KVM: selftests: Remove redundant newlines

TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-8-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Allow specify physical cpu list in demand paging test

Mimic the dirty log test and allow the user to pin demand paging test
tasks to physical CPUs.

Put the help message into a general helper as suggested by Sean.

Signed-off-by: Peter Xu <peterx@redhat.com>
[sean: rebase, tweak arg ordering, add "print" to helper, print program name]
Link: https://lore.kernel.org/r/20230607001226.1398889-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Setup vcpu_alias only for minor mode test

This fixes two things:

- Unbreaks MISSING mode test on anonymous memory type

- Prefault alias mem before uffd thread creations, otherwise the uffd
thread timing will be inaccurate when guest mem size is large, because
it'll take prefault time into total time.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20230427201112.2164776-2-peterx@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Fix nsec to sec conversion in demand_paging_test

demand_paging_test uses 1E8 as the denominator to convert nanoseconds to
seconds, which is wrong. Use NSEC_PER_SEC instead to fix the issue and
make the conversion obvious.

Reported-by: James Houghton <jthoughton@google.com>
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230223001805.2971237-1-amoorthy@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Rename perf_test_util symbols to memstress

Replace the perf_test_ prefix on symbol names with memstress_ to match
the new file name.

"memstress" better describes the functionality proveded by this library,
which is to provide functionality for creating and running a VM that
stresses VM memory by reading and writing to guest memory on all vCPUs
in parallel.

"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.

Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-4-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Rename perf_test_util.[ch] to memstress.[ch]

Rename the perf_test_util.[ch] files to memstress.[ch]. Symbols are
renamed in the following commit to reduce the amount of churn here in
hopes of playiing nice with git's file rename detection.

The name "memstress" was chosen to better describe the functionality
proveded by this library, which is to create and run a VM that
reads/writes to guest memory on all vCPUs in parallel.

"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.

Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation

Many KVM selftests take command line arguments which are supposed to be
positive (>0) or non-negative (>=0). Some tests do these validation and
some missed adding the check.

Add atoi_positive() and atoi_non_negative() to validate inputs in
selftests before proceeding to use those values.

Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-7-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add atoi_paranoid() to catch errors missed by atoi()

atoi() doesn't detect errors. There is no way to know that a 0 return
is correct conversion or due to an error.

Introduce atoi_paranoid() to detect errors and provide correct
conversion. Replace all atoi() calls with atoi_paranoid().

Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-4-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

KVM: selftests: Add a userfaultfd library

Move the generic userfaultfd code out of demand_paging_test.c into a
common library, userfaultfd_util. This library consists of a setup and a
stop function. The setup function starts a thread for handling page
faults using the handler callback function. This setup returns a
uffd_desc object which is then used in the stop function (to wait and
destroy the threads).

Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-2-ricarkol@google.com

KVM: selftests: Purge vm+vcpu_id == vcpu silliness

Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Stop conflating vCPU index and ID in perf tests

Track vCPUs by their 'struct kvm_vcpu' object, and stop assuming that a
vCPU's ID is the same as its index when referencing a vCPU's metadata.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Use __KVM_SYSCALL_ERROR() to handle non-KVM syscall errors

Use __KVM_SYSCALL_ERROR() to report and pretty print non-KVM syscall and
ioctl errors, e.g. for mmap(), munmap(), uffd ioctls, etc...

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move vCPU thread creation and joining to common helpers

Move vCPU thread creation and joining to common helper functions. This
is in preparation for the next commit which ensures that all vCPU
threads are fully created before entering guest mode on any one
vCPU.

No functional change intended.

Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111001257.1446428-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Sync perf_test_args to guest during VM creation

Copy perf_test_args to the guest during VM creation instead of relying on
the caller to do so at their leisure. Ideally, tests wouldn't even be
able to modify perf_test_args, i.e. they would have no motivation to do
the sync, but enforcing that is arguably a net negative for readability.

No functional change intended.

[Set wr_fract=1 by default and add helper to override it since the new
access_tracking_perf_test needs to set it dynamically.]

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-13-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Fill per-vCPU struct during "perf_test" VM creation

Fill the per-vCPU args when creating the perf_test VM instead of having
the caller do so. This helps ensure that any adjustments to the number
of pages (and thus vcpu_memory_bytes) are reflected in the per-VM args.
Automatically filling the per-vCPU args will also allow a future patch
to do the sync to the guest during creation.

Signed-off-by: Sean Christopherson <seanjc@google.com>
[Updated access_tracking_perf_test as well.]
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Use perf util's per-vCPU GPA/pages in demand paging test

Grab the per-vCPU GPA and number of pages from perf_util in the demand
paging test instead of duplicating perf_util's calculations.

