#
02004449 |
|
23-Jun-2022 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
ASoC: wm*: Remove now redundant non_legacy_dai_naming flag The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-66-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
26d3c16e |
|
08-Jul-2020 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: codecs: wm*: merge .digital_mute() into .mute_stream() snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87v9ixwiwr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
2cb7802b |
|
02-Jul-2020 |
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> |
ASoC: codecs: wm8400: remove unused variables Fix W=1 warning by removing unused variables Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200702163633.162508-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
6d75dfc3 |
|
15-Jun-2020 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: codecs: wm*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87eeqf4mcl.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
2874c5fd |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
822e70a8 |
|
16-Mar-2018 |
weiyongjun (A) <weiyongjun1@huawei.com> |
ASoC: wm8400: Use devm_snd_soc_register_component() Since the remove callback is removed, the snd_soc_unregister_component() is missing when remove device. Using devm_snd_soc_register_component() instead of snd_soc_register_component(). Fixes: 10dc44c6462d ("ASoC: wm8400: replace codec to component") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
10dc44c6 |
|
28-Jan-2018 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: wm8400: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
74c76497 |
|
27-Nov-2017 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: use snd_soc_component_init_regmap() on wm8400 To setup regmap, ALSA SoC has snd_soc_component_init_regmap() and .get_regmap. But these are duplicated feature. Let's use snd_soc_component_init_regmap() and remove .get_regmap Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
f802d6c0 |
|
31-Aug-2016 |
Julia Lawall <Julia.Lawall@lip6.fr> |
ASoC: constify snd_soc_codec_driver structures Check for snd_soc_codec_driver structures that are only passed to snd_soc_register_codec or memcpy (2nd arg), for which the corresponding parameters are declared const. Declare as const snd_soc_codec_driver structures that have these properties. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_soc_codec_driver i@p = { ... }; @ok@ identifier r.i; expression e1,e2,e3; position p; @@ ( snd_soc_register_codec(e1,&i@p,e2,e3) | memcpy(e1,&i@p,e2) ) @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_soc_codec_driver i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
7b5deb2d |
|
08-Aug-2016 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: codec duplicated callback function goes to component on wm8400 codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
0b65e6c7 |
|
02-Aug-2015 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: wm8400: Don't use range container for TLV with one entry For TLVs with only a single entry it is not necessary to use a range container. Use DECLARE_TLV_DB_SCALE() directly instead of a combination of TLV_DB_RANGE_HEAD() and TLV_DB_SCALE_ITEM(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
cf25c66c |
|
01-Jun-2015 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: wm8400: Replace direct snd_soc_codec dapm field access The dapm field of the snd_soc_codec struct is eventually going to be removed, in preparation for this replace all manual access to codec->dapm.bias_level with snd_soc_codec_get_bias_level(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
f4bf8d77 |
|
27-Apr-2015 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: Move bias level update to the core All drivers have the same line at the end of the set_bias_level callback to update the bias_level state. Move this update into snd_soc_dapm_force_bias_level() and remove them from the drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
a8c696f1 |
|
13-Jan-2015 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: wm8400: Replace w->codec snd_soc_dapm_to_codec(w->dapm) The codec field of the snd_soc_widget struct is eventually going to be removed, use snd_soc_dapm_to_codec(w->dapm) instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
098f6f17 |
|
23-Nov-2014 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: wm8400: Cleanup manual bias level transitions Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual asynchronous transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Also running this asynchronously has the problem of potential race conditions with the core. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
c756e83d |
|
20-Oct-2014 |
Wolfram Sang <wsa@kernel.org> |
ASoC: codecs: drop owner assignment from platform_drivers A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
#
6fe12c2f |
|
30-Jul-2014 |
Mark Brown <broonie@linaro.org> |
ASoC: wm8400: Convert to params_width() The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
|
#
ea53bf77 |
|
18-Mar-2014 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: Add snd_soc_kcontrol_codec() helper function For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
7a34b1c1 |
|
