Import OpenSSL 3.0.14 (last was 3.0.12)

### Changes between 3.0.13 and 3.0.14 [4 Jun 2024]

* Fixed potential use after free after SSL_free_buffers() is called.

The SSL_free_buffers function is used to free the internal OpenSSL
buffer used when processing an incoming record from the network.
The call is only expected to succeed if the buffer is not currently
in use. However, two scenarios have been identified where the buffer
is freed even when still in use.

The first scenario occurs where a record header has been received
from the network and processed by OpenSSL, but the full record body
has not yet arrived. In this case calling SSL_free_buffers will succeed
even though a record has only been partially processed and the buffer
is still in use.

The second scenario occurs where a full record containing application
data has been received and processed by OpenSSL but the application has
only read part of this data. Again a call to SSL_free_buffers will
succeed even though the buffer is still in use.

([CVE-2024-4741])

*Matt Caswell*

* Fixed an issue where checking excessively long DSA keys or parameters may
be very slow.

Applications that use the functions EVP_PKEY_param_check() or
EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.

To resolve this issue DSA keys larger than OPENSSL_DSA_MAX_MODULUS_BITS
will now fail the check immediately with a DSA_R_MODULUS_TOO_LARGE error
reason.

([CVE-2024-4603])

*Tom���� Mr��z*

* Fixed an issue where some non-default TLS server configurations can cause
unbounded memory growth when processing TLSv1.3 sessions. An attacker may
exploit certain server configurations to trigger unbounded memory growth that
would lead to a Denial of Service

This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option
is being used (but not if early_data is also configured and the default
anti-replay protection is in use). In this case, under certain conditions,
the session cache can get into an incorrect state and it will fail to flush
properly as it fills. The session cache will continue to grow in an unbounded
manner. A malicious client could deliberately create the scenario for this
failure to force a Denial of Service. It may also happen by accident in
normal operation.

([CVE-2024-2511])

*Matt Caswell*

* New atexit configuration switch, which controls whether the OPENSSL_cleanup
is registered when libcrypto is unloaded. This can be used on platforms
where using atexit() from shared libraries causes crashes on exit.

*Randall S. Becker*

### Changes between 3.0.12 and 3.0.13 [30 Jan 2024]

* A file in PKCS12 format can contain certificates and keys and may come from
an untrusted source. The PKCS12 specification allows certain fields to be
NULL, but OpenSSL did not correctly check for this case. A fix has been
applied to prevent a NULL pointer dereference that results in OpenSSL
crashing. If an application processes PKCS12 files from an untrusted source
using the OpenSSL APIs then that application will be vulnerable to this
issue prior to this fix.

OpenSSL APIs that were vulnerable to this are: PKCS12_parse(),
PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()
and PKCS12_newpass().

We have also fixed a similar issue in SMIME_write_PKCS7(). However since this
function is related to writing data we do not consider it security
significant.

([CVE-2024-0727])

*Matt Caswell*

* When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.

An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.

The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the "-pubin" and "-check" options on untrusted data.

To resolve this issue RSA keys larger than OPENSSL_RSA_MAX_MODULUS_BITS will
now fail the check immediately with an RSA_R_MODULUS_TOO_LARGE error reason.

([CVE-2023-6237])

*Tom���� Mr��z*

* Restore the encoding of SM2 PrivateKeyInfo and SubjectPublicKeyInfo to
have the contained AlgorithmIdentifier.algorithm set to id-ecPublicKey
rather than SM2.

*Richard Levitte*

* The POLY1305 MAC (message authentication code) implementation in OpenSSL
for PowerPC CPUs saves the contents of vector registers in different
order than they are restored. Thus the contents of some of these vector
registers is corrupted when returning to the caller. The vulnerable code is
used only on newer PowerPC processors supporting the PowerISA 2.07
instructions.

The consequences of this kind of internal application state corruption can
be various - from no consequences, if the calling application does not
depend on the contents of non-volatile XMM registers at all, to the worst
consequences, where the attacker could get complete control of the
application process. However unless the compiler uses the vector registers
for storing pointers, the most likely consequence, if any, would be an
incorrect result of some application dependent calculations or a crash
leading to a denial of service.

([CVE-2023-6129])

*Rohan McLure*

* Fix excessive time spent in DH check / generation with large Q parameter
value.

Applications that use the functions DH_generate_key() to generate an
X9.42 DH key may experience long delays. Likewise, applications that use
DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check()
to check an X9.42 DH key or X9.42 DH parameters may experience long delays.
Where the key or parameters that are being checked have been obtained from
an untrusted source this may lead to a Denial of Service.

