ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.

This patch adds a USB quirk for Mythware XA001AU USB interface.

Signed-off-by: dengxiang <dengxiang@nfschina.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230803024437.370069-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Pioneer DDJ-800

One more Pioneer quirk, this time for DDJ-800, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.

Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Grégory Desor <gregory.desor@free.fr>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ZFLLzgEcsSF5aIHG@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add the quirk for KT0206 device

Add relevant information to the quirks-table.h file.
The test passes and the sound source file plays normally.

Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/SG2PR02MB587849631CB96809CF90DBED8A1A9@SG2PR02MB5878.apcprd02.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk entry for M-Audio Micro

M-Audio Micro (0762:201a) defines the descriptor as vendor-specific,
while the content seems class-compliant. Just overriding the probe
makes the device working.

Reported-by: Ash Logan <ash@heyquark.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7ecd4417-d860-4773-c1c1-b07433342390@heyquark.com
Link: https://lore.kernel.org/r/20221108140721.24248-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support

Add support for Avid Mbox3 USB audio interface at 48kHz

Signed-off-by: Conner Knox <connerknoxpublic@gmail.com>
Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)

The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.

I got two more units and successfully tested the patch series with both
firmwares.

The support is now complete (not accounting ASIO).

Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Fiero SC-01

Fiero SC-01 is a USB sound card with two mono inputs and a single
stereo output. The inputs are composed into a single stereo stream.

The device uses a vendor-provided driver on Windows and does not work
at all without it. The driver mostly provides ASIO functionality, but
also alters the way the sound card is queried for sample rates and
clocks.

ALSA queries those failing with an EPIPE (same as Windows 10 does).
Presumably, the vendor-provided driver does not query it at all, simply
matching by VID:PID. Thus, I consider this a buggy firmware and adhere
to a set of fixed endpoint quirks instead.

The soundcard has an internal clock. Implicit feedback mode is required
for the playback.

I have updated my device to v1.1.0 from a Windows 10 VM using a vendor-
provided binary prior to the development, hoping for it to just begin
working. The device provides no obvious way to downgrade the firmware,
and regardless, there's no binary available for v1.0.0 anyway.

Thus, I will be getting another unit to extend the patch with support
for that. Expected to be a simple copy-paste of the existing one,
though.

There were no previous reports of that device in context of Linux
anywhere. Other issues have been reported though, but that's out of the
scope.

Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-1-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices

Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.

Signed-off-by: John Veness <john-linux@pelago.org.uk>
Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Set up (implicit) sync for Saffire 6

Focusrite Saffire 6 has fixed audioformat quirks with multiple
endpoints assigned to a single altsetting. Unfortunately the generic
parser couldn't detect the sync endpoint correctly as the implicit
sync due to the missing EP attribute bits. In the former kernels, it
used to work somehow casually, but it's been broken for a while after
the large code change in 5.11.

This patch cures the regression by the following:
- Allow the static quirk table to provide the sync EP information;
we just need to fill the fields and let the generic parser skipping
parsing if sync_ep is already set.
- Add the sync endpoint information to the entry for Saffire 6.

Fixes: 7b0efea4baf0 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add missing ep_idx in fixed EP quirks

The quirk entry for Focusrite Saffire 6 had no proper ep_idx for the
capture endpoint, and this confused the driver, resulting in the
broken sound. This patch adds the missing ep_idx in the entry.

While we are at it, a couple of other entries (for Digidesign MBox and
MOTU MicroBook II) seem to have the same problem, and those are
covered as well.

Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Reported-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220521065325.426-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Restore Rane SL-1 quirk

At cleaning up and moving the device rename from the quirk table to
its own table, we removed the entry for Rane SL-1 as we thought it's
only for renaming. It turned out, however, that the quirk is required
for matching with the device that declares itself as no standard
audio but only as vendor-specific.

Restore the quirk entry for Rane SL-1 to fix the regression.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887
Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220516103112.12950-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Correct quirk for VF0770

This device provides both audio and video. The original quirk added in
commit 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770") used
USB_DEVICE to match the vendor and product ID. Depending on module order,
if snd-usb-audio was asked first, it would match the entire device and
uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE
to restore uvcvideo matching in all cases.

Fixes: 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770")
Reported-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Tested-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Reported-by: Paweł Susicki <pawel.susicki@gmail.com>
Tested-by: Paweł Susicki <pawel.susicki@gmail.com>
Cc: <stable@vger.kernel.org> # 5.4, 5.10, 5.14, 5.15
Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Link: https://lore.kernel.org/r/20220131183516.61191-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard

The kernel already has support for very similar Pioneer djm products
and this work is based on that.

Added device to quirks-table.h and added control info to
mixer_quirks.c.

Tested on my hardware and all working.

Signed-off-by: William Overton <willovertonuk@gmail.com>
Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset

As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13

The GSP670 has 2 playback and 1 recording device that by default are
detected in an incompatible order for alsa. This may have been done to make
it compatible for the console by the manufacturer and only affects the
latest firmware which uses its own ID.

This quirk will resolve this by reordering the channels.

Signed-off-by: Brendan Grieve <brendan@grieve.com.au>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for VF0770

The device advertises 8 formats, but only a rate of 48kHz is honored
by the hardware and 24 bits give chopped audio, so only report the
one working combination. This fixes out-of-the-box audio experience
with PipeWire which otherwise attempts to choose S24_3LE (while
PulseAudio defaulted to S16_LE).

Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Move autosuspend quirk into quirk_flags

The auto-suspend suppression workaround for Lenovo machines are
handled in quirks-table.h. Now it's more easier to handle with
quirk_flags.

Link: https://lore.kernel.org/r/20210729074404.19728-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Move txfr_quirk handling to quirk_flags

The txfr_quirk field was meant for aligning the transfer, and it's set
for certain devices in quirks-table.h. Now we can move that stuff
also to the new quirk_flags gracefully, and reduce the quirks-table.h
entries (that are exposed to module device table).

As the quirks-table.h entries are also with the name string override,
provide the corresponding entries to the usb_audio_names[] table,
too.

Link: https://lore.kernel.org/r/20210729073855.19043-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Move media-controller API quirk into quirk_flags

The devices that can have media-controller API entries are currently
specified via tables in quirks-table.h, as a part of descriptor
override. This can fit better to the new quirk_flags, as we just need
a matching with the given ID and create the MC entries accordingly.

Link: https://lore.kernel.org/r/20210729073855.19043-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Denon DN-X1600

This provides support for Denon DN-X1600 hardware mixer.

The device itself supports 44100, 48000 and 96000 (Hz)
sample rates, but switching rates via software is currently not working.
Therefore, this patch hardcodes the sample rate to 48000Hz which
enables all 8 channels to function correctly when the correct
sample rate is selected on the hardware itself.

