selftests: kselftest_harness: save full exit code in metadata

Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/seccomp: user_notification_addfd check nextfd is available

Currently the user_notification_addfd test checks what the next expected
file descriptor will be by incrementing a variable nextfd. This does not
account for file descriptors that may already be open before the test is
started and will cause the test to fail if any exist.

Replace nextfd++ with a function get_next_fd which will check and return
the next available file descriptor.

Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20240124141357.1243457-4-terry.tritton@linaro.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Change the syscall used in KILL_THREAD test

The Bionic version of pthread_create used on Android calls the prctl
function to give the stack and thread local storage a useful name. This
will cause the KILL_THREAD test to fail as it will kill the thread as
soon as it is created.

change the test to use getpid instead of prctl.

Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20240124141357.1243457-3-terry.tritton@linaro.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Handle EINVAL on unshare(CLONE_NEWPID)

unshare(CLONE_NEWPID) can return EINVAL if the kernel does not have the
CONFIG_PID_NS option enabled.

Add a check on these calls to skip the test if we receive EINVAL.

Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20240124141357.1243457-2-terry.tritton@linaro.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Handle arm32 corner cases better

It turns out arm32 doesn't handle syscall -1 gracefully, so skip testing
for that. Additionally skip tests that depend on clone3 when it is not
available (for example when building the seccomp selftests on an old arm
image without clone3 headers). And improve error reporting for when
nanosleep fails, as seen on arm32 since v5.15.

Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftest/seccomp: add a new test for the sync mode of seccomp_user_notify

Test output:
# RUN global.user_notification_sync ...
# OK global.user_notification_sync
ok 51 global.user_notification_sync

Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-6-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Add LoongArch selftesting support

BPF for LoongArch is supported now, add the selftesting support in
seccomp_bpf.c.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

selftests/seccomp: Add m68k support

Add m68k seccomp definitions to seccomp_bpf self test code.

Tested on ARAnyM.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-4-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

selftests/seccomp: Check CAP_SYS_ADMIN capability in the test mode_filter_without_nnp

In the "mode_filter_without_nnp" test in seccomp_bpf, there is currently
a TODO which asks to check the capability CAP_SYS_ADMIN instead of euid.
This patch adds support to check if the calling process has the flag
CAP_SYS_ADMIN, and also if this flag has CAP_EFFECTIVE set.

Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220731092529.28760-1-gautammenghani201@gmail.com

selftests/seccomp: Fix compile warning when CC=clang

clang has -Wconstant-conversion by default, and the constant 0xAAAAAAAAA
(9 As) being converted to an int, which is generally 32 bits, results
in the compile warning:

clang -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/ -lpthread seccomp_bpf.c -lcap -o seccomp_bpf
seccomp_bpf.c:812:67: warning: implicit conversion from 'long' to 'int' changes value from 45812984490 to -1431655766 [-Wconstant-conversion]
int kill = kill_how == KILL_PROCESS ? SECCOMP_RET_KILL_PROCESS : 0xAAAAAAAAA;
~~~~ ^~~~~~~~~~~
1 warning generated.

-1431655766 is the expected truncation, 0xAAAAAAAA (8 As), so use
this directly in the code to avoid the warning.

Fixes: 3932fcecd962 ("selftests/seccomp: Add test for unknown SECCOMP_RET kill behavior")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220526223407.1686936-1-zhuyifei@google.com

selftests/seccomp: Fix spelling mistake "Coud" -> "Could"

There is a spelling mistake in an error message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220504155535.239180-1-colin.i.king@gmail.com

selftests/seccomp: Add test for wait killable notifier

This verifies that if a filter is set up with the wait killable feature
that it obeys the semantics that non-fatal signals are ignored during
a notification after the notification is received.

Cases tested:
* Non-fatal signal prior to receive
* Non-fatal signal during receive
* Fatal signal after receive

The normal signal handling is tested in user_notification_signal. That
behaviour remains unchanged.

On an unsupported kernel, these tests will immediately bail as it relies
on a new seccomp flag.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-4-sargun@sargun.me

selftests/seccomp: Refactor get_proc_stat to split out file reading code

This splits up the get_proc_stat function to make it so we can use it as a
generic helper to read the nth field from multiple different files, versus
replicating the logic in multiple places.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-3-sargun@sargun.me

selftests/seccomp: Ensure that notifications come in FIFO order

When multiple notifications are waiting, ensure they show up in order, as
defined by the (predictable) seccomp notification ID. This ensures FIFO
ordering of notification delivery as notification ids are monitonic and
decided when the notification is generated (as opposed to received).

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-2-sargun@sargun.me

selftests/seccomp: Add SKIP for failed unshare()

Running the seccomp tests under the kernel with "defconfig"
shouldn't fail. Because the CONFIG_USER_NS is not supported
in "defconfig". Skipping this case instead of failing it is
better.

Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/7f7687696a5c0a2d040a24474616e945c7cf2bb5.1648599460.git.yang.guang5@zte.com.cn

selftests/seccomp: Test PTRACE_O_SUSPEND_SECCOMP without CAP_SYS_ADMIN

Add a test to check that PTRACE_O_SUSPEND_SECCOMP can't be set without
CAP_SYS_ADMIN through PTRACE_SEIZE or PTRACE_SETOPTIONS.

Signed-off-by: Jann Horn <jannh@google.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Don't call read() on TTY from background pgrp

Since commit 92d25637a3a4 ("kselftest: signal all child processes"), tests
are executed in background process groups. This means that trying to read
from stdin now throws SIGTTIN when stdin is a TTY, which breaks some
seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall.

The simplest way to fix that is probably to just use -1 instead of 0 as
the dummy read()'s FD.

Fixes: 92d25637a3a4 ("kselftest: signal all child processes")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com

selftests/seccomp: Report event mismatches more clearly

When running under tracer, more explicitly report the status and event
mismatches to help with debugging. Additionally add an "immediate kill"
test when under tracing to verify that fatal SIGSYS behaves the same
under ptrace or seccomp tracing.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20211103163039.2104830-3-keescook@chromium.org

selftests/seccomp: Stop USER_NOTIF test if kcmp() fails

If kcmp() fails during the USER_NOTIF test, the test is likely to hang,
so switch from EXPECT to ASSERT.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20211103163039.2104830-2-keescook@chromium.org

selftests/seccomp: Use __BYTE_ORDER__

Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-6-iii@linux.ibm.com

selftests/seccomp: More closely track fds being assigned

Since the open fds might not always start at "4" (especially when
running under kselftest, etc), start counting from the first assigned
fd, rather than using the more permissive EXPECT_GE(fd, 0).

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20210527032948.3730953-1-keescook@chromium.org
Reviewed-by: Rodrigo Campos <rodrigo@kinvolk.io>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Add test for atomic addfd+send

This just adds a test to verify that when using the new introduced flag
to ADDFD, a valid fd is added and returned as the syscall result.

Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-5-sargun@sargun.me

powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls

The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.

Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com

kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE

Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.

Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.

Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk

selftests/seccomp: Accept any valid fd in user_notification_addfd

This test expects fds to have specific values, which works fine
when the test is run standalone. However, the kselftest runner
consumes a couple of extra fds for redirection when running
tests, so the test fails when run via kselftest.

Change the test to pass on any valid fd number.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/seccomp: sh: Fix register names

It looks like the seccomp selftests was never actually built for sh.
This fixes it, though I don't have an environment to do a runtime test
of it yet.

Fixes: 0bb605c2c7f2b4b3 ("sh: Add SECCOMP_FILTER")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: powerpc: Fix typo in macro variable name

A typo sneaked into the powerpc selftest. Fix the name so it builds again.

Fixes: 46138329faea ("selftests/seccomp: powerpc: Fix seccomp return value testing")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/clone3: Avoid OS-defined clone_args

As the UAPI headers start to appear in distros, we need to avoid
outdated versions of struct clone_args to be able to test modern
features, named "struct __clone_args". Additionally update the struct
size macro names to match UAPI names.

Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921075432.u4gis3s2o5qrsb5g@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit

Some archs (like powerpc) only support changing the return code during
syscall exit when ptrace is used. Test entry vs exit phases for which
portions of the syscall number and return values need to be set at which
different phases. For non-powerpc, all changes are made during ptrace
syscall entry, as before. For powerpc, the syscall number is changed at
ptrace syscall entry and the syscall return value is changed on ptrace