([CVE-2023-5678])

*Richard Levitte*

Import OpenSSL 3.0.8, last import was 1.1.1t

### Major changes between OpenSSL 3.0.7 and OpenSSL 3.0.8 [7 Feb 2023]

* Fixed NULL dereference during PKCS7 data verification ([CVE-2023-0401])
* Fixed X.400 address type confusion in X.509 GeneralName ([CVE-2023-0286])
* Fixed NULL dereference validating DSA public key ([CVE-2023-0217])
* Fixed Invalid pointer dereference in d2i_PKCS7 functions ([CVE-2023-0216])
* Fixed Use-after-free following BIO_new_NDEF ([CVE-2023-0215])
* Fixed Double free after calling PEM_read_bio_ex ([CVE-2022-4450])
* Fixed Timing Oracle in RSA Decryption ([CVE-2022-4304])
* Fixed X.509 Name Constraints Read Buffer Overflow ([CVE-2022-4203])
* Fixed X.509 Policy Constraints Double Locking ([CVE-2022-3996])

### Major changes between OpenSSL 3.0.6 and OpenSSL 3.0.7 [1 Nov 2022]

* Added RIPEMD160 to the default provider.
* Fixed regressions introduced in 3.0.6 version.
* Fixed two buffer overflows in punycode decoding functions.
([CVE-2022-3786]) and ([CVE-2022-3602])

### Major changes between OpenSSL 3.0.5 and OpenSSL 3.0.6 [11 Oct 2022]

* Fix for custom ciphers to prevent accidental use of NULL encryption
([CVE-2022-3358])

### Major changes between OpenSSL 3.0.4 and OpenSSL 3.0.5 [5 Jul 2022]

* Fixed heap memory corruption with RSA private key operation
([CVE-2022-2274])
* Fixed AES OCB failure to encrypt some bytes on 32-bit x86 platforms
([CVE-2022-2097])

### Major changes between OpenSSL 3.0.3 and OpenSSL 3.0.4 [21 Jun 2022]

* Fixed additional bugs in the c_rehash script which was not properly
sanitising shell metacharacters to prevent command injection
([CVE-2022-2068])

### Major changes between OpenSSL 3.0.2 and OpenSSL 3.0.3 [3 May 2022]

* Fixed a bug in the c_rehash script which was not properly sanitising shell
metacharacters to prevent command injection ([CVE-2022-1292])
* Fixed a bug in the function `OCSP_basic_verify` that verifies the signer
certificate on an OCSP response ([CVE-2022-1343])
* Fixed a bug where the RC4-MD5 ciphersuite incorrectly used the
AAD data as the MAC key ([CVE-2022-1434])
* Fix a bug in the OPENSSL_LH_flush() function that breaks reuse of the memory
occuppied by the removed hash table entries ([CVE-2022-1473])

### Major changes between OpenSSL 3.0.1 and OpenSSL 3.0.2 [15 Mar 2022]

* Fixed a bug in the BN_mod_sqrt() function that can cause it to loop forever
for non-prime moduli ([CVE-2022-0778])

### Major changes between OpenSSL 3.0.0 and OpenSSL 3.0.1 [14 Dec 2021]

* Fixed invalid handling of X509_verify_cert() internal errors in libssl
([CVE-2021-4044])
* Allow fetching an operation from the provider that owns an unexportable key
as a fallback if that is still allowed by the property query.

