#
439590ac |
|
30-Oct-2023 |
Jani Nikula <jani.nikula@intel.com> |
drm/edid: include drm_eld.h only where required Reduce the dependencies on drm_eld.h. Some files might be able to drop the dependency on drm_edid.h too with the direct inclusion of drm_eld.h. Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9f5963ce900d747f3279312c0cd1da599fd83f94.1698747331.git.jani.nikula@intel.com
|
#
025222a9 |
|
18-Dec-2023 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: fix missing report for jack initial status This fixes a problem introduced while fixing ELD reporting with no jack set. Most driver using the hdmi-codec will call the 'plugged_cb' callback directly when registered to report the initial state of the HDMI connector. With the commit mentionned, this occurs before jack is ready and the initial report is lost for platforms actually providing a jack for HDMI. Fix this by storing the hdmi connector status regardless of jack being set or not and report the last status when jack gets set. With this, the initial state is reported correctly even if it is disconnected. This was not done initially and is also a fix. Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe") Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/ Cc: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
15be353d |
|
06-Nov-2023 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: register hpd callback on component probe The HDMI hotplug callback to the hdmi-codec is currently registered when jack is set. The hotplug not only serves to report the ASoC jack state but also to get the ELD. It should be registered when the component probes instead, so it does not depend on the card driver registering a jack for the HDMI to properly report the ELD. Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20231106104013.704356-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
b84b5314 |
|
29-Sep-2023 |
Matthias Reichl <hias@horus.com> |
ASoC: hdmi-codec: Fix broken channel map reporting Commit 4e0871333661 ("ASoC: hdmi-codec: fix channel info for compressed formats") accidentally changed hcp->chmap_idx from ca_id, the CEA channel allocation ID, to idx, the index to the table of channel mappings ordered by preference. This resulted in wrong channel maps being reported to userspace, eg for 5.1 "FL,FR,LFE,FC" was reported instead of the expected "FL,FR,LFE,FC,RL,RR": ~ # speaker-test -c 6 -t sine ... 0 - Front Left 3 - Front Center 1 - Front Right 2 - LFE 4 - Unknown 5 - Unknown ~ # amixer cget iface=PCM,name='Playback Channel Map' | grep ': values' : values=3,4,8,7,0,0,0,0 Switch this back to ca_id in case of PCM audio so the correct channel map is reported again and set it to HDMI_CODEC_CHMAP_IDX_UNKNOWN in case of non-PCM audio so the PCM channel map control returns "Unknown" channels (value 0). Fixes: 4e0871333661 ("ASoC: hdmi-codec: fix channel info for compressed formats") Cc: stable@vger.kernel.org Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20230929195027.97136-1-hias@horus.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
2edc4a2c |
|
08-Aug-2023 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: codecs/hdmi-codec: merge DAI call back functions into ops ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edkd9m4t.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
acd3e625 |
|
08-Aug-2023 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: codecs/hdmi-codec: merge DAI call back functions into ops ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edkd9m4t.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
7b516208 |
|
24-Jun-2023 |
Matthias Reichl <hias@horus.com> |
ASoC: hdmi-codec: fix channel info for compressed formats According to CTA 861 the channel/speaker allocation info in the audio infoframe only applies to uncompressed (PCM) audio streams. The channel count info should indicate the number of channels in the transmitted audio, which usually won't match the number of channels used to transmit the compressed bitstream. Some devices (eg some Sony TVs) will refuse to decode compressed audio if these values are not set correctly. To fix this we can simply set the channel count to 0 (which means "refer to stream header") and set the channel/speaker allocation to 0 as well (which would mean stereo FL/FR for PCM, a safe value all sinks will support) when transmitting compressed audio. Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20230624165232.5751-1-hias@horus.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
4e087133 |
|
24-Jun-2023 |
Matthias Reichl <hias@horus.com> |
ASoC: hdmi-codec: fix channel info for compressed formats According to CTA 861 the channel/speaker allocation info in the audio infoframe only applies to uncompressed (PCM) audio streams. The channel count info should indicate the number of channels in the transmitted audio, which usually won't match the number of channels used to transmit the compressed bitstream. Some devices (eg some Sony TVs) will refuse to decode compressed audio if these values are not set correctly. To fix this we can simply set the channel count to 0 (which means "refer to stream header") and set the channel/speaker allocation to 0 as well (which would mean stereo FL/FR for PCM, a safe value all sinks will support) when transmitting compressed audio. Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20230624165232.5751-1-hias@horus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
