#
1.21 |
|
17-Feb-2024 |
christos |
Fix MKREPRO build (Jan-Benedict Glaw)
|
Revision tags: netbsd-10-0-RC4 netbsd-10-0-RC3 netbsd-10-0-RC2 netbsd-10-0-RC1 netbsd-10-base cjep_sun2x-base1 cjep_sun2x-base cjep_staticlib_x-base1 cjep_staticlib_x-base
|
#
1.20 |
|
16-Nov-2020 |
rin |
Correctly support aarch64eb and earmv7hfeb in a similar manner to their little-endian counterparts.
Fix build failures for periodic binary snapshots.
|
Revision tags: netbsd-9-3-RELEASE netbsd-9-2-RELEASE netbsd-9-1-RELEASE phil-wifi-20200421 phil-wifi-20200411 is-mlppp-base phil-wifi-20200406 netbsd-9-0-RELEASE netbsd-9-0-RC2 netbsd-9-0-RC1 phil-wifi-20191119 netbsd-9-base phil-wifi-20190609 pgoyette-compat-20190127 pgoyette-compat-20190118 pgoyette-compat-1226 pgoyette-compat-1126 pgoyette-compat-1020 pgoyette-compat-0930 pgoyette-compat-0906 pgoyette-compat-0728 phil-wifi-base pgoyette-compat-0625 pgoyette-compat-0521 pgoyette-compat-0502 pgoyette-compat-0422 pgoyette-compat-0415 pgoyette-compat-0407
|
#
1.19 |
|
01-Apr-2018 |
ryo |
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@) - add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
|
Revision tags: pgoyette-compat-0330 pgoyette-compat-0322 pgoyette-compat-0315 pgoyette-compat-base
|
#
1.18 |
|
20-Aug-2017 |
christos |
branches: 1.18.2; Create the ramdisk destination dir here.
|
Revision tags: perseant-stdc-iso10646-base
|
#
1.17 |
|
05-Jul-2017 |
jmcneill |
Copy install ramdisk to releasedir. Provide both a raw ffs and Legacy U-Boot version of it.
|
Revision tags: netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320
|
#
1.16 |
|
27-Jan-2017 |
rin |
branches: 1.16.4; Fix build with LLVM, which does not support -mthumb-interwork.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
branches: 1.14.2; 1.14.4; When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-2-RELEASE netbsd-7-1-2-RELEASE netbsd-7-1-1-RELEASE netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.20 |
|
16-Nov-2020 |
rin |
Correctly support aarch64eb and earmv7hfeb in a similar manner to their little-endian counterparts.
Fix build failures for periodic binary snapshots.
|
Revision tags: netbsd-9-1-RELEASE phil-wifi-20200421 phil-wifi-20200411 is-mlppp-base phil-wifi-20200406 netbsd-9-0-RELEASE netbsd-9-0-RC2 netbsd-9-0-RC1 phil-wifi-20191119 netbsd-9-base phil-wifi-20190609 pgoyette-compat-20190127 pgoyette-compat-20190118 pgoyette-compat-1226 pgoyette-compat-1126 pgoyette-compat-1020 pgoyette-compat-0930 pgoyette-compat-0906 pgoyette-compat-0728 phil-wifi-base pgoyette-compat-0625 pgoyette-compat-0521 pgoyette-compat-0502 pgoyette-compat-0422 pgoyette-compat-0415 pgoyette-compat-0407
|
#
1.19 |
|
01-Apr-2018 |
ryo |
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@) - add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
|
Revision tags: pgoyette-compat-0330 pgoyette-compat-0322 pgoyette-compat-0315 pgoyette-compat-base
|
#
1.18 |
|
20-Aug-2017 |
christos |
branches: 1.18.2; Create the ramdisk destination dir here.
|
Revision tags: perseant-stdc-iso10646-base
|
#
1.17 |
|
05-Jul-2017 |
jmcneill |
Copy install ramdisk to releasedir. Provide both a raw ffs and Legacy U-Boot version of it.