### Major changes between OpenSSL 1.1.1 and OpenSSL 3.0.0 [7 sep 2021]

* Enhanced 'openssl list' with many new options.
* Added migration guide to man7.
* Implemented support for fully "pluggable" TLSv1.3 groups.
* Added suport for Kernel TLS (KTLS).
* Changed the license to the Apache License v2.0.
* Moved all variations of the EVP ciphers CAST5, BF, IDEA, SEED, RC2,
RC4, RC5, and DES to the legacy provider.
* Moved the EVP digests MD2, MD4, MDC2, WHIRLPOOL and RIPEMD-160 to the legacy
provider.
* Added convenience functions for generating asymmetric key pairs.
* Deprecated the `OCSP_REQ_CTX` type and functions.
* Deprecated the `EC_KEY` and `EC_KEY_METHOD` types and functions.
* Deprecated the `RSA` and `RSA_METHOD` types and functions.
* Deprecated the `DSA` and `DSA_METHOD` types and functions.
* Deprecated the `DH` and `DH_METHOD` types and functions.
* Deprecated the `ERR_load_` functions.
* Remove the `RAND_DRBG` API.
* Deprecated the `ENGINE` API.
* Added `OSSL_LIB_CTX`, a libcrypto library context.
* Added various `_ex` functions to the OpenSSL API that support using
a non-default `OSSL_LIB_CTX`.
* Interactive mode is removed from the 'openssl' program.
* The X25519, X448, Ed25519, Ed448, SHAKE128 and SHAKE256 algorithms are
included in the FIPS provider.
* X509 certificates signed using SHA1 are no longer allowed at security
level 1 or higher. The default security level for TLS is 1, so
certificates signed using SHA1 are by default no longer trusted to
authenticate servers or clients.
* enable-crypto-mdebug and enable-crypto-mdebug-backtrace were mostly
disabled; the project uses address sanitize/leak-detect instead.
* Added a Certificate Management Protocol (CMP, RFC 4210) implementation
also covering CRMF (RFC 4211) and HTTP transfer (RFC 6712).
It is part of the crypto lib and adds a 'cmp' app with a demo configuration.
All widely used CMP features are supported for both clients and servers.
* Added a proper HTTP client supporting GET with optional redirection, POST,
arbitrary request and response content types, TLS, persistent connections,
connections via HTTP(s) proxies, connections and exchange via user-defined
BIOs (allowing implicit connections), and timeout checks.
* Added util/check-format.pl for checking adherence to the coding guidelines.
* Added OSSL_ENCODER, a generic encoder API.
* Added OSSL_DECODER, a generic decoder API.
* Added OSSL_PARAM_BLD, an easier to use API to OSSL_PARAM.
* Added error raising macros, ERR_raise() and ERR_raise_data().
* Deprecated ERR_put_error(), ERR_get_error_line(), ERR_get_error_line_data(),
ERR_peek_error_line_data(), ERR_peek_last_error_line_data() and
ERR_func_error_string().
* Added OSSL_PROVIDER_available(), to check provider availibility.
* Added 'openssl mac' that uses the EVP_MAC API.
* Added 'openssl kdf' that uses the EVP_KDF API.
* Add OPENSSL_info() and 'openssl info' to get built-in data.
* Add support for enabling instrumentation through trace and debug
output.
* Changed our version number scheme and set the next major release to
3.0.0
* Added EVP_MAC, an EVP layer MAC API, and a generic EVP_PKEY to EVP_MAC
bridge. Supported MACs are: BLAKE2, CMAC, GMAC, HMAC, KMAC, POLY1305
and SIPHASH.
* Removed the heartbeat message in DTLS feature.
* Added EVP_KDF, an EVP layer KDF and PRF API, and a generic EVP_PKEY to
EVP_KDF bridge. Supported KDFs are: HKDF, KBKDF, KRB5 KDF, PBKDF2,
PKCS12 KDF, SCRYPT, SSH KDF, SSKDF, TLS1 PRF, X9.42 KDF and X9.63 KDF.
* All of the low-level MD2, MD4, MD5, MDC2, RIPEMD160, SHA1, SHA224,
SHA256, SHA384, SHA512 and Whirlpool digest functions have been
deprecated.
* All of the low-level AES, Blowfish, Camellia, CAST, DES, IDEA, RC2,
RC4, RC5 and SEED cipher functions have been deprecated.
* All of the low-level DH, DSA, ECDH, ECDSA and RSA public key functions
have been deprecated.
* SSL 3, TLS 1.0, TLS 1.1, and DTLS 1.0 only work at security level 0,
except when RSA key exchange without SHA1 is used.
* Added providers, a new pluggability concept that will replace the
ENGINE API and ENGINE implementations.

OpenSSL 1.1.1

branches: 1.1.1.2.8;
Changes between 1.1.1c and 1.1.1d [10 Sep 2019]

*) Fixed a fork protection issue. OpenSSL 1.1.1 introduced a rewritten random
number generator (RNG). This was intended to include protection in the
event of a fork() system call in order to ensure that the parent and child
processes did not share the same RNG state. However this protection was not
being used in the default case.

A partial mitigation for this issue is that the output from a high
precision timer is mixed into the RNG state so the likelihood of a parent
and child process sharing state is significantly reduced.