e041a2a5 |
|
08-Mar-2023 |
Emil Abildgaard Svendsen <EMAS@bang-olufsen.dk> |
ASoC: hdmi-codec: only startup/shutdown on supported streams Currently only one stream is supported. This isn't usally a problem until you have a multi codec audio card. Because the audio card will run startup and shutdown on both capture and playback streams. So if your hdmi-codec only support either playback or capture. Then ALSA can't open for playback and capture. This patch will ignore if startup and shutdown are called with a non supported stream. Thus, allowing an audio card like this: +-+ cpu1 <--@-| |-> codec1 (HDMI-CODEC) | |<- codec2 (NOT HDMI-CODEC) +-+ Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230309065432.4150700-2-emas@bang-olufsen.dk Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
c59331b3 |
|
30-Jan-2023 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: use helper function Current ASoC has many helper function. This patch use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874js7foqb.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
f77a066f |
|
30-Nov-2022 |
Mark Brown <broonie@kernel.org> |
ASoC: hdmi-codec: Allow playback and capture to be disabled Currently the hdmi-codec driver always registers both playback and capture capabilities but for most systems there's no actual capture capability, usually HDMI is transmit only. Provide platform data which allows the users to indicate what is supported so that we don't end up advertising things to userspace that we can't actually support. In order to avoid breaking existing users the flags in platform data are a bit awkward and specify what should be disabled rather than doing the perhaps more expected thing and defaulting to not supporting capture. Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221130184644.464820-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
985f03ba |
|
08-Sep-2022 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec.c: use devm_kzalloc() for DMA data hdmi-codec.c is using kzalloc(), but we can replace it to devm_kzalloc() and then, we can remove .remove callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/874jxhmjgw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
c90d6054 |
|
22-Aug-2022 |
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> |
ASoC: hdmi-codec: remove unused definitions cppcheck warning: sound/soc/codecs/hdmi-codec.c:24:16: style: struct member 'hdmi_codec_channel_ma`p_table::map' is never used. [unusedStructMember] unsigned char map; /* ALSA API channel map position */ ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Chao Song <chao.song@intel.com> Link: https://lore.kernel.org/r/20220822184239.169757-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
f5f80193 |
|
23-Jun-2022 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
ASoC: hdmi-codec: Remove now redundant non_legacy_dai_naming flag The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-79-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
9f1c8677 |
|
01-Jun-2022 |
Mark Brown <broonie@kernel.org> |
ASoC: hdmi-codec: Update to modern DAI terminology As part of retiring the old defines used to specify DAI formats update the hdmi_codec driver to use the modern names, including the variables in the struct hdmi_codec_daifmt exported to the DRM drivers. In updating this I did note that the only use of this information in DRM drivers is to reject clock provider settings, thinking about what this hardware is doing I rather suspect that there might not be any hardware out there which needs the configuration so it may be worth considering just having hdmi-codec support only clock consumer. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220602103029.3498791-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
6edfed8f |
|
04-May-2022 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
ASoC: hdmi-codec: Remove redundant big endian formats The CODEC already provides the endianness flag on its snd_soc_component_driver structure, specifying it is ambivalent to endian. The core will expand the formats to cover both endian types, as such remove the redundant specification of both endians. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220504170905.332415-8-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
06feec60 |
|
12-Jan-2022 |
Dmitry Osipenko <digetx@gmail.com> |
ASoC: hdmi-codec: Fix OOB memory accesses Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20220112195039.1329-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
e99d7c69 |
|
15-Jun-2021 |
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> |
ASoC: hdmi-codec: make hdmi_codec_controls static This symbol is not used outside of hdmi-codec.c, so marks it static. Fix the following sparse warning: sound/soc/codecs/hdmi-codec.c:750:25: warning: symbol 'hdmi_codec_controls' was not declared. Should it be static? Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1623822941-3077-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