MIDI also tested and works.

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Tested-by: xalmoxis@gmail.com
Link: https://lore.kernel.org/r/20210610083528.603942-2-damien@zamaudio.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX

ToneLab EX guitar pedal device requires the same quirk like ToneLab ST
for supporting the MIDI.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Skip probe of UA-101 devices

UA-101 device and co are supported by another driver, snd-ua101, but
the USB audio class driver (snd-usb-audio) catches all and this
resulted in the lack of functionality like missing MIDI devices.

This patch introduces a sort of deny-listing for those devices to just
return -ENODEV at probe in snd-usb-audio driver, so that it falls back
to the probe by snd-ua101.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212477
Link: https://lore.kernel.org/r/20210408075656.30184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add Pioneer DJM-850 to quirks-table

Declare the Pioneer DJM-850 interfaces for capture and playback.

See https://github.com/nm2107/Pioneer-DJM-850-driver-reverse-engineering/blob/172fb9a61055960c88c67b7c416fe5bf3609807b/doc/usb-device-specifications.md
for the complete device spec.

Signed-off-by: Nicolas MURE <nicolas.mure2019@gmail.com>
Link: https://lore.kernel.org/r/20210301152729.18094-2-nicolas.mure2019@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add DJM-450 to the quirks table

As with most Pioneer devices, the device descriptor is vendor specific
and as such, the number of channels, the PCM format, endpoints and
sample rate need to be specified. This device has 8 inputs and 8 outputs
and a sample rate of 48000 only. The PCM format is S24_3LE like other
devices.

There seems to be an appetite for reducing duplication amongs these
Pioneer patches but again, I feel this is a step to be taken after
support has been added as it's not completely clear where the
commonalities are.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210202134225.3217-3-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Pioneer DJM-750

This adds the Pioneer DJ DJM-750 to the quirks table and ensures
skip_pioneer_sync_ep() is (also) called: this device uses the vendor
ID of 0x08e4 (I'm not sure why they use multiple vendor IDs but many
just like to be awkward it seems).

Playback on all 8 channels works. I'll likely keep this working in the
future and submit futher patches and improvements as necessary.

Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://lore.kernel.org/r/20210118130621.77miiie47wp7mump@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Annotate the endpoint index in audioformat

There are devices that have multiple endpoints sharing the same
iface/altset not only for sync but also for the actual streams, and
the audioformat for such an endpoint needs to be handled with the
proper endpoint index; otherwise it confuses the endpoint management.

This patch extends the audioformat to annotate the endpoint index, and
put the proper ep_idx=1 to Pioneer device quirk entries accordingly.

Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210108075219.21463-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Pioneer DJ DDJ-SR2

Yet another quirk for Pioneer DJ DDJ-SR2, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.

Reported-by: Geraldo <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/20201130083714.10640-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Pioneer DJ DDJ-RR controller

This patch allows the Pioneer DJ DDJ-RR to be seen as a USB audio
device under Linux and therefore usable in such applications as
Mixxx.

Tested Master Audio out, headphones (both output jacks) and microphone
input. All work perfectly.

Signed-off-by: Daniel Martin <dmanlfc@gmail.com>
Link: https://lore.kernel.org/r/20201128084035.2958-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Always set up the parameters after resume

The commit 92adc96f8eec ("ALSA: usb-audio: set the interface format
after resume on Dell WD19") introduced the workaround for the broken
setup after the resume specifically on a Dell dock model. However,
the full setup should have been performed after the resume on all
devices, as we can't guarantee the same state. So this patch removes
the conditional check and applies the workaround always.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2

This patch extends support for DJM-250MK2 and allows recording.
However, DVS is not possible yet (see the comment in code).

Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Correct wrongly matching entries with audio class

The commit 51ab5d77dcb8 ("ALSA: usb-audio: Properly match with audio
interface class") converted the quirk entries that have both vid/pid
pair and bInterface fields to match with all those with a new macro
USB_AUDIO_CLASS(). However, it turned out that those are false
conversions; all those (but the unknown KeithMcMillen device) are
actually with vendor-specific interface class, hence the conversions
broke the matching.

This patch corrects those entries to the right one,
USB_DEVICE_VENDOR_SPEC() (and USB_DEVICE() for KeithMcMillen to be
sure), and drop the unused USB_AUDIO_CLASS macro again.

Fixes: 51ab5d77dcb8 ("ALSA: usb-audio: Properly match with audio interface class")
Reported-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200823113251.10175-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620

If USB autosuspend is enabled, both front and rear panel can no longer
detect jack insertion.

Enable USB remote wakeup, i.e. needs_remote_wakeup = 1, doesn't help
either.

So disable USB autosuspend to prevent missing jack detection event.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200823105854.26950-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Properly match with audio interface class

There are a few entries in the quirk table that set the device ID with
USB_DEVICE() macro while having an extra bInterfaceClass field. But
bInterfaceClass field is never checked unless the proper match_flags
is set, so those may match incorrectly with all interfaces.

Introduce another macro to match with the vid/pid pair and the audio
class interface, and apply it to such entries, so that they can match
properly.

Link: https://lore.kernel.org/r/20200817082140.20232-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Simplify quirk entries with a macro

Introduce a new macro USB_AUDIO_DEVICE() for the entries matching with
the pid/vid pair and the class/subclass, and remove the open-code.

Link: https://lore.kernel.org/r/20200817082140.20232-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Move device rename and profile quirks to an internal table

So far we've added the devices that need vendor/product string renames
or the profile setup into the standard quirk table in quirks-table.h.
This table is imported into the primary USB audio device entry, hence
it's all exported for the probing so that udev and co can take a look
at it. OTOH, for renaming or profile setup, we don't need to expose
those explicit entries because the probe itself follows the standard
way. That said, we're exposing unnecessarily too many entries.

This patch moves such internal quirk entries into the own table, and
reduces the exported device table size. Along with the moving items,
re-arrange the entries in the proper order.

Link: https://lore.kernel.org/r/20200817082140.20232-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Update documentation comment for MS2109 quirk

As the recent fix addressed the channel swap problem more properly,
update the comment as well.

Fixes: 1b7ecc241a67 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109")
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)

Capture and playback endpoints on Saffire 6 (USB 1.1) resides on the same
interface. This was not supported by the composite quirk back in the day
when initial support for this device was added, thus only playback was
enabled until now.

Fixes: 11e424e88bd4 ("ALSA: usb-audio: Add support for Focusrite Saffire 6 USB")
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable.vger.kernel.org>
Link: https://lore.kernel.org/r/20200815002103.29247-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add quirk for Pioneer DDJ-RB

This is just another Pioneer device with fixed endpoints. Input is dummy
but used as feedback (it always returns silence).

Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200810082502.225979-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: fix overeager device match for MacroSilicon MS2109

Matching by device matches all interfaces, which breaks the video/HID
portions of the device depending on module load order.

Fixes: e337bf19f6af ("ALSA: usb-audio: add quirk for MacroSilicon MS2109")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200810045319.128745-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add startech usb audio dock name

The dock sold from startech (PID: ICUSBAUDIO7D) has no friendly name
and shows up currently as "USB Sound Device" in ALSA.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20200804010616.3399256-1-cujomalainey@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Lenovo ThinkStation P620

Lenovo ThinkStation P620 is like other TRX40 boards, is equipped with
two USB audio cards.

USB device (17aa:104d) provides functionality for Internal Speaker and
Front Headset. It's UAC v2, so it supports insertion control (jack
detection). However, when trying to get the connector status of the
speaker, an error occurs:
[ 5.787405] usb 3-1: cannot get connectors status: req = 0x81, wValue = 0x200, wIndex = 0x1000, type = 0

Since the insertion control works perfectly for the headset, the error
for speaker is probably casued by connecting internally. So let's relax
the error for a bit if it's a speaker, and always reports it's connected.

USB device (17aa:1046) is for rear Line-in, Line-out and Microphone.
The insertion control works for all three jacks. However, there's an
Function Unit that doesn't work:
[ 5.905415] usb 3-6: cannot get ctl value: req = 0x83, wValue = 0xc00, wIndex = 0x1300, type = 4
[ 5.905418] usb 3-6: 19:0: cannot get min/max values for control 12 (id 19)

So turn off the FU to avoid the error.

Also, add specific card name for both devices, so userspace can easily
indentify both cards.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200803142612.17156-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Replace blacklist word

Follow the recent inclusive terminology guidelines and replace the
word "blacklist" appropriately.

Only a comment fix, no functional changes.

Link: https://lore.kernel.org/r/20200714172631.25371-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add quirk for MacroSilicon MS2109

These devices claim to be 96kHz mono, but actually are 48kHz stereo with
swapped channels and unaligned transfers.

Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Use the new macro for HP Dock rename quirks

Replace the open-code with the new QUIRK_DEVICE_PROFILE() macro for
simplicity.

Fixes: 0c5086f56999 ("ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock")
Link: https://lore.kernel.org/r/20200608071513.570-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock

The HP Thunderbolt Dock has two separate USB devices, one is for speaker
and one is for headset. Add names for them so userspace can apply UCM
settings.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200608062630.10806-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support

Pioneer DJ DJM-900NXS2 is a widely used DJ mixer with 2 audio USB
interfaces. Both have a MIDI controller, 10 playback and 12 capture
channels. Audio endpoints are vendor-specific and 3 files need to be
patched. All playback and capture channels work fine with all supported
sample rates (44.1k, 48k, 96k). Patches are attached.

Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Link: https://lore.kernel.org/r/48ab19ff-3303-9bf8-ed0e-bcb31d8537eb@d-systems.ee
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Clean up quirk entries with macros

Introduced a couple of macros to simplify some quirk entries.
Just cosmetic, no functional changes.

Link: https://lore.kernel.org/r/20200527061227.24915-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio

Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices,
a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC
(USB ID 0414:a000). The latter serves solely for the headphone output
on the front panel while the former serves for the rest I/Os (mostly
for the I/Os in the rear panel but also including the front mic).

Both chips do work more or less with the unmodified USB-audio driver,
but there are a few glitches. The ALC1220-VB returns an error for an
inquiry to some jacks, as already seen on other TRX40-based mobos.
However this machine has a slightly incompatible configuration, hence
the existing mapping cannot be used as is.

Meanwhile the ESS chip seems working without any quirk. But since
both audio devices don't provide any specific names, both cards appear
as "USB-Audio", and it's quite confusing for users.

This patch is an attempt to overcome those issues:

- The specific mapping table for ALC1220-VB is provided, reducing the
non-working nodes and renaming the badly chosen controls.
The connector map isn't needed here unlike other TRX40 quirks.

- For both USB IDs (0414:a000 and 0414:a001), provide specific card
name strings, so that user-space can identify more easily; and more
importantly, UCM profile can be applied to each.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526082810.29506-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add mapping for ASRock TRX40 Creator

This is another TRX40 based motherboard with ALC1220-VB USB-audio
that requires a static mapping table.

This motherboard also has a PCI device which advertises no codecs. The
PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD
vendor ID, don't blacklist for now in case other boards have a working
audio device with the same ssid.

alsa-info.sh report for this board:
http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c

Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2

Force it to use asynchronous playback.

Same quirk has already been added for Focusrite Scarlett Solo (2nd gen)
with a commit 46f5710f0b88 ("ALSA: usb-audio: Add quirk for Focusrite
Scarlett Solo").

This also seems to prevent regular clicks when playing at 44100Hz
on Scarlett 2i2 (2nd gen). I did not notice any side effects.

Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested.

Signed-off-by: Gregor Pintar <grpintar@gmail.com>
Reviewed-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200420214030.2361-1-grpintar@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos

TRX40 mobos from MSI and others with ALC1220-VB USB-audio device need
yet more quirks for the proper control names.

This patch provides the mapping table for those boards, correcting the
FU names for volume and mute controls as well as the terminal names
for jack controls. It also improves build_connector_control() not to
add the directional suffix blindly if the string is given from the
mapping table.

With this patch applied, the new UCM profiles will be effective.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/20200420062036.28567-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk

Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.

Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for MOTU MicroBook IIc

MicroBook IIc operates in UAC2 mode by default. This patch addresses
several issues with it:

- MicroBook II and IIc shares the same USB ID. We can distinguish them
by interface class.
- MaxPacketsOnly attribute is erroneously set in endpoint descriptors.
As a result this card produces noise with all sample rates other than
96 KHz. This also causes issues like IOMMU page faults and other
problems with host controller.
- Sample rate changes takes more than 2 seconds for this device. Clock
validity request returns false during that period, so the clock validity
quirk is required.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200229151815.14199-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: set the interface format after resume on Dell WD19

Recently we found the headset-mic on the Dell Dock WD19 doesn't work
anymore after s3 (s2i or deep), this problem could be workarounded by
closing (pcm_close) the app and then reopening (pcm_open) the app, so
this bug is not easy to be detected by users.

When problem happens, retire_capture_urb() could still be called
periodically, but the size of captured data is always 0, it could be
a firmware bug on the dock. Anyway I found after resuming, the
snd_usb_pcm_prepare() will be called, and if we forcibly run
set_format() to set the interface and its endpoint, the capture
size will be normal again. This problem and workaound also apply to
playback.

