#
a182e641 |
|
23-Aug-2023 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: add uprobe_multi test binary to .gitignore It seems like it was forgotten to add uprobe_multi binary to .gitignore. Fix this trivial omission. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230824000016.2658017-1-andrii@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
#
a5d0c26a |
|
27-Jul-2023 |
Yonghong Song <yonghong.song@linux.dev> |
selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing Similar to no-alu32 runner, if clang compiler supports -mcpu=v4, a cpuv4 runner is created to test bpf programs compiled with -mcpu=v4. The following are some num-of-insn statistics for each newer instructions based on existing selftests, excluding subsequent cpuv4 insn specific tests. insn pattern # of instructions reg = (s8)reg 4 reg = (s16)reg 4 reg = (s32)reg 144 reg = *(s8 *)(reg + off) 13 reg = *(s16 *)(reg + off) 14 reg = *(s32 *)(reg + off) 15215 reg = bswap16 reg 142 reg = bswap32 reg 38 reg = bswap64 reg 14 reg s/= reg 0 reg s%= reg 0 gotol <offset> 58 Note that in llvm -mcpu=v4 implementation, the compiler is a little bit conservative about generating 'gotol' insn (32-bit branch offset) as it didn't precise count the number of insns (e.g., some insns are debug insns, etc.). Compared to old 'goto' insn, newer 'gotol' insn should have comparable verification states to 'goto' insn. With current patch set, all selftests passed with -mcpu=v4 when running test_progs-cpuv4 binary. The -mcpu=v3 and -mcpu=v2 run are also successful. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230728011250.3718252-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
4dba3e78 |
|
01-Feb-2023 |
Lorenzo Bianconi <lorenzo@kernel.org> |
selftests/bpf: introduce XDP compliance test tool Introduce xdp_features tool in order to test XDP features supported by the NIC and match them against advertised ones. In order to test supported/advertised XDP features, xdp_features must run on the Device Under Test (DUT) and on a Tester device. xdp_features opens a control TCP channel between DUT and Tester devices to send control commands from Tester to the DUT and a UDP data channel where the Tester sends UDP 'echo' packets and the DUT is expected to reply back with the same packet. DUT installs multiple XDP programs on the NIC to test XDP capabilities and reports back to the Tester some XDP stats. Currently xdp_features supports the following XDP features: - XDP_DROP - XDP_ABORTED - XDP_PASS - XDP_TX - XDP_REDIRECT - XDP_NDO_XMIT Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/7c1af8e7e6ef0614cf32fa9e6bdaa2d8d605f859.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
297a3f12 |
|
19-Jan-2023 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: Simple program to dump XDP RX metadata To be used for verification of driver implementations. Note that the skb path is gone from the series, but I'm still keeping the implementation for any possible future work. $ xdp_hw_metadata <ifname> On the other machine: $ echo -n xdp | nc -u -q1 <target> 9091 # for AF_XDP $ echo -n skb | nc -u -q1 <target> 9092 # for skb Sample output: # xdp xsk_ring_cons__peek: 1 0x19f9090: rx_desc[0]->addr=100000000008000 addr=8100 comp_addr=8000 rx_timestamp_supported: 1 rx_timestamp: 1667850075063948829 0x19f9090: complete idx=8 addr=8000 # skb found skb hwtstamp = 1668314052.854274681 Decoding: # xdp rx_timestamp=1667850075.063948829 $ date -d @1667850075 Mon Nov 7 11:41:15 AM PST 2022 $ date Mon Nov 7 11:42:05 AM PST 2022 # skb $ date -d @1668314052 Sat Nov 12 08:34:12 PM PST 2022 $ date Sat Nov 12 08:37:06 PM PST 2022 Cc: John Fastabend <john.fastabend@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Willem de Bruijn <willemb@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Anatoly Burakov <anatoly.burakov@intel.com> Cc: Alexander Lobakin <alexandr.lobakin@intel.com> Cc: Magnus Karlsson <magnus.karlsson@gmail.com> Cc: Maryam Tahhan <mtahhan@redhat.com> Cc: xdp-hints@xdp-project.net Cc: netdev@vger.kernel.org Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20230119221536.3349901-18-sdf@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
#
fcbb408a |
|
22-Dec-2022 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: Add host-tools to gitignore Shows up when cross-compiling: HOST_SCRATCH_DIR := $(OUTPUT)/host-tools vs SCRATCH_DIR := $(OUTPUT)/tools HOST_SCRATCH_DIR := $(SCRATCH_DIR) Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221222213958.2302320-1-sdf@google.com
|
#
067f4f29 |
|
23-Sep-2022 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: add sign-file to .gitignore Add sign-file to .gitignore to avoid accidentally checking it in. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20220923175913.3272430-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
c8bc5e05 |
|
09-Sep-2022 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: Add veristat tool for mass-verifying BPF object files Add a small tool, veristat, that allows mass-verification of a set of *libbpf-compatible* BPF ELF object files. For each such object file, veristat will attempt to verify each BPF program *individually*. Regardless of success or failure, it parses BPF verifier stats and outputs them in human-readable table format. In the future we can also add CSV and JSON output for more scriptable post-processing, if necessary. veristat allows to specify a set of stats that should be output and ordering between multiple objects and files (e.g., so that one can easily order by total instructions processed, instead of default file name, prog name, verdict, total instructions order). This tool should be useful for validating various BPF verifier changes or even validating different kernel versions for regressions. Here's an example for some of the heaviest selftests/bpf BPF object files: $ sudo ./veristat -s insns,file,prog {pyperf,loop,test_verif_scale,strobemeta,test_cls_redirect,profiler}*.linked3.o File Program Verdict Duration, us Total insns Total states Peak states ------------------------------------ ------------------------------------ ------- ------------ ----------- ------------ ----------- loop3.linked3.o while_true failure 350990 1000001 9663 9663 test_verif_scale3.linked3.o balancer_ingress success 115244 845499 8636 2141 test_verif_scale2.linked3.o balancer_ingress success 77688 773445 3048 788 pyperf600.linked3.o on_event success 2079872 624585 30335 30241 pyperf600_nounroll.linked3.o on_event success 353972 568128 37101 2115 strobemeta.linked3.o on_event success 455230 557149 15915 13537 test_verif_scale1.linked3.o balancer_ingress success 89880 554754 8636 2141 strobemeta_nounroll2.linked3.o on_event success 433906 501725 17087 1912 loop6.linked3.o trace_virtqueue_add_sgs success 282205 398057 8717 919 loop1.linked3.o nested_loops success 125630 361349 5504 5504 