syscall exit.

Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/linux-kselftest/20200911181012.171027-1-cascardo@canonical.com/
Fixes: 58d0a862f573 ("seccomp: add tests for ptrace hole")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921075300.7iylzof2w5vrutah@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Allow syscall nr and ret value to be set separately

In preparation for setting syscall nr and ret values separately, refactor
the helpers to take a pointer to a value, so that a NULL can indicate
"do not change this respective value". This is done to keep the regset
read/write happening once and in one code path.

Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921075031.j4gruygeugkp2zwd@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Record syscall during ptrace entry

In preparation for performing actions during ptrace syscall exit, save
the syscall number during ptrace syscall entry. Some architectures do
no have the syscall number available during ptrace syscall exit.

Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/linux-kselftest/20200911181012.171027-1-cascardo@canonical.com/
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/20200921074354.6shkt2e5yhzhj3sn@wittgenstein/
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: powerpc: Fix seccomp return value testing

On powerpc, the errno is not inverted, and depends on ccr.so being
set. Add this to a powerpc definition of SYSCALL_RET_SET().

Co-developed-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/linux-kselftest/20200911181012.171027-1-cascardo@canonical.com/
Fixes: 5d83c2b37d43 ("selftests/seccomp: Add powerpc support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-13-keescook@chromium.org
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET

Instead of special-casing the specific case of shared registers, create
a default SYSCALL_RET_SET() macro (mirroring SYSCALL_NUM_SET()), that
writes to the SYSCALL_RET register. For architectures that can't set the
return value (for whatever reason), they can define SYSCALL_RET_SET()
without an associated SYSCALL_RET() macro. This also paves the way for
architectures that need to do special things to set the return value
(e.g. powerpc).

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-12-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Avoid redundant register flushes

When none of the registers have changed, don't flush them back. This can
happen if the architecture uses a non-register way to change the syscall
(e.g. arm64) , and a return value hasn't been written.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-11-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG

Consolidate the REGSET logic into the new ARCH_GETREG() and
ARCH_SETREG() macros, avoiding more #ifdef code in function bodies.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-10-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG

Instead of special-casing the get/set-registers routines, move the
HAVE_GETREG logic into the new ARCH_GETREG() and ARCH_SETREG() macros.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-9-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Remove syscall setting #ifdefs

With all architectures now using the common SYSCALL_NUM_SET() macro, the
arch-specific #ifdef can be removed from change_syscall() itself.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-8-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: mips: Remove O32-specific macro

Instead of having the mips O32 macro special-cased, pull the logic into
the SYSCALL_NUM() macro. Additionally include the ABI headers, since
these appear to have been missing, leaving __NR_O32_Linux undefined.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-7-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro

Remove the arm64 special-case in change_syscall().

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-6-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: arm: Define SYSCALL_NUM_SET macro

Remove the arm special-case in change_syscall().

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-5-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: mips: Define SYSCALL_NUM_SET macro

Remove the mips special-case in change_syscall().

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-4-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Provide generic syscall setting macro

In order to avoid "#ifdef"s in the main function bodies, create a new
macro, SYSCALL_NUM_SET(), where arch-specific logic can live.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-3-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Refactor arch register macros to avoid xtensa special case

To avoid an xtensa special-case, refactor all arch register macros to
take the register variable instead of depending on the macro expanding
as a struct member name.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-2-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Use __NR_mknodat instead of __NR_mknod

The __NR_mknod syscall doesn't exist on arm64 (only __NR_mknodat).
Switch to the modern syscall.

Fixes: ad5682184a81 ("selftests/seccomp: Check for EPOLLHUP for user_notif")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-16-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>

selftests/seccomp: Use bitwise instead of arithmetic operator for flags

This silences the following coccinelle warning:

"WARNING: sum of probable bitmasks, consider |"

tools/testing/selftests/seccomp/seccomp_bpf.c:3131:17-18: WARNING: sum of probable bitmasks, consider |
tools/testing/selftests/seccomp/seccomp_bpf.c:3133:18-19: WARNING: sum of probable bitmasks, consider |
tools/testing/selftests/seccomp/seccomp_bpf.c:3134:18-19: WARNING: sum of probable bitmasks, consider |
tools/testing/selftests/seccomp/seccomp_bpf.c:3135:18-19: WARNING: sum of probable bitmasks, consider |

Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1586924101-65940-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Add test for unknown SECCOMP_RET kill behavior

While we were testing for the behavior of unknown seccomp filter return
values, there was no test for how it acted in a thread group. Add a test
in the thread group tests for this.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

sh: Add SECCOMP_FILTER

Port sh to use the new SECCOMP_FILTER code.

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>

csky: Add SECCOMP_FILTER supported

secure_computing() is called first in syscall_trace_enter() so that
a system call will be aborted quickly without doing succeeding syscall
tracing if seccomp rules want to deny that system call.

TODO:
- Update https://github.com/seccomp/libseccomp csky support

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

selftests/seccomp: add xtensa support

Xtensa syscall number can be obtained and changed through the
struct user_pt_regs. Syscall return value register is fixed relatively
to the current register window in the user_pt_regs, so it needs a bit of
special treatment.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

selftests/seccomp: Check ENOSYS under tracing