To fix it in the kernel, add a quirk to let set_format() run
forcibly once after resume.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add Pioneer DDJ-SX3 PCM quirck

The Pioneer DDJ-SX3 is a plain 12 32bit channel out and 10 channel in
PCM/midi controller. The PCM part is "vendor specific".
It needs the "ignore invalid bsynchaddress" patch as it uses 0 for that.

Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Enable .product_name override for Emagic, Unitor 8.

The Emagic Unitor 8 does not provide iManufacturer and iProduct fields
in its device descriptor. These fields are used by alsa to make build the
device name. Thus uncomment the .product-name in the quirks-table.

Without this change the device shows up as 'USB Device 0x86a:0x01'.

Output of lsusb and amidi:
https://gist.github.com/ensonic/7820a102e91f31575be355da2b6b33bc

Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: sound/usb: Use Media Controller API to share media resources

Media Device Allocator API to allows multiple drivers share a media device.
This API solves a very common use-case for media devices where one physical
device (an USB stick) provides both audio and video. When such media device
exposes a standard USB Audio class, a proprietary Video class, two or more
independent drivers will share a single physical USB bridge. In such cases,
it is necessary to coordinate access to the shared resource.

Using this API, drivers can allocate a media device with the shared struct
device as the key. Once the media device is allocated by a driver, other
drivers can get a reference to it. The media device is released when all
the references are released.

Change the ALSA driver to use the Media Controller API to share media
resources with DVB, and V4L2 drivers on a AU0828 media device.

The Media Controller specific initialization is done after sound card is
registered. ALSA creates Media interface and entity function graph nodes
for Control, Mixer, PCM Playback, and PCM Capture devices.

snd_usb_hw_params() will call Media Controller enable source handler
interface to request the media resource. If resource request is granted,
it will release it from snd_usb_hw_free(). If resource is busy, -EBUSY is
returned.

Media specific cleanup is done in usb_audio_disconnect().

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

ALSA: usb-audio: Add quirk for Focusrite Scarlett Solo

The device reports Synch: Synchronous on the playback interface.
This causes regular audible napping on sample rates that are not multiples
of 1 kHz. Fix to Synch: Asynchronous.

Specifically observed on Focusrite Scarlett Solo 2nd generation. I assume
the first generation model has a different device ID. A first generation
Scarlett 2i2 I was able to test advertised Synch: Asynchronous by default.

For example, with a sample rate of 44100 Hz, a silent sample is played
every 40.96 seconds (likely 44.0 samples instead of 44.1 transmitted per
USB frame on average, 4096 being the size of some internal buffer).
There may be some other bug at play here since this doesn't happen
on other platforms. However, a feedback endpoint is listed and using it
fixes the issue. That is the only change in the quirk,
but I didn't find a way to declare only it.

Tested on two units and on two different computers.

Signed-off-by: Roope Salmi <rpsalmi@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for MOTU MicroBook II

Add an entry to the quirks-table to for usb-audio to recognize the
Microbook II (although it only exposes vendor interfaces). A simple boot
quirk is also implemented to set up the sample rate and make sure that
no audio urbs are sent before the device is ready.

This patch only provides audio playback and capture at 96kHz sample
rate. Notice the following shortcomings:

- The sample rate is currently hardcoded to 96k although the device also
supports 48k and 44.1k.

- The various mixer controls of the MicroBook are not made available.

- The keep-iface control should be on by default because the device
shuts down whenever the altsetting is reset which is usually unwanted.
(I don't know the best way to do this)

- The communication format used by the MicroBook for sample rate setting
and also other setup has been reverse engineered by looking at the
usbmon output while running the windows driver through virtualbox. In
this patch the first byte of every message is set to \0 while in the
observed communications the first byte acts as a "message-counter"
increasing its value with every message sent. Leaving it at \0 does
not seem to affect the device.

Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks

In `create_composite_quirk`, the terminating condition of for loops is
`quirk->ifnum < 0`. So any composite quirks should end with `struct
snd_usb_audio_quirk` object with ifnum < 0.

for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {

.....
}

the data field of Bower's & Wilkins PX headphones usb device device quirks
do not end with {.ifnum = -1}, wihch may result in out-of-bound read.

This Patch fix the bug by adding an ending quirk object.

Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones")
Signed-off-by: Hui Peng <benquike@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock

Like the Dell WD15 Dock, the WD19 Dock (0bda:402e) doens't provide
useful string for the vendor and product names too. In order to share
the UCM with WD15, here we keep the profile_name same as the WD15.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: update quirk for B&W PX to remove microphone

A quirk in snd-usb-audio was added to automate setting sample rate to
4800k and remove the previously exposed nonfunctional microphone for
the Bowers & Wilkins PX:
commit 240a8af929c7c57dcde28682725b29cf8474e8e5
https://lore.kernel.org/patchwork/patch/919689/

However the headphones where updated shortly after that to remove the
unintentional microphone functionality. I guess because of this the
headphones now crash when connecting them via USB while the quirk is
active. Dmesg:

snd-usb-audio: probe of 2-3:1.0 failed with error -22
usb 2-3: 2:1: cannot get min/max values for control 2 (id 2)

This patch removes the microfone and allows the headphones to connect
and work out of the box. It is based on the current mainline kernel
and successfully applied an tested on my machine (4.18.10.arch1-1).

Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones")
Signed-off-by: Nicolas Huaman <nicolas@herochao.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro

AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC()
for expanding idVendor and idProduct fields. However, the latter
macro adds also match_flags and bInterfaceClass, which are different
from the values AU0828_DEVICE() macro sets after that.

For fixing them, just expand idVendor and idProduct fields manually in
AU0828_DEVICE().

This fixes sparse warnings like:
sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Disable the quirk for Nura headset

The commit 33193dca671c ("ALSA: usb-audio: Add a quirk for Nura's
first gen headset") added a quirk for Nura headset with USB ID
0a12:1243, with a hope that it doesn't conflict with others.
Unfortunately, other devices (e.g. Philips Wecall) with the very same
ID got broken by this change, spewing an error like:
usb 2-1.8.2: 2:1: cannot set freq 48000 to ep 0x3

Until we find a proper solution, fix the regression at first by
disabling the added quirk entry.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199905
Fixes: 33193dca671c ("ALSA: usb-audio: Add a quirk for Nura's first gen headset")
Reviewed-by: Martin Peres <martin.peres@free.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Give proper vendor/product name for Dell WD15 Dock

Dell WD15 Dock with 0bda:4014 doesn't give any useful strings for the
vendor and the product names. Name them more specifically via quirk,
as well as the UCM profile name.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add a quirck for B&W PX headphones

The capture interface doesn't work and the playback interface only
supports 48 kHz sampling rate even though it advertises more rates.