pyperf180.linked3.o on_event success 2511740 160398 11470 11446 pyperf100.linked3.o on_event success 744329 87681 6213 6191 test_cls_redirect.linked3.o cls_redirect success 54087 78925 4782 903 strobemeta_subprogs.linked3.o on_event success 57898 65420 1954 403 test_cls_redirect_subprogs.linked3.o cls_redirect success 54522 64965 4619 958 strobemeta_nounroll1.linked3.o on_event success 43313 57240 1757 382 pyperf50.linked3.o on_event success 194355 46378 3263 3241 profiler2.linked3.o tracepoint__syscalls__sys_enter_kill success 23869 43372 1423 542 pyperf_subprogs.linked3.o on_event success 29179 36358 2499 2499 profiler1.linked3.o tracepoint__syscalls__sys_enter_kill success 13052 27036 1946 936 profiler3.linked3.o tracepoint__syscalls__sys_enter_kill success 21023 26016 2186 915 profiler2.linked3.o kprobe__vfs_link success 5255 13896 303 271 profiler1.linked3.o kprobe__vfs_link success 7792 12687 1042 1041 profiler3.linked3.o kprobe__vfs_link success 7332 10601 865 865 profiler2.linked3.o kprobe_ret__do_filp_open success 3417 8900 216 199 profiler2.linked3.o kprobe__vfs_symlink success 3548 8775 203 186 pyperf_global.linked3.o on_event success 10007 7563 520 520 profiler3.linked3.o kprobe_ret__do_filp_open success 4708 6464 532 532 profiler1.linked3.o kprobe_ret__do_filp_open success 3090 6445 508 508 profiler3.linked3.o kprobe__vfs_symlink success 4477 6358 521 521 profiler1.linked3.o kprobe__vfs_symlink success 3381 6347 507 507 profiler2.linked3.o raw_tracepoint__sched_process_exec success 2464 5874 292 189 profiler3.linked3.o raw_tracepoint__sched_process_exec success 2677 4363 397 283 profiler2.linked3.o kprobe__proc_sys_write success 1800 4355 143 138 profiler1.linked3.o raw_tracepoint__sched_process_exec success 1649 4019 333 240 pyperf600_bpf_loop.linked3.o on_event success 2711 3966 306 306 profiler2.linked3.o raw_tracepoint__sched_process_exit success 1234 3138 83 66 profiler3.linked3.o kprobe__proc_sys_write success 1755 2623 223 223 profiler1.linked3.o kprobe__proc_sys_write success 1222 2456 193 193 loop2.linked3.o while_true success 608 1783 57 30 profiler3.linked3.o raw_tracepoint__sched_process_exit success 789 1680 146 146 profiler1.linked3.o raw_tracepoint__sched_process_exit success 592 1526 133 133 strobemeta_bpf_loop.linked3.o on_event success 1015 1512 106 106 loop4.linked3.o combinations success 165 524 18 17 profiler3.linked3.o raw_tracepoint__sched_process_fork success 196 299 25 25 profiler1.linked3.o raw_tracepoint__sched_process_fork success 109 265 19 19 profiler2.linked3.o raw_tracepoint__sched_process_fork success 111 265 19 19 loop5.linked3.o while_true success 47 84 9 9 ------------------------------------ ------------------------------------ ------- ------------ ----------- ------------ ----------- Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220909193053.577111-4-andrii@kernel.org
|
#
018a8e75 |
|
07-Jul-2022 |
Maciej Fijalkowski <maciej.fijalkowski@intel.com> |
selftests, xsk: Rename AF_XDP testing app Recently, xsk part of libbpf was moved to selftests/bpf directory and lives on its own because there is an AF_XDP testing application that needs it called xdpxceiver. That name makes it a bit hard to indicate who maintains it as there are other XDP samples in there, whereas this one is strictly about AF_XDP. Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who maintains it. A follow-up patch will correct MAINTAINERS file. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com
|
#
fb5cd0ce |
|
15-Jun-2022 |
Maxim Mikityanskiy <maximmi@nvidia.com> |
selftests/bpf: Add selftests for raw syncookie helpers This commit adds selftests for the new BPF helpers: bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6}. xdp_synproxy_kern.c is a BPF program that generates SYN cookies on allowed TCP ports and sends SYNACKs to clients, accelerating synproxy iptables module. xdp_synproxy.c is a userspace control application that allows to configure the following options in runtime: list of allowed ports, MSS, window scale, TTL. A selftest is added to prog_tests that leverages the above programs to test the functionality of the new helpers. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220615134847.3753567-5-maximmi@nvidia.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
3cccbaa0 |
|
16-Mar-2022 |
Delyan Kratunov <delyank@fb.com> |
selftests/bpf: Test subskeleton functionality This patch changes the selftests/bpf Makefile to also generate a subskel.h for every skel.h it would have normally generated. Separately, it also introduces a new subskeleton test which tests library objects, externs, weak symbols, kconfigs, and user maps. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1bd24956940bbbfe169bb34f7f87b11df52ef011.1647473511.git.delyank@fb.com
|
#
b03e1946 |
|
19-Feb-2022 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: Fix btfgen tests There turned out to be a few problems with btfgen selftests. First, core_btfgen tests are failing in BPF CI due to the use of full-featured bpftool, which has extra dependencies on libbfd, libcap, etc, which are present in BPF CI's build environment, but those shared libraries are missing in QEMU image in which test_progs is running. To fix this problem, use minimal bootstrap version of bpftool instead. It only depend on libelf and libz, same as libbpf, so doesn't add any new requirements (and bootstrap bpftool still implementes entire `bpftool gen` functionality, which is quite convenient). Second problem is even more interesting. Both core_btfgen and core_reloc reuse the same set of struct core_reloc_test_case array of test case definitions. That in itself is not a problem, but btfgen test replaces test_case->btf_src_file property with the path to temporary file into which minimized BTF is output by bpftool. This interferes with original core_reloc tests, depending on order of tests execution (core_btfgen is run first in sequential mode and skrews up subsequent core_reloc run by pointing to already deleted temporary file, instead of the original BTF files) and whether those two runs share the same process (in parallel mode the chances are high for them to run in two separate processes and so not interfere with each other). To prevent this interference, create and use local copy of a test definition. Mark original array as constant to catch accidental modifcations. Note that setup_type_id_case_success() and setup_type_id_case_success() still modify common test_case->output memory area, but it is ok as each setup function has to re-initialize it completely anyways. In sequential mode it leads to deterministic and correct initialization. In parallel mode they will either each have their own process, or if core_reloc and core_btfgen happen to be run by the same worker process, they will still do that sequentially within the worker process. If they are sharded across multiple processes, they don't really share anything anyways. Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just a "flavor" of core_reloc test, not an independent set of tests. So make it more obvious. Last problem that needed solving was that location of bpftool differs between test_progs and test_progs' flavors (e.g., test_progs-no_alu32). To keep it simple, create a symlink to bpftool both inside selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That way, from inside core_reloc test, location to bpftool is just "./bpftool". v2->v3: - fix bpftool location relative the test_progs-no_alu32; v1->v2: - fix corruption of core_reloc_test_case. Fixes: 704c91e59fe0 ("selftests/bpf: Test "bpftool gen min_core_btf") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yucong Sun <sunyucong@gmail.com> Link: https://lore.kernel.org/bpf/20220220042720.3336684-1-andrii@kernel.org
