perf mem: Clean up perf_pmus__num_mem_pmus()

The number of mem PMUs can be calculated by searching the
perf_pmus__scan_mem().

Remove the ARCH specific perf_pmus__num_mem_pmus()

Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ravi.bangoria@amd.com
Cc: james.clark@arm.com
Cc: will@kernel.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-8-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf mem: Clean up perf_mem_events__record_args()

The current code iterates all memory PMUs. It doesn't matter if the
system has only one memory PMU or multiple PMUs. The check of
perf_pmus__num_mem_pmus() is not required anymore.

The rec_tmp is not used in c2c and mem. Removing them as well.

Suggested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ravi.bangoria@amd.com
Cc: james.clark@arm.com
Cc: will@kernel.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-7-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf mem: Clean up perf_mem_event__supported()

For some ARCHs, e.g., ARM and AMD, to get the availability of the
mem-events, perf checks the existence of a specific PMU. For the other
ARCHs, e.g., Intel and Power, perf has to check the existence of some
specific events.

The current perf only iterates the mem-events-supported PMUs. It's not
required to check the existence of a specific PMU anymore.

Rename sysfs_name to event_name, which stores the specific mem-events.
Perf only needs to check those events for the availability of the
mem-events.

Rename perf_mem_event__supported to perf_pmu__mem_events_supported.

Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: james.clark@arm.com
Cc: will@kernel.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-5-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf mem: Clean up perf_mem_events__name()

Introduce a generic perf_mem_events__name(). Remove the ARCH-specific
one.

The mem_load events may have a different format. Add ldlat and aux_event
in the struct perf_mem_event to indicate the format and the extra aux
event.

Add perf_mem_events_intel_aux[] to support the extra mem_load_aux event.

Rename perf_mem_events__name to perf_pmu__mem_events_name.

Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: james.clark@arm.com
Cc: will@kernel.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-4-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf mem: Clean up perf_mem_events__ptr()

The mem_events can be retrieved from the struct perf_pmu now. An ARCH
specific perf_mem_events__ptr() is not required anymore. Remove all of
them.

The Intel hybrid has multiple mem-events-supported PMUs. But they share
the same mem_events. Other ARCHs only support one mem-events-supported
PMU. In the configuration, it's good enough to only configure the
mem_events for one PMU. Add perf_mem_events_find_pmu() which returns the
first mem-events-supported PMU.

In the perf_mem_events__init(), the perf_pmus__scan() is not required
anymore. It avoids checking the sysfs for every PMU on the system.

Make the perf_mem_events__record_args() more generic. Remove the
perf_mem_events__print_unsupport_hybrid().

Since pmu is added as a new parameter, rename perf_mem_events__ptr() to
perf_pmu__mem_events_ptr(). Several other functions also do a similar
rename.

Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Kajol jain <kjain@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: james.clark@arm.com
Cc: will@kernel.org
Cc: leo.yan@linaro.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-3-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf mem: Add mem_events into the supported perf_pmu

With the mem_events, perf doesn't need to read sysfs for each PMU to
find the mem-events-supported PMU. The patch also makes it possible to
clean up the related __weak functions later.

The patch is only to add the mem_events into the perf_pmu for all ARCHs.
It will be used in the later cleanup patches.

Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Suggested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: will@kernel.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-2-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

perf pmu: Remove logic for PMU name being NULL

The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.

Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230825024002.801955-3-irogers@google.com
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Add statistics for peer snooping

Since the flag PERF_MEM_SNOOPX_PEER is added to support cache snooping
from peer cache line, it can come from a peer core, a peer cluster, or
a remote NUMA node.

This patch adds statistics for the flag PERF_MEM_SNOOPX_PEER. Note, we
take PERF_MEM_SNOOPX_PEER as an affiliated info, it needs to cooperate
with cache level statistics. Therefore, we account the load operations
for both the cache level's metrics (e.g. ld_l2hit, ld_llchit, etc.) and
peer related metrics when flag PERF_MEM_SNOOPX_PEER is set.

So three new metrics are introduced: 'lcl_peer' is for local cache
access, the metric 'rmt_peer' is for remote access (includes remote DRAM
and any caches in remote node), and the metric 'tot_peer' is accounting
the sum value of 'lcl_peer' and 'rmt_peer'.

Reviewed-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220811062451.435810-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Add stats for store operation with no available memory level

Sometimes we don't know memory store operations happen on exactly which
memory (or cache) level, the memory level flag is set to PERF_MEM_LVL_NA
in this case; a practical example is Arm SPE AUX trace sets this flag
for all store operations due to absent info for cache level.