Note, this may or may not result in a functional change. It's not clear
that the test's calculations are guaranteed to yield the same value as
perf_util, e.g. if guest_percpu_mem_size != vcpu_args->pages.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Refactor help message for -s backing_src

All selftests that support the backing_src option were printing their
own description of the flag and then calling backing_src_help() to dump
the list of available backing sources. Consolidate the flag printing in
backing_src_help() to align indentation, reduce duplicated strings, and
improve consistency across tests.

Note: Passing "-s" to backing_src_help is unnecessary since every test
uses the same flag. However I decided to keep it for code readability
at the call sites.

While here this opportunistically fixes the incorrectly interleaved
printing -x help message and list of backing source types in
dirty_log_perf_test.

Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210917173657.44011-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Change backing_src flag to -s in demand_paging_test

Every other KVM selftest uses -s for the backing_src, so switch
demand_paging_test to match.

Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210917173657.44011-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: KVM: Fix check for !POLLIN in demand_paging_test

The logical not operator applies only to the left hand side of a bitwise
operator. As such, the check for POLLIN not being set in revents wrong.
Fix it by adding parentheses around the bitwise expression.

Fixes: 4f72180eb4da ("KVM: selftests: Add demand paging content to the demand paging test")
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210921171121.2148982-2-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Move vcpu_args_set into perf_test_util

perf_test_util is used to set up KVM selftests where vCPUs touch a
region of memory. The guest code is implemented in perf_test_util.c (not
the calling selftests). The guest code requires a 1 parameter, the
vcpuid, which has to be set by calling vcpu_args_set(vm, vcpu_id, 1,
vcpu_id).

Today all of the selftests that use perf_test_util are making this call.
Instead, perf_test_util should just do it. This will save some code but
more importantly prevents mistakes since totally non-obvious that this
needs to be called and failing to do so results in vCPUs not accessing
the right regions of memory.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210805172821.2622793-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Support multiple slots in dirty_log_perf_test

Introduce a new option to dirty_log_perf_test: -x number_of_slots. This
causes the test to attempt to split the region of memory into the given
number of slots. If the region cannot be evenly divided, the test will
fail.

This allows testing with more than one slot and therefore measure how
performance scales with the number of memslots.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: add shared hugetlbfs backing source type

This lets us run the demand paging test on top of a shared
hugetlbfs-backed area. The "shared" is key, as this allows us to
exercise userfaultfd minor faults on hugetlbfs.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-11-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: allow using UFFD minor faults for demand paging

UFFD handling of MINOR faults is a new feature whose use case is to
speed up demand paging (compared to MISSING faults). So, it's
interesting to let this selftest exercise this new mode.

Modify the demand paging test to have the option of using UFFD minor
faults, as opposed to missing faults. Now, when turning on userfaultfd
with '-u', the desired mode has to be specified ("MISSING" or "MINOR").

If we're in minor mode, before registering, prefault via the *alias*.
This way, the guest will trigger minor faults, instead of missing
faults, and we can UFFDIO_CONTINUE to resolve them.

Modify the page fault handler function to use the right ioctl depending
on the mode we're running in. In MINOR mode, use UFFDIO_CONTINUE.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-10-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: allow different backing source types

Add an argument which lets us specify a different backing memory type
for the test. The default is just to use anonymous, matching existing
behavior.

This is in preparation for testing UFFD minor faults. For that, we'll
need to use a new backing memory type which is setup with MAP_SHARED.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-6-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: compute correct demand paging size

This is a preparatory commit needed before we can use different kinds of
backing pages for guest memory.

Previously, we used perf_test_args.host_page_size, which is the host's
native page size (commonly 4K). For VM_MEM_SRC_ANONYMOUS this turns out
to be okay, but in a follow-up commit we want to allow using different
kinds of backing memory.

Take VM_MEM_SRC_ANONYMOUS_HUGETLB for example. Without this change, if
we used that backing page type, when we issued a UFFDIO_COPY ioctl we'd
only do so with 4K, rather than the full 2M of a backing hugepage. In
this case, UFFDIO_COPY returns -EINVAL (__mcopy_atomic_hugetlb checks
the size).

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-5-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: simplify setup_demand_paging error handling

A small cleanup. Our caller writes:

r = setup_demand_paging(...);
if (r < 0) exit(-r);

Since we're just going to exit anyway, instead of returning an error we
can just re-use TEST_ASSERT. This makes the caller simpler, as well as
the function itself - no need to write our branches, etc.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-3-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: trivial comment/logging fixes

Some trivial fixes I found while touching related code in this series,
factored out into a separate commit for easier reviewing:

- s/gor/got/ and add a newline in demand_paging_test.c
- s/backing_src/src_type/ in a comment to be consistent with the real
function signature in kvm_util.c

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-2-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add backing src parameter to dirty_log_perf_test

Add a parameter to control the backing memory type for
dirty_log_perf_test so that the test can be run with hugepages.