|
#
8987ede3 |
|
14-Sep-2021 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: Fix .gitignore to not ignore test_progs.c List all possible test_progs flavors explicitly to avoid accidentally ignoring valid source code files. In this case, test_progs.c was still ignored after recent 809ed84de8b3 ("selftests/bpf: Whitelist test_progs.h from .gitignore") fix that added exception only for test_progs.h. Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210914162228.3995740-1-andrii@kernel.org
|
#
372642ea |
|
04-Aug-2021 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: Move netcnt test under test_progs Rewrite to skel and ASSERT macros as well while we are at it. v3: - replace -f with -A to make it work with busybox ping. -A is available on both busybox and iputils, from the man page: On networks with low RTT this mode is essentially equivalent to flood mode. v2: - don't check result of bpf_map__fd (Yonghong Song) - remove from .gitignore (Andrii Nakryiko) - move ping_command into network_helpers (Andrii Nakryiko) - remove assert() (Andrii Nakryiko) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210804205524.3748709-1-sdf@google.com
|
#
809ed84d |
|
16-Jun-2021 |
Daniel Xu <dxu@dxuuu.xyz> |
selftests/bpf: Whitelist test_progs.h from .gitignore Somehow test_progs.h was being included by the existing rule: /test_progs* This is bad because: 1) test_progs.h is a checked in file 2) grep-like tools like ripgrep[0] respect gitignore and test_progs.h was being hidden from searches [0]: https://github.com/BurntSushi/ripgrep Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/a46f64944bf678bc652410ca6028d3450f4f7f4b.1623880296.git.dxu@dxuuu.xyz
|
#
380afe72 |
|
07-Jun-2021 |
Joe Stringer <joe@cilium.io> |
selftests, bpf: Make docs tests fail more reliably Previously, if rst2man caught errors, then these would be ignored and the output file would be written anyway. This would allow developers to introduce regressions in the docs comments in the BPF headers. Additionally, even if you instruct rst2man to fail out, it will still write out to the destination target file, so if you ran the tests twice in a row it would always pass. Use a temporary file for the initial run to ensure that if rst2man fails out under "--strict" mode, subsequent runs will not automatically pass. Tested via ./tools/testing/selftests/bpf/test_doc_build.sh Signed-off-by: Joe Stringer <joe@cilium.io> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210608015756.340385-1-joe@cilium.io
|
#
56b8b7f9 |
|
02-Jun-2021 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: Add xdp_redirect_multi into .gitignore When xdp_redirect_multi test binary was added recently, it wasn't added to .gitignore. Fix that. Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210603004026.2698513-5-andrii@kernel.org
|
#
4d1b6298 |
|
13-May-2021 |
Alexei Starovoitov <ast@kernel.org> |
selftests/bpf: Convert few tests to light skeleton. Convert few tests that don't use CO-RE to light skeleton. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210514003623.28033-19-alexei.starovoitov@gmail.com
|
#
accbd33a |
|
02-Mar-2021 |
Joe Stringer <joe@cilium.io> |
selftests/bpf: Test syscall command parsing Add building of the bpf(2) syscall commands documentation as part of the docs building step in the build. This allows us to pick up on potential parse errors from the docs generator script as part of selftests. The generated manual pages here are not intended for distribution, they are just a fragment that can be integrated into the other static text of bpf(2) to form the full manual page. Signed-off-by: Joe Stringer <joe@cilium.io> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210302171947.2268128-14-joe@cilium.io
|
#
a01d935b |
|
02-Mar-2021 |
Joe Stringer <joe@cilium.io> |
tools/bpf: Remove bpf-helpers from bpftool docs This logic is used for validating the manual pages from selftests, so move the infra under tools/testing/selftests/bpf/ and rely on selftests for validation rather than tying it into the bpftool build. Signed-off-by: Joe Stringer <joe@cilium.io> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20210302171947.2268128-12-joe@cilium.io
|
#
61f8c9c8 |
|
09-Feb-2021 |
Florent Revest <revest@chromium.org> |
selftests/bpf: Integrate the socket_cookie test to test_progs Currently, the selftest for the BPF socket_cookie helpers is built and run independently from test_progs. It's easy to forget and hard to maintain. This patch moves the socket cookies test into prog_tests/ and vastly simplifies its logic by: - rewriting the loading code with BPF skeletons - rewriting the server/client code with network helpers - rewriting the cgroup code with test__join_cgroup - rewriting the error handling code with CHECKs Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210111406.785541-3-revest@chromium.org
|
#
09c02d55 |
|
14-Jan-2021 |
Carlos Neira <cneirabustos@gmail.com> |
bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs. Currently tests for bpf_get_ns_current_pid_tgid() are outside test_progs. This change folds test cases into test_progs. Changes from v11: - Fixed test failure is not detected. - Removed EXIT(3) call as it will stop test_progs execution. Signed-off-by: Carlos Neira <cneirabustos@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210114141033.GA17348@localhost Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
7535a352 |
|
10-Dec-2020 |
Weqaar Janjua <weqaar.janjua@gmail.com> |
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore This patch adds *xdpxceiver* to selftests/bpf/.gitignore Reported-by: Yonghong Song <yhs@fb.com> Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201210115435.3995-1-weqaar.a.janjua@intel.com
|
#
9f7fa225 |
|
03-Dec-2020 |
Andrii Nakryiko <andrii@kernel.org> |
