selftests/powerpc/copyloops: Add memmove_64 test

While debugging an issue, we wanted to check whether the arch specific
kernel memmove implementation is correct.
This selftest could help test that.

Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57242c1fe7aba6b7f0fcd0490303bfd5f222ee00.1631512686.git.riteshh@linux.ibm.com

x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()

In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.

Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:

On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.

Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().

Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.

One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.

[ bp: Massage a bit. ]

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com

seltests/powerpc: Add a selftest for memcpy_mcsafe

Appropriate self tests for memcpy_mcsafe

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903214359.23887-2-santosh@fossix.org

selftests/powerpc: Fix Makefiles for headers_install change

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.

This broke building all the powerpc selftests with eg:

make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed

Fix it by setting top_srcdir in the affected Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc/64: Test exception cases in copy_tofrom_user

This adds a set of test cases to test the behaviour of
copy_tofrom_user when exceptions are encountered accessing the
source or destination. Currently, copy_tofrom_user does not always
copy as many bytes as possible when an exception occurs on a store
to the destination, and that is reflected in failures in these tests.

Based on a test program from Anton Blanchard.

[paulus@ozlabs.org - test all three paths, wrote commit description,
made EX_TABLE create an exception table.]

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc/64: Test all paths through copy routines

The hand-coded assembler 64-bit copy routines include feature sections
that select one code path or another depending on which CPU we are
executing on. The self-tests for these copy routines end up testing
just one path. This adds a mechanism for selecting any desired code
path at compile time, and makes 2 or 3 versions of each test, each
using a different code path, so as to cover all the possible paths.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Add -mcpu=power4 to CFLAGS for older compilers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Fix copyloops build since Power4 assembler change

The recent commit 15a3204d24a3 ("powerpc/64s: Set assembler machine
type to POWER4") set the machine type in our ASFLAGS when building the
kernel, and removed some ".machine power4" directives from various asm
files.

This broke the selftests build on old toolchains (that don't assume
Power4), because we build the kernel source files into the selftests
using different ASFLAGS.

The fix is simply to add -mpower4 to the selftest ASFLAGS as well.

Fixes: 15a3204d24a3 ("powerpc/64s: Set assembler machine type to POWER4")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: enable O and KBUILD_OUTPUT

Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest
to another directory by passing O or KBUILD_OUTPUT. And O is high
priority than KBUILD_OUTPUT.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests: remove duplicated all and clean target

Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy to understand the purpose of these files. But mix of compiled and
uncompiled files lead to duplicated "all" and "clean" targets.

In order to remove the duplicated targets, introduce TEST_GEN_PROGS,
TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled
objects.

Also, the later patch will make use of TEST_GEN_XXX to redirect these
files to output directory indicated by KBUILD_OUTPUT or O.

And add this changes to "Contributing new tests(details)" of
Documentation/kselftest.txt.

Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests: Add install support for the powerpc tests

The bulk of the selftests are actually below the powerpc sub directory.

This adds support for installing them, when on a powerpc machine, or if
ARCH and CROSS_COMPILE are set appropriately.

This is a little more complicated because of the sub directory structure
under powerpc, but much of the common logic in lib.mk is still used. The
net effect of the patch is still a reduction in code.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>

selftests/powerpc: Build the copyloops with -maltivec

The recent change to remove the vrX defines exposed the fact that we are
building the copyloops tests without altivec enabled. It depends on the
toolchain as to whether altivec is on by default or not, so it only
breaks on some toolchains. But we should always enable it.

Fixes: c2ce6f9f3dc0 ("powerpc: Change vrX register defines to vX to match gcc and glibc")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

selftests/powerpc: Import Anton's memcpy / copy_tofrom_user tests

Turn Anton's memcpy / copy_tofrom_user test into something that can
live in tools/testing/selftests.

It requires one turd in arch/powerpc/lib/memcpy_64.S, but it's pretty
harmless IMHO.

We are sailing very close to the wind with the feature macros. We define
them to nothing, which currently means we get a few extra nops and
include the unaligned calls.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>