selftests/resctrl: Add resource_info_file_exists()

Feature checking done by resctrl_mon_feature_exists() covers features
represented by the feature name presence inside the 'mon_features' file
in /sys/fs/resctrl/info/L3_MON directory. There exists a different way
to represent feature support and that is by the presence of 0 or 1 in a
single file in the info/resource directory. In this case the filename
represents what feature support is being indicated.

Add a generic function to check file presence in the
/sys/fs/resctrl/info/<RESOURCE> directory.

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Split validate_resctrl_feature_request()

validate_resctrl_feature_request() is used to test both if a resource is
present in the info directory, and if a passed monitoring feature is
present in the mon_features file.

Refactor validate_resctrl_feature_request() into two smaller functions
that each accomplish one check to give feature checking more
granularity:
- Resource directory presence in the /sys/fs/resctrl/info directory.
- Feature name presence in the /sys/fs/resctrl/info/<RESOURCE>/mon_features
file.

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Add a helper for the non-contiguous test

The CAT non-contiguous selftests have to read the file responsible for
reporting support of non-contiguous CBMs in kernel (resctrl). Then the
test compares if that information matches what is reported by CPUID
output.

Add a generic helper function to read an unsigned number from
/sys/fs/resctrl/info/<RESOURCE>/<FILE>.

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Get domain id from cache id

Domain id is acquired differently depending on CPU. AMD tests use id
from L3 cache, whereas CPUs from other vendors base the id on topology
package id. In order to support L2 CAT test, this has to be
generalized.

The driver side code seems to get the domain ids from cache ids so the
approach used by the AMD branch seems to match the kernel-side code. It
will also work with L2 domain IDs as long as the cache level is
generalized.

Using the topology id was always fragile due to mismatch with the
kernel-side way to acquire the domain id. It got incorrect domain id,
e.g., when Cluster-on-Die (CoD) is enabled for CPU (but CoD is not well
suited for resctrl in the first place so it has not been a big issue if
tests don't work correctly with it).

Taking all the above into account, generalize acquiring the domain id
by taking it from the cache id and do not hard-code the cache level.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Rename resource ID to domain ID

Kernel-side calls the instances of a resource domains.

Change the resource_id naming in the selftest code to domain_id to
match the kernel side better.

Suggested-by: Maciej Wieczór-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Add helper to convert L2/3 to integer

"L2"/"L3" conversion to integer is embedded into get_cache_size()
which prevents reuse.

Create a helper for the cache string to integer conversion to make
it reusable.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Pass write_schemata() resource instead of test name

write_schemata() takes the test name as an argument and determines the
relevant resource based on the test name. Such mapping from name to
resource does not really belong to resctrlfs.c that should provide
only generic, test-independent functions.

Pass the resource stored in the test information structure to
write_schemata() instead of the test name. The new API is also more
flexible as it enables to use write_schemata() for more than one
resource within a test.

While touching the sprintf(), move the unnecessary %c that is always
'=' directly into the format string.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Introduce generalized test framework

Each test currently has a "run test" function in per test file and
another resctrl_tests.c. The functions in resctrl_tests.c are almost
identical.

Generalize the one in resctrl_tests.c such that it can be shared
between all of the tests. It makes adding new tests easier and removes
the per test if () forests.

Also add comment to CPU vendor IDs that they must be defined as bits
for a bitmask.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Restore the CPU affinity after CAT test

CAT test does not reset the CPU affinity after the benchmark.
This is relatively harmless as is because CAT test is the last
benchmark to run, however, more tests may be added later.

Store the CPU affinity the first time taskset_benchmark() is run and
add taskset_restore() which the test can call to reset the CPU mask to
its original value.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test

CAT test spawns two processes into two different control groups with
exclusive schemata. Both the processes alloc a buffer from memory
matching their allocated LLC block size and flush the entire buffer out
of caches. Since the processes are reading through the buffer only once
during the measurement and initially all the buffer was flushed, the
test isn't testing CAT.

