remove redundant kernels and floppies from the space-starved i386 ISO

Restore MKNOUVEAUFIRMWARE and MKRADEONFIRMWARE and make gpufw set unconditional

Simplifies logic.
Restoring MK* requested by mrg on tech-kern discussion
https://mail-index.netbsd.org/tech-kern/2021/09/25/msg027695.html

Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

Shrink the evbarm install image by not including the live images on the install media

Default USE_MBR to no

Merge amd64's UEFI logic back into the generic bootimage handling.

branches: 1.5.12; 1.5.14;
Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.4.14; 1.4.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Restore MKNOUVEAUFIRMWARE and MKRADEONFIRMWARE and make gpufw set unconditional

Simplifies logic.
Restoring MK* requested by mrg on tech-kern discussion
https://mail-index.netbsd.org/tech-kern/2021/09/25/msg027695.html

Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

Shrink the evbarm install image by not including the live images on the install media

Default USE_MBR to no

Merge amd64's UEFI logic back into the generic bootimage handling.

branches: 1.5.12; 1.5.14;
Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.4.14; 1.4.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

Shrink the evbarm install image by not including the live images on the install media

Default USE_MBR to no

Merge amd64's UEFI logic back into the generic bootimage handling.

branches: 1.5.12; 1.5.14;
Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.4.14; 1.4.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Shrink the evbarm install image by not including the live images on the install media

Default USE_MBR to no

Merge amd64's UEFI logic back into the generic bootimage handling.

branches: 1.5.12; 1.5.14;
Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.4.14; 1.4.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Merge amd64's UEFI logic back into the generic bootimage handling.

Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.4.14; 1.4.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

sync with (a bit old) head

sync with head.

sync with head

file Makefile.installimage was added on branch yamt-pagecache on 2012-04-17 00:02:32 +0000

Resync to 2012-11-19 00:00:00 UTC