If an application already calls OPENSSL_init_crypto() explicitly using
OPENSSL_INIT_ATFORK then this problem does not occur at all.
(CVE-2019-1549)
[Matthias St. Pierre]

*) For built-in EC curves, ensure an EC_GROUP built from the curve name is
used even when parsing explicit parameters, when loading a serialized key
or calling `EC_GROUP_new_from_ecpkparameters()`/
`EC_GROUP_new_from_ecparameters()`.
This prevents bypass of security hardening and performance gains,
especially for curves with specialized EC_METHODs.
By default, if a key encoded with explicit parameters is loaded and later
serialized, the output is still encoded with explicit parameters, even if
internally a "named" EC_GROUP is used for computation.
[Nicola Tuveri]

*) Compute ECC cofactors if not provided during EC_GROUP construction. Before
this change, EC_GROUP_set_generator would accept order and/or cofactor as
NULL. After this change, only the cofactor parameter can be NULL. It also
does some minimal sanity checks on the passed order.
(CVE-2019-1547)
[Billy Bob Brumley]

*) Fixed a padding oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey.
An attack is simple, if the first CMS_recipientInfo is valid but the
second CMS_recipientInfo is chosen ciphertext. If the second
recipientInfo decodes to PKCS #1 v1.5 form plaintext, the correct
encryption key will be replaced by garbage, and the message cannot be
decoded, but if the RSA decryption fails, the correct encryption key is
used and the recipient will not notice the attack.
As a work around for this potential attack the length of the decrypted
key must be equal to the cipher default key length, in case the
certifiate is not given and all recipientInfo are tried out.
The old behaviour can be re-enabled in the CMS code by setting the
CMS_DEBUG_DECRYPT flag.
(CVE-2019-1563)
[Bernd Edlinger]

*) Early start up entropy quality from the DEVRANDOM seed source has been
improved for older Linux systems. The RAND subsystem will wait for
/dev/random to be producing output before seeding from /dev/urandom.
The seeded state is stored for future library initialisations using
a system global shared memory segment. The shared memory identifier
can be configured by defining OPENSSL_RAND_SEED_DEVRANDOM_SHM_ID to
the desired value. The default identifier is 114.
[Paul Dale]

*) Correct the extended master secret constant on EBCDIC systems. Without this
fix TLS connections between an EBCDIC system and a non-EBCDIC system that
negotiate EMS will fail. Unfortunately this also means that TLS connections
between EBCDIC systems with this fix, and EBCDIC systems without this
fix will fail if they negotiate EMS.
[Matt Caswell]

*) Use Windows installation paths in the mingw builds

Mingw isn't a POSIX environment per se, which means that Windows
paths should be used for installation.
(CVE-2019-1552)
[Richard Levitte]

*) Changed DH_check to accept parameters with order q and 2q subgroups.
With order 2q subgroups the bit 0 of the private key is not secret
but DH_generate_key works around that by clearing bit 0 of the
private key for those. This avoids leaking bit 0 of the private key.
[Bernd Edlinger]

*) Significantly reduce secure memory usage by the randomness pools.
[Paul Dale]

*) Revert the DEVRANDOM_WAIT feature for Linux systems

The DEVRANDOM_WAIT feature added a select() call to wait for the
/dev/random device to become readable before reading from the
/dev/urandom device.

It turned out that this change had negative side effects on
performance which were not acceptable. After some discussion it
was decided to revert this feature and leave it up to the OS
resp. the platform maintainer to ensure a proper initialization
during early boot time.
[Matthias St. Pierre]

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.6;
OpenSSL CHANGES
_______________

This is a high-level summary of the most important changes.
For a full list of changes, see the git commit log; for example,
https://github.com/openssl/openssl/commits/ and pick the appropriate
release branch.

Changes between 1.1.0i and 1.1.1 [11 Sep 2018]

*) Add a new ClientHello callback. Provides a callback interface that gives
the application the ability to adjust the nascent SSL object at the
earliest stage of ClientHello processing, immediately after extensions have
been collected but before they have been processed. In particular, this
callback can adjust the supported TLS versions in response to the contents
of the ClientHello
[Benjamin Kaduk]

*) Add SM2 base algorithm support.
[Jack Lloyd]

*) s390x assembly pack: add (improved) hardware-support for the following
cryptographic primitives: sha3, shake, aes-gcm, aes-ccm, aes-ctr, aes-ofb,
aes-cfb/cfb8, aes-ecb.
[Patrick Steuer]

*) Make EVP_PKEY_asn1_new() a bit stricter about its input. A NULL pem_str
parameter is no longer accepted, as it leads to a corrupt table. NULL
pem_str is reserved for alias entries only.
[Richard Levitte]