selftests/bpf: Add bpf_testmod kernel module for testing Add bpf_testmod module, which is conceptually out-of-tree module and provides ways for selftests/bpf to test various kernel module-related functionality: raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by test_progs test runner and expected by some of selftests to be present and loaded. Pahole currently isn't able to generate BTF for static functions in kernel modules, so make sure traced function is global. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org
|
#
aaf376bd |
|
03-Nov-2020 |
Alexander Duyck <alexanderduyck@fb.com> |
selftests/bpf: Move test_tcppbf_user into test_progs Recently a bug was missed due to the fact that test_tcpbpf_user is not a part of test_progs. In order to prevent similar issues in the future move the test functionality into test_progs. By doing this we can make certain that it is a part of standard testing and will not be overlooked. As a part of moving the functionality into test_progs it is necessary to integrate with the test_progs framework and to drop any redundant code. This patch: 1. Cleans up the include headers 2. Dropped a duplicate definition of bpf_find_map 3. Switched over to using test_progs specific cgroup functions 4. Renamed main to test_tcpbpf_user 5. Dropped return value in favor of CHECK_FAIL to check for errors The general idea is that I wanted to keep the changes as small as possible while moving the file into the test_progs framework. The follow-on patches are meant to clean up the remaining issues such as the use of CHECK_FAIL. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/160443928881.1086697.17661359319919165370.stgit@localhost.localdomain
|
#
6f521a2b |
|
24-Sep-2020 |
Martin KaFai Lau <kafai@fb.com> |
bpf: selftest: Move sock_fields test into test_progs This is a mechanical change to 1. move test_sock_fields.c to prog_tests/sock_fields.c 2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c Minimal change is made to the code itself. Next patch will make changes to use new ways of writing test, e.g. use skel and global variables. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200925000427.3857814-1-kafai@fb.com
|
#
c64779e2 |
|
15-Sep-2020 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Merge most of test_btf into test_progs Merge 183 tests from test_btf into test_progs framework to be exercised regularly. All the test_btf tests that were moved are modeled as proper sub-tests in test_progs framework for ease of debugging and reporting. No functional or behavioral changes were intended, I tried to preserve original behavior as much as possible. E.g., `test_progs -v` will activate "always_log" flag to emit BTF validation log. The only difference is in reducing the max_entries limit for pretty-printing tests from (128 * 1024) to just 128 to reduce tests running time without reducing the coverage. Example test run: $ sudo ./test_progs -n 8 ... #8 btf:OK Summary: 1/183 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200916004819.3767489-1-andriin@fb.com
|
#
5597432d |
|
19-Aug-2020 |
Veronika Kabatova <vkabatov@redhat.com> |
selftests/bpf: Remove test_align leftovers Calling generic selftests "make install" fails as rsync expects all files from TEST_GEN_PROGS to be present. The binary is not generated anymore (commit 3b09d27cc93d) so we can safely remove it from there and also from gitignore. Fixes: 3b09d27cc93d ("selftests/bpf: Move test_align under test_progs") Signed-off-by: Veronika Kabatova <vkabatov@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20200819160710.1345956-1-vkabatov@redhat.com
|
#
8e7c2a02 |
|
12-May-2020 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Add benchmark runner infrastructure While working on BPF ringbuf implementation, testing, and benchmarking, I've developed a pretty generic and modular benchmark runner, which seems to be generically useful, as I've already used it for one more purpose (testing fastest way to trigger BPF program, to minimize overhead of in-kernel code). This patch adds generic part of benchmark runner and sets up Makefile for extending it with more sets of benchmarks. Benchmarker itself operates by spinning up specified number of producer and consumer threads, setting up interval timer sending SIGALARM signal to application once a second. Every second, current snapshot with hits/drops counters are collected and stored in an array. Drops are useful for producer/consumer benchmarks in which producer might overwhelm consumers. Once test finishes after given amount of warm-up and testing seconds, mean and stddev are calculated (ignoring warm-up results) and is printed out to stdout. This setup seems to give consistent and accurate results. To validate behavior, I added two atomic counting tests: global and local. For global one, all the producer threads are atomically incrementing same counter as fast as possible. This, of course, leads to huge drop of performance once there is more than one producer thread due to CPUs fighting for the same memory location. Local counting, on the other hand, maintains one counter per each producer thread, incremented independently. Once per second, all counters are read and added together to form final "counting throughput" measurement. As expected, such setup demonstrates linear scalability with number of producers (as long as there are enough physical CPU cores, of course). See example output below. Also, this setup can nicely demonstrate disastrous effects of false sharing, if care is not taken to take those per-producer counters apart into independent cache lines. Demo output shows global counter first with 1 producer, then with 4. Both total and per-producer performance significantly drop. The last run is local counter with 4 producers, demonstrating near-perfect scalability. $ ./bench -a -w1 -d2 -p1 count-global Setting up benchmark 'count-global'... Benchmark 'count-global' started. Iter 0 ( 24.822us): hits 148.179M/s (148.179M/prod), drops 0.000M/s Iter 1 ( 37.939us): hits 149.308M/s (149.308M/prod), drops 0.000M/s Iter 2 (-10.774us): hits 150.717M/s (150.717M/prod), drops 0.000M/s Iter 3 ( 3.807us): hits 151.435M/s (151.435M/prod), drops 0.000M/s Summary: hits 150.488 ± 1.079M/s (150.488M/prod), drops 0.000 ± 0.000M/s $ ./bench -a -w1 -d2 -p4 count-global Setting up benchmark 'count-global'... Benchmark 'count-global' started. Iter 0 ( 60.659us): hits 53.910M/s ( 13.477M/prod), drops 0.000M/s Iter 1 (-17.658us): hits 53.722M/s ( 13.431M/prod), drops 0.000M/s Iter 2 ( 5.865us): hits 53.495M/s ( 13.374M/prod), drops 0.000M/s Iter 3 ( 0.104us): hits 53.606M/s ( 13.402M/prod), drops 0.000M/s Summary: hits 53.608 ± 0.113M/s ( 13.402M/prod), drops 0.000 ± 0.000M/s $ ./bench -a -w1 -d2 -p4 count-local Setting up benchmark 'count-local'... Benchmark 'count-local' started. Iter 0 ( 23.388us): hits 640.450M/s (160.113M/prod), drops 0.000M/s Iter 1 ( 2.291us): hits 605.661M/s (151.415M/prod), drops 0.000M/s Iter 2 ( -6.415us): hits 607.092M/s (151.773M/prod), drops 0.000M/s Iter 3 ( -1.361us): hits 601.796M/s (150.449M/prod), drops 0.000M/s Summary: hits 604.849 ± 2.739M/s (151.212M/prod), drops 0.000 ± 0.000M/s Benchmark runner supports setting thread affinity for producer and consumer threads. You can use -a flag for default CPU selection scheme, where first consumer gets CPU #0, next one gets CPU #1, and so on. Then producer threads pick up next CPU and increment one-by-one as well. But user can also specify a set of CPUs independently for producers and consumers with --prod-affinity 1,2-10,15 and --cons-affinity <set-of-cpus>. The latter allows to force producers and consumers to share same set of CPUs, if necessary. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200512192445.2351848-3-andriin@fb.com
