libbpf: add map_get_fd_by_id and map_delete_elem in light skeleton

This allows to have a better control over maps from the kernel when
preloading eBPF programs.

Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220824134055.1328882-8-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

libbpf: Streamline bpf_attr and perf_event_attr initialization

Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.

Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org

bpf: Disallow bpf programs call prog_run command.

The verifier cannot perform sufficient validation of bpf_attr->test.ctx_in
pointer, therefore bpf programs should not be allowed to call BPF_PROG_RUN
command from within the program.
To fix this issue split bpf_sys_bpf() bpf helper into normal kern_sys_bpf()
kernel function that can only be used by the kernel light skeleton directly.

Reported-by: YiFei Zhu <zhuyifei@google.com>
Fixes: b1d18a7574d0 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

libbpf: Prepare light skeleton for the kernel.

Prepare light skeleton to be used in the kernel module and in the user space.
The look and feel of lskel.h is mostly the same with the difference that for
user space the skel->rodata is the same pointer before and after skel_load
operation, while in the kernel the skel->rodata after skel_open and the
skel->rodata after skel_load are different pointers.
Typical usage of skeleton remains the same for kernel and user space:
skel = my_bpf__open();
skel->rodata->my_global_var = init_val;
err = my_bpf__load(skel);
err = my_bpf__attach(skel);
// access skel->rodata->my_global_var;
// access skel->bss->another_var;

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-3-alexei.starovoitov@gmail.com

libbpf: Open code raw_tp_open and link_create commands.

Open code raw_tracepoint_open and link_create used by light skeleton
to be able to avoid full libbpf eventually.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220131220528.98088-4-alexei.starovoitov@gmail.com

libbpf: Open code low level bpf commands.

Open code low level bpf commands used by light skeleton to
be able to avoid full libbpf eventually.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220131220528.98088-3-alexei.starovoitov@gmail.com

bpf, mips: Fix build errors about __NR_bpf undeclared

Add the __NR_bpf definitions to fix the following build errors for mips:

$ cd tools/bpf/bpftool
$ make
[...]
bpf.c:54:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
bpf.c: In function ‘sys_bpf’:
bpf.c:66:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
[...]
In file included from gen_loader.c:15:0:
skel_internal.h: In function ‘skel_sys_bpf’:
skel_internal.h:53:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk

We can see the following generated definitions:

$ grep -r "#define __NR_bpf" arch/mips
arch/mips/include/generated/uapi/asm/unistd_o32.h:#define __NR_bpf (__NR_Linux + 355)
arch/mips/include/generated/uapi/asm/unistd_n64.h:#define __NR_bpf (__NR_Linux + 315)
arch/mips/include/generated/uapi/asm/unistd_n32.h:#define __NR_bpf (__NR_Linux + 319)

The __NR_Linux is defined in arch/mips/include/uapi/asm/unistd.h:

$ grep -r "#define __NR_Linux" arch/mips
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 4000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 5000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 6000

That is to say, __NR_bpf is:

4000 + 355 = 4355 for mips o32,
6000 + 319 = 6319 for mips n32,
5000 + 315 = 5315 for mips n64.

So use the GCC pre-defined macro _ABIO32, _ABIN32 and _ABI64 [1] to define
the corresponding __NR_bpf.

This patch is similar with commit bad1926dd2f6 ("bpf, s390: fix build for
libbpf and selftest suite").

[1] https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/mips/mips.h#l549

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1637804167-8323-1-git-send-email-yangtiezhu@loongson.cn

libbpf: Use bpf_map_create() consistently internally

Remove all the remaining uses of to-be-deprecated bpf_create_map*() APIs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-3-andrii@kernel.org

libbpf: Fix skel_internal.h to set errno on loader retval < 0

When the loader indicates an internal error (result of a checked bpf
system call), it returns the result in attr.test.retval. However, tests
that rely on ASSERT_OK_PTR on NULL (returned from light skeleton) may
miss that NULL denotes an error if errno is set to 0. This would result
in skel pointer being NULL, while ASSERT_OK_PTR returning 1, leading to
a SEGV on dereference of skel, because libbpf_get_error relies on the
assumption that errno is always set in case of error for ptr == NULL.

In particular, this was observed for the ksyms_module test. When
executed using `./test_progs -t ksyms`, prior tests manipulated errno
and the test didn't crash when it failed at ksyms_module load, while
using `./test_progs -t ksyms_module` crashed due to errno being
untouched.

Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-11-memxor@gmail.com

bpf: Add cmd alias BPF_PROG_RUN

Add BPF_PROG_RUN command as an alias to BPF_RPOG_TEST_RUN to better
indicate the full range of use cases done by the command.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519014032.20908-1-alexei.starovoitov@gmail.com

libbpf: Generate loader program out of BPF ELF file.

The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs

During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.

kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.

The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com