2fef64ee |
|
25-May-2021 |
Maxime Ripard <maxime@cerno.tech> |
ASoC: hdmi-codec: Add a prepare hook The IEC958 status bit is usually set by the userspace after hw_params has been called, so in order to use whatever is set by the userspace, we need to implement the prepare hook. Let's add it to the hdmi_codec_ops, and mandate that either prepare or hw_params is implemented. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210525132354.297468-6-maxime@cerno.tech
|
#
7a8e1d44 |
|
25-May-2021 |
Maxime Ripard <maxime@cerno.tech> |
ASoC: hdmi-codec: Add iec958 controls The IEC958 status bits can be exposed and modified by the userspace through dedicated ALSA controls. This patch implements those controls for the hdmi-codec driver. It relies on a default value being setup at probe time that can later be overridden by the control put. The hw_params callback is then called with a buffer filled with the proper bits for the current parameters being passed on so the underlying driver can just reuse those bits as is. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210525132354.297468-5-maxime@cerno.tech
|
#
366b45b9 |
|
25-May-2021 |
Maxime Ripard <maxime@cerno.tech> |
ASoC: hdmi-codec: Rework to support more controls We're going to add more controls to support the IEC958 output, so let's rework the control registration a bit to support more of them. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210525132354.297468-4-maxime@cerno.tech
|
#
68d8b7ba |
|
26-May-2021 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: add .auto_selectable_formats support By this patch, DAI format might be automatically selected (Depends on paired DAI). Link: https://lore.kernel.org/r/871rb3hypy.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871racbx0w.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6ognc5i.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
9ad869fe |
|
11-Mar-2021 |
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> |
ASoC: hdmi-codec: remove unused spk_mask member fix cppcheck warning: sound/soc/codecs/hdmi-codec.c:25:16: style: struct member 'hdmi_codec_channel_map_table::spk_mask' is never used. [unusedStructMember] unsigned long spk_mask; /* speaker position bit mask */ ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210312182246.5153-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
3c011ef3 |
|
11-Mar-2021 |
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> |
ASoC: hdmi-codec: remove useless initialization Fix cppcheck warning: sound/soc/codecs/hdmi-codec.c:745:5: style: Redundant initialization for 'cf'. The initialized value is overwritten before it is read. [redundantInitialization] cf = dai->playback_dma_data; ^ sound/soc/codecs/hdmi-codec.c:738:31: note: cf is initialized struct hdmi_codec_daifmt *cf = dai->playback_dma_data; ^ sound/soc/codecs/hdmi-codec.c:745:5: note: cf is overwritten cf = dai->playback_dma_data; ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210312182246.5153-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
28785f54 |
|
03-Feb-2021 |
Sia Jee Heng <jee.heng.sia@intel.com> |
ASoC: codec: hdmi-codec: Support IEC958 encoded PCM format Existing hdmi-codec driver only support standard pcm format. Support of IEC958 encoded format pass from ALSA IEC958 plugin is needed so that the IEC958 encoded data can be streamed to the HDMI chip. Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com> Link: https://lore.kernel.org/r/20210204014258.10197-2-jee.heng.sia@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
2a0435df |
|
07-Jan-2021 |
Stephan Gerhold <stephan@gerhold.net> |
ASoC: hdmi-codec: Fix return value in hdmi_codec_set_jack() Sound is broken on the DragonBoard 410c (apq8016_sbc) since 5.10: hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95 qcom-apq8016-sbc 7702000.sound: Failed to set jack: -95 ADV7533: ASoC: error at snd_soc_link_init on ADV7533: -95 hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95 qcom-apq8016-sbc: probe of 7702000.sound failed with error -95 This happens because apq8016_sbc calls snd_soc_component_set_jack() on all codec DAIs and attempts to ignore failures with return code -ENOTSUPP. -ENOTSUPP is also excluded from error logging in soc_component_ret(). However, hdmi_codec_set_jack() returns -E*OP*NOTSUPP if jack detection is not supported, which is not handled in apq8016_sbc and soc_component_ret(). Make it return -ENOTSUPP instead to fix sound and silence the errors. Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 55c5cc63ab32 ("ASoC: hdmi-codec: Use set_jack ops to set jack") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210107165131.2535-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
144f8366 |
|
25-Nov-2020 |
Shengjiu Wang <shengjiu.wang@nxp.com> |
ASoC: hdmi-codec: Add RX support HDMI interface can also be used as receiver, this patch is to add such support. The most difference compare with TX is that RX don't need to get edid information. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1606372608-2329-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
25ce4f2b |
|
17-Nov-2020 |