There should be no difference between -1 and other negative syscalls
while tracing.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Will Deacon <will@kernel.org>
Cc: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/seccomp: Refactor to use fixture variants

Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD

Test whether we can add file descriptors in response to notifications.
This injects the file descriptors via notifications, and then uses kcmp
to determine whether or not it has been successful.

It also includes some basic sanity checking for arguments.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Palmer <palmer@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Robert Sesek <rsesek@google.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Matt Denton <mpdenton@google.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200603011044.7972-5-sargun@sargun.me
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Check ENOSYS under tracing

There should be no difference between -1 and other negative syscalls
while tracing.

Cc: Keno Fischer <keno@juliacomputing.com>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Refactor to use fixture variants

Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID

When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.

Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall()

The user_trap_syscall() helper creates a filter with
SECCOMP_RET_USER_NOTIF. To avoid confusion with SECCOMP_RET_TRAP, rename
the helper to user_notif_syscall().

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Make kcmp() less required

The seccomp tests are a bit noisy without CONFIG_CHECKPOINT_RESTORE (due
to missing the kcmp() syscall). The seccomp tests are more accurate with
kcmp(), but it's not strictly required. Refactor the tests to use
alternatives (comparing fd numbers), and provide a central test for
kcmp() so there is a single SKIP instead of many. Continue to produce
warnings for the other tests, though.

Additionally adds some more bad flag EINVAL tests to the addfd selftest.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Expand benchmark to per-filter measurements

It's useful to see how much (at a minimum) each filter adds to the
syscall overhead. Add additional calculations.

Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Check for EPOLLHUP for user_notif

This verifies we're correctly notified when a seccomp filter becomes
unused when a notifier is in use.

Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200531115031.391515-4-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Set NNP for TSYNC ESRCH flag test

The TSYNC ESRCH flag test will fail for regular users because NNP was
not set yet. Add NNP setting.

Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together")
Cc: stable@vger.kernel.org
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Add SKIPs for failed unshare()

Running the seccomp tests as a regular user shouldn't just fail tests
that require CAP_SYS_ADMIN (for getting a PID namespace). Instead,
detect those cases and SKIP them. Additionally, gracefully SKIP missing
CONFIG_USER_NS (and add to "config" since we'd prefer to actually test
this case).

Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Rename XFAIL to SKIP

The kselftests will be renaming XFAIL to SKIP in the test harness, and
to avoid painful conflicts, rename XFAIL to SKIP now in a future-proofed
way.

Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/harness: Refactor XFAIL into SKIP

Plumb the old XFAIL result into a TAP SKIP.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/seccomp: s390 shares the syscall and return value register

s390 cannot set syscall number and reture code at the same time,
so set the appropriate flag to indicate it.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

selftests/seccomp: allow clock_nanosleep instead of nanosleep

glibc 2.31 calls clock_nanosleep when its nanosleep function is used. So
the restart_syscall fails after that. In order to deal with it, we trace
clock_nanosleep and nanosleep. Then we check for either.

This works just fine on systems with both glibc 2.30 and glibc 2.31,
whereas it failed before on a system with glibc 2.31.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/seccomp: Adjust test fixture counts

The seccomp selftest reported the wrong test counts since it was using
slightly the wrong API for defining text fixtures. Adjust the API usage.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

seccomp: allow TSYNC and USER_NOTIF together

The restriction introduced in 7a0df7fbc145 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).

Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.

So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.

Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV

This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Zero out seccomp_notif

The seccomp_notif structure should be zeroed out prior to calling the
SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check
whether these structures were zeroed out or not, so these worked.

This patch zeroes out the seccomp_notif data structure prior to calling
the ioctl.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

riscv: add support for SECCOMP and SECCOMP_FILTER

This patch was extensively tested on Fedora/RISCV (applied by default on
top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc
on QEMU and SiFive Unleashed board.

libseccomp (userspace) was rebased:
https://github.com/seccomp/libseccomp/pull/134

Fully passes libseccomp regression testing (simulation and live).

There is one failing kernel selftest: global.user_notification_signal

v1 -> v2:
- return immediately if secure_computing(NULL) returns -1
- fixed whitespace issues
- add missing seccomp.h
- remove patch #2 (solved now)
- add riscv to seccomp kernel selftest

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: keescook@chromium.org
Cc: me@carlosedp.com
Tested-by: Carlos de Paula <me@carlosedp.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/linux-riscv/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-riscv/CAJr-aD=UnCN9E_mdVJ2H5nt=6juRSWikZnA5HxDLQxXLbsRz-w@mail.gmail.com/
[paul.walmsley@sifive.com: cleaned up Cc: lines; fixed spelling and
checkpatch issues; updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

seccomp: fix SECCOMP_USER_NOTIF_FLAG_CONTINUE test

The ifndef for SECCOMP_USER_NOTIF_FLAG_CONTINUE was placed under the
ifndef for the SECCOMP_FILTER_FLAG_NEW_LISTENER feature. This will not
work on systems that do support SECCOMP_FILTER_FLAG_NEW_LISTENER but do not
support SECCOMP_USER_NOTIF_FLAG_CONTINUE. So move the latter ifndef out of
the former ifndef's scope.

2019-10-20 11:14:01 make run_tests -C seccomp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.6-0eebfed2954f152259cae0ad57b91d3ea92968e8/tools/testing/selftests/seccomp'
gcc -Wl,-no-as-needed -Wall seccomp_bpf.c -lpthread -o seccomp_bpf
seccomp_bpf.c: In function ‘user_notification_continue’:
seccomp_bpf.c:3562:15: error: ‘SECCOMP_USER_NOTIF_FLAG_CONTINUE’ undeclared (first use in this function)