Signed-off-by: Erik Veijola <erik.veijola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add a quirk for Nura's first gen headset

The capture interface does not work, and the playback interface
actually supports only 48kHz unlike what is advertised (44.1, 32, 22,
16, 8).

The only unknown here is if there are other devices that use the same
product ID, but given that this ID is currently unknown, I would assume
it is specially allocated for the nura headset.

Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Syntek STK1160

The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves
the issue reported on the mailing list
(http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes
bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071).

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[media] Revert "[media] sound/usb: Use Media Controller API to share media resources"

Unfortunately, this patch caused several regressions at au0828 and
snd-usb-audio, like this one:
https://bugzilla.kernel.org/show_bug.cgi?id=115561

It also showed several troubles at the MC core that handles pretty
poorly the memory protections and data lifetime management.

So, better to revert it and fix the core before reapplying this
change.

This reverts commit aebb2b89bff0 ("[media] sound/usb: Use Media
Controller API to share media resources")'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sound/usb: Use Media Controller API to share media resources

Change ALSA driver to use Media Controller API to share media resources
with DVB and V4L2 drivers on a AU0828 media device. Media Controller
specific initialization is done after sound card is registered. ALSA
creates Media interface and entity function graph nodes for Control,
Mixer, PCM Playback, and PCM Capture devices.

snd_usb_hw_params() will call Media Controller enable source handler
interface to request the media resource. If resource request is
granted, it will release it from snd_usb_hw_free(). If resource is
busy, -EBUSY is returned.

Media specific cleanup is done in usb_audio_disconnect().

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

ALSA: usb-audio: prevent CH345 multiport output SysEx corruption

The CH345 USB MIDI chip has two output ports. However, they are
multiplexed through one pin, and the number of ports cannot be reduced
even for hardware that implements only one connector, so for those
devices, data sent to either port ends up on the same hardware output.
This becomes a problem when both ports are used at the same time, as
longer MIDI commands (such as SysEx messages) are likely to be
interrupted by messages from the other port, and thus to get lost.

It would not be possible for the driver to detect how many ports the
device actually has, except that in practice, _all_ devices built with
the CH345 have only one port. So we can just ignore the device's
descriptors, and hardcode one output port.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: USB-audio: Remove mixer entry from Zoom R16/24 quirk

The device has no mixer (and identifies itself as such), so just skip
the mixer definition.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: USB-audio: Add quirk for Zoom R16/24 playback

The Zoom R16/24 have a nonstandard playback format where each isochronous
packet contains a length descriptor in the first four bytes. (Curiously,
capture data does not contain this and requires no quirk.)

The quirk involves adding the extra length descriptor whenever outgoing
isochronous packets are generated, both in pcm.c (outgoing audio) and
endpoint.c (silent data).

In order to make the quirk as unintrusive as possible, for
pcm.c:prepare_playback_urb(), the isochronous packet descriptors are
initially set up in the same way no matter if the quirk is enabled or not.
Once it is time to actually copy the data into the outgoing packet buffer
(together with the added length descriptors) the isochronous descriptors
are adjusted in order take the increased payload length into account.

For endpoint.c:prepare_silent_urb() it makes more sense to modify the
actual function, partly because the function is less complex to start with
and partly because it is not as time-critical as prepare_playback_urb()
(whose bulk is run with interrupts disabled), so the (minute) additional
time spent in the non-quirk case is motivated by the simplicity of having
a single function for all cases.

The quirk is controlled by the new tx_length_quirk member in struct
snd_usb_substream and struct snd_usb_audio, which is conveyed to pcm.c
and endpoint.c from quirks.c in a similar manner to the txfr_quirk member
in the same structs.

In contrast to txfr_quirk however, the quirk is enabled directly in
quirks.c:create_standard_audio_quirk() by checking the USB ID in that
function. Another option would be to introduce a new
QUIRK_AUDIO_ZOOM_INTERFACE or somesuch, which would have made the quirk
very plain to see in the quirk table, but it was felt that the additional
code needed to implement it this way would just make the implementation
more complex with no real gain.

Tested with a Zoom R16, both by doing capture and playback separately
using arecord and aplay (8 channel capture and 2 channel playback,
respectively), as well as capture and playback together using Ardour, as
well as Audacity and Qtractor together with jackd.

The R24 is reportedly compatible with the R16 when used as an audio
interface. Both devices share the same USB ID and have the same number of
inputs (8) and outputs (2). Therefore "R16/24" is mentioned throughout the
patch.

Regression tested using an Edirol UA-5 in both class compliant (16-bit)
and "advanced" (24 bit, forces the use of quirks) modes.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Tested-by: Panu Matilainen <pmatilai@laiskiainen.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: USB-audio: Add support for Novation Nocturn MIDIcontrol surface

The Nocturn needs the MIDI_RAW_BYTES quirk, like other Novation devices.

Tested that the Nocturn shows up in aconnect, and that it can be used
as a control surface (using the xtor synthesizer patch editor).

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4

The Steinberg MI2 and MI4 interfaces are compatible with the USB class
audio spec, but the MIDI part of the devices is reported as a vendor
specific interface.

This patch adds entries to quirks-table.h to recognize the MIDI
endpoints. Audio functionality was already working and is unaffected by
this change.

Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Albert Huitsing <albert@huitsing.nl>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix audio output on Roland SC-D70 sound module

Roland SC-D70 reports its device class as vendor specific class and
the quirk QUIRK_AUDIO_FIXED_ENDPOINT was used for audio output.

In the quirks table the sampling rate was hard-coded to 44100 Hz
and therefore not worked when the sound module was in 48000 Hz mode.

In this change the quirk is changed to QUIRK_AUDIO_STANDARD_INTERFACE
but as the sound module reports incorrect bSubframeSize in its
descriptors, additional change is made in format.c to detect it and
to override it (which uses the existing code for Edirol SD-90).

Tested both when the sound module was in 44100 Hz mode and 48000 Hz
mode and both audio input and output. MIDI related part of the driver
is not touched.

Signed-off-by: Takamichi Horikawa <takamichiho@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: snd-usb: add quirks for Roland UA-22

The device complies to the UAC1 standard but hides that fact with
proprietary descriptors. The autodetect quirk for Roland devices
catches the audio interface but misses the MIDI part, so a specific
quirk is needed.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Rafa Lafuente <rafalafuente@gmail.com>
Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Akai MPC Element USB MIDI controller

The Akai MPC Element incorrectly reports its bInterfaceClass as 255, but
otherwise implements the USB MIDI spec correctly.

This adds a quirks-table.h entry which allows the device to be
recognized as a standard USB MIDI device.