Cheng-Yi Chiang <cychiang@chromium.org> |
ASoC: hdmi-codec: Get ELD in before reporting plugged event In plugged callback, ELD should be updated from display driver so that user space can query information from ELD immediately after receiving jack plugged event. When jack is unplugged, clear ELD buffer so that user space does not get obsolete information of unplugged HDMI. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20201118043852.1338877-1-cychiang@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
55c5cc63 |
|
22-Sep-2020 |
Cheng-Yi Chiang <cychiang@chromium.org> |
ASoC: hdmi-codec: Use set_jack ops to set jack Use set_jack ops to set jack so machine drivers do not need to include hdmi-codec.h explicitly. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200922062316.1172935-1-cychiang@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
5856d8bd |
|
19-Jul-2020 |
Alexander A. Klimov <grandmaster@al2klimov.de> |
ASoC: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200719153822.59788-1-grandmaster@al2klimov.de Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
d789710f |
|
08-Jul-2020 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: merge .digital_mute() into .mute_stream() snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } For hdmi-codec, we need to update struct hdmi_codec_ops, and all its users in the same time. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/87d055xxj2.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
e07e49c0 |
|
08-Jul-2020 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: return -ENOTSUPP for digital_mute snd_soc_dai_digital_mute() will return -ENOTSUPP if driver doesn't support mute. In hdmi-codec case, hdmi_codec_digital_mute() will be used for it, and each driver has .digital_mute() callback. hdmi_codec_digital_mute() want to return -ENOTSUPP to follow it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87fta1xxjc.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
4aadf4b4 |
|
16-Feb-2020 |
Tzung-Bi Shih <tzungbi@google.com> |
ASoC: hdmi-codec: set plugged_cb to NULL when component removing Sets plugged_cb to NULL when component removing to notify its consumers : no further plugged status report is required. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200217105513.1.Icc323daaf71ad02f191fd8d91136b01b61eca5e3@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
c593642c |
|
09-Dec-2019 |
Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> |
treewide: Use sizeof_field() macro Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
|
#
14428429 |
|
06-Dec-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: re-introduce mutex locking again The dai codec needs to ensure that on one dai is used at any time. This is currently protected by bit atomic operation. With this change, it done with a mutex instead. This change is not about functionality or efficiency. It is done with the hope that it help maintainability in the future. Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191206103542.485224-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
901af18b |
|
23-Oct-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: drop mutex locking again This reverts commit eb1ecadb7f67dde94ef0efd3ddaed5cb6c9a65ed. This fixes the following warning reported by lockdep and a potential issue with hibernation ==================================== WARNING: pulseaudio/1297 still has locks held! 5.3.0+ #1826 Not tainted ------------------------------------ 1 lock held by pulseaudio/1297: #0: ee815308 (&hcp->lock){....}, at: hdmi_codec_startup+0x20/0x130 stack backtrace: CPU: 0 PID: 1297 Comm: pulseaudio Not tainted 5.3.0+ #1826 Hardware name: Marvell Dove (Cubox) [<c0017b4c>] (unwind_backtrace) from [<c0014d10>] (show_stack+0x10/0x14) [<c0014d10>] (show_stack) from [<c00a2d18>] (futex_wait_queue_me+0x13c/0x19c) [<c00a2d18>] (futex_wait_queue_me) from [<c00a3630>] (futex_wait+0x184/0x24c) [<c00a3630>] (futex_wait) from [<c00a5e1c>] (do_futex+0x334/0x598) [<c00a5e1c>] (do_futex) from [<c00a62e8>] (sys_futex_time32+0x118/0x180) [<c00a62e8>] (sys_futex_time32) from [<c0009000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xebd31fa8 to 0xebd31ff0) 1fa0: 00000000 ffffffff 000c8748 00000189 00000001 00000000 1fc0: 00000000 ffffffff 00000000 000000f0 00000000 00000000 00000000 00056200 1fe0: 000000f0 beac03a8 b6d6c835 b6d6f456 Fixes: eb1ecadb7f67 ("ASoC: hdmi-codec: re-introduce mutex locking") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191023161203.28955-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
6fa5963c |
|
17-Jul-2019 |
Cheng-Yi Chiang <cychiang@chromium.org> |
ASoC: hdmi-codec: Add an op to set callback function for plug event Add an op in hdmi_codec_ops so codec driver can register callback function to handle plug event. Driver in DRM can use this callback function to report connector status. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.org Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
1802d0be |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
eb1ecadb |
|