|
#
e4e8f4d0 |
|
28-Apr-2020 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Add runqslower binary to .gitignore With recent changes, runqslower is being copied into selftests/bpf root directory. So add it into .gitignore. Fixes: b26d1e2b6028 ("selftests/bpf: Copy runqslower to OUTPUT directory") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Veronika Kabatova <vkabatov@redhat.com> Link: https://lore.kernel.org/bpf/20200429012111.277390-12-andriin@fb.com
|
#
42fce2cf |
|
28-Apr-2020 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Convert test_hashmap into test_progs test Fold stand-alone test_hashmap test into test_progs. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200429012111.277390-4-andriin@fb.com
|
#
d198b34f |
|
03-Mar-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
.gitignore: add SPDX License Identifier Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
1c1052e0 |
|
04-Mar-2020 |
Carlos Neira <cneirabustos@gmail.com> |
tools/testing/selftests/bpf: Add self-tests for new helper bpf_get_ns_current_pid_tgid. Self tests added for new helper bpf_get_ns_current_pid_tgid Signed-off-by: Carlos Neira <cneirabustos@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200304204157.58695-4-cneirabustos@gmail.com
|
#
a2c9652f |
|
20-Jan-2020 |
Toke Høiland-Jørgensen <toke@redhat.com> |
selftests: Refactor build to remove tools/lib/bpf from include path To make sure no new files are introduced that doesn't include the bpf/ prefix in its #include, remove tools/lib/bpf from the include path entirely. Instead, we introduce a new header files directory under the scratch tools/ dir, and add a rule to run the 'install_headers' rule from libbpf to have a full set of consistent libbpf headers in $(OUTPUT)/tools/include/bpf, and then use $(OUTPUT)/tools/include as the include path for selftests. For consistency we also make sure we put all the scratch build files from other bpftool and libbpf into tools/build/, so everything stays within selftests/. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/157952561246.1683545.2762245552022369203.stgit@toke.dk
|
#
965b9fee |
|
09-Jan-2020 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Further clean up Makefile output Further clean up Makefile output: - hide "entering directory" messages; - silvence sub-Make command echoing; - succinct MKDIR messages. Also remove few test binaries that are not produced anymore from .gitignore. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200110051716.1591485-4-andriin@fb.com
|
#
fa633a0f |
|
22-Dec-2019 |
Namhyung Kim <namhyung@kernel.org> |
libbpf: Fix build on read-only filesystems I got the following error when I tried to build perf on a read-only filesystem with O=dir option. $ cd /some/where/ro/linux/tools/perf $ make O=$HOME/build/perf ... CC /home/namhyung/build/perf/lib.o /bin/sh: bpf_helper_defs.h: Read-only file system make[3]: *** [Makefile:184: bpf_helper_defs.h] Error 1 make[2]: *** [Makefile.perf:778: /home/namhyung/build/perf/libbpf.a] Error 2 make[2]: *** Waiting for unfinished jobs.... LD /home/namhyung/build/perf/libperf-in.o AR /home/namhyung/build/perf/libperf.a PERF_VERSION = 5.4.0 make[1]: *** [Makefile.perf:225: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 It was becaused bpf_helper_defs.h was generated in current directory. Move it to OUTPUT directory. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191223061326.843366-1-namhyung@kernel.org
|
#
257c8855 |
|
19-Dec-2019 |
Andrey Ignatov <rdna@fb.com> |
selftests/bpf: Convert test_cgroup_attach to prog_tests Convert test_cgroup_attach to prog_tests. This change does a lot of things but in many cases it's pretty expensive to separate them, so they go in one commit. Nevertheless the logic is ketp as is and changes made are just moving things around, simplifying them (w/o changing the meaning of the tests) and making prog_tests compatible: * split the 3 tests in the file into 3 separate files in prog_tests/; * rename the test functions to test_<file_base_name>; * remove unused includes, constants, variables and functions from every test; * replace `if`-s with or `if (CHECK())` where additional context should be logged and with `if (CHECK_FAIL())` where line number is enough; * switch from `log_err()` to logging via `CHECK()`; * replace `assert`-s with `CHECK_FAIL()` to avoid crashing the whole test_progs if one assertion fails; * replace cgroup_helpers with test__join_cgroup() in cgroup_attach_override only, other tests need more fine-grained control for cgroup creation/deletion so cgroup_helpers are still used there; * simplify cgroup_attach_autodetach by switching to easiest possible program since this test doesn't really need such a complicated program as cgroup_attach_multi does; * remove test_cgroup_attach.c itself. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/0ff19cc64d2dc5cf404349f07131119480e10e32.1576741281.git.rdna@fb.com
|
#
f3c926a4 |
|
13-Dec-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Add BPF skeletons selftests and convert attach_probe.c Add BPF skeleton generation to selftest/bpf's Makefile. Convert attach_probe.c to use skeleton. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191214014341.3442258-15-andriin@fb.com
|
#
6bf6affe |
|
02-Dec-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: Bring back c++ include/link test Commit 5c26f9a78358 ("libbpf: Don't use cxx to test_libpf target") converted existing c++ test to c. We still want to include and link against libbpf from c++ code, so reinstate this test back, this time in a form of a selftest with a clear comment about its purpose. v2: * -lelf -> $(LDLIBS) (Andrii Nakryiko) Fixes: 5c26f9a78358 ("libbpf: Don't use cxx to test_libpf target") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191202215931.248178-1-sdf@google.com
|
#
027cbaaf |
|
24-Oct-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Fix .gitignore to ignore no_alu32/ When switching to alu32 by default, no_alu32/ subdirectory wasn't added to .gitignore. Fix it. Fixes: e13a2fe642bd ("tools/bpf: Turn on llvm alu32 attribute by default") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20191025045503.3043427-1-andriin@fb.com