To: linux-kselftest@vger.kernel.org
CC: Peter Xu <peterx@redhat.com>
CC: Andrew Jones <drjones@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-28-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add option to overlap vCPU memory access

Add an option to overlap the ranges of memory each vCPU accesses instead
of partitioning them. This option will increase the probability of
multiple vCPUs faulting on the same page at the same time, and causing
interesting races, if there are bugs in the page fault handler or
elsewhere in the kernel.

Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Rename timespec_diff_now to timespec_elapsed

In response to some earlier comments from Peter Xu, rename
timespec_diff_now to the much more sensible timespec_elapsed.

No functional change intended.

Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Implement perf_test_util more conventionally

It's not conventional C to put non-inline functions in header
files. Create a source file for the functions instead. Also
reduce the amount of globals and rename the functions to
something less generic.

Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201218141734.54359-4-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Use vm_create_with_vcpus in create_vm

Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201218141734.54359-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Factor out guest mode code

demand_paging_test, dirty_log_test, and dirty_log_perf_test have
redundant guest mode code. Factor it out.

Also, while adding a new include, remove the ones we don't need.

Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201218141734.54359-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Make the number of vcpus global

We also check the input number of vcpus against the maximum supported.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Make the per vcpu memory size global

Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add wrfract to common guest code

Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Simplify demand_paging_test with timespec_diff_now

Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Factor code out of demand_paging_test

Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.

No functional change expected.

This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Rework timespec functions and usage

The steal_time test's timespec stop condition was wrong and should have
used the timespec functions instead to avoid being wrong, but
timespec_diff had a strange interface. Rework all the timespec API and
its use.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: virt_map should take npages, not size

Also correct the comment and prototype for vm_create_default(),
as it takes a number of pages, not a size.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Use consistent message for test skipping

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Enable printf format warnings for TEST_ASSERT

Use the format attribute to enable printf format warnings, and
then fix them all.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: s390x: Provide additional num-guest-pages adjustment

s390 requires 1M aligned guest sizes. Embedding the rounding in
vm_adjust_num_guest_pages() allows us to remove it from a few
other places.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Rework debug message printing

There were a few problems with the way we output "debug" messages.
The first is that we used DEBUG() which is defined when NDEBUG is
not defined, but NDEBUG will never be defined for kselftests
because it relies too much on assert(). The next is that most
of the DEBUG() messages were actually "info" messages, which
users may want to turn off if they just want a silent test that
either completes or asserts. Finally, a debug message output from
a library function, and thus for all tests, was annoying when its
information wasn't interesting for a test.

Rework these messages so debug messages only output when DEBUG
is defined and info messages output unless QUIET is defined.
Also name the functions pr_debug and pr_info and make sure that
when they're disabled we eat all the inputs. The later avoids
unused variable warnings when the variables were only defined
for the purpose of printing.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Time guest demand paging

In order to quantify demand paging performance, time guest execution
during demand paging.

Signed-off-by: Ben Gardon <bgardon@google.com>
[Move timespec-diff to test_util.h]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Support multiple vCPUs in demand paging test

Most VMs have multiple vCPUs, the concurrent execution of which has a
substantial impact on demand paging performance. Add an option to create
multiple vCPUs to each access disjoint regions of memory.

Signed-off-by: Ben Gardon <bgardon@google.com>
[guest_code() can't return, use GUEST_ASSERT(). Ensure the number
of guests pages is compatible with the host.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Pass args to vCPU in global vCPU args struct

In preparation for supporting multiple vCPUs in the demand paging test,
pass arguments to the vCPU in a consolidated global struct instead of
syncing multiple globals.

Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add memory size parameter to the demand paging test

Add an argument to allow the demand paging test to work on larger and
smaller guest sizes.

Signed-off-by: Ben Gardon <bgardon@google.com>
[Rewrote parse_size() to simplify and provide user more flexibility as
to how sizes are input. Also fixed size overflow assert.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add configurable demand paging delay

When running the demand paging test with the -u option, the User Fault
FD handler essentially adds an arbitrary delay to page fault resolution.
To enable better simulation of a real demand paging scenario, add a
configurable delay to the UFFD handler.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Add demand paging content to the demand paging test

The demand paging test is currently a simple page access test which, while
potentially useful, doesn't add much versus the existing dirty logging
test. To improve the demand paging test, add a basic userfaultfd demand
paging implementation.

Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Create a demand paging test

While userfaultfd, KVM's demand paging implementation, is not specific
to KVM, having a benchmark for its performance will be useful for
guiding performance improvements to KVM. As a first step towards creating
a userfaultfd demand paging test, create a simple memory access test,
based on dirty_log_test.

Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>