13-May-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: re-introduce mutex locking Replace the bit atomic operations by a mutex to ensure only one dai at a time is active on the hdmi codec. This is a follow up on change: 3fcf94ef4d41 ("ASoC: hdmi-codec: remove reference to the current substream") Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
0cf4610b |
|
06-May-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: remove ops dependency on the dai id The dependency on the dai_id can be removed by setting different ops for the i2s and spdif dai and storing the dai format information in each dai structure. It simplies the code a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
1de005d4 |
|
06-May-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: remove reference to the dai drivers in the private data Keeping the a pointer to the dai drivers is not necessary. It is not used by the hdmi_codec after the probe. Even if it was used, the 'struct snd_soc_dai_driver' can accessed through the 'struct snd_soc_dai' so keeping the pointer in the private data structure is not useful. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
3fcf94ef |
|
06-May-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: remove reference to the current substream If the hdmi-codec is on a codec-to-codec link, the substream pointer it receives is completely made up by snd_soc_dai_link_event(). The pointer will be different between startup() and shutdown(). The hdmi-codec complains when this happens even if it is not really a problem. The current_substream pointer is not used for anything useful apart from getting the exclusive ownership of the device. Remove current_substream pointer and replace the exclusive locking mechanism with a simple variable and some atomic operations. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
900e5daf |
|
06-May-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: remove function name debug traces Remove the debug traces only showing the function name on entry. The same can be obtained using ftrace. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
726fc60b |
|
29-Apr-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: stream is already locked in hw_params startup() should have run before hw_params() is called, so the current_substream pointer should already be properly set. There is no reason to call hdmi_codec_new_stream() again in the hw_params() callback Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
30180e84 |
|
29-Apr-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
ASoC: hdmi-codec: unlock the device on startup errors If the hdmi codec startup fails, it should clear the current_substream pointer to free the device. This is properly done for the audio_startup() callback but for snd_pcm_hw_constraint_eld(). Make sure the pointer cleared if an error is reported. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
7b6531c5 |
|
17-Apr-2019 |
Colin Ian King <colin.king@canonical.com> |
ASoC: hdmi-codec: fix spelling mistake "plalform" -> "platform" There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
bbf62563 |
|
28-Feb-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
ASoC: hdmi-codec: avoid limiting params->msbits in hw_params() Limiting the value of the passed in params->msbits in the hw_params() callback is redundant on three counts: 1. We already specify in the DAI driver that we can only handle up to 24 bits. This means msbits will be limited to 24 via the ALSA constraints imposed by the ASoC core, unless we have multiple codecs that can handle more bits. 2. Nothing in our hw_params() implementation uses this value. 3. The copy of the params that we are passed by the ASoC core never reads back the msbits value. Consequently, this code is unnecessary and does nothing useful. Remove it. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
2e95f984 |
|
28-Feb-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
ASoC: hdmi-codec: fix S/PDIF DAI When using the S/PDIF DAI, there is no requirement to call snd_soc_dai_set_fmt() as there is no DAI format definition that defines S/PDIF. In any case, S/PDIF does not have separate clocks, this is embedded into the data stream. Consequently, when attempting to use TDA998x in S/PDIF mode, the attempt to configure TDA998x via the hw_params callback fails as the hdmi_codec_daifmt is left initialised to zero. Since the S/PDIF DAI will only be used by S/PDIF, prepare the hdmi_codec_daifmt structure for this format. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
0ce23d6d |
|
17-Jan-2019 |
Russell King <rmk+kernel@armlinux.org.uk> |