*) Use the new ec_scalar_mul_ladder scaffold to implement a specialized ladder
step for prime curves. The new implementation is based on formulae from
differential addition-and-doubling in homogeneous projective coordinates
from Izu-Takagi "A fast parallel elliptic curve multiplication resistant
against side channel attacks" and Brier-Joye "Weierstrass Elliptic Curves
and Side-Channel Attacks" Eq. (8) for y-coordinate recovery, modified
to work in projective coordinates.
[Billy Bob Brumley, Nicola Tuveri]

*) Change generating and checking of primes so that the error rate of not
being prime depends on the intended use based on the size of the input.
For larger primes this will result in more rounds of Miller-Rabin.
The maximal error rate for primes with more than 1080 bits is lowered
to 2^-128.
[Kurt Roeckx, Annie Yousar]

*) Increase the number of Miller-Rabin rounds for DSA key generating to 64.
[Kurt Roeckx]

*) The 'tsget' script is renamed to 'tsget.pl', to avoid confusion when
moving between systems, and to avoid confusion when a Windows build is
done with mingw vs with MSVC. For POSIX installs, there's still a
symlink or copy named 'tsget' to avoid that confusion as well.
[Richard Levitte]

*) Revert blinding in ECDSA sign and instead make problematic addition
length-invariant. Switch even to fixed-length Montgomery multiplication.
[Andy Polyakov]

*) Use the new ec_scalar_mul_ladder scaffold to implement a specialized ladder
step for binary curves. The new implementation is based on formulae from
differential addition-and-doubling in mixed Lopez-Dahab projective
coordinates, modified to independently blind the operands.
[Billy Bob Brumley, Sohaib ul Hassan, Nicola Tuveri]

*) Add a scaffold to optionally enhance the Montgomery ladder implementation
for `ec_scalar_mul_ladder` (formerly `ec_mul_consttime`) allowing
EC_METHODs to implement their own specialized "ladder step", to take
advantage of more favorable coordinate systems or more efficient
differential addition-and-doubling algorithms.
[Billy Bob Brumley, Sohaib ul Hassan, Nicola Tuveri]

*) Modified the random device based seed sources to keep the relevant
file descriptors open rather than reopening them on each access.
This allows such sources to operate in a chroot() jail without
the associated device nodes being available. This behaviour can be
controlled using RAND_keep_random_devices_open().
[Paul Dale]

*) Numerous side-channel attack mitigations have been applied. This may have
performance impacts for some algorithms for the benefit of improved
security. Specific changes are noted in this change log by their respective
authors.
[Matt Caswell]

*) AIX shared library support overhaul. Switch to AIX "natural" way of
handling shared libraries, which means collecting shared objects of
different versions and bitnesses in one common archive. This allows to
mitigate conflict between 1.0 and 1.1 side-by-side installations. It
doesn't affect the way 3rd party applications are linked, only how
multi-version installation is managed.
[Andy Polyakov]

*) Make ec_group_do_inverse_ord() more robust and available to other
EC cryptosystems, so that irrespective of BN_FLG_CONSTTIME, SCA
mitigations are applied to the fallback BN_mod_inverse().
When using this function rather than BN_mod_inverse() directly, new
EC cryptosystem implementations are then safer-by-default.
[Billy Bob Brumley]

*) Add coordinate blinding for EC_POINT and implement projective
coordinate blinding for generic prime curves as a countermeasure to
chosen point SCA attacks.
[Sohaib ul Hassan, Nicola Tuveri, Billy Bob Brumley]

*) Add blinding to ECDSA and DSA signatures to protect against side channel
attacks discovered by Keegan Ryan (NCC Group).
[Matt Caswell]

*) Enforce checking in the pkeyutl command line app to ensure that the input
length does not exceed the maximum supported digest length when performing
a sign, verify or verifyrecover operation.
[Matt Caswell]

*) SSL_MODE_AUTO_RETRY is enabled by default. Applications that use blocking
I/O in combination with something like select() or poll() will hang. This
can be turned off again using SSL_CTX_clear_mode().
Many applications do not properly handle non-application data records, and
TLS 1.3 sends more of such records. Setting SSL_MODE_AUTO_RETRY works
around the problems in those applications, but can also break some.
It's recommended to read the manpages about SSL_read(), SSL_write(),
SSL_get_error(), SSL_shutdown(), SSL_CTX_set_mode() and
SSL_CTX_set_read_ahead() again.
[Kurt Roeckx]