Signed-off-by: Paul Bonser <misterpib@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Zoom R16/24 capture and midi interfaces

This makes the midi interface and capture work out of the box with
R16 (and presumably R24 too but untested). Playback stream would also
seem to function fine except for one caveat: no sound is produced,
so it is disabled for now. Mixer descriptors are garbage and will
require further quirks to enable functionality, also disabled here.

Signed-off-by: Panu Matilainen <pmatilai@laiskiainen.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Revert "ALSA: usb-audio: Add quirk for Focusrite Scarlett

This reverts commit 1762a59d8e8b5e99f6f4a0f292b40f3cacb108ba.

This quirk is not needed because support for the Scarlett mixers will be added.

Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add duplex mode for Digidesign Mbox 1 and enable mixer

This patch provides duplex support for the Digidesign Mbox 1 sound
card and has been a work in progress for about a year.
Users have confirmed on my website that previous versions of this patch
have worked on the hardware and I have been testing extensively.

It also enables the mixer control for providing clock source
selector based on the previous patch.
The sample rate has been hardcoded to 48kHz because it works better with
the S/PDIF sync mode when the sample rate is locked. This is the
highest rate that the device supports and no loss of functionality
is observed by restricting the sample rate apart from the inability to selec
a lower rate.

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[media] sound: Update au0828 quirks table

The au0828 quirks table is currently not in sync with the au0828
media driver.

Syncronize it and put them on the same order as found at au0828
driver, as all the au0828 devices with analog TV need the
same quirks.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sound: simplify au0828 quirk table

Add a macro to simplify au0828 quirk table. That makes easier
to check it against the USB IDs at drivers/media/usb/au0828/au0828-cards.c.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

ALSA: usb-audio: Add support for Steinberg UR22 USB interface

Adding support for Steinberg UR22 USB interface via quirks table patch

See Ubuntu bug report:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244
Also see threads:
http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917
http://www.steinberg.net/forums/viewtopic.php?t=62290

Tested by at least 4 people judging by the threads.
Did not test MIDI interface, but audio output and capture both are
functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123
Patch applied to 3.13 Ubuntu kernel works well enough for daily use.

Signed-off-by: Vlad Catoi <vladcatoi@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: fix BOSS ME-25 MIDI regression

The BOSS ME-25 turns out not to have any useful descriptors in its MIDI
interface, so its needs a quirk entry after all.

Reported-and-tested-by: Kees van Veen <kees.vanveen@gmail.com>
Fixes: 8e5ced83dd1c ("ALSA: usb-audio: remove superfluous Roland quirks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: snd-usb: re-order some quirk entries

No code change, just a cosmetic cleanup to keep entries ordered by the
device ID within a block of unique vendor IDs.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Focusrite Saffire 6 USB

Signed-off-by: Eduard Gilmutdinov <edgilmutdinov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add Audio Advantage Micro II

This patch is adding extensive support (beside standard usb audio class)
for Audio Advantage Micro II usb sound card.
Features included:
- Access to AES bits (so now sending the IEC61937 compliant stream is
possible).
- Mixer SPDIF control added to turn on/off the optical transmitter.

Signed-off-by: Przemek Rudy <prudy1@o2.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE

The Roland Quad/Octo-Capture devices use some unknown vendor-specific
mechanism to switch sample rates (and to manage other controls). To
prevent the driver from attempting to use any other than the default
44.1 kHz sample rate, use quirks to hide the other alternate settings.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

ALSA: usb-audio: remove superfluous Roland quirks

Remove all quirks that are no longer needed now that the generic Roland
quirks can handle the vendor-specific descriptors correctly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

ALSA: usb-audio: add support for many Roland/Yamaha devices

Add quirks to detect the various vendor-specific descriptors used by
Roland and Yamaha in most of their recent USB audio and MIDI devices.

Together with the previous patch, this should add audio/MIDI support for
the following USB devices:
- Edirol motion dive .tokyo performance package
- Roland MC-808 Synthesizer
- Roland BK-7m Synthesizer
- Roland VIMA JM-5/8 Synthesizer
- Roland SP-555 Sequencer
- Roland V-Synth GT Synthesizer
- Roland Music Atelier AT-75/100/300/350C/500/800/900/900C Organ
- Edirol V-Mixer M-200i/300/380/400/480/R-1000
- BOSS GT-10B Effects Processor
- Roland Fantom G6/G7/G8 Keyboard
- Cakewalk Sonar V-Studio 20/100/700 Audio Interface
- Roland GW-8 Keyboard
- Roland AX-Synth Keyboard
- Roland JUNO-Di/STAGE/Gi Keyboard
- Roland VB-99 Effects Processor
- Cakewalk UM-2G MIDI Interface
- Roland A-500S Keyboard
- Roland SD-50 Synthesizer
- Roland OCTAPAD SPD-30 Controller
- Roland Lucina AX-09 Synthesizer
- BOSS BR-800 Digital Recorder
- Roland DUO/TRI-CAPTURE (EX) Audio Interface
- BOSS RC-300 Loop Station
- Roland JUPITER-50/80 Keyboard
- Roland R-26 Recorder
- Roland SPD-SX Controller
- BOSS JS-10 Audio Player
- Roland TD-11/15/30 Drum Module
- Roland A-49/88 Keyboard
- Roland INTEGRA-7 Synthesizer
- Roland R-88 Recorder

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface

... instead of applying to all interfaces.

Reference: http://forums.gentoo.org/viewtopic-p-6886404.html

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: fix Roland/Cakewalk UM-3G support

Commit 927c9423dd5f2d1c0b93d5e694ab84b4a5559713 (ALSA: usb-audio: add
Edirol UM-3G support) used a wrong quirk type, which would make the
driver refuse to attach with the error message "MIDIStreaming interface
descriptor not found".

Cc: <stable@vger.kernel.org> # 3.3 and later
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: USB quirk for Yamaha THR10C

This patch adds a USB quirk for the Yamaha THR10C amp.

Signed-off-by: Trulan Martin <trulanm@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: USB quirk for Yamaha THR5A

This patch adds a USB quirk for the Yamaha THR5A amp.

Signed-off-by: Trulan Martin <trulanm@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: USB quirk for Yamaha THR10

This patch adds a USB quirk for the Yamaha THR10 amp.

Signed-off-by: Trulan Martin <trulanm@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Trust fields given in the quirk

The maxpacksize field is given in some quirks, but it gets ignored (in
favour of wMaxPacketSize from the first endpoint.) This patch favours
the one in the quirk.

Digidesign Mbox and Mbox 2 are the only affected quirks and the devices
are assumed to be working without this patch. So for safety against the
values in the quirk being incorrect, remove them.

