#
7ce7f8e7 |
|
28-Jul-2023 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Rip out old, param-based guest assert macros Drop the param-based guest assert macros and enable the printf versions for all selftests. Note! This change can affect tests even if they don't use directly use guest asserts! E.g. via library code, or due to the compiler making different optimization decisions. Link: https://lore.kernel.org/r/20230729003643.1053367-33-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
|
#
d0ad3bac |
|
28-Jul-2023 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Convert ARM's vGIC IRQ test to printf style GUEST_ASSERT Use printf-based guest assert reporting in ARM's vGIC IRQ test. Note, this is not as innocuous as it looks! The printf-based version of GUEST_ASSERT_EQ() ensures the expressions are evaluated only once, whereas the old version did not! Link: https://lore.kernel.org/r/20230729003643.1053367-15-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
|
#
197ebb71 |
|
15-Nov-2022 |
Vishal Annapurve <vannapurve@google.com> |
KVM: selftests: move common startup logic to kvm_util.c Consolidate common startup logic in one place by implementing a single setup function with __attribute((constructor)) for all selftests within kvm_util.c. This allows moving logic like: /* Tell stdout not to buffer its content */ setbuf(stdout, NULL); to a single file for all selftests. This will also allow any required setup at entry in future to be done in common main function. Link: https://lore.kernel.org/lkml/Ywa9T+jKUpaHLu%2Fl@google.com Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Reviewed-by: Peter Gonda <pgonda@google.com> Signed-off-by: Vishal Annapurve <vannapurve@google.com> Link: https://lore.kernel.org/r/20221115213845.3348210-2-vannapurve@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
|
#
dc88244b |
|
05-Oct-2022 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Automatically do init_ucall() for non-barebones VMs Do init_ucall() automatically during VM creation to kill two (three?) birds with one stone. First, initializing ucall immediately after VM creations allows forcing aarch64's MMIO ucall address to immediately follow memslot0. This is still somewhat fragile as tests could clobber the MMIO address with a new memslot, but it's safe-ish since tests have to be conversative when accounting for memslot0. And this can be hardened in the future by creating a read-only memslot for the MMIO page (KVM ARM exits with MMIO if the guest writes to a read-only memslot). Add a TODO to document that selftests can and should use a memslot for the ucall MMIO (doing so requires yet more rework because tests assumes thay can use all memslots except memslot0). Second, initializing ucall for all VMs prepares for making ucall initialization meaningful on all architectures. aarch64 is currently the only arch that needs to do any setup, but that will change in the future by switching to a pool-based implementation (instead of the current stack-based approach). Lastly, defining the ucall MMIO address from common code will simplify switching all architectures (except s390) to a common MMIO-based ucall implementation (if there's ever sufficient motivation to do so). Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Tested-by: Peter Gonda <pgonda@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20221006003409.649993-4-seanjc@google.com
|
#
0001725d |
|
03-Nov-2022 |
Vipin Sharma <vipinsh@google.com> |
KVM: selftests: Add atoi_positive() and atoi_non_negative() for input validation Many KVM selftests take command line arguments which are supposed to be positive (>0) or non-negative (>=0). Some tests do these validation and some missed adding the check. Add atoi_positive() and atoi_non_negative() to validate inputs in selftests before proceeding to use those values. Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20221103191719.1559407-7-vipinsh@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
|
#
018ea2d7 |
|
03-Nov-2022 |
Vipin Sharma <vipinsh@google.com> |
KVM: selftests: Add atoi_paranoid() to catch errors missed by atoi() atoi() doesn't detect errors. There is no way to know that a 0 return is correct conversion or due to an error. Introduce atoi_paranoid() to detect errors and provide correct conversion. Replace all atoi() calls with atoi_paranoid(). Signed-off-by: Vipin Sharma <vipinsh@google.com> Suggested-by: David Matlack <dmatlack@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20221103191719.1559407-4-vipinsh@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
|
#
594a1c27 |
|
15-Jun-2022 |
Colton Lewis <coltonlewis@google.com> |
KVM: selftests: Fix filename reporting in guest asserts Fix filename reporting in guest asserts by ensuring the GUEST_ASSERT macro records __FILE__ and substituting REPORT_GUEST_ASSERT for many repetitive calls to TEST_FAIL. Previously filename was reported by using __FILE__ directly in the selftest, wrongly assuming it would always be the same as where the assertion failed. Signed-off-by: Colton Lewis <coltonlewis@google.com> Reported-by: Ricardo Koller <ricarkol@google.com> Fixes: 4e18bccc2e5544f0be28fc1c4e6be47a469d6c60 Link: https://lore.kernel.org/r/20220615193116.806312-5-coltonlewis@google.com [sean: convert more TEST_FAIL => REPORT_GUEST_ASSERT instances] Signed-off-by: Sean Christopherson <seanjc@google.com>
|
#
7ed397d1 |
|
27-May-2022 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Add TEST_REQUIRE macros to reduce skipping copy+paste Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded instances of selftests exiting with KSFT_SKIP after printing an informational message. In addition to reducing the amount of boilerplate code in selftests, the UPPERCASE macro names make it easier to visually identify a test's requirements. Convert usage that erroneously uses something other than print_skip() and/or "exits" with '0' or some other non-KSFT_SKIP value. Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part of the conversion. All memory and file descriptors are freed on process exit, so the explicit free is superfluous. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
#
768e9a61 |
|
02-Jun-2022 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Purge vm+vcpu_id == vcpu silliness Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers and ioctls. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
#
fd04edc3 |
|
16-Feb-2022 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Convert vgic_irq away from VCPU_ID Convert vgic_irq to use vm_create_with_one_vcpu() and pass around a 'struct kvm_vcpu' object instead of passing around a vCPU ID (which is always the global VCPU_ID...). Opportunstically align the indentation for multiple functions' parameters. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