ASoC: hdmi-codec: fix oops on re-probe hdmi-codec oopses the kernel when it is unbound from a successfully bound audio subsystem, and is then rebound: Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = ee3f0000 [0000001c] *pgd=3cc59831 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: ext2 snd_soc_spdif_tx vmeta dove_thermal snd_soc_kirkwood ofpart marvell_cesa m25p80 orion_wdt mtd spi_nor des_generic gpio_ir_recv snd_soc_kirkwood_spdif bmm_dmabuf auth_rpcgss nfsd autofs4 etnaviv thermal_sys hwmon gpu_sched tda9950 CPU: 0 PID: 1005 Comm: bash Not tainted 4.20.0+ #1762 Hardware name: Marvell Dove (Cubox) PC is at hdmi_dai_probe+0x68/0x80 LR is at find_held_lock+0x20/0x94 pc : [<c04c7de0>] lr : [<c0063bf4>] psr: 600f0013 sp : ee15bd28 ip : eebd8b1c fp : c093b488 r10: ee048000 r9 : eebdab18 r8 : ee048600 r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ee82c100 r3 : 00000006 r2 : 00000001 r1 : c067e38c r0 : ee82c100 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 297.318599] Control: 10c5387d Table: 2e3f0019 DAC: 00000051 Process bash (pid: 1005, stack limit = 0xee15a248) ... [<c04c7de0>] (hdmi_dai_probe) from [<c04b7060>] (soc_probe_dai.part.9+0x34/0x70) [<c04b7060>] (soc_probe_dai.part.9) from [<c04b81a8>] (snd_soc_instantiate_card+0x734/0xc9c) [<c04b81a8>] (snd_soc_instantiate_card) from [<c04b8b6c>] (snd_soc_add_component+0x29c/0x378) [<c04b8b6c>] (snd_soc_add_component) from [<c04b8c8c>] (snd_soc_register_component+0x44/0x54) [<c04b8c8c>] (snd_soc_register_component) from [<c04c64b4>] (devm_snd_soc_register_component+0x48/0x84) [<c04c64b4>] (devm_snd_soc_register_component) from [<c04c7be8>] (hdmi_codec_probe+0x150/0x260) [<c04c7be8>] (hdmi_codec_probe) from [<c0373124>] (platform_drv_probe+0x48/0x98) This happens because hdmi_dai_probe() attempts to access the HDMI codec private data, but this has not been assigned by hdmi_dai_probe() before it calls devm_snd_soc_register_component(). Move the call to dev_set_drvdata() before devm_snd_soc_register_component() to avoid this oops. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
|
#
d30e23d6 |
|
14-Jul-2018 |
Russell King <rmk+kernel@armlinux.org.uk> |
ASoC: hdmi-codec: fix routing Commit 943fa0228252 ("ASoC: hdmi-codec: Use different name for playback streams") broke hdmi-codec's routing between it's output "TX" widget and the S/PDIF or I2S streams by renaming the streams. Whether an error occurs or not is dependent on whether there is another widget called "Playback" registered by some other component - if there is, that widget will be (incorrectly) bound to the HDMI codec's "TX" output widget. If we end up connecting "TX" incorrectly, it can result in components not being started, causing no audio output. Since the I2S and S/PDIF streams now have different names, we can't use a static route at component level to describe the relationship, so arrange to dynamically create the route when the DAI driver is probed. Fixes: 943fa0228252 ("ASoC: hdmi-codec: Use different name for playback streams") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
a86854d0 |
|
12-Jun-2018 |
Kees Cook <keescook@chromium.org> |
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
f1c680f5 |
|
20-Feb-2018 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ASoC: hdmi-codec: Fix module unloading caused kernel crash The hcp->chmap_info must not be freed up in the hdmi_codec_remove() function as it leads to kernel crash due ALSA core's pcm_chmap_ctl_private_free() is trying to free it up again when the card destroyed via snd_card_free. Since the driver was converted to devm_snd_soc_register_component() the whole platform_device.remove can be removed. Commit cd6111b26280a ("ASoC: hdmi-codec: add channel mapping control") should not have added the kfree(hcp->chmap_info); to the hdmi_codec_remove function. [Separate verison of the fix for -next -- broonie] Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
5e558f8a |
|
20-Feb-2018 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ASoC: hdmi-codec: Fix module unloading caused kernel crash The hcp->chmap_info must not be freed up in the hdmi_codec_remove() function as it leads to kernel crash due ALSA core's pcm_chmap_ctl_private_free() is trying to free it up again when the card destroyed via snd_card_free. Commit cd6111b26280a ("ASoC: hdmi-codec: add channel mapping control") should not have added the kfree(hcp->chmap_info); to the hdmi_codec_remove function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
d20aa608 |
|
28-Jan-2018 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: replace codec to component Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
0607aa3c |
|
18-Sep-2017 |
Colin Ian King <colin.king@canonical.com> |
ASoC: hdmi-codec: use sizeof_field rather than declaring hcp Use FIELD_SIZEOF rather than declaring and initializing hcp. Remove unused variables. Cleans up clang warning: warning: Value stored to 'hcp' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
943fa022 |
|
11-Aug-2017 |
Jeffy Chen <jeffy.chen@rock-chips.com> |
ASoC: hdmi-codec: Use different name for playback streams Currently the hdmi i2s playback stream and hdmi spdif playback stream are using the same name. So when they are enabled at the same time, kernel will print this warning: [ 2.201835] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to create Playback debugfs file Assign different names to them to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
6e37f933 |
|
16-Aug-2017 |
Bhumika Goyal <bhumirks@gmail.com> |
ASoC: codecs: make snd_soc_dai_driver and snd_soc_component_driver const Make these two structure variables const as they are either used in a copy operation or passed to devm_snd_soc_register_component having the corresponding argument as const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
3013c75f |
|
12-Aug-2017 |