The datainterval is also ignored but there are not currently any quirks
which choose to override this.

Cc: Damien Zammit <damien@zamaudio.com>
Cc: Chris J Arges <christopherarges@gmail.com>
Signed-off-by: Mark Hills <mark@xwax.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Playback and MIDI support for Novation Twitch DJ controller

The hardware also has a PCM capture device which is not implemented in
this patch.

It may be possible to generalise this to Saffire 6 USB support and some
of the other Focusrite interfaces, but as I don't have access to these
devices we should wait until capture support is working first.

Capture support is not implemented because the code assumes the endpoint
to have its own interface (instead, it shares the interface with playback)
and some thought will be needed to lift this limitation.

Signed-off-by: Mark Hills <mark@xwax.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add support for M-Audio FT C600

Adds quirks and mixer support for the M-Audio Fast Track C600 USB
audio interface. This device is very similar to the C400 - the C600
simply has some more inputs and outputs, so the existing C400 support
is extended to support this device as well.

Signed-off-by: Matt Gruskin <matthew.gruskin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: fix Roland A-PRO support

The quirk for the Roland/Cakewalk A-PRO keyboards accidentally used the
wrong interface number, which prevented the driver from attaching to the
device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.37+ <stable@vger.kernel.org>

ALSA: usb-audio: correct M-Audio C400 clock source quirk

Taking another look at the C400 descriptors, I see now that there is
a clock selector (0x80) for this device.
Right now, the clock source points to the internal clock (0x81), which
is also valid. When the external clock source (0x82) is selected in the
mixer, and the rates mismatch (if it's free-running it is fixed to
48KHz), xruns will occur.

Set the clock ID to the clock selector unit (0x81), which then
allows the validation code to function correctly.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk

This patch is based on 3.8-rc1. It fixes two things:
1) A kernel panic caused by incorrect allocation of a u8 variable
"bootresponse".
2) A noisy dmesg (urb status -32) caused by broken pipe to an
invalid midi endpoint.

It is also a little cleaner because there is no need for a new
QUIRK_MIDI type as suggested by kernel developers, since the device
follows exactly the MIDIMAN protocol.

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks

Support the Creative BT-D1 Bluetooth USB audio device. Before this
patch, Linux had trouble finding the correct USB descriptors and bailed
out with these messages:

no or invalid class specific endpoint descriptor

Now it still prints these messages on hotplug:

snd-usb-audio: probe of ...:1.0 failed with error -5
snd-usb-audio: probe of ...:1.2 failed with error -5
snd-usb-audio: probe of ...:1.3 failed with error -5

But the device works correctly, including the HID support.

The patch is diff'ed against 3.8-rc1 but should apply to older kernels
as well.

Signed-off-by: Alexander Schremmer <alex@alexanderweb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:

This patch is the result of a lot of trial and error, since there are no specs
available for the device.

Full duplex support is provided, i.e. playback and recording in stereo.
The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the
device supports. Also, MIDI in and MIDI out both work.

Users will notice that the S/PDIF light also flashes when playback or recording
is active. I believe this means that S/PDIF input/output is simultaneously
activated with the analogue i/o during use.
But this particular functionality remains untested.

Note that this particular version of the patch is so far untested on the
physical hardware because I have not compiled a full kernel with the changes.
However, extensive testing has been done by many users of the hardware
who believe other versions of my patch have worked since circa 2009.

[Modified to make a function static by tiwai]

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: ignore-quirk for HP Wireless Audio

As Joe Cooper <swelljoe@gmail.com> reported, "On most HP Envy laptops
the snd-usb-audio module causes the system to become unresponsive and
Gnome Shell 3 to crash.".
See also:
http://mailman.alsa-project.org/pipermail/alsa-devel/2012-December/057729.html

Add a quirk to ignore this device (for now) to solve the instability
issue and allow other USB audio devices to be used.

Reported-by: Joe Cooper <swelljoe@gmail.com>
Tested-by: Isaac Smith <hunternet93@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: M-Audio Fast Track C400 quirks table

Adds a quirks table for the M-Audio Fast Track C400.
Thanks to Clemens Ladisch <clemens@ladisch.de> for pointing out that
the table must be sorted.

Based on the following patch from the alsa-devel list:
http://mailman.alsa-project.org/pipermail/alsa-devel/2012-May/051676.html

See also:
http://mailman.alsa-project.org/pipermail/alsa-devel/2012-April/051219.html

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Focusrite Scarlett 18i6

Probing this device currently fails in snd_usb_audio_probe() because
the call to snd_usb_create_mixer() fails. This is due to unknown or
non-standard interface descriptor subtypes in parse_audio_unit():

usbaudio: unit 51: unexpected type 0x09
snd-usb-audio: probe of 1-8:1.0 failed with error -5

Some people are working around this by recompiling usb-audio with the
call to snd_usb_create_mixer() commented out. It would be nice to
avoid that.

While the best idea would be to look into the mixer creation failure,
a reasonable short-term solution is to use quirks to only probe the
trouble-free interfaces. This allows audio and MIDI interfaces to be
used without any obvious issues.

Interface 0 is the main one to ignore. It contains lots of
control-fu, including the unexpected interface descriptor subtypes.
Interface 5 is for firmware updates and I'm not sure how to get
support for this. Interface 3 is some sort of control interface that
I don't understand:

Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 9
bInCollection 1
baInterfaceNr( 0) 1

Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for Reloop Play

The Reloop Audio needs a fixed endpoint quirk with S24_3LE format and
UAC_EP_CS_ATTR_SAMPLE_RATE attribute.

Signed-off-by: Didier Villevalois <ptitjes@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: USB audio quirk for Roland VG-99 advanced mode

Without this quirk the VG-99 will work in standard mode (set under
USB on System menu page 2) giving 16 bits at 44.1 Khz audio in/out
but no midi, and is not recognised when set to advanced mode.

After applying this, I can also use the VG-99 in advanced mode: 24
24 bits audio in/out at 44.1 Khz, and midi in/out. Sysex is so far
untested.

In standard mode, the device appears with ID 0x00b3, so the
behaviour isn't affected by this quirk.

Thanks to Clemens Ladisch for simplifying and correcting my initial
attempt!

Signed-off-by: Pete Leigh <pete.leigh@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add TASCAM US122 MKII playback

Added quirk to provide at least playback-only support.

Signed-off-by: Oto Petrik <oto.petrik@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: USB: Support for (original) Xbox Communicator

Added support for Xbox Communicator to USB quirks.

