#
fd3f518f |
|
09-Nov-2022 |
Ian Rogers <irogers@google.com> |
perf thread_map: Reduce exposure of libperf internal API Remove unnecessary include of internal threadmap.h and refcount.h in thread_map.h. Switch to using public APIs when possible or including the internal header file in the C file. Fix a transitive dependency in openat-syscall.c broken by the clean up. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221109184914.1357295-13-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
33f44bfd |
|
04-Nov-2021 |
Ian Rogers <irogers@google.com> |
perf test: Rename struct test to test_suite This is to align with kunit's terminology. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211104064208.3156807-6-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
d68f0365 |
|
04-Nov-2021 |
Ian Rogers <irogers@google.com> |
perf test: Move each test suite struct to its test Rather than export test functions, export the test struct. Rename with a suite__ prefix to avoid name collisions. Committer notes: Its '&suite__vectors_page', not '&suite__vectors_pages', noticed when cross building to arm (32-bit). Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211104064208.3156807-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
641b6250 |
|
01-Mar-2021 |
Namhyung Kim <namhyung@kernel.org> |
perf test: Fix a memory leak in thread_map_remove test The str should be freed after creating a thread map. Also change the open-coded thread map deletion to a call to perf_thread_map__put(). $ perf test -v 44 44: Remove thread map : --- start --- test child forked, pid 165536 2 threads: 165535, 165536 1 thread: 165536 0 thread: ================================================================= ==165536==ERROR: LeakSanitizer: detected memory leaks Direct leak of 14 byte(s) in 1 object(s) allocated from: #0 0x7f54453ffe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x7f5444f8c6a7 in __vasprintf_internal libio/vasprintf.c:71 SUMMARY: AddressSanitizer: 14 byte(s) leaked in 1 allocation(s). test child finished with 1 ---- end ---- Remove thread map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-10-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
4be42882 |
|
01-Mar-2021 |
Namhyung Kim <namhyung@kernel.org> |
perf test: Fix a thread map leak in thread_map_synthesize test It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
ea49e01c |
|
18-Sep-2019 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf tools: Move event synthesizing routines to separate header Those are the only routines using the perf_event__handler_t typedef and are all related, so move to a separate header to reduce the header dependency tree, lots of places were getting event.h and even stdio.h, limits.h indirectly, so fix those as well. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
8520a98d |
|
29-Aug-2019 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf debug: Remove needless include directives from debug.h All we need there is a forward declaration for 'union perf_event', so remove it from there and add missing header directives in places using things from this indirect include. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
72932371 |
|
28-Aug-2019 |
Jiri Olsa <jolsa@kernel.org> |
libperf: Rename the PERF_RECORD_ structs to have a "perf" prefix Even more, to have a "perf_record_" prefix, so that they match the PERF_RECORD_ enum they map to. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
a2f354e3 |
|
22-Aug-2019 |
Jiri Olsa <jolsa@kernel.org> |
libperf: Add perf_thread_map__nr/perf_thread_map__pid functions So it's part of libperf library as basic functions operating on perf_thread_map objects. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
7836e52e |
|
21-Jul-2019 |
Jiri Olsa <jolsa@kernel.org> |
libperf: Add perf_thread_map__get()/perf_thread_map__put() Move the following functions: thread_map__get() thread_map__put() thread_map__comm() to libperf with the following names: perf_thread_map__get() perf_thread_map__put() perf_thread_map__comm() Add the perf_thread_map__comm() function for it to work/compile. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-34-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
4b49cce2 |
|
21-Jul-2019 |
Jiri Olsa <jolsa@kernel.org> |
libperf: Add perf_thread_map__new_dummy() function Moving the following functions: thread_map__new_dummy() thread_map__realloc() thread_map__set_pid() to libperf with the following names: perf_thread_map__new_dummy() perf_thread_map__realloc() perf_thread_map__set_pid() the other 2 functions are dependencies of the perf_thread_map__new_dummy() function. The perf_thread_map__realloc() function is not exported. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-33-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
9749b90e |
|
21-Jul-2019 |
Jiri Olsa <jolsa@kernel.org> |
perf tools: Rename struct thread_map to struct perf_thread_map Rename struct thread_map to struct perf_thread_map, so it could be part of libperf. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
d8f9da24 |
|