resp.flags = SECCOMP_USER_NOTIF_FLAG_CONTINUE;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
seccomp_bpf.c:3562:15: note: each undeclared identifier is reported only once for each function it appears in
Makefile:12: recipe for target 'seccomp_bpf' failed
make: *** [seccomp_bpf] Error 1
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.6-0eebfed2954f152259cae0ad57b91d3ea92968e8/tools/testing/selftests/seccomp'

Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 0eebfed2954f ("seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE")
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191021091055.4644-1-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE

Test whether a syscall can be performed after having been intercepted by
the seccomp notifier. The test uses dup() and kcmp() since it allows us to
nicely test whether the dup() syscall actually succeeded by comparing whether
the fds refer to the same underlying struct file.

Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Tycho Andersen <tycho@tycho.ws>
CC: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20190920083007.11475-4-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: avoid overflow in implicit constant conversion

USER_NOTIF_MAGIC is assigned to int variables in this test so set it to INT_MAX
to avoid warnings:

seccomp_bpf.c: In function ‘user_notification_continue’:
seccomp_bpf.c:3088:26: warning: overflow in implicit constant conversion [-Woverflow]
#define USER_NOTIF_MAGIC 116983961184613L
^
seccomp_bpf.c:3572:15: note: in expansion of macro ‘USER_NOTIF_MAGIC’
resp.error = USER_NOTIF_MAGIC;
^~~~~~~~~~~~~~~~

Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: stable@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20190920083007.11475-3-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: fix build on older kernels

The seccomp selftest goes to some length to build against older kernel
headers, viz. all the #ifdefs at the beginning of the file.

Commit 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request")
introduces some additional macros, but doesn't do the #ifdef dance.
Let's add that dance here to avoid:

gcc -Wl,-no-as-needed -Wall seccomp_bpf.c -lpthread -o seccomp_bpf
In file included from seccomp_bpf.c:51:
seccomp_bpf.c: In function ‘tracer_ptrace’:
seccomp_bpf.c:1787:20: error: ‘PTRACE_EVENTMSG_SYSCALL_ENTRY’ undeclared (first use in this function); did you mean ‘PTRACE_EVENT_CLONE’?
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
__typeof__(_expected) __exp = (_expected); \
^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~
seccomp_bpf.c:1787:20: note: each undeclared identifier is reported only once for each function it appears in
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
__typeof__(_expected) __exp = (_expected); \
^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~
seccomp_bpf.c:1788:6: error: ‘PTRACE_EVENTMSG_SYSCALL_EXIT’ undeclared (first use in this function); did you mean ‘PTRACE_EVENT_EXIT’?
: PTRACE_EVENTMSG_SYSCALL_EXIT, msg);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
__typeof__(_expected) __exp = (_expected); \
^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~
make: *** [Makefile:12: seccomp_bpf] Error 1

[skhan@linuxfoundation.org: Fix checkpatch error in commit log]
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

ptrace: add PTRACE_GET_SYSCALL_INFO request

PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.

There are two reasons for a special syscall-related ptrace request.

Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls. Some examples include:

* The notorious int-0x80-from-64-bit-task issue. See [1] for details.
In short, if a 64-bit task performs a syscall through int 0x80, its
tracer has no reliable means to find out that the syscall was, in
fact, a compat syscall, and misidentifies it.

* Syscall-enter-stop and syscall-exit-stop look the same for the
tracer. Common practice is to keep track of the sequence of
ptrace-stops in order not to mix the two syscall-stops up. But it is
not as simple as it looks; for example, strace had a (just recently
fixed) long-standing bug where attaching strace to a tracee that is
performing the execve system call led to the tracer identifying the
following syscall-exit-stop as syscall-enter-stop, which messed up
all the state tracking.

* Since the introduction of commit 84d77d3f06e7 ("ptrace: Don't allow
accessing an undumpable mm"), both PTRACE_PEEKDATA and
process_vm_readv become unavailable when the process dumpable flag is
cleared. On such architectures as ia64 this results in all syscall
arguments being unavailable for the tracer.

Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee. For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.

ptrace(2) man page:

long ptrace(enum __ptrace_request request, pid_t pid,
void *addr, void *data);
...
PTRACE_GET_SYSCALL_INFO
Retrieve information about the syscall that caused the stop.
The information is placed into the buffer pointed by "data"
argument, which should be a pointer to a buffer of type
"struct ptrace_syscall_info".
The "addr" argument contains the size of the buffer pointed to
by "data" argument (i.e., sizeof(struct ptrace_syscall_info)).
The return value contains the number of bytes available
to be written by the kernel.
If the size of data to be written by the kernel exceeds the size
specified by "addr" argument, the output is truncated.

[ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO]
Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org
Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.org
Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org>
Co-developed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 481

Based on 1 normalized pattern(s):

use of this source code is governed by the gplv2 license

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.507272547@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/seccomp: Prepare for exclusive seccomp flags

Some seccomp flags will become exclusive, so the selftest needs to
be adjusted to mask those out and test them individually for the "all
flags" tests.

Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: James Morris <jamorris@linux.microsoft.com>

selftests/seccomp: Handle namespace failures gracefully

When running without USERNS or PIDNS the seccomp test would hang since
it was waiting forever for the child to trigger the user notification
since it seems the glibc() abort handler makes a call to getpid(),
which would trap again. This changes the getpid filter to getppid, and
makes sure ASSERTs execute to stop from spawning the listener.

Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org # > 5.0
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/seccomp: Actually sleep for 1/10th second

Clang noticed that some none-zero sleep()s were actually using zero
anyway. This switches to nanosleep() to gain sub-second granularity.

seccomp_bpf.c:2625:9: warning: implicit conversion from 'double' to
'unsigned int' changes value from 0.1 to 0 [-Wliteral-conversion]
sleep(0.1);
~~~~~ ^~~