Rewrite the CAT test to allocate a buffer sized to half of LLC. Then
perform a sequence of tests with different LLC alloc sizes starting
from half of the CBM bits down to 1-bit CBM. Flush the buffer before
each test and read the buffer twice. Observe the LLC misses on the
second read through the buffer. As the allocated LLC block gets smaller
and smaller, the LLC misses will become larger and larger giving a
strong signal on CAT working properly.

The new CAT test is using only a single process because it relies on
measured effect against another run of itself rather than another
process adding noise. The rest of the system is set to use the CBM bits
not used by the CAT test to keep the test isolated.

Replace count_bits() with count_contiguous_bits() to get the first bit
position in order to be able to calculate masks based on it.

This change has been tested with a number of systems from different
generations.

Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Exclude shareable bits from schemata in CAT test

CAT test doesn't take shareable bits into account, i.e., the test might
be sharing cache with some devices (e.g., graphics).

Introduce get_mask_no_shareable() and use it to provision an
environment for CAT test where the allocated LLC is isolated better.
Excluding shareable_bits may create hole(s) into the cbm_mask, thus add
a new helper count_contiguous_bits() to find the longest contiguous set
of CBM bits.

create_bit_mask() is needed by an upcoming CAT test rewrite so make it
available in resctrl.h right away.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Mark get_cache_size() cache_type const

get_cache_size() does not modify cache_type so it could be const.

Mark cache_type const so that const char * can be passed to it. This
prevents warnings once many of the test parameters are marked const.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Refactor get_cbm_mask() and rename to get_full_cbm()

Callers of get_cbm_mask() are required to pass a string into which the
capacity bitmask (CBM) is read. Neither CAT nor CMT tests need the
bitmask as string but just convert it into an unsigned long value.

Another limitation is that the bit mask reader can only read
.../cbm_mask files.

Generalize the bit mask reading function into get_bit_mask() such that
it can be used to handle other files besides the .../cbm_mask and
handles the unsigned long conversion within get_bit_mask() using
fscanf(). Change get_cbm_mask() to use get_bit_mask() and rename it to
get_full_cbm() to better indicate what the function does.

Return error from get_full_cbm() if the bitmask is zero for some reason
because it makes the code more robust as the selftests naturally assume
the bitmask has some bits.

Also mark cache_type const while at it and remove useless comments that
are related to processing of CBM bits.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Change function comments to say < 0 on error

A number function comments state the function return non-zero on
failure but in reality they can only return 0 on success and < 0 on
error.

Update the comments to say < 0 on error to match the behavior.

While at it, improve cat_val() comment to state that 0 means the test
was run (either pass or fail).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Return -1 instead of errno on error

A number of functions in the resctrl selftests return errno. It is
problematic because errno is positive which is often counterintuitive.
Also, every site returning errno prints the error message already with
ksft_perror() so there is not much added value in returning the precise
error code.

Simply convert all places returning errno to return -1 that is typical
userspace error code in case of failures.

While at it, improve resctrl_val() comment to state that 0 means the
test was run (either pass or fail).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Convert perror() to ksft_perror() or ksft_print_msg()

The resctrl selftest code contains a number of perror() calls. Some of
them come with hash character and some don't. The kselftest framework
provides ksft_perror() that is compatible with test output formatting
so it should be used instead of adding custom hash signs.

Some perror() calls are too far away from anything that sets error.
For those call sites, ksft_print_msg() must be used instead.

Convert perror() to ksft_perror() or ksft_print_msg().

Other related changes:
- Remove hash signs
- Remove trailing stops & newlines from ksft_perror()
- Add terminating newlines for converted ksft_print_msg()
- Use consistent capitalization
- Small fixes/tweaks to typos & grammar of the messages
- Extract error printing out of PARENT_EXIT() to be able to
differentiate

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Move run_benchmark() to a more fitting file

resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.

run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.

Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.

Remove return comment from kernel-doc since the function is type void.

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Fix schemata write error check

Writing bitmasks to the schemata can fail when the bitmask doesn't
adhere to constraints defined by what a particular CPU supports.
Some example of constraints are max length or having contiguous bits.
The driver should properly return errors when any rule concerning
bitmask format is broken.