Signed-off-by: Marko Friedemann <mfr@bmx-chemnitz.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add BOSS GT-100 support

Reported-by: John McFarland <mcfarljm@gmail.com>
Tested-by: John McFarland <mcfarljm@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Edirol UM-3G support

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Yamaha MOX6/MOX8 support

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: snd-usb: added VOX ToneLab ST midi handling

Signed-off-by: Sergiusz Urbaniak <sergiusz.urbaniak@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer

Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon
Roland SH-201 table entry as template. USB MIDI and audio was tested
with Muse and Audacity.

Signed-off-by: John F Leach <jfleach@jfleach.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Added support for Roland UM-ONE midi-usb interface

Roland UM-ONE midi usb interface differs from Roland UM-1.

Signed-off-by: Daniele Guerrieri <d.guerrieri@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Starr Labs USB MIDI support

Add support for Starr Labs USB MIDI devices such as the Z7S, which are
based on an FTDI serial UART chip.

Based on a patch by Daniel Mack.

Signed-off-by: Kristian Amlie <kristian@amlie.name>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio - Add quirk for BOSS Micro BR-80

Signed-off-by: Kazutomo Yoshii <kazutomo.yoshii@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio - add quirk for Keith McMillen StringPort

Signed-off-by: Miller Puckette <msp@ucsd.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio - Add quirk for Roland / BOSS BR-800

Add support for Roland/BOSS BR-800 (0582:011e) to snd-usb-audio driver.

This allows playback and recording, which has been tested and found to
work. The third interface should be MIDI (MTC/SMPTE?) for DAW interface
and is set as per ME-25, but this has not been tested. SDHC card access
is already supported by usb-storage for Backup/Rhythm Editor/Wave
Convertor mode which should not conflict with this.

Signed-off-by: David G Turner <dgturner@iee.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: more control quirks for M-Audio FastTrack devices

Make use of the freshly introduced methods to re-use standard mixer
handling and add some controls that are hidden but implemented in a
standard conform way on M-Audio's FastTrack devices.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Original-code-by: Felix Homann <linuxaudio@showlabor.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: handle "Fast Track Ultra" with USB_DEVICE_VENDOR_SPEC()

That way, the class compliant MIDI interface is also handled.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Grant Diffey <gdiffey@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add quirks for Roland GR-55

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Jeffrey Scott Flesher <jeffrey.scott.flesher@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirk for KORG PANDORA PX5D MIDI interface

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Frédéric Jaume <frederic.jaume@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: remove invalid extra mixers for Komplete Audio 6

This was a flaw in the reading of the spec tables - Native Instrument's
"Komplete Audio 6" device has no such extra controls.

This patch also fixes the device name in two comments.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Add quirks for Audio Kontrol 6

This new device by Native Instruments is also compliant to the USB
standard v2.0, but hides this detail at when connected.

It needs the same boot quirks than other models, and also has two
non-class-compliant mixer controls.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio - Support for Boss JS-8 Jam Station

Signed-off-by: Keith A. Milner <maillist@superlative.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Cakewalk UM-1G support

Add a quirk for the Cakewalk UM-1G USB MIDI interface in
"advanced driver" mode. (It already works in standard mode.)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add support for Native Instruments MK2 devices

The MK2 generation of Native Instruments' sound cards are in fact
compliant to the USB audio standard of version 2 and other approved USB
standards. However, they come up as vendor-specific device when first
connected but can be told to come up with a new set of descriptors
upon their next enumeration. The interfaces announced by the new
descriptors will be handled by the kernel's class drivers. This is done
by issuing a vendor specific device request and sending the device to
reset.

There are also some vendor-specific USB requests for some mixer elements
that can't be exported in a standard compliant way. The driver now
supports them with quirks handling mechanisms.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usbaudio - Enable the E-MU 0204 USB

Signed-off-by: Joseph Teichman <josteich@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Edirol SD-90 PCM support

Add support for the 24-bit audio I/Os of the Edirol SD-90 interface.

Reported-any-tested-by: Jim Grusendorf <alsa-user@grusendorf.ca>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Novation Launchpad support

Add a quirk entry for the Novation Launchpad USB MIDI controller.

QUIRK_MIDI_FASTLANE gets renamed to *_RAW_BYTES because this quirk type
is now shared by different devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Jakob Flierl <jakob.flierl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add more Yamaha USB MIDI devices

Add quirks for more devices (according to driver V.3.0.4-2).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add BOSS ME-25 support

Add a quirk to make the BOSS ME-25 work.
Many thanks to Kees van Veen.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Roland A-PRO support

Add a quirk for the Roland/Cakewalk A-300PRO/A-500PRO/A-800PRO keyboards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Edirol PCR-1 PCM support

Add a quirk for the other logical device of the PCR-1 so that not only
the MIDI interface but also the audio interface works.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: fix Fast Track Ultra (8R) 44.1 sample rates

The M-Audio Fast Track Ultra series devices did not play sound correctly
at 44.1/88.2 kHz. Changing the output endpoint attribute to adaptive
fixes this.

Signed-off-by: Felix Homann <fexpop@web.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb - Correct audio problem for Hauppage HVR-850 and others rel. to urb data align

Match usb ids in usb/quirks-table.h for some Hauppage HVR-950Q models
and for the HVR850 model to those ids at the end of au0828-cards.c

Thanks to nhJm449 for pointing out the problem.

Signed-off-by: John S Gruber <JohnSGruber@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add support for Akai MPD16

The decoding/encoding is based on own reverse-engineering. Both control and
data ports are handled. Writing to control port supports SysEx events only,
as this is the only type of messages that MPD16 recognizes.

Signed-off-by: Krzysztof Foltman <wdev@foltman.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usbaudio: Add basic support for M-Audio Fast Track Ultra series

This adds basic support for M-Audio's Fast Track Ultra series of USB
audio interfaces. It is a refactored version of the patch Clemens
Ladisch posted some time ago. Neither playback nor capturing work
properly at 44100 Hz (don't know why).
The other sampling rates work properly. There's no support for the DSP
mixer, yet.

Signed-off-by: Felix Homann <fexpop@web.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: support multiple formats with audio class v2 devices

Change the parser to correctly handle v2 descriptors with multiple
format bits set.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: use a format bitmask per alternate setting

In preparation for USB audio 2.0 support, change the audioformat
structure so that it uses a bitmask to specify possible formats.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: refactor code

Clean up the usb audio driver by factoring out a lot of functions to
separate files. Code for procfs, quirks, urbs, format parsers etc all
got a new home now.

Moved almost all special quirk handling to quirks.c and introduced new
generic functions to handle them, so the exceptions do not pollute the
whole driver.

Renamed usbaudio.c to card.c because this is what it actually does now.
Renamed usbmidi.c to midi.c for namespace clarity.
Removed more things from usbaudio.h.

The non-standard drivers were adopted accordingly.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>