use arm_elf2aout

branches: 1.21.42;
Use common ${OBJCOPY_ELF2AOUT_FLAGS}.

Sync with src/sys/arch/shark/conf/Makefile.shark.inc rev 1.14:
> also need to strip out GCC 4.5's new .debug_pubtypes section.
> while here, minor cleanup.

XXX: probably we should have something like ${ARM_AOUT_REMOVE_SECTIONS}
XXX: in bsd.own.mk

Use consistent names for distribution RAMDISK kernels:
netbsd.able-INSTALL.gz -> netbsd-INSTALL.ABLE.gz
netbsd.aout-INSTALL.gz -> netbsd-INSTALL.aout.gz

XXX: Probably it's simpler to have default ELF (currently ABLE) kernels
XXX: and optional a.out ones for old firmware as sgimips does for ecoff ones.

Remove .ARM.attributes when converting from ELF to a.out.

Mirror the changes to sys/arch/cats/conf/Makefile.cats.inc: remove
some more ELF sections when copying to a.out format: .debug_frame,
.debug_loc, .debug_pubnames, and .debug_aranges.

branches: 1.16.2; 1.16.6; 1.16.8; 1.16.10;
Fix another place where the newly added partial debugging symbols
need to be omitted in ELF -> a.out conversion.

Remove the .note.netbsd.ident section when converting the kernel to a.out.

branches: 1.14.4; 1.14.6; 1.14.10;
As requested in PR port-cats/30460 add support for GENERIC.ABLE kernel to
sysinst, and also add the ABLE install kernel to the generated release
kernels.

use simpler MDSET_NOSTRIP= instead of MDSET_NOSTRIP.xxxx=

Need to remove .comment too.

Don't strip the kernel before the objcopy as the result won't load with
the CATS firmware. I think this is due to a bug in bfd. We'll see.

Use objcopy to a.out'ify the install kernel image.

branches: 1.9.2;
- whitespace consistency cleanup
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target

rather than blocking parallel mdset builds with .WAIT, replace usage of
"netbsd.tmp" with "${.TARGET:R}" (et al)

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- Rename Makefile.mdset variables:
MDEXTRA_SUFFIXES.${KERNEL} -> MDSET.${FILENAME}.suffixes
${KERNEL.${_K}}.post -> MDSET.${FILENAME}.post
This allows "default" rules for for MDSETTARGETS with FILENAMEs of "-"
by defined MDSET.-.post & MDSET.-.suffixes
- Document the above
- Use the above appropriately in various Makefiles
- Be a be quieter when building these kernels
- Add .WAIT syncs so that multiple kernels aren't built in parallel, because
the temporary filename is the same, and it also avoid hairy magic in
syncing the targets generated from MDSET.${FILENAME}.suffixes with
the master target for that ${FILENAME}

Makefile.mdset:
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename

The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.

- don't pull in <bsd.prog.mk> in Makefile.mdset; do that in the caller instead
- renamed optional post-strip action variable from ${KERNEL}.post to
netbsd.${KERNEL}.post

convert to distrib/common/Makefile.mdset

The results of my cats NWDO hacking.

This was tested using a custom INSTALL kernel. The current one is >4Mb
which the cats firmware can't currently boot. We need to decide what
needs to be removed from INSTALL.

Use common ${OBJCOPY_ELF2AOUT_FLAGS}.

Sync with src/sys/arch/shark/conf/Makefile.shark.inc rev 1.14:
> also need to strip out GCC 4.5's new .debug_pubtypes section.
> while here, minor cleanup.

XXX: probably we should have something like ${ARM_AOUT_REMOVE_SECTIONS}
XXX: in bsd.own.mk

Use consistent names for distribution RAMDISK kernels:
netbsd.able-INSTALL.gz -> netbsd-INSTALL.ABLE.gz
netbsd.aout-INSTALL.gz -> netbsd-INSTALL.aout.gz

XXX: Probably it's simpler to have default ELF (currently ABLE) kernels
XXX: and optional a.out ones for old firmware as sgimips does for ecoff ones.

Remove .ARM.attributes when converting from ELF to a.out.

Mirror the changes to sys/arch/cats/conf/Makefile.cats.inc: remove
some more ELF sections when copying to a.out format: .debug_frame,
.debug_loc, .debug_pubnames, and .debug_aranges.

branches: 1.16.2; 1.16.6; 1.16.8; 1.16.10;
Fix another place where the newly added partial debugging symbols
need to be omitted in ELF -> a.out conversion.