Resctrl FS returns error codes from fprintf() only when fclose() is
called. Current error checking scheme allows invalid bitmasks to be
written into schemata file and the selftest doesn't notice because the
fclose() error code isn't checked.

Substitute fopen(), flose() and fprintf() with open(), close() and
write() to avoid error code buffering between fprintf() and fclose().

Remove newline character from the schema string after writing it to
the schemata file so it prints correctly before function return.

Pass the string generated with strerror() to the "reason" buffer so
the error message is more verbose. Extend "reason" buffer so it can hold
longer messages.

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Refactor feature check to use resource and feature name

Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.

Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.

Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Don't pass test name to fill_buf

Test name is passed to fill_buf functions so that they can loop around
buffer only once. This is required for CAT test case.

To loop around buffer only once, caller doesn't need to let fill_buf
know which test case it is. Instead, pass a boolean argument 'once'
which makes fill_buf more generic.

As run_benchmark() no longer needs to pass the test name to
run_fill_buf(), a few test running functions can be simplified to not
write the test name into the default benchmark_cmd. The has_ben
argument can also be removed now from those test running functions.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf()

run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's
also duplicated memory init code for malloc_and_init_memory == 0 case
in fill_buf() which is unused.

Remove the malloc_and_init_memory parameter and the duplicated mem init
code.

While at it, fix also a typo in run_fill_buf() prototype's argument.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Express span internally in bytes

MBA and MBM tests to use megabytes to represent span. CMT test uses
bytes. The difference requires run_benchmark() to size the buffer
differently based on the test name, which in turn requires passing the
test name into run_benchmark().

Convert MBA and MBM tests to use span internally in bytes like CMT test
to remove the internal inconsistency between the tests. Remove the test
dependent buffer sizing from run_benchmark().

This change eliminates one of the reasons why the test name has to be
passed around but there are still other users too so the test name
passing cannot yet be removed.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Convert span to size_t

Span is defined either as unsigned long or int.

Consistently use size_t everywhere for span as it refers to size of the
memory block.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Refactor remount_resctrl(bool mum_resctrlfs) to mount_resctrl()

Mount/umount of the resctrl FS is now paired nicely per test.

Rename remount_resctrl(bool mum_resctrlfs) to mount_resctrl(). Make
it unconditionally try to mount the resctrl FS and return error if
resctrl FS was mounted already.

While at it, group the mount/umount prototypes in the header.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Move resctrl FS mount/umount to higher level

A few places currently lack umounting resctrl FS on error paths:
- cmt_resctrl_val() has multiple error paths with direct return.
- cat_perf_miss_val() has multiple error paths with direct return.
In addition, validate_resctrl_feature_request() is called by
run_mbm_test() and run_mba_test(). Neither MBA nor MBM test tries to
umount resctrl FS.

Each and every test does require resctrl FS to be present already for
feature check. Thus, it makes sense to just mount it on higher level in
resctrl_tests.c and properly pair it with umount.

Move resctrl FS (re)mount/unmount into each test function in
resctrl_tests.c. Make feature validation to simply check that resctrl
FS is mounted.

As there's the final umount in main() before this change, the selftest
should not leave resctrl FS behind after the tests even if one of the
forementioned paths is taken (thus, no fixes tag).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Unmount resctrl FS before starting the first test

Resctrl FS mount/remount/umount code is hard to track. Better approach
is to use mount/umount pair for each test but that assumes resctrl FS
is not mounted beforehand.

Change umount_resctrlfs() so that it can unmount resctrl FS from any
path, and enable further simplifications into mount/remount/umount
logic by unmounting resctrl FS at the start if a pre-existing
mountpoint is found.

Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Flush stdout file buffer before executing fork()

When a process has buffered output, a child process created by fork()
will also copy buffered output. When using kselftest framework,
the output (resctrl test result message) will be printed multiple times.

Add fflush() to flush out the buffered output before executing fork().