#
f17cf567 |
|
04-May-2022 |
Sean Christopherson <seanjc@google.com> |
KVM: selftests: Use __KVM_SYSCALL_ERROR() to handle non-KVM syscall errors Use __KVM_SYSCALL_ERROR() to report and pretty print non-KVM syscall and ioctl errors, e.g. for mmap(), munmap(), uffd ioctls, etc... Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
#
a5cd38fd |
|
26-Jan-2022 |
Ricardo Koller <ricarkol@google.com> |
kvm: selftests: aarch64: fix some vgic related comments Fix the formatting of some comments and the wording of one of them (in gicv3_access_reg). Signed-off-by: Ricardo Koller <ricarkol@google.com> Reported-by: Reiji Watanabe <reijiw@google.com> Cc: Andrew Jones <drjones@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220127030858.3269036-5-ricarkol@google.com
|
#
5b789864 |
|
26-Jan-2022 |
Ricardo Koller <ricarkol@google.com> |
kvm: selftests: aarch64: fix the failure check in kvm_set_gsi_routing_irqchip_check kvm_set_gsi_routing_irqchip_check(expect_failure=true) is used to check the error code returned by the kernel when trying to setup an invalid gsi routing table. The ioctl fails if "pin >= KVM_IRQCHIP_NUM_PINS", so kvm_set_gsi_routing_irqchip_check() should test the error only when "intid >= KVM_IRQCHIP_NUM_PINS+32". The issue is that the test check is "intid >= KVM_IRQCHIP_NUM_PINS", so for a case like "intid = KVM_IRQCHIP_NUM_PINS" the test wrongly assumes that the kernel will return an error. Fix this by using the right check. Signed-off-by: Ricardo Koller <ricarkol@google.com> Reported-by: Reiji Watanabe <reijiw@google.com> Cc: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220127030858.3269036-4-ricarkol@google.com
|
#
11024a7a |
|
26-Jan-2022 |
Ricardo Koller <ricarkol@google.com> |
kvm: selftests: aarch64: pass vgic_irq guest args as a pointer The guest in vgic_irq gets its arguments in a struct. This struct used to fit nicely in a single register so vcpu_args_set() was able to pass it by value by setting x0 with it. Unfortunately, this args struct grew after some commits and some guest args became random (specically kvm_supports_irqfd). Fix this by passing the guest args as a pointer (after allocating some guest memory for it). Signed-off-by: Ricardo Koller <ricarkol@google.com> Reported-by: Reiji Watanabe <reijiw@google.com> Cc: Andrew Jones <drjones@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220127030858.3269036-3-ricarkol@google.com
|
#
456f89e0 |
|
23-Feb-2022 |
Mark Brown <broonie@kernel.org> |
KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3 The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220223131624.1830351-1-broonie@kernel.org
|
#
728fcc46 |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add test for restoring active IRQs Add a test that restores multiple IRQs in active state, it does it by writing into ISACTIVER from the guest and using KVM ioctls. This test tries to emulate what would happen during a live migration: restore active IRQs. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-18-ricarkol@google.com
|
#
bebd8f3f |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq Add injection tests that use writing into the ISPENDR register (to mark IRQs as pending). This is typically used by migration code. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-17-ricarkol@google.com
|
#
6a5a4718 |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq Add injection tests for the KVM_IRQFD ioctl into vgic_irq. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-16-ricarkol@google.com
|
#
90f50aca |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq Add tests for failed injections to vgic_irq. This tests that KVM can handle bogus IRQ numbers. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-14-ricarkol@google.com
|
#
6830fa91 |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq Add injection tests for the LEVEL_INFO ioctl (level-sensitive specific) into vgic_irq. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-13-ricarkol@google.com
|
#
92f2cc4a |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq Add a cmdline arg for using level-sensitive interrupts (vs the default edge-triggered). Then move the handler into a generic handler function that takes the type of interrupt (level vs. edge) as an arg. When handling line-sensitive interrupts it sets the line to low after acknowledging the IRQ. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-12-ricarkol@google.com
|
#
0ad3ff4a |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add preemption tests in vgic_irq Add tests for IRQ preemption (having more than one activated IRQ at the same time). This test injects multiple concurrent IRQs and handles them without handling the actual exceptions. This is done by masking interrupts for the whole test. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-11-ricarkol@google.com
|
#
8a35b287 |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq Add a new cmdline arg to set the EOI mode for all vgic_irq tests. This specifies whether a write to EOIR will deactivate IRQs or not. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-10-ricarkol@google.com
|
#
e5410ee2 |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test Add the ability to specify the number of vIRQs exposed by KVM (arg defaults to 64). Then extend the KVM_IRQ_LINE test by injecting all available SPIs at once (specified by the nr-irqs arg). As a bonus, inject all SGIs at once as well. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-9-ricarkol@google.com
|
#
e1cb399e |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq Build an abstraction around the injection functions, so the preparation and checking around the actual injection can be shared between tests. All functions are stored as pointers in arrays of kvm_inject_desc's which include the pointer and what kind of interrupts they can inject. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-8-ricarkol@google.com
|
#
50b020cd |
|
08-Nov-2021 |
Ricardo Koller <ricarkol@google.com> |
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection Add a new KVM selftest, vgic_irq, for testing userspace IRQ injection. This particular test injects an SPI using KVM_IRQ_LINE on GICv3 and verifies that the IRQ is handled in the guest. The next commits will add more types of IRQs and different modes. Signed-off-by: Ricardo Koller <ricarkol@google.com> Acked-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211109023906.1091208-7-ricarkol@google.com
|