|
Revision tags: netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320
|
#
1.16 |
|
27-Jan-2017 |
rin |
branches: 1.16.4; Fix build with LLVM, which does not support -mthumb-interwork.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
branches: 1.14.2; 1.14.4; When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-2-RELEASE netbsd-7-1-2-RELEASE netbsd-7-1-1-RELEASE netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
Revision tags: pgoyette-compat-20190127 pgoyette-compat-20190118 pgoyette-compat-1226 pgoyette-compat-1126 pgoyette-compat-1020 pgoyette-compat-0930 pgoyette-compat-0906 pgoyette-compat-0728 phil-wifi-base pgoyette-compat-0625 pgoyette-compat-0521 pgoyette-compat-0502 pgoyette-compat-0422 pgoyette-compat-0415 pgoyette-compat-0407
|
#
1.19 |
|
01-Apr-2018 |
ryo |
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@) - add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
|
Revision tags: pgoyette-compat-0330 pgoyette-compat-0322 pgoyette-compat-0315 pgoyette-compat-base
|
#
1.18 |
|
20-Aug-2017 |
christos |
branches: 1.18.2; Create the ramdisk destination dir here.
|
Revision tags: perseant-stdc-iso10646-base
|
#
1.17 |
|
05-Jul-2017 |
jmcneill |
Copy install ramdisk to releasedir. Provide both a raw ffs and Legacy U-Boot version of it.
|
Revision tags: netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320
|
#
1.16 |
|
27-Jan-2017 |
rin |
branches: 1.16.4; Fix build with LLVM, which does not support -mthumb-interwork.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
branches: 1.14.2; 1.14.4; When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-2-RELEASE netbsd-7-1-2-RELEASE netbsd-7-1-1-RELEASE netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.18 |
|
20-Aug-2017 |
christos |
Create the ramdisk destination dir here.
|
Revision tags: perseant-stdc-iso10646-base
|
#
1.17 |
|
05-Jul-2017 |
jmcneill |
Copy install ramdisk to releasedir. Provide both a raw ffs and Legacy U-Boot version of it.
|
Revision tags: netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320
|
#
1.16 |
|
27-Jan-2017 |
rin |
branches: 1.16.4; Fix build with LLVM, which does not support -mthumb-interwork.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
branches: 1.14.2; 1.14.4; When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.17 |
|
05-Jul-2017 |
jmcneill |
Copy install ramdisk to releasedir. Provide both a raw ffs and Legacy U-Boot version of it.
|
Revision tags: netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320
|
#
1.16 |
|
27-Jan-2017 |
rin |
Fix build with LLVM, which does not support -mthumb-interwork.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
branches: 1.14.2; 1.14.4; When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.16 |
|
27-Jan-2017 |
rin |
Fix build with LLVM, which does not support -mthumb-interwork.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.15 |
|
24-Jan-2017 |
christos |
+= for MAKEFS_FLAGS
|
Revision tags: bouyer-socketcan-base pgoyette-localcount-20170107 pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
13-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
Revision tags: pgoyette-localcount-20161104 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base
|
#
1.14 |
|
07-Jul-2016 |
matt |
When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork to save space. Think of it as -Os on steriods.
|
Revision tags: netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 tls-maxphys-base
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
Revision tags: netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
Revision tags: matt-premerge-20091211
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base mjf-devfs2-base keiichi-mipv6-base mjf-devfs-base matt-armv6-nbase matt-armv6-prevmlocking cube-autoconf-base matt-armv6-base matt-mips64-base hpcarm-cleanup-base
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