This patch is to add a new item "st_na" in structure c2c_stats to add
statistics for store operations with no available cache level.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adam Li <adamli@amperemail.onmicrosoft.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Alyssa Ross <hi@alyssa.is>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220518055729.1869566-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Support record for hybrid platform

Support 'perf mem record' for hybrid platform. On hybrid platform,
such as Alderlake, when executing 'perf mem record', it actually calls:

record -e {cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}:P
-e cpu_atom/mem-loads,ldlat=30/P
-e cpu_core/mem-stores/P
-e cpu_atom/mem-stores/P

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support pmu prefix for mem-load event

The perf_mem_events__name() can generate the mem-load event name.
It uses a variable 'mem_loads_name__init' to avoid generating the
event name every time (because perf_pmu__scan takes some time).

The perf_mem_events__name() assumes the pmu is "cpu" but it's not
correct for hybrid platform. For Alderlake, the pmu is "cpu_core" or
"cpu_atom"

Introduce a new parameter 'pmu_name' in perf_mem_events__name
to let the caller specify a pmu name.

Considering such event name is x86 specific, so move
perf_mem_events[] to arch/x86/util/mem-events.c.

We still keep the variable 'mem_loads_name__init' but it's only
used when pmu_name is NULL (compatible for original behavior). When
pmu_name is not NULL (e.g. "cpu_core"), this patch doesn't have
optimization. That can be implemented in follow up patch.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem-events: Remove unnecessary 'struct mem_info' forward declaration

'struct mem_info' is defined at 22nd line.

The declaration here is unnecessary. Remove it.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix various typos in comments

Fix ~124 single-word typos and a few spelling errors in the perf tooling code,
accumulated over the years.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210321113734.GA248990@gmail.com
Link: http://lore.kernel.org/lkml/20210323160915.GA61903@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf c2c: Support data block and addr block

'perf c2c' is also a memory profiling tool. Apply the two new data
source fields to 'perf c2c' as well.

Extend 'perf c2c' to display the number of loads which blocked by data or
address conflict.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support data block and addr block

Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.

Add a new sort function, SORT_MEM_BLOCKED, for the two fields.

For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.

Add blocked as a default mem sort key for perf report and perf mem
report.

Committer testing:

So in machines without this capability we get a "N/A" filling the new "Blocked"
column:

$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A

# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A

# (Tip: Show user configuration overrides: perf config --user --list)
$

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support the auxiliary event

On the Intel Sapphire Rapids server, an auxiliary event has to be
enabled simultaneously with the load latency event to retrieve complete
Memory Info.

Add X86 specific perf_mem_events__name() to handle the auxiliary event.

- Users are only interested in the samples of the mem-loads event.
Sample read the auxiliary event.

- The auxiliary event must be in front of the load latency event in a
group. Assume the second event to sample if the auxiliary event is the
leader.

- Add a weak is_mem_loads_aux_event() to check the auxiliary event for
X86. For other ARCHs, it always return false.

Parse the unique event name, mem-loads-aux, for the auxiliary event.

Committer notes:

According to 61b985e3e775a3a7 ("perf/x86/intel: Add perf core PMU
support for Sapphire Rapids"), ENODATA is only returned by
sys_perf_event_open() when used with these auxiliary events, with this
in evsel__open_strerror():

case ENODATA:
return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "
"Please add an auxiliary event in front of the load latency event.");

This is Ok at this point in time, but fragile long term, I pointed this
out in the e-mail thread, requesting a follow up patch to check if
ENODATA is really for this specific case.

Fixed up sizeof(MEM_LOADS_AUX_NAME) bug pointed out by Namhyung.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210205152648.GC920417@kernel.org
Link: http://lore.kernel.org/lkml/1612296553-21962-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Support new memory event PERF_MEM_EVENTS__LOAD_STORE

On the architectures with perf memory profiling, two types of hardware
events have been supported: load and store; if want to profile memory
for both load and store operations, the tool will use these two events
at the same time, the usage is:

# perf mem record -t load,store -- uname

But this cannot be applied for AUX tracing event, the same PMU event can
be used to only trace memory load, or only memory store, or trace for
both memory load and store.

This patch introduces a new event PERF_MEM_EVENTS__LOAD_STORE, which is
used to support the event which can record both memory load and store
operations.

When user specifies memory operation type as 'load,store', or doesn't
set type so use 'load,store' as default, if the arch supports the event
PERF_MEM_EVENTS__LOAD_STORE, the tool will convert the required
operations to this single event; otherwise, if the arch doesn't support
PERF_MEM_EVENTS__LOAD_STORE, the tool rolls back to enable both events
PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE, which keeps the same
behaviour with before.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Introduce weak function perf_mem_events__ptr()

Different architectures might use different event or different event
parameters for memory profiling, this patch introduces a weak
perf_mem_events__ptr() function which allows to return back a
architecture specific memory event.

