powerpc/selftests: sort mm/.gitignore, add exec_prot

Add exec_prot to to mm/.gitignore and sort the result.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-powerpc-selftest-misc-v1-1-a84cc1ef78b2@linux.ibm.com

selftests/powerpc: Add a test of 4PB SLB handling

Add a test for a bug we had in the 4PB address space SLB handling. It
was fixed in commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on
stack rather than thread_struct").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220317143925.1030447-1-mpe@ellerman.id.au

Revert "powerpc/64s: Remove PROT_SAO support"

This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05.

Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.

Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io

selftests/powerpc: Add test of stack expansion logic

We have custom stack expansion checks that it turns out are extremely
badly tested and contain bugs, surprise. So add some tests that
exercise the code and capture the current boundary conditions.

The signal test currently fails on 64-bit kernels because the 2048
byte allowance for the signal frame is too small, we will fix that in
a subsequent patch.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-1-mpe@ellerman.id.au

selftests/powerpc: Add test for pkey siginfo verification

Commit c46241a370a61 ("powerpc/pkeys: Check vma before
returning key fault error to the user") fixes a bug which
causes the kernel to set the wrong pkey in siginfo when a
pkey fault occurs after two competing threads that have
allocated different pkeys, one fully permissive and the
other restrictive, attempt to protect a common page at the
same time. This adds a test to detect the bug.

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce40b6ee270bda52e8f4088578ed2faf7d1d509a.1595821792.git.sandipan@linux.ibm.com

powerpc/64s: Remove PROT_SAO support

ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.

We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).

- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com

selftests/powerpc: Add test for execute-disabled pkeys

Apart from read and write access, memory protection keys can
also be used for restricting execute permission of pages on
powerpc. This adds a test to verify if the feature works as
expected.

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-4-sandipan@linux.ibm.com

.gitignore: add SPDX License Identifier

Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/powerpc: Add tlbie_test in .gitignore

The commit identified below added tlbie_test but forgot to add it in
.gitignore.

Fixes: 93cad5f78995 ("selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/259f9c06ed4563c4fa4fa8ffa652347278d769e7.1582847784.git.christophe.leroy@c-s.fr

selftests/powerpc: Add a test of bad (out-of-range) accesses

Userspace isn't allowed to access certain address ranges, make sure we
actually test that to at least some degree.

This would have caught the recent bug where the SLB fault handler was
incorrectly called on an out-of-range access when using the Radix MMU.
It also would have caught the bug we had in get_region_id() where we
were inserting SLB entries for bad addresses.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520102051.12103-1-mpe@ellerman.id.au

selftests/powerpc: Add missing newline at end of file

"git diff" says:

\ No newline at end of file

after modifying the file.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[mpe: Rebase since addition of another test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Add test of fork with mapping above 512TB

This tests that when a process with a mapping above 512TB forks we
correctly separate the parent and child address spaces. This exercises
the bug in the context id handling fixed in the previous commit.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Add a test of wild bctr

This tests that a bctr (Branch to counter and link), ie. a function
call, to a wildly out-of-bounds address is handled correctly.

Some old kernel versions didn't handle it correctly, see eg:

"powerpc/slb: Force a full SLB flush when we insert for a bad EA"
https://lists.ozlabs.org/pipermail/linuxppc-dev/2017-April/157397.html

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Add a test of SEGV error behaviour

Add a test case of the error code reported when we take a SEGV on a
mapped but inaccessible area. We broke this recently.

Based on a test case from John Sperbeck <jsperbeck@google.com>.

Acked-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Add a test for PROT_SAO

PROT_SAO is a powerpc-specific flag to mmap(), and we rely on arch
specific logic to allow it to be passed to mmap().

Add a small test to ensure mmap() accepts PROT_SAO. We don't have a good
way to test that it actually causes the mapping to be created with the
right flags, so for now we just touch the mapping so it's faulted in. In
future we might be able to do something better.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Add subpage protection self test.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

mpe: Fix compile errors and formatting. Add tempfile logic to Makefile.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Make git ignore all binaries in powerpc test suite

This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>