|
#
cb79a4e1 |
|
16-Oct-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftest/bpf: Remove test_libbpf.sh and test_libbpf_open test_progs is much more sophisticated superset of tests compared to test_libbpf.sh and test_libbpf_open. Remove test_libbpf.sh and test_libbpf_open. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191016060051.2024182-8-andriin@fb.com
|
#
74b5a596 |
|
16-Oct-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: Replace test_progs and test_maps w/ general rule Define test runner generation meta-rule that codifies dependencies between test runner, its tests, and its dependent BPF programs. Use that for defining test_progs and test_maps test-runners. Also additionally define 2 flavors of test_progs: - alu32, which builds BPF programs with 32-bit registers codegen; - bpf_gcc, which build BPF programs using GCC, if it supports BPF target. Overall, this is accomplished through $(eval)'ing a set of generic rules, which defines Makefile targets dynamically at runtime. See comments explaining the need for 2 $(evals), though. For each test runner we have (test_maps and test_progs, currently), and, optionally, their flavors, the logic of build process is modeled as follows (using test_progs as an example): - all BPF objects are in progs/: - BPF object's .o file is built into output directory from corresponding progs/.c file; - all BPF objects in progs/*.c depend on all progs/*.h headers; - all BPF objects depend on bpf_*.h helpers from libbpf (but not libbpf archive). There is an extra rule to trigger bpf_helper_defs.h (re-)build, if it's not present/outdated); - build recipe for BPF object can be re-defined per test runner/flavor; - test files are built from prog_tests/*.c: - all such test file objects are built on individual file basis; - currently, every single test file depends on all BPF object files; this might be improved in follow up patches to do 1-to-1 dependency, but allowing to customize this per each individual test; - each test runner definition can specify a list of extra .c and .h files to be built along test files and test runner binary; all such headers are becoming automatic dependency of each test .c file; - due to test files sometimes embedding (using .incbin assembly directive) contents of some BPF objects at compilation time, which are expected to be in CWD of compiler, compilation for test file object does cd into test runner's output directory; to support this mode all the include paths are turned into absolute paths using $(abspath) make function; - prog_tests/test.h is automatically (re-)generated with an entry for each .c file in prog_tests/; - final test runner binary is linked together from test object files and extra object files, linking together libbpf's archive as well; - it's possible to specify extra "resource" files/targets, which will be copied into test runner output directory, if it differes from Makefile-wide $(OUTPUT). This is used to ensure btf_dump test cases and urandom_read binary is put into a test runner's CWD for tests to find them in runtime. For flavored test runners, their output directory is a subdirectory of common Makefile-wide $(OUTPUT) directory with flavor name used as subdirectory name. BPF objects targets might be reused between different test runners, so extra checks are employed to not double-define them. Similarly, we have redefinition guards for output directories and test headers. test_verifier follows slightly different patterns and is simple enough to not justify generalizing TEST_RUNNER_DEFINE/TEST_RUNNER_DEFINE_RULES further to accomodate these differences. Instead, rules for test_verifier are minimized and simplified, while preserving correctness of dependencies. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191016060051.2024182-6-andriin@fb.com
|
#
e01a75c1 |
|
08-Oct-2019 |
Andrii Nakryiko <andriin@fb.com> |
libbpf: Move bpf_{helpers, helper_defs, endian, tracing}.h into libbpf Move bpf_helpers.h, bpf_tracing.h, and bpf_endian.h into libbpf. Move bpf_helper_defs.h generation into libbpf's Makefile. Ensure all those headers are installed along the other libbpf headers. Also, adjust selftests and samples include path to include libbpf now. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191008175942.1769476-6-andriin@fb.com
|
#
24f25763 |
|
06-Oct-2019 |
Andrii Nakryiko <andriin@fb.com> |
libbpf: auto-generate list of BPF helper definitions Get rid of list of BPF helpers in bpf_helpers.h (irony...) and auto-generate it into bpf_helpers_defs.h, which is now included from bpf_helpers.h. Suggested-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
1f4f80fe |
|
04-Sep-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: test_progs: convert test_tcp_rtt Move the files, adjust includes, remove entry from Makefile & .gitignore Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
e3e02e1d |
|
04-Sep-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: test_progs: convert test_sockopt_inherit Move the files, adjust includes, remove entry from Makefile & .gitignore I also added pthread_cond_wait for the server thread startup. We don't want to connect to the server that's not yet up (for some reason this existing race is now more prominent with test_progs). Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
3886bd7c |
|
04-Sep-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: test_progs: convert test_sockopt_multi Move the files, adjust includes, remove entry from Makefile & .gitignore Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
9a365e67 |
|
04-Sep-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: test_progs: convert test_sockopt_sk Move the files, adjust includes, remove entry from Makefile & .gitignore Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
4a647421 |
|
04-Sep-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: test_progs: convert test_sockopt Move the files, adjust includes, remove entry from Makefile & .gitignore Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
c3bbf176 |
|
14-Aug-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add sockopt clone/inheritance test Add a test that calls setsockopt on the listener socket which triggers BPF program. This BPF program writes to the sk storage and sets clone flag. Make sure that sk storage is cloned for a newly accepted connection. We have two cloned maps in the tests to make sure we hit both cases in bpf_sk_storage_clone: first element (sk_storage_alloc) and non-first element(s) (selem_link_map). Cc: Martin KaFai Lau <kafai@fb.com> Cc: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
c3ec002e |
|
03-Jul-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add test_tcp_rtt to .gitignore Forgot to add it in the original patch. Fixes: b55873984dab ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