Remove the .note.netbsd.ident section when converting the kernel to a.out.

branches: 1.14.4; 1.14.6; 1.14.10;
As requested in PR port-cats/30460 add support for GENERIC.ABLE kernel to
sysinst, and also add the ABLE install kernel to the generated release
kernels.

use simpler MDSET_NOSTRIP= instead of MDSET_NOSTRIP.xxxx=

Need to remove .comment too.

Don't strip the kernel before the objcopy as the result won't load with
the CATS firmware. I think this is due to a bug in bfd. We'll see.

Use objcopy to a.out'ify the install kernel image.

branches: 1.9.2;
- whitespace consistency cleanup
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target

rather than blocking parallel mdset builds with .WAIT, replace usage of
"netbsd.tmp" with "${.TARGET:R}" (et al)

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- Rename Makefile.mdset variables:
MDEXTRA_SUFFIXES.${KERNEL} -> MDSET.${FILENAME}.suffixes
${KERNEL.${_K}}.post -> MDSET.${FILENAME}.post
This allows "default" rules for for MDSETTARGETS with FILENAMEs of "-"
by defined MDSET.-.post & MDSET.-.suffixes
- Document the above
- Use the above appropriately in various Makefiles
- Be a be quieter when building these kernels
- Add .WAIT syncs so that multiple kernels aren't built in parallel, because
the temporary filename is the same, and it also avoid hairy magic in
syncing the targets generated from MDSET.${FILENAME}.suffixes with
the master target for that ${FILENAME}

Makefile.mdset:
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename

The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.

- don't pull in <bsd.prog.mk> in Makefile.mdset; do that in the caller instead
- renamed optional post-strip action variable from ${KERNEL}.post to
netbsd.${KERNEL}.post

convert to distrib/common/Makefile.mdset

The results of my cats NWDO hacking.

This was tested using a custom INSTALL kernel. The current one is >4Mb
which the cats firmware can't currently boot. We need to decide what
needs to be removed from INSTALL.

Apply patch (requested by jmc in ticket #1404):
Fix 2 remaining places items are depending on execute permissions coming out
from a cvs checkout on scripts.

sync with HEAD

sync with HEAD

Pull across:

revision 1.15
date: 2007/11/19 10:28:15; author: skrll; state: Exp; lines: +3 -2
Remove the .note.netbsd.ident section when converting the kernel to a.out.