Colin Ian King <colin.king@canonical.com> |
ASoC: hdmi-codec: make a function and two arrays static The function hdmi_codec_eld_chmap and arrays hdmi_codec_stereo_chmaps and hdmi_codec_8ch_chmaps are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'hdmi_codec_eld_chmap' was not declared. Should it be static? symbol 'hdmi_codec_stereo_chmaps' was not declared. Should it be static? symbol 'hdmi_codec_8ch_chmaps' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
a180ba45 |
|
03-Aug-2017 |
Bhumika Goyal <bhumirks@gmail.com> |
ASoC: codecs: add const to snd_soc_codec_driver structures Declare snd_soc_codec_driver structures as const as they are only passed as an argument to the function snd_soc_register_codec. This argument is of type const, so declare the structures with this property as const. In file codecs/sn95031.c, snd_soc_codec_driver structure is also used in a copy operation along with getting passed to snd_soc_register_codec. So, it can be made const too. Done using Coccinelle: @match disable optional_qualifier@ identifier s; position p; @@ static struct snd_soc_codec_driver s@p={...}; @good1@ identifier match.s; position p; @@ snd_soc_register_codec(...,&s@p,...) @bad@ identifier match.s; position p!={match.p,good1.p}; @@ s@p @depends on !bad disable optional_qualifier@ identifier match.s; @@ static +const struct snd_soc_codec_driver s={...}; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
1d6463a3 |
|
11-Jul-2017 |
Colin Ian King <colin.king@canonical.com> |
ASoC: hdmi-codec: make const array hdmi_codec_eld_spk_alloc_bits static Don't populate array hdmi_codec_eld_spk_alloc_bits on the stack but make it static. Makes the object code smaller by over 260 bytes: Before: text data bss dec hex filename 10882 3384 64 14330 37fa sound/soc/codecs/hdmi-codec.o After: text data bss dec hex filename 10557 3440 64 14061 36ed sound/soc/codecs/hdmi-codec.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
ecbb1b8d |
|
05-Jul-2017 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: ELD control corresponds to the PCM stream Current hdmi-codec driver is using hdmi_controls for "ELD" control. But, hdmi-codec driver might be used from many HDMIs. Thus, we need to correspond device number, otherwise we will receive below error. xxx: control x:x:x:ELD:x is already present This patch registers ELD control in .pcm_new by using .device = rtd->pcm->device to corresponding to PCM stream. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [Takashi: use snd_ctl_new1()/snd_ctl_add()] Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
ca3b5ad3 |
|
06-Jun-2017 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: remove unused ratec struct snd_pcm_hw_constraint_list ratec is not used. Let's remove it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
96203fb4 |
|
17-May-2017 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: add .get_dai_id support ALSA SoC needs to know connected DAI ID for probing. It is not a big problem if device/driver was only for sound, but getting DAI ID will be difficult if device includes both Video/Sound, like HDMI. To solve this issue, this patch adds new .get_dai_id callback on hdmi_codec_ops Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
24069b58 |
|
17-May-2017 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: remove multi detection support DesignWare HDMI driver (= dw-hdmi) is supporting HDMI sound, and its probe function was calling sound binding function multiple times as same HDMI device different port. Because of this behavior, commit 9731f82d601 ("ASoC: hdmi-codec: enable multi probe for ...") was added for multi detection case. But, this DesignWare HDMI detection/bind code was exchanged/adjusted by commit 69497eb9234 ("drm: bridge: dw-hdmi: Implement DRM bridge..."). Now, all DesignWare HDMI sound ports are detected as 1 bindng function. Because of this, hdmi-codec multi detection support is no longer needed. Thus, this patch removes commit 9731f82d601 ("ASoC: hdmi-codec: enable multi probe for ..."), and its related commit 340327a62c4 ("ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name...") commit 8480ac56795 ("ASoC: hdmi-codec: remove HDMI device unregister") commit 0c343a35bfe ("ASoC: hdmi-codec: fix spelling mistake: ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
0c343a35 |
|
14-May-2017 |
Colin Ian King <colin.king@canonical.com> |
ASoC: hdmi-codec: fix spelling mistake: "deteced" -> "detected" Trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
8480ac56 |
|
08-Feb-2017 |
Vincent Abriou <vincent.abriou@st.com> |
ASoC: hdmi-codec: remove HDMI device unregister While unregistering the hdmi-codec, the hdmi device list must be cleaned up. It avoid kernel page fault when registering again the hdmi-codec. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
cd6111b2 |
|
03-Jan-2017 |
Arnaud Pouliquen <arnaud.pouliquen@st.com> |
ASoC: hdmi-codec: add channel mapping control Add user interface to provide channel mapping. In a first step this control is read only. As TLV type, the control provides all configuration available for HDMI sink(ELD), and provides current channel mapping selected by codec based on ELD and number of channels specified by user on open. When control is called before the number of the channel is specified (i.e. hw_params is set), it returns all channels set to UNKNOWN. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