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests: unshare userns in seccomp pidns testcases

The pid ns cannot be unshare()d as an unprivileged user without owning the
userns as well. Let's unshare the userns so that we can subsequently
unshare the pidns.

This also means that we don't need to set the no new privs bit as in the
other test cases, since we're unsharing the userns.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests: set NO_NEW_PRIVS bit in seccomp user tests

seccomp() doesn't allow users who aren't root in their userns to attach
filters unless they have the nnp bit set, so let's set it so that these
tests can pass when run as an unprivileged user.

This idea stolen from the other seccomp tests, which use this trick :)

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests: skip seccomp get_metadata test if not real root

The get_metadata() test requires real root, so let's skip it if we're not
real root.

Note that I used XFAIL here because that's what the test does later if
CONFIG_CHEKCKPOINT_RESTORE happens to not be enabled. After looking at the
code, there doesn't seem to be a nice way to skip tests defined as TEST(),
since there's no return code (I tried exit(KSFT_SKIP), but that didn't work
either...). So let's do it this way to be consistent, and easier to fix
when someone comes along and fixes it.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests: fix typo in seccomp_bpf.c

There used to be an explanation here because it could trigger lockdep
previously, but now we're not doing recursive locking, so it really is just
for grins.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests: don't kill child immediately in get_metadata() test

This this test forks a child, and then the parent waits for a write() to a
pipe signalling the child is ready to be attached to. If something in the
child ASSERTs before it does this write, the test will hang waiting for it.
Instead, let's EXPECT, so that execution continues until we do the write.
Any failure after that is fine and can ASSERT.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests/seccomp: Enhance per-arch ptrace syscall skip tests

Passing EPERM during syscall skipping was confusing since the test wasn't
actually exercising the errno evaluation -- it was just passing a literal
"1" (EPERM). Instead, expand the tests to check both direct value returns
(positive, 45000 in this case), and errno values (negative, -ESRCH in this
case) to check both fake success and fake failure during syscall skipping.

Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: a33b2d0359a0 ("selftests/seccomp: Add tests for basic ptrace actions")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests/seccomp: Abort without user notification support

In the face of missing user notification support, the self test needs
to stop executing a test (ASSERT_*) instead of just reporting and
continuing (EXPECT_*). This adjusts the user notification tests to do
that where needed.

Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

selftests/seccomp: Remove SIGSTOP si_pid check

Commit f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP")
means that the seccomp selftest cannot check si_pid under SIGSTOP anymore.
Since it's believed[1] there are no other userspace things depending on the
old behavior, this removes the behavioral check in the selftest, since it's
more a "extra" sanity check (which turns out, maybe, not to have been
useful to test).

[1] https://lkml.kernel.org/r/CAGXu5jJaZAOzP1qFz66tYrtbuywqb+UN2SOA1VLHpCCOiYvYeg@mail.gmail.com

Reported-by: Tycho Andersen <tycho@tycho.ws>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>

seccomp: add a return code to trap to userspace

This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.

The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.

As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).

This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.

The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.

Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Add filter flag to opt-out of SSB mitigation

If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

selftests/seccomp: Allow get_metadata to XFAIL

Since seccomp_get_metadata() depends on CHECKPOINT_RESTORE, XFAIL the
test if the ptrace reports it as missing.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

seccomp: add a selftest for get_metadata

Let's test that we get the flags correctly, and that we preserve the filter
index across the ptrace(PTRACE_SECCOMP_GET_METADATA) correctly.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests: seccomp: fix compile error seccomp_bpf

aarch64-linux-gnu-gcc -Wl,-no-as-needed -Wall
-lpthread seccomp_bpf.c -o seccomp_bpf
seccomp_bpf.c: In function 'tracer_ptrace':
seccomp_bpf.c:1720:12: error: '__NR_open' undeclared
(first use in this function)
if (nr == __NR_open)
^~~~~~~~~
seccomp_bpf.c:1720:12: note: each undeclared identifier is reported
only once for each function it appears in
In file included from seccomp_bpf.c:48:0:
seccomp_bpf.c: In function 'TRACE_syscall_ptrace_syscall_dropped':
seccomp_bpf.c:1795:39: error: '__NR_open' undeclared
(first use in this function)
EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_open));
^
open(2) is a legacy syscall, replaced with openat(2) since 2.6.16.
Thus new architectures in the kernel, such as arm64, don't implement
these legacy syscalls.

Fixes: a33b2d0359a0 ("selftests/seccomp: Add tests for basic ptrace
actions")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: Support glibc 2.26 siginfo_t.h

The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.

Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests: Enhance kselftest_harness.h to print which assert failed

When a test process is not able to write to TH_LOG_STREAM, this step
mechanism enable to print the assert number which triggered the failure.
This can be enabled by setting _metadata->no_print to true at the
beginning of the test sequence.

Update the seccomp-bpf test to return 0 if a test succeeded.

This feature is needed for the Landlock tests.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Link: https://lkml.kernel.org/r/CAGXu5j+D-FP8Kt9unNOqKrQJP4DYTpmgkJxWykZyrYiVPz3Y3Q@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: Test thread vs process killing

This verifies that SECCOMP_RET_KILL_PROCESS is higher priority than
SECCOMP_RET_KILL_THREAD. (This also moves a bunch of defines up earlier
in the file to use them earlier.)

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>

seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD

In preparation for adding SECCOMP_RET_KILL_PROCESS, rename SECCOMP_RET_KILL
to the more accurate SECCOMP_RET_KILL_THREAD.

The existing selftest values are intentionally left as SECCOMP_RET_KILL
just to be sure we're exercising the alias.

Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Action to log before allowing

Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.

This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.

The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.

SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.

Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.

With this patch, the logic for deciding if an action will be logged is:

if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW

Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.

SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.

This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.

Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.

Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.

With this patch, the logic for deciding if an action will be logged is:

if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Selftest for detection of filter flag support

Userspace needs to be able to reliably detect the support of a filter
flag. A good way of doing that is by attempting to enter filter mode,
with the flag bit(s) in question set, and a NULL pointer for the args
parameter of seccomp(2). EFAULT indicates that the flag is valid and
EINVAL indicates that the flag is invalid.

This patch adds a selftest that can be used to test this method of
detection in userspace.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Operation for checking if an action is available

Userspace code that needs to check if the kernel supports a given action
may not be able to use the /proc/sys/kernel/seccomp/actions_avail
sysctl. The process may be running in a sandbox and, therefore,
sufficient filesystem access may not be available. This patch adds an
operation to the seccomp(2) syscall that allows userspace code to ask
the kernel if a given action is available.

If the action is supported by the kernel, 0 is returned. If the action
is not supported by the kernel, -1 is returned with errno set to
-EOPNOTSUPP. If this check is attempted on a kernel that doesn't support
this new operation, -1 is returned with errno set to -EINVAL meaning
that userspace code will have the ability to differentiate between the
two error cases.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Refactor RET_ERRNO tests

This refactors the errno tests (since they all use the same pattern for
their filter) and adds a RET_DATA field ordering test.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>

selftests/seccomp: Add tests for basic ptrace actions

This adds tests for using only ptrace to perform syscall changes, just
to validate matching behavior between seccomp events and ptrace events.

Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Adjust selftests to avoid double-join

While glibc's pthread implementation is rather forgiving about repeat
thread joining, Bionic has recently become much more strict. To deal with
this, actually track which threads have been successfully joined and kill
the rest at teardown.

Based on a patch from Paul Lawrence.

Cc: Paul Lawrence <paullawrence@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests: kselftest_harness: Fix compile warning

Do not confuse the compiler with a semicolon preceding a block. Replace
the semicolon with an empty block to avoid a warning:

gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf
In file included from seccomp_bpf.c:40:0:
seccomp_bpf.c: In function ‘change_syscall’:
../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
for (; _metadata->trigger; _metadata->trigger = __bail(_assert))
^
../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’
} while (0); OPTIONAL_HANDLER(_assert)
^~~~~~~~~~~~~~~~
../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’
__EXPECT(expected, seen, ==, 0)
^~~~~~~~
seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(0, ret);
^~~~~~~~~
seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’
{
^

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests: Make test_harness.h more generally available

The seccomp/test_harness.h file contains useful helpers to build tests.
Moving it to the selftest directory should benefit to other test
components.