Sync with the following revisions (requested by skrll in ticket #1196):
gnu/dist/gdb removed
gnu/usr.bin/gdb53 removed
distrib/cats/instkernel/Makefile 1.14.6.1
gnu/dist/gdb6/bfd/config.bfd 1.3.6.1
gnu/dist/gdb6/bfd/elfxx-sparc.c 1.1.1.2.6.1
gnu/dist/gdb6/bfd/elfxx-sparc.h 1.1.1.2.6.1
gnu/dist/gdb6/gdb/Makefile.in 1.2.2.1.2.2
gnu/dist/gdb6/gdb/alpha-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/alpha-tdep.h 1.1.1.2.6.1
gnu/dist/gdb6/gdb/alphabsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/alphabsd-nat.h 1.1.2.1
gnu/dist/gdb6/gdb/alphabsd-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/alphabsd-tdep.h 1.1.1.2.6.1
gnu/dist/gdb6/gdb/alphanbsd-nat.c 1.1.2.1
gnu/dist/gdb6/gdb/alphanbsd-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/amd64-nat.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/amd64bsd-nat.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/amd64nbsd-nat.c 1.1.1.2.6.3
gnu/dist/gdb6/gdb/amd64nbsd-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/arm-tdep.h 1.1.1.2.6.1
gnu/dist/gdb6/gdb/armbsd-tdep.c 1.1.2.1
gnu/dist/gdb6/gdb/armnbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/armnbsd-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/configure 1.1.1.2.6.1
gnu/dist/gdb6/gdb/configure.ac 1.1.1.2.6.1
gnu/dist/gdb6/gdb/i386bsd-nat.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/i386nbsd-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/m68kbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/mipsnbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/nbsd-thread.c 1.1.2.3
gnu/dist/gdb6/gdb/ppcnbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/ppcnbsd-tdep.c 1.3.6.1
gnu/dist/gdb6/gdb/sh-tdep.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/shnbsd-nat.c 1.1.1.2.6.3
gnu/dist/gdb6/gdb/shnbsd-tdep.c 1.1.1.2.6.4
gnu/dist/gdb6/gdb/shnbsd-tdep.h 1.1.1.2.6.1
gnu/dist/gdb6/gdb/sparc-nat.c 1.1.1.2.6.1
gnu/dist/gdb6/gdb/sparc64nbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/sparcnbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/tramp-frame.h 1.1.1.2.6.1
gnu/dist/gdb6/gdb/vaxbsd-nat.c 1.1.1.2.6.2
gnu/dist/gdb6/gdb/config/alpha/nbsd.mh 1.1.1.2.6.1
gnu/dist/gdb6/gdb/config/arm/nbsd.mt 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/arm/nbsdelf.mh 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/i386/nbsd64.mh 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/m68k/nbsdelf.mh 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/mips/nbsd.mh 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/powerpc/nbsd.mh 1.1.1.2.6.1
gnu/dist/gdb6/gdb/config/sh/nbsd.mh 1.1.1.1.6.2
gnu/dist/gdb6/gdb/config/sh/tm-nbsd.h 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/sparc/nbsd64.mh 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/sparc/nbsdelf.mh 1.1.1.1.6.1
gnu/dist/gdb6/gdb/config/vax/nbsdelf.mh 1.1.1.1.6.1
gnu/dist/gdb6/opcodes/configure 1.1.1.2.6.1
gnu/dist/gdb6/opcodes/configure.in 1.1.1.2.6.1
gnu/usr.bin/Makefile 1.126.4.1
gnu/usr.bin/gdb6/arch/alpha/config.h 1.3.4.1
gnu/usr.bin/gdb6/arch/alpha/defs.mk 1.2.6.1
gnu/usr.bin/gdb6/arch/alpha/init.c 1.2.6.1
gnu/usr.bin/gdb6/arch/alpha/nm.h 1.2.6.1
gnu/usr.bin/gdb6/arch/arm/defs.mk 1.2.6.2
gnu/usr.bin/gdb6/arch/arm/init.c 1.1.6.1
gnu/usr.bin/gdb6/arch/armeb/config.h 1.1.6.2
gnu/usr.bin/gdb6/arch/armeb/defs.mk 1.1.6.3
gnu/usr.bin/gdb6/arch/armeb/init.c 1.1.6.2
gnu/usr.bin/gdb6/arch/armeb/tm.h 1.1.6.2
gnu/usr.bin/gdb6/arch/armeb/version.c 1.1.6.2
gnu/usr.bin/gdb6/arch/i386/defs.mk 1.4.4.1
gnu/usr.bin/gdb6/arch/i386/init.c 1.3.6.1
gnu/usr.bin/gdb6/arch/m68000/config.h 1.1.6.2
gnu/usr.bin/gdb6/arch/m68000/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/arch/m68000/init.c 1.1.6.2
gnu/usr.bin/gdb6/arch/m68000/tm.h 1.1.6.2
gnu/usr.bin/gdb6/arch/m68000/version.c 1.1.6.2
gnu/usr.bin/gdb6/arch/m68k/defs.mk 1.1.4.1
gnu/usr.bin/gdb6/arch/m68k/init.c 1.1.4.1
gnu/usr.bin/gdb6/arch/mipseb/config.h 1.3.4.1
gnu/usr.bin/gdb6/arch/mipseb/defs.mk 1.2.6.2
gnu/usr.bin/gdb6/arch/mipseb/init.c 1.2.6.2
gnu/usr.bin/gdb6/arch/mipsel/config.h 1.2.6.3
gnu/usr.bin/gdb6/arch/mipsel/defs.mk 1.2.6.3
gnu/usr.bin/gdb6/arch/mipsel/init.c 1.2.6.3
gnu/usr.bin/gdb6/arch/mipsel/tm.h 1.2.6.2
gnu/usr.bin/gdb6/arch/mipsel/version.c 1.2.6.2
gnu/usr.bin/gdb6/arch/powerpc/defs.mk 1.3.6.1
gnu/usr.bin/gdb6/arch/powerpc/init.c 1.3.6.1
gnu/usr.bin/gdb6/arch/sh3eb/config.h 1.2.2.2
gnu/usr.bin/gdb6/arch/sh3eb/defs.mk 1.2.8.3
gnu/usr.bin/gdb6/arch/sh3eb/init.c 1.1.8.3
gnu/usr.bin/gdb6/arch/sh3eb/nm.h 1.1.8.2
gnu/usr.bin/gdb6/arch/sh3eb/tm.h 1.1.8.2
gnu/usr.bin/gdb6/arch/sh3eb/version.c 1.1.8.2
gnu/usr.bin/gdb6/arch/sh3el/config.h 1.2.2.2
gnu/usr.bin/gdb6/arch/sh3el/defs.mk 1.2.8.3
gnu/usr.bin/gdb6/arch/sh3el/init.c 1.1.8.3
gnu/usr.bin/gdb6/arch/sh3el/nm.h 1.1.8.2
gnu/usr.bin/gdb6/arch/sh3el/tm.h 1.1.8.2
gnu/usr.bin/gdb6/arch/sh3el/version.c 1.1.8.2
gnu/usr.bin/gdb6/arch/sparc/defs.mk 1.2.6.1
gnu/usr.bin/gdb6/arch/sparc/init.c 1.1.6.1
gnu/usr.bin/gdb6/arch/sparc64/defs.mk 1.2.6.1
gnu/usr.bin/gdb6/arch/sparc64/init.c 1.1.6.1
gnu/usr.bin/gdb6/arch/vax/config.h 1.1.6.2
gnu/usr.bin/gdb6/arch/vax/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/arch/vax/init.c 1.1.6.2
gnu/usr.bin/gdb6/arch/vax/tm.h 1.1.6.2
gnu/usr.bin/gdb6/arch/vax/version.c 1.1.6.2
gnu/usr.bin/gdb6/arch/x86_64/defs.mk 1.2.6.1
gnu/usr.bin/gdb6/arch/x86_64/init.c 1.1.6.1