340327a6 |
|
28-Oct-2016 |
Jon Medhurst (Tixy) <tixy@linaro.org> |
ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0> If a DAI specifies "#sound-dai-cells = <0>" in device-tree then hdmi_of_xlate_dai_name() will be called with zero args, which it isn't implemented to cope with. The resulting use of an uninitialised variable for the id will usually result in an error like: asoc-simple-card sound: parse error -11 asoc-simple-card: probe of sound failed with error -11 Fix this by using and id of zero if no arg is provided. Fixes: 9731f82d6016 ("ASoC: hdmi-codec: enable multi probe for same device") Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
88b0f761 |
|
08-Aug-2016 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: codec duplicated callback function goes to component on hdmi-codec codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
9731f82d |
|
02-Aug-2016 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: enable multi probe for same device hdmi-codec driver is common HDMI sound driver, but it doesn't care about multi sound ports. For example, hdmi-codec driver is supporting 1 I2S and 1 SPDIF ports, so, we can't use this driver if HDMI has 2 or more I2S ports. And we would like to use multi detection. For example, DesignWare HDMI driver is providing dw_hdmi_bind() to DRM/KMS driver, and it will setups HDMI video/sound. Note is that it will be called under for_each loop of ports. int dw_hdmi_bind(xxx) { /* register hdmi-codec driver here */ } static int xxx_probe(struct platform_device *pdev) { for_each_xxx(xx) { ... dw_hdmi_bind(xxx); ... } } This case, dw_hdmi_bind() would like to use hdmi-codec, and it will be called multiple times for each ports. Here, ASoC's CPU/Codec/Card bind will checks each "of_node" on DT, and hdmi-codec driver is assuming its parent device for it. But it doesn't care about case. Thus, ASoC never detect correct sound card in this case. To solve this issue, this patch checks each parent device, and names "hdmi-hifi.x" in order to each ports. And uses struct snd_soc_component_driver :: of_xlate_dai_name for snd_soc_get_dai_name(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
efc9194b |
|
23-Jun-2016 |
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
ASoC: hdmi-codec: callback function will be called with private data Current hdmi-codec driver is assuming that it will be registered from HDMI driver. Because of this assumption, each callback function has struct device pointer which is parent device (= HDMI). Then, it can use dev_get_drvdata() to get private data. OTOH, on some SoC/HDMI case, SoC has VIDEO/SOUND and HDMI IPs. This case, it needs SoC VIDEO, SoC SOUND and HDMI video, HDMI codec driver. In DesignWare HDMI IP case, SoC VIDEO (= DRM/KMS) driver tries to bind DesignWare HDMI video driver, and HDMI codec driver (= hdmi-codec). This case, above "parent device" of HDMI codec driver is DRM/KMS driver and its "device" already has private data. And, from DT and ASoC CPU/Codec/Card binding point of view, HDMI codec (= hdmi-codec) needs to have "parent device" (= DRM/KMS), otherwise, it never detect sound card. Because of these reasons, some driver can't use dev_get_drvdata() to get private data on hdmi-codec driver. This patch add new void pointer on hdmi_codec_pdata for private data, and callback function will be called with it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
db71336b |
|
22-Apr-2016 |
Philipp Zabel <p.zabel@pengutronix.de> |
ASoC: hdmi-codec: Add ELD control Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
81151cfb |
|
20-Apr-2016 |
Philipp Zabel <p.zabel@pengutronix.de> |
ASoC: hdmi-codec: Add ELD control ALSA doesn't know about all the different compressed audio formats, so there is no interface to let userspace enumerate the formats that are supported by the connected sink. Exporting the raw ELD bytes to userspace allows an application to select the appropriate audio format depending on the current capabilities of the connected HDMI sink device. Usually userspace then just pretends to ALSA that the data is in one of the raw 16-bit PCM audio formats and relies on the IEC controls to tell the sink how to interpret the data. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Jyri Sarha <jsarha@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|
#
09184118 |
|
31-Mar-2016 |
Jyri Sarha <jsarha@ti.com> |
ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders The hdmi-codec is a platform device driver to be registered from drivers of external HDMI encoders with I2S and/or spdif interface. The driver in turn registers an ASoC codec for the HDMI encoder's audio functionality. The structures and definitions in the API header are mostly redundant copies of similar structures in ASoC headers. This is on purpose to avoid direct dependencies to ASoC structures in video side driver. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: PC Liao <pc.liao@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
|