*) When unlocking a pass phrase protected PEM file or PKCS#8 container, we
now allow empty (zero character) pass phrases.
[Richard Levitte]

*) Apply blinding to binary field modular inversion and remove patent
pending (OPENSSL_SUN_GF2M_DIV) BN_GF2m_mod_div implementation.
[Billy Bob Brumley]

*) Deprecate ec2_mult.c and unify scalar multiplication code paths for
binary and prime elliptic curves.
[Billy Bob Brumley]

*) Remove ECDSA nonce padding: EC_POINT_mul is now responsible for
constant time fixed point multiplication.
[Billy Bob Brumley]

*) Revise elliptic curve scalar multiplication with timing attack
defenses: ec_wNAF_mul redirects to a constant time implementation
when computing fixed point and variable point multiplication (which
in OpenSSL are mostly used with secret scalars in keygen, sign,
ECDH derive operations).
[Billy Bob Brumley, Nicola Tuveri, Cesar Pereida Garc��a,
Sohaib ul Hassan]

*) Updated CONTRIBUTING
[Rich Salz]

*) Updated DRBG / RAND to request nonce and additional low entropy
randomness from the system.
[Matthias St. Pierre]

*) Updated 'openssl rehash' to use OpenSSL consistent default.
[Richard Levitte]

*) Moved the load of the ssl_conf module to libcrypto, which helps
loading engines that libssl uses before libssl is initialised.
[Matt Caswell]

*) Added EVP_PKEY_sign() and EVP_PKEY_verify() for EdDSA
[Matt Caswell]

*) Fixed X509_NAME_ENTRY_set to get multi-valued RDNs right in all cases.
[Ingo Schwarze, Rich Salz]

*) Added output of accepting IP address and port for 'openssl s_server'
[Richard Levitte]

*) Added a new API for TLSv1.3 ciphersuites:
SSL_CTX_set_ciphersuites()
SSL_set_ciphersuites()
[Matt Caswell]

*) Memory allocation failures consistenly add an error to the error
stack.
[Rich Salz]

*) Don't use OPENSSL_ENGINES and OPENSSL_CONF environment values
in libcrypto when run as setuid/setgid.
[Bernd Edlinger]

*) Load any config file by default when libssl is used.
[Matt Caswell]

*) Added new public header file <openssl/rand_drbg.h> and documentation
for the RAND_DRBG API. See manual page RAND_DRBG(7) for an overview.
[Matthias St. Pierre]

*) QNX support removed (cannot find contributors to get their approval
for the license change).
[Rich Salz]

*) TLSv1.3 replay protection for early data has been implemented. See the
SSL_read_early_data() man page for further details.
[Matt Caswell]

*) Separated TLSv1.3 ciphersuite configuration out from TLSv1.2 ciphersuite
configuration. TLSv1.3 ciphersuites are not compatible with TLSv1.2 and
below. Similarly TLSv1.2 ciphersuites are not compatible with TLSv1.3.
In order to avoid issues where legacy TLSv1.2 ciphersuite configuration
would otherwise inadvertently disable all TLSv1.3 ciphersuites the
configuration has been separated out. See the ciphers man page or the
SSL_CTX_set_ciphersuites() man page for more information.
[Matt Caswell]

*) On POSIX (BSD, Linux, ...) systems the ocsp(1) command running
in responder mode now supports the new "-multi" option, which
spawns the specified number of child processes to handle OCSP
requests. The "-timeout" option now also limits the OCSP
responder's patience to wait to receive the full client request
on a newly accepted connection. Child processes are respawned
as needed, and the CA index file is automatically reloaded
when changed. This makes it possible to run the "ocsp" responder
as a long-running service, making the OpenSSL CA somewhat more
feature-complete. In this mode, most diagnostic messages logged
after entering the event loop are logged via syslog(3) rather than
written to stderr.
[Viktor Dukhovni]

*) Added support for X448 and Ed448. Heavily based on original work by
Mike Hamburg.
[Matt Caswell]

*) Extend OSSL_STORE with capabilities to search and to narrow the set of
objects loaded. This adds the functions OSSL_STORE_expect() and
OSSL_STORE_find() as well as needed tools to construct searches and
get the search data out of them.
[Richard Levitte]

*) Support for TLSv1.3 added. Note that users upgrading from an earlier
version of OpenSSL should review their configuration settings to ensure
that they are still appropriate for TLSv1.3. For further information see:
https://wiki.openssl.org/index.php/TLS1.3
[Matt Caswell]

*) Grand redesign of the OpenSSL random generator

The default RAND method now utilizes an AES-CTR DRBG according to
NIST standard SP 800-90Ar1. The new random generator is essentially
a port of the default random generator from the OpenSSL FIPS 2.0
object module. It is a hybrid deterministic random bit generator
using an AES-CTR bit stream and which seeds and reseeds itself
automatically using trusted system entropy sources.