gnu/usr.bin/gdb6/bfd/arch/armeb/bfd.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/armeb/bfdver.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/armeb/config.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/armeb/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/m68000/bfd.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/m68000/bfdver.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/m68000/config.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/m68000/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/mipsel/bfd.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/mipsel/bfdver.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/mipsel/config.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/mipsel/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/sh3eb/bfd.h 1.1.8.3
gnu/usr.bin/gdb6/bfd/arch/sh3eb/bfdver.h 1.1.8.2
gnu/usr.bin/gdb6/bfd/arch/sh3eb/config.h 1.1.8.2
gnu/usr.bin/gdb6/bfd/arch/sh3eb/defs.mk 1.1.8.3
gnu/usr.bin/gdb6/bfd/arch/sh3el/bfd.h 1.1.8.3
gnu/usr.bin/gdb6/bfd/arch/sh3el/bfdver.h 1.1.8.2
gnu/usr.bin/gdb6/bfd/arch/sh3el/config.h 1.1.8.2
gnu/usr.bin/gdb6/bfd/arch/sh3el/defs.mk 1.1.8.3
gnu/usr.bin/gdb6/bfd/arch/vax/bfd.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/vax/bfdver.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/vax/config.h 1.1.6.2
gnu/usr.bin/gdb6/bfd/arch/vax/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/gdb/Makefile 1.5.2.1.2.2
gnu/usr.bin/gdb6/gdbtui/Makefile 1.2.6.1
gnu/usr.bin/gdb6/libiberty/arch/armeb/config.h 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/armeb/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/m68000/config.h 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/m68000/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/mipsel/config.h 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/mipsel/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/sh3eb/config.h 1.1.8.2
gnu/usr.bin/gdb6/libiberty/arch/sh3eb/defs.mk 1.1.8.2
gnu/usr.bin/gdb6/libiberty/arch/sh3el/config.h 1.1.8.2
gnu/usr.bin/gdb6/libiberty/arch/sh3el/defs.mk 1.1.8.2
gnu/usr.bin/gdb6/libiberty/arch/vax/config.h 1.1.6.2
gnu/usr.bin/gdb6/libiberty/arch/vax/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/armeb/config.h 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/armeb/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/m68000/config.h 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/m68000/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/mipsel/config.h 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/mipsel/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/sh3eb/config.h 1.1.8.2
gnu/usr.bin/gdb6/opcodes/arch/sh3eb/defs.mk 1.1.8.3
gnu/usr.bin/gdb6/opcodes/arch/sh3el/config.h 1.1.8.2
gnu/usr.bin/gdb6/opcodes/arch/sh3el/defs.mk 1.1.8.3
gnu/usr.bin/gdb6/opcodes/arch/vax/config.h 1.1.6.2
gnu/usr.bin/gdb6/opcodes/arch/vax/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/armeb/config.h 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/armeb/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/m68000/config.h 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/m68000/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/mipsel/config.h 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/mipsel/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/sh3eb/config.h 1.1.8.2
gnu/usr.bin/gdb6/readline/arch/sh3eb/defs.mk 1.1.8.2
gnu/usr.bin/gdb6/readline/arch/sh3el/config.h 1.1.8.2
gnu/usr.bin/gdb6/readline/arch/sh3el/defs.mk 1.1.8.2
gnu/usr.bin/gdb6/readline/arch/vax/config.h 1.1.6.2
gnu/usr.bin/gdb6/readline/arch/vax/defs.mk 1.1.6.2
gnu/usr.bin/gdb6/sim/arch/mipseb/cconfig.h 1.1.2.1
gnu/usr.bin/gdb6/sim/arch/mipseb/config.h 1.1.2.1
gnu/usr.bin/gdb6/sim/arch/mipseb/defs.mk 1.1.2.1
gnu/usr.bin/gdb6/sim/arch/mipsel/cconfig.h 1.1.2.1
gnu/usr.bin/gdb6/sim/arch/mipsel/config.h 1.1.2.1
gnu/usr.bin/gdb6/sim/arch/mipsel/defs.mk 1.1.2.1
lib/libkvm/kvm_sparc64.c 1.10.18.2
lib/libpthread/pthread.c 1.48.6.4
lib/libpthread/pthread_barrier.c 1.6.18.1
lib/libpthread/pthread_cond.c 1.18.12.2
lib/libpthread/pthread_debug.h 1.8.18.1
lib/libpthread/pthread_int.h 1.34.4.5
lib/libpthread/pthread_lock.c 1.14.6.1
lib/libpthread/pthread_mutex.c 1.22.4.2
lib/libpthread/pthread_run.c 1.18.12.4
lib/libpthread/pthread_rwlock.c 1.13.6.2
lib/libpthread/pthread_sa.c 1.37.6.5
lib/libpthread/pthread_sig.c 1.47.4.8
lib/libpthread/pthread_sleep.c 1.7.6.2
lib/libpthread/sem.c 1.9.6.2
lib/libpthread/arch/sh3/pthread_md.h 1.3.6.1
regress/lib/libpthread/resolv/Makefile 1.1.12.1
regress/lib/libpthread/sigrunning/Makefile 1.1.2.1
regress/lib/libpthread/sigrunning/sigrunning.c 1.1.2.1
share/mk/bsd.own.mk 1.489.4.3
sys/arch/amd64/amd64/locore.S 1.18.14.1
sys/arch/amd64/amd64/machdep.c 1.44.2.3.2.1
sys/arch/amd64/conf/kern.ldscript 1.1.70.1
sys/arch/cats/conf/Makefile.cats.inc 1.17.30.1
sys/arch/shark/conf/Makefile.shark.inc 1.6.30.1
sys/arch/sparc64/conf/kern.ldscript 1.7.26.2
sys/arch/sparc64/conf/kern32.ldscript 1.6.26.2
sys/arch/sparc64/include/kcore.h 1.4.92.2
sys/arch/sparc64/sparc64/locore.s 1.232.4.4
sys/arch/sparc64/sparc64/machdep.c 1.193.4.3
sys/arch/sparc64/sparc64/pmap.c 1.184.2.1.2.4
sys/conf/newvers.sh 1.42.26.2
sys/kern/kern_sa.c 1.87.4.11
sys/kern/kern_synch.c 1.173.4.2
sys/sys/savar.h 1.20.10.2
tools/gdb/Makefile 1.9.4.1
tools/gdb/mknative-gdb 1.1.6.1