Revision tags: netbsd-4-0-1-RELEASE wrstuden-fixsa-newbase wrstuden-fixsa-base-1 netbsd-4-0-RELEASE netbsd-4-0-RC5 netbsd-4-0-RC4 netbsd-4-0-RC3 netbsd-4-0-RC2 netbsd-4-0-RC1 netbsd-3-1-1-RELEASE netbsd-3-0-3-RELEASE wrstuden-fixsa-base abandoned-netbsd-4-base netbsd-3-1-RELEASE netbsd-3-0-2-RELEASE netbsd-3-1-RC4 netbsd-3-1-RC3 netbsd-3-1-RC2 netbsd-3-1-RC1 netbsd-4-base netbsd-3-0-1-RELEASE netbsd-3-0-RELEASE netbsd-3-0-RC6 netbsd-3-0-RC5 netbsd-3-0-RC4 netbsd-3-0-RC3 netbsd-3-0-RC2 netbsd-3-0-RC1 netbsd-2-0-3-RELEASE netbsd-2-1-RELEASE netbsd-2-1-RC6 netbsd-2-1-RC5 netbsd-2-1-RC4 netbsd-2-1-RC3 netbsd-2-1-RC2 netbsd-2-1-RC1 netbsd-2-0-2-RELEASE netbsd-3-base netbsd-2-0-1-RELEASE netbsd-2-base netbsd-2-0-RELEASE netbsd-2-0-RC5 netbsd-2-0-RC4 netbsd-2-0-RC3 netbsd-2-0-RC2 netbsd-2-0-RC1 netbsd-2-0-base netbsd-1-6-PATCH002-RELEASE netbsd-1-6-PATCH002 netbsd-1-6-PATCH002-RC4 netbsd-1-6-PATCH002-RC3 netbsd-1-6-PATCH002-RC2 netbsd-1-6-PATCH002-RC1 netbsd-1-6-PATCH001 netbsd-1-6-PATCH001-RELEASE netbsd-1-6-PATCH001-RC3 netbsd-1-6-PATCH001-RC2 netbsd-1-6-PATCH001-RC1 fvdl_fs64_base netbsd-1-6-RELEASE netbsd-1-6-RC3 netbsd-1-6-RC2 netbsd-1-6-RC1 netbsd-1-6-base
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
12-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.13 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
#
1.12 |
|
11-Feb-2010 |
roy |
branches: 1.12.6; 1.12.12; Remove terminfo.db as it's now embedded in libterminfo.
|
#
1.11 |
|
05-Feb-2010 |
roy |
Use the rescue terminfo.db in our images instead of termcap.
|
#
1.10 |
|
20-Sep-2009 |
abs |
34 different termcap subsets, plus a couple of ports still using the full termcap distfile. In an attempt to reduce the madness switch everyone (except the i386 cd install which does its own thing) to the same (under 8K) termcap subset:
ansi ansi/pc-term compatible with color dumb|unknown 80-column dumb tty hp300h HP Catseye console iris-ansi-ap IRIS ANSI in application-keypad mode iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100) sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line vt100|vt100-am DEC VT100 (w/advanced video) vt220-8 DEC VT220 8 bit terminal vt220|vt200|vt300 DEC VT220 in vt100 emulation mode wsvt25 NetBSD wscons in 25 line DEC VT220 mode wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta x68k|x68k-ite NetBSD/x68k ITE xterm|vs100 xterm terminal emulator (X Window System)
Trying to provide similar functionality across all ports? It'll never catch on...
|
#
1.9 |
|
20-Sep-2009 |
abs |
Nothing needs disktab anymore, so we'd rather have an inode and slightly over 1K of space on install media...
|
#
1.8 |
|
20-Sep-2009 |
abs |
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols ${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services
|
#
1.7 |
|
20-Sep-2009 |
abs |
Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)
|
#
1.6 |
|
07-Apr-2009 |
joerg |
Change ramdisks from dhclient to dhcpcd and add corresponding glue to sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed, 60KB compressed.
|
#
1.5 |
|
25-Jan-2009 |
abs |
branches: 1.5.2; Use the cutdown distrib/common/services and distrib/common/protocols rather than the full fat etc versions
|
#
1.4 |
|
10-May-2007 |
dogcow |
branches: 1.4.12; 1.4.24; Since /etc/services has gotten rather large, use a minimal one for install kernels. (mount_nfs is notably the only binary that doesn't gracefully deal with the lack of an /etc/services file, it appears.)
|
#
1.3 |
|
02-May-2002 |
lukem |
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE}
|
#
1.2 |
|
26-Apr-2002 |
lukem |
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version
|
#
1.1 |
|
12-Apr-2002 |
thorpej |
Ramdisk/install kernel for evbarm. Currently support the Npwr storage appliance.
XXX More work needs to be done here.
|
#
1.4.24.1 |
|
09-Jan-2014 |
matt |
Build BE ramdisks for BE MACHINE_ARCH's
|
#
1.4.12.1 |
|
05-Oct-2008 |
mjf |
Sync with HEAD.
|
#
1.5.2.1 |
|
13-May-2009 |
jym |
Sync with HEAD.
Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html
|
#
1.12.12.1 |
|
19-Aug-2014 |
tls |
Rebase to HEAD as of a few days ago.
|
#
1.12.6.1 |
|
22-May-2014 |
yamt |
sync with head.
for a reference, the tree before this commit was tagged as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid a limitation of cvs. ("Protocol error: too many arguments")
|