Some of its new features are:
o Support for multiple DRBG instances with seed chaining.
o The default RAND method makes use of a DRBG.
o There is a public and private DRBG instance.
o The DRBG instances are fork-safe.
o Keep all global DRBG instances on the secure heap if it is enabled.
o The public and private DRBG instance are per thread for lock free
operation
[Paul Dale, Benjamin Kaduk, Kurt Roeckx, Rich Salz, Matthias St. Pierre]

*) Changed Configure so it only says what it does and doesn't dump
so much data. Instead, ./configdata.pm should be used as a script
to display all sorts of configuration data.
[Richard Levitte]

*) Added processing of "make variables" to Configure.
[Richard Levitte]

*) Added SHA512/224 and SHA512/256 algorithm support.
[Paul Dale]

*) The last traces of Netware support, first removed in 1.1.0, have
now been removed.
[Rich Salz]

*) Get rid of Makefile.shared, and in the process, make the processing
of certain files (rc.obj, or the .def/.map/.opt files produced from
the ordinal files) more visible and hopefully easier to trace and
debug (or make silent).
[Richard Levitte]

*) Make it possible to have environment variable assignments as
arguments to config / Configure.
[Richard Levitte]

*) Add multi-prime RSA (RFC 8017) support.
[Paul Yang]

*) Add SM3 implemented according to GB/T 32905-2016
[ Jack Lloyd <jack.lloyd@ribose.com>,
Ronald Tse <ronald.tse@ribose.com>,
Erick Borsboom <erick.borsboom@ribose.com> ]

*) Add 'Maximum Fragment Length' TLS extension negotiation and support
as documented in RFC6066.
Based on a patch from Tomasz Mo��
[Filipe Raimundo da Silva]

*) Add SM4 implemented according to GB/T 32907-2016.
[ Jack Lloyd <jack.lloyd@ribose.com>,
Ronald Tse <ronald.tse@ribose.com>,
Erick Borsboom <erick.borsboom@ribose.com> ]

*) Reimplement -newreq-nodes and ERR_error_string_n; the
original author does not agree with the license change.
[Rich Salz]

*) Add ARIA AEAD TLS support.
[Jon Spillett]

*) Some macro definitions to support VS6 have been removed. Visual
Studio 6 has not worked since 1.1.0
[Rich Salz]

*) Add ERR_clear_last_mark(), to allow callers to clear the last mark
without clearing the errors.
[Richard Levitte]

*) Add "atfork" functions. If building on a system that without
pthreads, see doc/man3/OPENSSL_fork_prepare.pod for application
requirements. The RAND facility now uses/requires this.
[Rich Salz]

*) Add SHA3.
[Andy Polyakov]

*) The UI API becomes a permanent and integral part of libcrypto, i.e.
not possible to disable entirely. However, it's still possible to
disable the console reading UI method, UI_OpenSSL() (use UI_null()
as a fallback).

To disable, configure with 'no-ui-console'. 'no-ui' is still
possible to use as an alias. Check at compile time with the
macro OPENSSL_NO_UI_CONSOLE. The macro OPENSSL_NO_UI is still
possible to check and is an alias for OPENSSL_NO_UI_CONSOLE.
[Richard Levitte]

*) Add a STORE module, which implements a uniform and URI based reader of
stores that can contain keys, certificates, CRLs and numerous other
objects. The main API is loosely based on a few stdio functions,
and includes OSSL_STORE_open, OSSL_STORE_load, OSSL_STORE_eof,
OSSL_STORE_error and OSSL_STORE_close.
The implementation uses backends called "loaders" to implement arbitrary
URI schemes. There is one built in "loader" for the 'file' scheme.
[Richard Levitte]

*) Add devcrypto engine. This has been implemented against cryptodev-linux,
then adjusted to work on FreeBSD 8.4 as well.
Enable by configuring with 'enable-devcryptoeng'. This is done by default
on BSD implementations, as cryptodev.h is assumed to exist on all of them.
[Richard Levitte]