65b4414a |
|
27-Jun-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTI sockopt test that verifies chaining behavior. v9: * setsockopt chaining example v7: * rework the test to verify cgroup getsockopt chaining Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
8a027dc0 |
|
27-Jun-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add sockopt test that exercises sk helpers socktop test that introduces new SOL_CUSTOM sockopt level and stores whatever users sets in sk storage. Whenever getsockopt is called, the original value is retrieved. v9: * SO_SNDBUF example to override user-supplied buffer v7: * use retval=0 and optlen-1 v6: * test 'ret=1' use-case as well (Alexei Starovoitov) v4: * don't call bpf_sk_fullsock helper v3: * drop (__u8 *)(long) casts for optval{,_end} v2: * new test Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
9ec8a4c9 |
|
27-Jun-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add sockopt test Add sockopt selftests: * require proper expected_attach_type * enforce context field read/write access * test bpf_sockopt_handled handler * test EPERM * test limiting optlen from getsockopt * test out-of-bounds access v9: * add tests for setsockopt argument mangling v7: * remove return 2; test retval=0 and optlen=-1 v3: * use DW for optval{,_end} loads v2: * use return code 2 for kernel bypass Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
cd538502 |
|
31-May-2019 |
Alan Maguire <alan.maguire@oracle.com> |
selftests/bpf: measure RTT from xdp using xdping xdping allows us to get latency estimates from XDP. Output looks like this: ./xdping -I eth4 192.168.55.8 Setting up XDP for eth4, please wait... XDP setup disrupts network connectivity, hit Ctrl+C to quit Normal ping RTT data [Ignore final RTT; it is distorted by XDP using the reply] PING 192.168.55.8 (192.168.55.8) from 192.168.55.7 eth4: 56(84) bytes of data. 64 bytes from 192.168.55.8: icmp_seq=1 ttl=64 time=0.302 ms 64 bytes from 192.168.55.8: icmp_seq=2 ttl=64 time=0.208 ms 64 bytes from 192.168.55.8: icmp_seq=3 ttl=64 time=0.163 ms 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.275 ms 4 packets transmitted, 4 received, 0% packet loss, time 3079ms rtt min/avg/max/mdev = 0.163/0.237/0.302/0.054 ms XDP RTT data: 64 bytes from 192.168.55.8: icmp_seq=5 ttl=64 time=0.02808 ms 64 bytes from 192.168.55.8: icmp_seq=6 ttl=64 time=0.02804 ms 64 bytes from 192.168.55.8: icmp_seq=7 ttl=64 time=0.02815 ms 64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.02805 ms The xdping program loads the associated xdping_kern.o BPF program and attaches it to the specified interface. If run in client mode (the default), it will add a map entry keyed by the target IP address; this map will store RTT measurements, current sequence number etc. Finally in client mode the ping command is executed, and the xdping BPF program will use the last ICMP reply, reformulate it as an ICMP request with the next sequence number and XDP_TX it. After the reply to that request is received we can measure RTT and repeat until the desired number of measurements is made. This is why the sequence numbers in the normal ping are 1, 2, 3 and 8. We XDP_TX a modified version of ICMP reply 4 and keep doing this until we get the 4 replies we need; hence the networking stack only sees reply 8, where we have XDP_PASSed it upstream since we are done. In server mode (-s), xdping simply takes ICMP requests and replies to them in XDP rather than passing the request up to the networking stack. No map entry is required. xdping can be run in native XDP mode (the default, or specified via -N) or in skb mode (-S). A test program test_xdping.sh exercises some of these options. Note that native XDP does not seem to XDP_TX for veths, hence -N is not tested. Looking at the code, it looks like XDP_TX is supported so I'm not sure if that's expected. Running xdping in native mode for ixgbe as both client and server works fine. Changes since v4 - close fds on cleanup (Song Liu) Changes since v3 - fixed seq to be __be16 (Song Liu) - fixed fd checks in xdping.c (Song Liu) Changes since v2 - updated commit message to explain why seq number of last ICMP reply is 8 not 4 (Song Liu) - updated types of seq number, raddr and eliminated csum variable in xdpclient/xdpserver functions as it was not needed (Song Liu) - added XDPING_DEFAULT_COUNT definition and usage specification of default/max counts (Song Liu) Changes since v1 - moved from RFC to PATCH - removed unused variable in ipv4_csum() (Song Liu) - refactored ICMP checks into icmp_check() function called by client and server programs and reworked client and server programs due to lack of shared code (Song Liu) - added checks to ensure that SKB and native mode are not requested together (Song Liu) Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
ba0c0cc0 |
|
25-May-2019 |
Roman Gushchin <guro@fb.com> |
selftests/bpf: convert test_cgrp2_attach2 example into kselftest Convert test_cgrp2_attach2 example into a proper test_cgroup_attach kselftest. It's better because we do run kselftest on a constant basis, so there are better chances to spot a potential regression. Also make it slightly less verbose to conform kselftests output style. Output example: $ ./test_cgroup_attach #override:PASS #multi:PASS test_cgroup_attach:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
2d2a3ad8 |
|
24-May-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: add btf_dump BTF-to-C conversion tests Add new test_btf_dump set of tests, validating BTF-to-C conversion correctness. Tests rely on clang to generate BTF from provided C test cases. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
5d04ec68 |
|
24-May-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: add tests for libbpf's hashmap Test all APIs for internal hashmap implementation. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
bca844a8 |
|
16-May-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add test_sysctl and map_tests/tests.h to .gitignore Missing files are: * tools/testing/selftests/bpf/map_tests/tests.h - autogenerated * tools/testing/selftests/bpf/test_sysctl - binary Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Fixes: 1f5fa9ab6e2e ("selftests/bpf: Test BPF_CGROUP_SYSCTL") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
ff1f28c0 |
|
12-May-2019 |
Kelsey Skunberg <skunberg.kelsey@gmail.com> |
selftests: bpf: Add files generated after build to .gitignore The following files are generated after building /selftests/bpf/ and should be added to .gitignore: - libbpf.pc - libbpf.so.* Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
bafc0ba8 |
|
21-Mar-2019 |
Lorenz Bauer <lmb@cloudflare.com> |