Keep seccomp maintainers for this file.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Drewry <wad@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/CAGXu5j+8CVz8vL51DRYXqOY=xc3zuKFf=PTENe88XYHzFYidUQ@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

seccomp: add tests for ptrace hole

One problem with seccomp was that ptrace could be used to change a
syscall after seccomp filtering had completed. This was a well documented
limitation, and it was recommended to block ptrace when defining a filter
to avoid this problem. This can be quite a limitation for containers or
other places where ptrace is desired even under seccomp filters.

This adds tests for both SECCOMP_RET_TRACE and PTRACE_SYSCALL manipulations.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>

parisc: Add ARCH_TRACEHOOK and regset support

By adding TRACEHOOK support we now get a clean user interface to access
registers via PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS and
PTRACE_SETFPREGS.

The user-visible regset struct user_regs_struct and user_fp_struct are
modelled similiar to x86 and can be accessed via PTRACE_GETREGSET.

Signed-off-by: Helge Deller <deller@gmx.de>

selftests/seccomp: add MIPS self-test support

This adds self-test support on MIPS, based on RFC patch from Kees Cook.
Modifications from the RFC:
- support the O32 syscall which passes the real syscall number in a0.
- Use PTRACE_{GET,SET}REGS
- Because SYSCALL_NUM and SYSCALL_RET are the same register, it is not
possible to test modifying the syscall return value when skipping,
since both would need to set the same register. Therefore modify that
test case to just detect the skipped test.
Tested on MIPS32r2 / MIPS64r2 with O32, N32 and N64 userlands.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Cc: IMG-MIPSLinuxKerneldevelopers@imgtec.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12977/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

selftest/seccomp: Fix the seccomp(2) signature

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNC

Rename SECCOMP_FLAG_FILTER_TSYNC to SECCOMP_FILTER_FLAG_TSYNC to match
the UAPI.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOK

Some architectures do not implement PTRACE_GETREGSET nor
PTRACE_SETREGSET (required by HAVE_ARCH_TRACEHOOK) but only implement
PTRACE_GETREGS and PTRACE_SETREGS (e.g. User-mode Linux).

This improve seccomp selftest portability for architectures without
HAVE_ARCH_TRACEHOOK support by defining a new trigger HAVE_GETREGS. For
now, this is only enabled for i386 and x86_64 architectures. This is
required to be able to run this tests on User-mode Linux.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: David Drysdale <drysdale@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Get page size from sysconf

The commit fd88d16c58c2 ("selftests/seccomp: Be more precise with
syscall arguments.") use PAGE_SIZE directly which lead to build
failure on arm64.

Replace it with generic interface(sysconf(_SC_PAGESIZE)) to fix this
failure.

Build and test successful on x86_64 and arm64.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: Be more precise with syscall arguments.

Certain syscall emulation layers strictly check that the number of
arguments match what the syscall handler expects. The KILL_one_arg_one and
KILL_one_arg_six tests passed more parameters than expected to various
syscalls, causing failures in this emulation mode. Instead, test using
syscalls that take the appropriate number of arguments.

Signed-off-by: Robert Sesek <rsesek@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: build and pass on arm64

Changing arm64 syscalls is done via a specific register set, more like s390
than like arm (specific ptrace call) and x86 (part of general registers).
Since (restarting) poll doesn't exist on arm64, switch to using nanosleep
for testing restart_syscall. And since it looks like the syscall ABI is
inconsistent on arm-compat, so we must work around it (and document it) in
the test.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: add support for s390

This adds support for s390 to the seccomp selftests. Some improvements
were made to enhance the accuracy of failure reporting, and additional
tests were added to validate assumptions about the currently traced
syscall. Also adds early asserts for running on older kernels to avoid
noise when the seccomp syscall is not implemented.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/seccomp: Add powerpc support

Wire up the syscall number and regs so the tests work on powerpc.

With the powerpc kernel support just merged, all tests pass on ppc64,
ppc64 (compat), ppc64le, ppc, ppc64e and ppc64e (compat).

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/seccomp: Make seccomp tests work on big endian

The seccomp_bpf test uses BPF_LD|BPF_W|BPF_ABS to load 32-bit values
from seccomp_data->args. On big endian machines this will load the high
word of the argument, which is not what the test wants.

Borrow a hack from samples/seccomp/bpf-helper.h which changes the offset
on big endian to account for this.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>

selftests: add seccomp suite

This imports the existing seccomp test suite into the kernel's selftests
tree. It contains extensive testing of seccomp features and corner cases.
There remain additional tests to move into the kernel tree, but they have
not yet been ported to all the architectures seccomp supports:
https://github.com/redpig/seccomp/tree/master/tests

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>