pullup the wrstuden-fixsa CVS branch to netbsd-4:
toolchain/35540 - GDB 6 support for pthreads.
port-sparc64/37534 - ktrace firefox gives
kernel trap 30: data access expection
GDB changes:
- delete gdb53
- enable gdb6 on all architectures
- add support for amd64 crash dumps
- add support for sparc64 crash dumps
- add support for /proc pid to executable filename for all archs
- enable thread support for all architectures
- add a note section to kernels to all platforms
- support detection/unwinding of signals for most architectures.
- Fix PTHREAD_UCONTEXT_TO_REG / PTHREAD_REG_TO_UCONTEXT on sh3.
- Apply fix from binutils-current so that sparc gdb can be cross built
on a 64bit host.
SA/pthread changes:
Pre-allocate memory needed for event delivery. Eliminates dropped
interrupts under load.
Deliver intra-process signals to running threads
Eliminate some deadlock scenarios
Fix intra-process signal delivery when delivering to a thread waiting
for signals. Makes afs work again!

Sync w/ -current. 34 merge conflicts to follow.

sync with head.

Sync with HEAD.

Sync with HEAD.

Fix another place where the newly added partial debugging symbols
need to be omitted in ELF -> a.out conversion.

file Makefile was added on branch mjf-devfs on 2008-01-19 00:03:40 +0000