RISC-V: KVM: selftests: Add steal_time test support

With the introduction of steal-time accounting support for
RISC-V KVM we can add RISC-V support to the steal_time test.

Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

KVM: selftests: Rip out old, param-based guest assert macros

Drop the param-based guest assert macros and enable the printf versions
for all selftests. Note! This change can affect tests even if they
don't use directly use guest asserts! E.g. via library code, or due to
the compiler making different optimization decisions.

Link: https://lore.kernel.org/r/20230729003643.1053367-33-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Convert steal_time test to printf style GUEST_ASSERT

Convert the steal_time test to use printf-based GUEST_ASERT.
Opportunistically use GUEST_ASSERT_EQ() and GUEST_ASSERT_NE() so that the
test spits out debug information on failure.

Link: https://lore.kernel.org/r/20230729003643.1053367-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Automatically do init_ucall() for non-barebones VMs

Do init_ucall() automatically during VM creation to kill two (three?)
birds with one stone.

First, initializing ucall immediately after VM creations allows forcing
aarch64's MMIO ucall address to immediately follow memslot0. This is
still somewhat fragile as tests could clobber the MMIO address with a
new memslot, but it's safe-ish since tests have to be conversative when
accounting for memslot0. And this can be hardened in the future by
creating a read-only memslot for the MMIO page (KVM ARM exits with MMIO
if the guest writes to a read-only memslot). Add a TODO to document that
selftests can and should use a memslot for the ucall MMIO (doing so
requires yet more rework because tests assumes thay can use all memslots
except memslot0).

Second, initializing ucall for all VMs prepares for making ucall
initialization meaningful on all architectures. aarch64 is currently the
only arch that needs to do any setup, but that will change in the future
by switching to a pool-based implementation (instead of the current
stack-based approach).

Lastly, defining the ucall MMIO address from common code will simplify
switching all architectures (except s390) to a common MMIO-based ucall
implementation (if there's ever sufficient motivation to do so).

Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-4-seanjc@google.com

KVM: selftests: Use kvm_cpu_has() for KVM's PV steal time

Use kvm_cpu_has() in the stea-ltime test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().

Opportunistically define all of KVM's paravirt CPUID-based features.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-15-seanjc@google.com

KVM: selftests: Fix filename reporting in guest asserts

Fix filename reporting in guest asserts by ensuring the GUEST_ASSERT
macro records __FILE__ and substituting REPORT_GUEST_ASSERT for many
repetitive calls to TEST_FAIL.

Previously filename was reported by using __FILE__ directly in the
selftest, wrongly assuming it would always be the same as where the
assertion failed.

Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reported-by: Ricardo Koller <ricarkol@google.com>
Fixes: 4e18bccc2e5544f0be28fc1c4e6be47a469d6c60
Link: https://lore.kernel.org/r/20220615193116.806312-5-coltonlewis@google.com
[sean: convert more TEST_FAIL => REPORT_GUEST_ASSERT instances]
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add TEST_REQUIRE macros to reduce skipping copy+paste

Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.

Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.

Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Purge vm+vcpu_id == vcpu silliness

Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Convert steal_time away from VCPU_ID

Convert steal_time to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Rename vm_vcpu_add* helpers to better show relationships

Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add another underscore to inner ioctl() helpers

Add a second underscore to inner ioctl() helpers to better align with
commonly accepted kernel coding style, and to allow using a single
underscore variant in the future for macro shenanigans.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: Create helper for making SMCCC calls

The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.

Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-10-oupton@google.com

selftests: KVM: Create helper for making SMCCC calls

The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.

Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-11-oupton@google.com

selftests: KVM: Align SMCCC call with the spec in steal_time

The SMC64 calling convention passes a function identifier in w0 and its
parameters in x1-x17. Given this, there are two deviations in the
SMC64 call performed by the steal_time test: the function identifier is
assigned to a 64 bit register and the parameter is only 32 bits wide.

Align the call with the SMCCC by using a 32 bit register to handle the
function identifier and increasing the parameter width to 64 bits.

Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210921171121.2148982-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: fix get_run_delay() ignoring fscanf() return warn

Fix get_run_delay() to check fscanf() return value to get rid of the
following warning. When fscanf() fails return MIN_RUN_DELAY_NS from
get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h
so get_run_delay() and steal_time.c can use it.

lib/test_util.c: In function ‘get_run_delay’:
lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests: kvm: move get_run_delay() into lib/test_util

get_run_delay() is defined static in xen_shinfo_test and steal_time test.
Move it to lib and remove code duplication.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

KVM: selftests: change pthread_yield to sched_yield

With later GCC we get

steal_time.c: In function ‘main’:
steal_time.c:323:25: warning: ‘pthread_yield’ is deprecated: pthread_yield is deprecated, use sched_yield instead [-Wdeprecated-declarations]

Let's follow the instructions and use sched_yield instead.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210713203742.29680-2-drjones@redhat.com

KVM: selftests: Unconditionally use memslot '0' for page table allocations

Drop the memslot param from virt_pg_map() and virt_map() and shove the
hardcoded '0' down to the vm_phy_page_alloc() calls.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: fix triple fault if ept=0 in dirty_log_test

Commit 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on
default VM") moved vcpu_set_cpuid into vm_create_with_vcpus, but
dirty_log_test doesn't use it to create vm. So vcpu's CPUIDs is
not set, the guest's pa_bits in kvm would be smaller than the
value queried by userspace.

However, the dirty track memory slot is in the highest GPA, the
reserved bits in gpte would be set with wrong pa_bits.
For shadow paging, page fault would fail in permission_fault and
be injected into guest. Since guest doesn't have idt, it finally
leads to vm_exit for triple fault.

Move vcpu_set_cpuid into vm_vcpu_add_default to set supported
CPUIDs on default vcpu, since almost all tests need it.

Fixes: 22f232d134e1 ("KVM: selftests: x86: Set supported CPUIDs on default VM")
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <411ea2173f89abce56fc1fca5af913ed9c5a89c9.1624351343.git.houwenlong93@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Rework timespec functions and usage

The steal_time test's timespec stop condition was wrong and should have
used the timespec functions instead to avoid being wrong, but
timespec_diff had a strange interface. Rework all the timespec API and
its use.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Introduce steal-time test

The steal-time test confirms what is reported to the guest as stolen
time is consistent with the run_delay reported for the VCPU thread
on the host. Both x86_64 and AArch64 have the concept of steal/stolen
time so this test is introduced for both architectures.

While adding the test we ensure .gitignore has all tests listed
(it was missing s390x/resets) and that the Makefile has all tests
listed in alphabetical order (not really necessary, but it almost
was already...). We also extend the common API with a new num-guest-
pages call and a new timespec call.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>