Since the variable 'perf_mem_events' can be only accessed by the
perf_mem_events__ptr() function, mark the variable as 'static', this
allows the architectures to define its own memory event array.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf c2c: Fix 'perf c2c record -e list' to show the default events used

When the event is passed as list, the default events should be listed as
per 'perf mem record -e list'. Previous behavior is:

$ perf c2c record -e list
failed: event 'list' not found, use '-e list' to get list of available events

Usage: perf c2c record [<options>] [<command>]
or: perf c2c record [<options>] -- <command> [<options>]

-e, --event <event> event selector. Use 'perf mem record -e list' to list available events
$

New behavior:

$ perf c2c record -e list
ldlat-loads : available
ldlat-stores : available

v3: is a rebase.
v2: addresses review comments by Jiri Olsa.

https://lore.kernel.org/lkml/20191127081844.GH32367@krava/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200507220604.3391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Move mem_info and branch_info out of symbol.h

The mem_info struct goes to mem-events.h and branch_info goes to
branch.h, where they belong, this way we can remove several headers from
symbols.h and trim the include dependency tree more.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf c2c report: Add struct c2c_stats::tot_hitm field

Count total number of HITMs in a special field. This will ease up
addition of total HITM sorting into c2c report in the following patch.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf c2c: Introduce c2c_add_stats function

Introducing c2c_add_stats function helper to cumulate c2c_stats.

Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf c2c: Introduce c2c_decode_stats function

Introducing c2c_decode_stats function, which decodes
data_src data into new struct c2c_stats.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Add --ldlat option

Adding --ldlat option to specify desired latency for loads event.

Specify 50 as loads event latency:

$ perf mem record -e ldlat-loads -v --ldlat 50 true
calling: record -W -d -e cpu/mem-loads,ldlat=50/P true

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Display data_src values

Adding support to display data_src values, for events with data_src data
in sample.

Example:
$ perf script
...
rcuos/3 32 [002] ... 68501042 Local RAM hit|SNP None or Hit|TLB L1 or L2 hit|LCK No ...
rcuos/3 32 [002] ... 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No ...
swapper 0 [002] ... 68100242 LFB hit|SNP None|TLB L1 or L2 hit|LCK No ...
swapper 0 [000] ... 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No ...
swapper 0 [000] ... 50100142 L1 hit|SNP None|TLB L2 miss|LCK No ...
rcuos/3 32 [002] ... 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No ...
plugin-containe 16538 [000] ... 6a100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK Yes ...
gkrellm 1736 [000] ... 68100242 LFB hit|SNP None|TLB L1 or L2 hit|LCK No ...
gkrellm 1736 [000] ... 6a100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK Yes ...

^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
data_src value data_src translation

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Change perf_mem__lck_scnprintf to return nb of displayed bytes

Moving strncat call into scnprintf to easily track number of displayed
bytes. It will be used in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Change perf_mem__snp_scnprintf to return nb of displayed bytes

Moving strncat/strcpy calls into scnprintf to easily track number of
displayed bytes. It will be used in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Change perf_mem__lvl_scnprintf to return nb of displayed bytes

Moving strncat/strcpy calls into scnprintf to easily track number of
displayed bytes. It will be used in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Change perf_mem__tlb_scnprintf to return nb of displayed bytes

Moving strncat/strcpy calls into scnprintf to easily track
number of displayed bytes. It will be used in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce perf_mem__lck_scnprintf function

Move meminfo's lck display function into mem-events.c object, so it
could be reused later from script code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce perf_mem__snp_scnprintf function

Move meminfo's snp display function into mem-events.c object, so it
could be reused later from script code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce perf_mem__lvl_scnprintf function

Move meminfo's lvl display function into mem-events.c object, so it
could be reused later from script code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce perf_mem__tlb_scnprintf function

Move meminfo's tlb display function into mem-events.c object, so it
could be reused later from script code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Introduce perf_mem_events__name function

Wrap perf_mem_events[].name into perf_mem_events__name() so we could alter the
events name if needed.

This will be handy when changing latency settings for loads event in following
patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem record: Check for memory events support

Check if current kernel support available memory events and display the
status within -e list option:

$ perf mem record -e list
ldlat-loads : available
ldlat-stores : available

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf mem: Add -e record option

Adding -e option for perf mem record command, to be able to specify
memory event directly.

Get list of available events:

$ perf mem record -e list
ldlat-loads
ldlat-stores

Monitor ldlat-loads:
$ perf mem record -e ldlat-loads true

Committer notes:

Further testing:

# perf mem record -e ldlat-loads true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (10 samples) ]
# perf evlist
cpu/mem-loads,ldlat=30/P
#

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add monitored events array

It will ease up configuration of memory events and addition of other
memory events in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>