02-Apr-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ASoC: codec: fix the sparse check warnings. Some thing Likes: reproduce: make C=1 CF=-D__CHECK_ENDIAN__ sparse warnings: (new ones prefixed by >>) >> sound/soc/codecs/wm8997.c:1084:15: sparse: symbol \ 'wm8997_get_regmap' was not declared. Should it be static? Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
4504bade |
|
25-Mar-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ASoC: wm8400: Remove the set_cache_io() entirely from ASoC probe. As we can set the CODEC I/O while snd_soc_register_codec(), so the calling of set_cache_io() from CODEC ASoC probe could be removed entirely. And then we can set the CODEC I/O in the device probe instead of CODEC ASoC probe as earily as possible. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
092eba93 |
|
10-Mar-2014 |
Xiubo Li <Li.Xiubo@freescale.com> |
ASoC: io: New signature for snd_soc_codec_set_cache_io() Now that all users have been converted to regmap and the config.reg_bits and config.val_bits can be setted by each user through regmap core API. So these two params are redundant here. Since the only control type that left is SND_SOC_REGMAP, so remove it. Drop the control params and add struct regmap *regmap to simplify the code. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
898b48eb |
|
18-Feb-2014 |
Takashi Iwai <tiwai@suse.de> |
ASoC: wm8400: Fix the wrong number of enum items wm8400 codec driver has a few places wrongly defining the number of enum items. Use SOC_ENUM_SINGLE_DECL() macro and they are automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
b8cc4151 |
|
31-Aug-2013 |
Mark Brown <broonie@linaro.org> |
ASoC: wm8400: Use regmap for I/O Since we no longer have a fake register to simulate we can use the framework for I/O. Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
37c83edf |
|
31-Aug-2013 |
Mark Brown <broonie@linaro.org> |
ASoC: wm8400: Use supplies to manage input power Rather than using a fake register to manage input power create some supply widgets and use those. Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
a44b5177 |
|
19-Jun-2013 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: wm8400: Use SOC_SINGLE_EXT_TLV() instead of open-coding it Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
|
#
7a79e94e |
|
07-Dec-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
ASoC: codecs: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
95a5b240 |
|
26-Nov-2012 |
Sachin Kamat <sachin.kamat@linaro.org> |
ASoC: wm8400: Use devm_regulator_bulk_get devm_regulator_bulk_get() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
656baaeb |
|
22-May-2012 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: codecs: Refresh copyrights for Wolfson drivers Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
5fa87d34 |
|
05-Apr-2012 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: wm8400: Use snd_soc_write() and snd_soc_read() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
e6968a17 |
|
04-Apr-2012 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: codecs: Remove rtd->codec usage from CODEC drivers In order to support CODEC<->CODEC links remove the assumption that there is only a single CODEC on a DAI link by removing the use of the CODEC pointer in the rtd from the CODEC drivers. They are already being passed their DAI whenever they are passed an rtd and can get the CODEC from there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
b4505ab1 |
|
03-Dec-2011 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Convert WM8400 to table based DAPM and control init Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
b903c0ed |
|
03-Dec-2011 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Convert WM8400 to devm_kzalloc() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
84b315ee |
|
02-Dec-2011 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: Drop unused state parameter from CODEC suspend callback The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
5bbcc3c0 |
|
23-Nov-2011 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Convert CODEC drivers to module_platform_driver Factors out a bit of boilerplate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
85e7652d |
|
23-Nov-2011 |
Lars-Peter Clausen <lars@metafoo.de> |
ASoC: Constify snd_soc_dai_ops structs Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
3ff51c85 |
|
27-Oct-2011 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Convert wm8400 MICBIAS to a supply widget Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
1d533de9 |
|
22-Oct-2011 |
Axel Lin <axel.lin@gmail.com> |
ASoC: wm8400: Fix setting Fout clock divider for FLL Control 4 What we want here is to clear the WM8400_FLL_OUTDIV_MASK bits then OR with factors.outdiv. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
1a8e8d22 |
|
13-Oct-2011 |
Axel Lin <axel.lin@gmail.com> |
ASoC: wm8400: Fix wrong bit setting for WM8400_POWER_MANAGEMENT_2 If (fakepower & ((1 << WM8400_INMIXR_PWR) | (1 << WM8400_AINRMUX_PWR))) is false, we should clear WM8400_AINR_ENA bits instead of WM8400_AINL_ENA. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
e45be4b5 |
|
11-May-2011 |
Samuel Ortiz <sameo@linux.intel.com> |
mfd: Use mfd cell platform_data for wm8400 cells platform bits With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
dab1547a |
|
17-Feb-2011 |