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test

There is a comment "Set up shemata with 100% allocation on the first run"
in function mbm_setup(), but there is an increment bug and the condition
"num_of_runs == 0" will never be met and write_schemata() will never be
called to set schemata to 100%. Even if write_schemata() is called in MBM
test, since it is not supported for MBM test it does not set the schemata.
This is currently fine because resctrl_val_parm->mum_resctrlfs is always 1
and umount/mount will be run in each test to set the schemata to 100%.

To support the usage when MBM test does not unmount/remount resctrl
filesystem before the test starts, fix to call write_schemata() and
set schemata properly when the function is called for the first time.

Also, remove static local variable 'num_of_runs' because this is not
needed as there is resctrl_val_param->num_of_runs which should be used
instead like in cat_setup().

Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH

CBM_MASK_PATH is actually the path to resctrl/info.

Change the macro name to correctly indicate what it represents.

[ ij: Tweaked the changelog. ]

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Extend CPU vendor detection

Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.

Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.

Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Change a few printed messages

Change a few printed messages to report test progress more clearly.

Add a missing "\n" at the end of one printed message.

Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Fix unmount resctrl FS

umount_resctrlfs() directly attempts to unmount resctrl file system without
checking if resctrl FS is already mounted or not. It returns 0 on success
and on failure it prints an error message and returns an error status.
Calling umount_resctrlfs() when resctrl FS isn't mounted will return an
error status.

There could be situations where-in the caller might not know if resctrl
FS is already mounted or not and the caller might still want to unmount
resctrl FS if it's already mounted (For example during teardown).

To support above use cases, change umount_resctrlfs() such that it now
first checks if resctrl FS is already mounted or not and unmounts resctrl
FS only if it's already mounted.

unmount resctrl FS upon exit. For example, running only mba test on a
Broadwell (BDW) machine (MBA isn't supported on BDW CPU).

This happens because validate_resctrl_feature_request() would mount resctrl
FS to check if mba is enabled on the platform or not and finds that the H/W
doesn't support mba and hence will return false to run_mba_test(). This in
turn makes the main() function return without unmounting resctrl FS.

Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Use resctrl/info for feature detection

Resctrl test suite before running any unit test (like cmt, cat, mbm and
mba) should first check if the feature is enabled (by kernel and not just
supported by H/W) on the platform or not.
validate_resctrl_feature_request() is supposed to do that. This function
intends to grep for relevant flags in /proc/cpuinfo but there are several
issues here

1. validate_resctrl_feature_request() calls fgrep() to get flags from
/proc/cpuinfo. But, fgrep() can only return a string with maximum of 255
characters and hence the complete cpu flags are never returned.
2. The substring search logic is also busted. If strstr() finds requested
resctrl feature in the cpu flags, it returns pointer to the first
occurrence. But, the logic negates the return value of strstr() and
hence validate_resctrl_feature_request() returns false if the feature is
present in the cpu flags and returns true if the feature is not present.
3. validate_resctrl_feature_request() checks if a resctrl feature is
reported in /proc/cpuinfo flags or not. Having a cpu flag means that the
H/W supports the feature, but it doesn't mean that the kernel enabled
it. A user could selectively enable only a subset of resctrl features
using kernel command line arguments. Hence, /proc/cpuinfo isn't a
reliable source to check if a feature is enabled or not.

The 3rd issue being the major one and fixing it requires changing the way
validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the
right place to check if a resctrl feature is enabled or not, a more
appropriate place is /sys/fs/resctrl/info directory. Change
validate_resctrl_feature_request() such that,

1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not
2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not
3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy
4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has
mbm_<total/local>_bytes

Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2
variants can be added later.

Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported

check_resctrlfs_support() does the following
1. Checks if the platform supports resctrl file system or not by looking
for resctrl in /proc/filesystems
2. Calls opendir() on default resctrl file system path
(i.e. /sys/fs/resctrl)
3. Checks if resctrl file system is mounted or not by looking at
/proc/mounts

Steps 2 and 3 will fail if the platform does not support resctrl file
system. So, there is no need to check for them if step 1 fails.

Fix this by returning immediately if the platform does not support
resctrl file system.

Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Call kselftest APIs to log test results

Call kselftest APIs instead of using printf() to log test results
for cleaner code and better future extension.

Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Rename CQM test as CMT test

CMT (Cache Monitoring Technology) [1] is a H/W feature that reports cache
occupancy of a process. resctrl selftest suite has a unit test to test CMT
for LLC but the test is named as CQM (Cache Quality Monitoring).
Furthermore, the unit test source file is named as cqm_test.c and several
functions, variables, comments, preprocessors and statements widely use
"cqm" as either suffix or prefix. This rampant misusage of CQM for CMT
might confuse someone who is newly looking at resctrl selftests because
this feature is named CMT in the Intel Software Developer's Manual.

Hence, rename all the occurrences (unit test source file name, functions,
variables, comments and preprocessors) of cqm with cmt.

[1] Please see Intel SDM, Volume 3, chapter 17 and section 18 for more
information on CMT: https://software.intel.com/content/www/us/en/develop/articles/intel-sdm.html

Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Ensure sibling CPU is not same as original CPU

The resctrl tests can accept a CPU on which the tests are run and use
default of CPU #1 if it is not provided. In the CAT test a "sibling CPU"
is determined that is from the same package where another thread will be
run.

The current algorithm with which a "sibling CPU" is determined does not
take the provided/default CPU into account and when that CPU is the
first CPU in a package then the "sibling CPU" will be selected to be the
same CPU since it starts by picking the first CPU from core_siblings_list.

Fix the "sibling CPU" selection by taking the provided/default CPU into
account and ensuring a sibling that is a different CPU is selected.

Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Clean up resctrl features check

Checking resctrl features call strcmp() to compare feature strings
(e.g. "mba", "cat" etc). The checkings are error prone and don't have
good coding style. Define the constant strings in macros and call
strncmp() to solve the potential issues.

Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Fix compilation issues for global variables

Reinette reported following compilation issue on Fedora 32, gcc version
10.1.1

/usr/bin/ld: cqm_test.o:<src_dir>/cqm_test.c:22: multiple definition of
`cache_size'; cat_test.o:<src_dir>/cat_test.c:23: first defined here

The same issue is reported for long_mask, cbm_mask, count_of_bits etc
variables as well. Compiler isn't happy because these variables are
defined globally in two .c files namely cqm_test.c and cat_test.c and
the compiler during compilation finds that the variable is already
defined (multiple definition error).

Taking a closer look at the usage of these variables reveals that these
variables are used only locally in functions such as cqm_resctrl_val()
(defined in cqm_test.c) and cat_perf_miss_val() (defined in cat_test.c).
These variables are not shared between those functions. So, there is no
need for these variables to be global. Hence, fix this issue by making
them static variables.

Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Use cache index3 id for AMD schemata masks

AMD uses the cache l3 boundary for schemata masks. Update it accordigly.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Add Cache Allocation Technology (CAT) selftest

Cache Allocation Technology (CAT) selftest allocates a portion of
last level cache and starts a benchmark to read each cache
line in this portion of cache. Measure the cache misses in perf and
the misses should be equal to the number of cache lines in this
portion of cache.

We don't use CQM to calculate cache usage because some CAT enabled
platforms don't have CQM.

Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest

Cache QoS Monitoring (CQM) selftest starts stressful cache benchmark
with specified size of memory to access the cache. Last Level cache
occupancy reported by CQM should be close to the size of the memory.

Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Add MBM test

MBM (Memory Bandwidth Monitoring) test is the first implemented selftest.
It starts a stressful memory bandwidth benchmark and assigns the
bandwidth pid in a resctrl monitoring group. Read and compare perf IMC
counter and MBM total bytes for the benchmark. The numbers should be
close enough to pass the test.

Default benchmark is built-in fill_buf. But users can specify their
own benchmark by option "-b".

We can add memory bandwidth monitoring for multiple processes in the
future.

Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests/resctrl: Add basic resctrl file system operations and data

The basic resctrl file system operations and data are added for future
usage by resctrl selftest tool.

Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>