
The build ramdiskbin programs have the same code size, the overall sizes
differ slightly due to the way rodata.str.1 gets relaxed.

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

sync with HEAD

sync with head.

Sync with HEAD.

Sync with HEAD.

Move and share a common termcap.mini file.

file list.ramdisk was added on branch mjf-devfs on 2008-02-01 13:43:13 +0000

Pull up following revision(s) (requested by joerg in ticket #18):
distrib/amd64/ramdisks/ramdisk/list: revision 1.8
distrib/i386/ramdisks/common/list.ramdisk: revision 1.8
sys/arch/i386/conf/INSTALL_FLOPPY: revision 1.2
Make x86 installation use tmpfs.

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

Sync with HEAD

Catchup with rmind-uvmplock merge.

sync with head

Rebase to HEAD as of a few days ago.

Resync to 2012-11-19 00:00:00 UTC