Andres Salomon <dilinger@queued.net> |
asoc: wm8400-codec: Use mfd_data instead of driver_data Use mfd_data for passing information from mfd drivers to soc clients. The mfd_cell's driver_data field is being phased out. Clients that were using driver_data now access .mfd_data via mfd_get_data(). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
#
505fb824 |
|
21-Nov-2010 |
Jarkko Nikula <jhnikula@gmail.com> |
ASoC: Do not include soc-dapm.h There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
ce6120cc |
|
05-Nov-2010 |
Liam Girdwood <lrg@slimlogic.co.uk> |
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
f0fba2ad |
|
17-Mar-2010 |
Liam Girdwood <lrg@slimlogic.co.uk> |
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
#
3351e9fb |
|
25-May-2010 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Fix dB scales for WM8400 These scales should be regular, not linear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
|
#
9cd8bd8a |
|
25-May-2010 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Fix dB scales for WM8400 These scales should be regular, not linear. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
|
#
b2c812e2 |
|
14-Apr-2010 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Add indirection for CODEC private data One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
0a3f5e35 |
|
12-Nov-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Remove redundant snd_soc_dapm_new_widgets() calls The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
4cae37fa |
|
07-Nov-2009 |
Takashi Iwai <tiwai@suse.de> |
ASoC: Remove dead code and labels Remove the dead code and labels "card_err" in the error paths of some codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
fe3e78e0 |
|
03-Nov-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Factor out snd_soc_init_card() snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
d2058b0c |
|
13-Oct-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Remove snd_soc_suspend_device() The PM core will grow pm_link infrastructure in 2.6.33 which can be used to implement the intended functionality of the ASoC-specific device suspend and resume callbacks so drop them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
85488037 |
|
05-Sep-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Add source argument to PLL configuration More and more devices feature PLLs and FLLs with the ability to select between multiple input clocks. In order to better support these devices a new argument, source, has been added to the set_pll() configuration API. Using set_clkdiv() is often difficult due to the need to stop the PLL/FLL before any reconfiguration can be done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
8aa2df53 |
|
17-Jul-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Bodge around GCC 4.4.0 flow analysis bug in GCC 4.4.0 GCC 4.4.0 doesn't appear to be able to spot that we don't apply any FLL configuration if the output frequency is zero. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
b3b50b3f |
|
13-Jun-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Add suspend and resume callbacks to Wolfson CODEC drivers Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
449bd54d |
|
27-May-2009 |
Roel Kluin <roel.kluin@gmail.com> |
ASoC: correct print specifiers for unsigneds Unsigned variables should use `%u' rather than `%d'. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
ae31c1fb |
|
04-May-2009 |
Greg Kroah-Hartman <gregkh@suse.de> |
sound: remove driver_data direct access of struct device In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
31cb31f7 |
|
11-May-2009 |
Roel Kluin <roel.kluin@gmail.com> |
ASoC: remove driver_data direct access of struct device Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
e8523b64 |
|
18-Mar-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Add FLL support for WM8400 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
24a51029 |
|
18-Mar-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Add separate AVDD for WM8400 There is an AVDD supply as well, normally one or more of the other upplies would be tied to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
e3598f6e |
|
18-Mar-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Further optimise WM8400 bias configuration sequence The active discharge does not bring sufficient benefit to justify the lengthy times involved so don't do that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
eb5f6d75 |
|
12-Mar-2009 |
Philipp Zabel <philipp.zabel@gmail.com> |
ASoC: Replace remaining uses of snd_soc_cnew with snd_soc_add_controls. The drivers are basically duplicating the same code over and over. As snd_soc_cnew is going to be made static some time after the next merge window, we might as well convert them now. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
aaf1e176 |
|
10-Mar-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
ASoC: Add initial driver for the WM8400 CODEC The WM8400 is a highly integrated audio CODEC and power management unit intended for mobile multimedia application. This driver supports the primary audio CODEC features, including: - 1W speaker driver - Fully differential headphone output - Up to 4 differential microphone inputs Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|