03-Jul-2019 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf tools: Use zfree() where applicable In places where the equivalent was already being done, i.e.: free(a); a = NULL; And in placs where struct members are being freed so that if we have some erroneous reference to its struct, then accesses to freed members will result in segfaults, which we can detect faster than use after free to areas that may still have something seemingly valid. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-jatyoofo5boc1bsvoig6bb6i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
73c0ca1e |
|
05-Dec-2017 |
Jin Yao <yao.jin@linux.intel.com> |
perf thread_map: Enumerate all threads from /proc This patch calls thread_map__new_all_cpus() to enumerate all threads from /proc if per-thread flag is enabled. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512482591-4646-10-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
81f17c90 |
|
03-Aug-2017 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf test: Add 'struct test *' to the test functions This way we'll be able to pass more test specific parameters without having to change this function signature. Will be used by the upcoming 'shell tests', shell scripts that will call perf tools and check if they work as expected, comparing its effects on the system (think 'perf probe foo') the output produced, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
364fed35 |
|
21-Feb-2017 |
Elena Reshetova <elena.reshetova@intel.com> |
perf thread_map: Convert thread_map.refcnt from atomic_t to refcount_t The refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Kook <keescook@chromium.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Windsor <dwindsor@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Kook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: alsa-devel@alsa-project.org Link: http://lkml.kernel.org/r/1487691303-31858-10-git-send-email-elena.reshetova@intel.com [ Did missing tests/thread-map.c conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
bb963e16 |
|
17-Feb-2017 |
Namhyung Kim <namhyung@kernel.org> |
perf utils: Check verbose flag properly It now can have negative value to suppress the message entirely. So it needs to check it being positive. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org [ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
38af91f0 |
|
12-Dec-2016 |
Jiri Olsa <jolsa@kernel.org> |
perf thread_map: Add thread_map__remove function Add thread_map__remove function to remove thread from thread map. Add automated test also. Committer notes: Testing it: # perf test "Remove thread map" 39: Remove thread map : Ok # perf test -v "Remove thread map" 39: Remove thread map : --- start --- test child forked, pid 4483 2 threads: 4482, 4483 1 thread: 4483 0 thread: test child finished with 0 ---- end ---- Remove thread map: Ok # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org [ Added stdlib.h, to get the free() declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
8fbc38aa |
|
28-Jun-2016 |
Jiri Olsa <jolsa@kernel.org> |
perf tests: Fix thread map test for -F option I hit a bug when running test suite without forking each test (-F option): $ perf test -Fv ... 34: Test thread map : --- start --- FAILED tests/thread-map.c:24 wrong comm ---- end ---- Test thread map: FAILED! The reason was the process name wasn't 'perf' as expected by the test, because other tests set the name as well. Setting it explicitly now. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
59660942 |
|
25-Oct-2015 |
Jiri Olsa <jolsa@kernel.org> |
perf thread_map: Add thread_map__new_event function Introducing the thread_map__new_event function to create a struct thread_map object from a thread_map event. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Kan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
99471c96 |
|
25-Oct-2015 |
Jiri Olsa <jolsa@kernel.org> |
perf thread_map: Add thread_map event sythesize function Introduce the perf_event__synthesize_thread_map2 function to synthesize struct thread_map. The perf_event__synthesize_thread_map name is already taken for synthesizing the complete threads data (comm/mmap/fork). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Kan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-5-git-send-email-jolsa@kernel.org [ Rename thread_map_data_event to thread_map_event_entry ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
721a1f53 |
|
18-Nov-2015 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf tests: Pass the subtest index to each test routine Some tests have sub-tests we want to run, so allow passing this. Wang tried to avoid having to touch all tests, but then, having the test.func in an anonymous union makes the build fail on older compilers, like the one in RHEL6, where: test a = { .func = foo, }; fails. To fix it leave the func pointer in the main structure and pass the subtest index to all tests, end result function is the same, but we have just one function pointer, not two, with and without the subtest index as an argument. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
35318d20 |
|
21-Jul-2015 |
Jiri Olsa <jolsa@kernel.org> |
perf test: Check for refcnt in thread_map test Checking also for refcnt in thread_map test. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1437481927-29538-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
134aa44f |
|
26-Jun-2015 |
Jiri Olsa <jolsa@kernel.org> |
perf tests: Add thread_map object tests Adding thread_map object tests for comm name values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|