ASoC: nau8822: Fix incorrect type in assignment and cast to restricted __be16

This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:

sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org

ASoC: nau8822: add speaker Bridge Tied Output configuration

Allow configuring the two loudspeaker outputs as a
single Bridge Tied Load output getting higher output power.

Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230104140412.35575-4-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau*: Remove now redundant non_legacy_dai_naming flag

The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-55-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: Add operation for internal PLL off and on

We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.

After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.

After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.

Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: Don't reconfigure PLL to the same values

When we configure the PLL record the input and output frequency, then if we
get asked to configure the same values again just skip reprogramming the
hardware. This makes things a bit easier to use for machine drivers since
it means they don't need to keep track of if they've programmed the PLL
so much.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603103530.3844527-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: Disable internal PLL if freq_out is zero

After finishing the playback or recording, the machine driver might
call snd_soc_dai_set_pll(codec, pll_id, 0, 0, 0) to stop the internal
PLL, but with the codec driver nau8822, it will print error as below:
nau8822 0-001a: Unsupported input clock 0
fsl-asoc-card sound-nau8822: failed to stop FLL: -22

Refer to the function wm8962_set_fll() in the codec driver wm8962, if
the freq_out is zero, turn off the internal PLL and return 0.

Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-3-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: Add operation for internal PLL off and on

We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.

After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.

After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.

Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8*: use simple i2c probe function

The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.

This avoids scanning the identifier tables during probes.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-8-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau*: sync parameter naming (rate/sample_bits)

This patch syncs naming rule.

- xxx_rates;
+ xxx_rate;

- xxx_samplebits;
+ xxx_sample_bits;

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s8uolgo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: merge .digital_mute() into .mute_stream()

snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream

int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/875zaxxxi4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: rename to snd_soc_component_read()

We need to use snd_soc_component_read()
instead of snd_soc_component_read32()

This patch renames _read32() to _read()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mu534me5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-component: merge snd_soc_component_read() and snd_soc_component_read32()

We had read/write function for Codec, Platform, etc,
but these has been merged into snd_soc_component_read/write().

Internally, it is using regmap or driver function.
In read case, each styles are like below

regmap
ret = regmap_read(..., reg, &val);

driver function
val = xxx->read(..., reg);

Because of this kind of different style, to keep same read style,
when we merged each read function into snd_soc_component_read(),
we created snd_soc_component_read32(), like below.
commit 738b49efe6c6 ("ASoC: add snd_soc_component_read32")

(1) val = snd_soc_component_read32(component, reg);

(2) ret = snd_soc_component_read(component, reg, &val);

Many drivers are using snd_soc_component_read32(), and
some drivers are using snd_soc_component_read() today.

In generally, we don't check read function successes,
because, we will have many other issues at initial timing
if read function didn't work.

Now we can use soc_component_err() when error case.
This means, it is easy to notice if error occurred.

This patch aggressively merge snd_soc_component_read() and _read32(),
and makes snd_soc_component_read/write() as generally style.

This patch do
1) merge snd_soc_component_read() and snd_soc_component_read32()
2) it uses soc_component_err() when error case (easy to notice)
3) keeps read32 for now by #define
4) update snd_soc_component_read() for all drivers

Because _read() user drivers are not too many, this patch changes
all user drivers.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: support master mode

The driver selects the proper BCLK divide through the BCLK and FS
at the hardware parameter when the I2S master mode.

Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: convert to SPDX identifiers

This patch updates license to SPDX-License-Identifier
instead of verbose license text.

Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nau8822: new codec driver

Add driver for NAU88C22.

Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>