*) Module names can prefixed with OSSL_ or OPENSSL_. This affects
util/mkerr.pl, which is adapted to allow those prefixes, leading to
error code calls like this:

OSSL_FOOerr(OSSL_FOO_F_SOMETHING, OSSL_FOO_R_WHATEVER);

With this change, we claim the namespaces OSSL and OPENSSL in a manner
that can be encoded in C. For the foreseeable future, this will only
affect new modules.
[Richard Levitte and Tim Hudson]

*) Removed BSD cryptodev engine.
[Rich Salz]

*) Add a build target 'build_all_generated', to build all generated files
and only that. This can be used to prepare everything that requires
things like perl for a system that lacks perl and then move everything
to that system and do the rest of the build there.
[Richard Levitte]

*) In the UI interface, make it possible to duplicate the user data. This
can be used by engines that need to retain the data for a longer time
than just the call where this user data is passed.
[Richard Levitte]

*) Ignore the '-named_curve auto' value for compatibility of applications
with OpenSSL 1.0.2.
[Tomas Mraz <tmraz@fedoraproject.org>]

*) Fragmented SSL/TLS alerts are no longer accepted. An alert message is 2
bytes long. In theory it is permissible in SSLv3 - TLSv1.2 to fragment such
alerts across multiple records (some of which could be empty). In practice
it make no sense to send an empty alert record, or to fragment one. TLSv1.3
prohibts this altogether and other libraries (BoringSSL, NSS) do not
support this at all. Supporting it adds significant complexity to the
record layer, and its removal is unlikely to cause inter-operability
issues.
[Matt Caswell]

*) Add the ASN.1 types INT32, UINT32, INT64, UINT64 and variants prefixed
with Z. These are meant to replace LONG and ZLONG and to be size safe.
The use of LONG and ZLONG is discouraged and scheduled for deprecation
in OpenSSL 1.2.0.
[Richard Levitte]

*) Add the 'z' and 'j' modifiers to BIO_printf() et al formatting string,
'z' is to be used for [s]size_t, and 'j' - with [u]int64_t.
[Richard Levitte, Andy Polyakov]

*) Add EC_KEY_get0_engine(), which does for EC_KEY what RSA_get0_engine()
does for RSA, etc.
[Richard Levitte]

*) Have 'config' recognise 64-bit mingw and choose 'mingw64' as the target
platform rather than 'mingw'.
[Richard Levitte]

*) The functions X509_STORE_add_cert and X509_STORE_add_crl return
success if they are asked to add an object which already exists
in the store. This change cascades to other functions which load
certificates and CRLs.
[Paul Dale]

*) x86_64 assembly pack: annotate code with DWARF CFI directives to
facilitate stack unwinding even from assembly subroutines.
[Andy Polyakov]

*) Remove VAX C specific definitions of OPENSSL_EXPORT, OPENSSL_EXTERN.
Also remove OPENSSL_GLOBAL entirely, as it became a no-op.
[Richard Levitte]

*) Remove the VMS-specific reimplementation of gmtime from crypto/o_times.c.
VMS C's RTL has a fully up to date gmtime() and gmtime_r() since V7.1,
which is the minimum version we support.
[Richard Levitte]

*) Certificate time validation (X509_cmp_time) enforces stricter
compliance with RFC 5280. Fractional seconds and timezone offsets
are no longer allowed.
[Emilia K��sper]

*) Add support for ARIA
[Paul Dale]

*) s_client will now send the Server Name Indication (SNI) extension by
default unless the new "-noservername" option is used. The server name is
based on the host provided to the "-connect" option unless overridden by
using "-servername".
[Matt Caswell]

*) Add support for SipHash
[Todd Short]

*) OpenSSL now fails if it receives an unrecognised record type in TLS1.0
or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to
prevent issues where no progress is being made and the peer continually
sends unrecognised record types, using up resources processing them.
[Matt Caswell]

*) 'openssl passwd' can now produce SHA256 and SHA512 based output,
using the algorithm defined in
https://www.akkadia.org/drepper/SHA-crypt.txt
[Richard Levitte]

*) Heartbeat support has been removed; the ABI is changed for now.
[Richard Levitte, Rich Salz]

*) Support for SSL_OP_NO_ENCRYPT_THEN_MAC in SSL_CONF_cmd.
[Emilia K��sper]

*) The RSA "null" method, which was partially supported to avoid patent
issues, has been replaced to always returns NULL.
[Rich Salz]