selftests/bpf: add tests for bpf_tcp_check_syncookie and bpf_skc_lookup_tcp Add tests which verify that the new helpers work for both IPv4 and IPv6, by forcing SYN cookies to always on. Use a new network namespace to avoid clobbering the global SYN cookie settings. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
8054d51f |
|
28-Feb-2019 |
Andrii Nakryiko <andriin@fb.com> |
selftests/bpf: fix btf_dedup testing code btf_dedup testing code doesn't account for length of struct btf_header when calculating the start of a string section. This patch fixes this problem. Fixes: 49b57e0d01db ("tools/bpf: remove btf__get_strings() superseded by raw data API") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
1727a9dc |
|
10-Feb-2019 |
Jiong Wang <jiong.wang@netronome.com> |
selftests: bpf: add "alu32" to .gitignore "alu32" is a build dir and contains various files for BPF sub-register code-gen testing. This patch tells git to ignore it. Suggested-by: Yonghong Song <yhs@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
e3ca63de |
|
08-Jan-2019 |
Stanislav Fomichev <sdf@google.com> |
selftests/bpf: add missing executables to .gitignore We build test_libbpf with CXX to make sure linking against C++ works. $ make -s -C tools/lib/bpf $ git status -sb ? tools/lib/bpf/test_libbpf $ make -s -C tools/testing/selftests/bpf $ git status -sb ? tools/lib/bpf/test_libbpf ? tools/testing/selftests/bpf/test_libbpf Fixes: 8c4905b995c6 ("libbpf: make sure bpf headers are c++ include-able") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
489c066c |
|
19-Dec-2018 |
Jakub Kicinski <kuba@kernel.org> |
selftests: bpf: add missing executables to .gitignore commit 435f90a338ae ("selftests/bpf: add a test case for sock_ops perf-event notification") missed adding new test to gitignore. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
78de3546 |
|
19-Oct-2018 |
Anders Roxell <anders.roxell@linaro.org> |
selftests/bpf: add missing executables to .gitignore Fixes: 371e4fcc9d96 ("selftests/bpf: cgroup local storage-based network counters") Fixes: 370920c47b26 ("selftests/bpf: Test libbpf_{prog,attach}_type_by_name") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
50b3ed57 |
|
14-Sep-2018 |
Petar Penkov <ppenkov@google.com> |
selftests/bpf: test bpf flow dissection Adds a test that sends different types of packets over multiple tunnels and verifies that valid packets are dissected correctly. To do so, a tc-flower rule is added to drop packets on UDP src port 9, and packets are sent from ports 8, 9, and 10. Only the packets on port 9 should be dropped. Because tc-flower relies on the flow dissector to match flows, correct classification demonstrates correct dissection. Also add support logic to load the BPF program and to inject the test packets. Signed-off-by: Petar Penkov <ppenkov@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
ad1242d8 |
|
03-Sep-2018 |
Mauricio Vasquez B <mauricio.vasquez@polito.it> |
selftests/bpf: add missing executables to .gitignore Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
f269099a |
|
03-Jun-2018 |
Yonghong Song <yhs@fb.com> |
tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper Syscall name_to_handle_at() can be used to get cgroup id for a particular cgroup path in user space. The selftest got cgroup id from both user and kernel, and compare to ensure they are equal to each other. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
#
6bdd533c |
|
26-May-2018 |
Sean Young <sean@mess.org> |
bpf: add selftest for lirc_mode2 type program This is simple test over rc-loopback. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
96112e93 |
|
08-May-2018 |
Sirio Balmelli <sirio@b-ad.ch> |
selftests/bpf: ignore build products Update .gitignore files. Signed-off-by: Sirio Balmelli <sirio@b-ad.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
b6fd9cf7 |
|
23-Apr-2018 |
Anders Roxell <anders.roxell@linaro.org> |
selftests: bpf: update .gitignore with missing file Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
0abf854d |
|
10-Apr-2018 |
Anders Roxell <anders.roxell@linaro.org> |
selftests: bpf: update .gitignore with missing generated files Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
31a8260d |
|
21-Feb-2018 |
Anders Roxell <anders.roxell@linaro.org> |
selftests/bpf: update gitignore with test_libbpf_open bpf builds a test program for loading BPF ELF files. Add the executable to the .gitignore list. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
62a06994 |
|
29-Jan-2018 |
Yonghong Song <yhs@fb.com> |
tools/bpf: permit selftests/bpf to be built in a different directory Fix a couple of issues at tools/testing/selftests/bpf/Makefile so the following command make -C tools/testing/selftests/bpf OUTPUT=/home/yhs/tmp can put the built results into a different directory. Also add the built binary test_tcpbpf_user in the .gitignore file. Fixes: 6882804c916b ("selftests/bpf: add a test for overlapping packet range checks") Fixes: 9d1f15941967 ("bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
b7bcc0bb |
|
18-Jan-2018 |
Shuah Khan <shuah@kernel.org> |
selftests: bpf: update .gitignore with missing generated files Update .gitignore with missing generated files. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
#
bc6a3d99 |
|
09-Feb-2017 |
Mickaël Salaün <mic@digikod.net> |
bpf: Add test_tag to .gitignore Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4d3381f5 |
|
21-Jan-2017 |
David Herrmann <dh.herrmann@gmail.com> |
bpf: Add tests for the lpm trie map The first part of this program runs randomized tests against the lpm-bpf-map. It implements a "Trivial Longest Prefix Match" (tlpm) based on simple, linear, single linked lists. The implementation should be pretty straightforward. Based on tlpm, this inserts randomized data into bpf-lpm-maps and verifies the trie-based bpf-map implementation behaves the same way as tlpm. The second part uses 'real world' IPv4 and IPv6 addresses and tests the trie with those. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c839744 |
|
03-Dec-2016 |
Gianluca Borello <g.borello@gmail.com> |
bpf: Preserve const register type on const OR alu ops Occasionally, clang (e.g. version 3.8.1) translates a sum between two constant operands using a BPF_OR instead of a BPF_ADD. The verifier is currently not handling this scenario, and the destination register type becomes UNKNOWN_VALUE even if it's still storing a constant. As a result, the destination register cannot be used as argument to a helper function expecting a ARG_CONST_STACK_*, limiting some use cases. Modify the verifier to handle this case, and add a few tests to make sure all combinations are supported, and stack boundaries are still verified even with BPF_OR. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5aa5bd14 |
|
17-Oct-2016 |
Daniel Borkmann <daniel@iogearbox.net> |
bpf: add initial suite for selftests Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|