lsm: use 32-bit compatible data types in LSM syscalls

Change the size parameters in lsm_list_modules(), lsm_set_self_attr()
and lsm_get_self_attr() from size_t to u32. This avoids the need to
have different interfaces for 32 and 64 bit systems.

Cc: stable@vger.kernel.org
Fixes: a04a1198088a ("LSM: syscalls for current process attributes")
Fixes: ad4aff9ec25f ("LSM: Create lsm_list_modules system call")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-and-reviewed-by: Dmitry V. Levin <ldv@strace.io>
[PM: subject and metadata tweaks, syscall.h fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

security: Align inode_setattr hook definition with EVM

Add the idmap parameter to the definition, so that evm_inode_setattr() can
be registered as this hook implementation.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: only filter copy-up xattrs following initialization

Extended attribute copy-up functionality added via 19472b69d639d
("selinux: Implementation for inode_copy_up_xattr() hook") sees
"security.selinux" contexts dropped, instead relying on contexts
applied via the inode_copy_up() hook.

When copy-up takes place during early boot, prior to selinux
initialization / policy load, the context stripping can be unwanted
and unexpected.

With this change, filtering of "security.selinux" xattrs will only occur
after selinux initialization.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: correct return values in selinux_socket_getpeersec_dgram()

Instead of returning -EINVAL if any type of error occurs, limit
-EINVAL to only those errors caused by passing a bad/invalid socket
or packet/skb. In other cases where everything is correct but there
isn't a valid peer label we return -ENOPROTOOPT.

This helps make selinux_socket_getpeersec_dgram() more consistent
with selinux_socket_getpeersec_stream().

Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: reduce the object class calculations at inode init time

We only need to call inode_mode_to_security_class() once in
selinux_inode_init_security().

Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

bpf,selinux: Allocate bpf_security_struct per BPF token

Utilize newly added bpf_token_create/bpf_token_free LSM hooks to
allocate struct bpf_security_struct for each BPF token object in
SELinux. This just follows similar pattern for BPF prog and map.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-18-andrii@kernel.org

bpf,lsm: Refactor bpf_map_alloc/bpf_map_free LSM hooks

Similarly to bpf_prog_alloc LSM hook, rename and extend bpf_map_alloc
hook into bpf_map_create, taking not just struct bpf_map, but also
bpf_attr and bpf_token, to give a fuller context to LSMs.

Unlike bpf_prog_alloc, there is no need to move the hook around, as it
currently is firing right before allocating BPF map ID and FD, which
seems to be a sweet spot.

But like bpf_prog_alloc/bpf_prog_free combo, make sure that bpf_map_free
LSM hook is called even if bpf_map_create hook returned error, as if few
LSMs are combined together it could be that one LSM successfully
allocated security blob for its needs, while subsequent LSM rejected BPF
map creation. The former LSM would still need to free up LSM blob, so we
need to ensure security_bpf_map_free() is called regardless of the
outcome.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-11-andrii@kernel.org

bpf,lsm: Refactor bpf_prog_alloc/bpf_prog_free LSM hooks

Based on upstream discussion ([0]), rework existing
bpf_prog_alloc_security LSM hook. Rename it to bpf_prog_load and instead
of passing bpf_prog_aux, pass proper bpf_prog pointer for a full BPF
program struct. Also, we pass bpf_attr union with all the user-provided
arguments for BPF_PROG_LOAD command. This will give LSMs as much
information as we can basically provide.

The hook is also BPF token-aware now, and optional bpf_token struct is
passed as a third argument. bpf_prog_load LSM hook is called after
a bunch of sanity checks were performed, bpf_prog and bpf_prog_aux were
allocated and filled out, but right before performing full-fledged BPF
verification step.

bpf_prog_free LSM hook is now accepting struct bpf_prog argument, for
consistency. SELinux code is adjusted to all new names, types, and
signatures.

Note, given that bpf_prog_load (previously bpf_prog_alloc) hook can be
used by some LSMs to allocate extra security blob, but also by other
LSMs to reject BPF program loading, we need to make sure that
bpf_prog_free LSM hook is called after bpf_prog_load/bpf_prog_alloc one
*even* if the hook itself returned error. If we don't do that, we run
the risk of leaking memory. This seems to be possible today when
combining SELinux and BPF LSM, as one example, depending on their
relative ordering.

Also, for BPF LSM setup, add bpf_prog_load and bpf_prog_free to
sleepable LSM hooks list, as they are both executed in sleepable
context. Also drop bpf_prog_load hook from untrusted, as there is no
issue with refcount or anything else anymore, that originally forced us
to add it to untrusted list in c0c852dd1876 ("bpf: Do not mark certain LSM
hook arguments as trusted"). We now trigger this hook much later and it
should not be an issue anymore.

[0] https://lore.kernel.org/bpf/9fe88aef7deabbe87d3fc38c4aea3c69.paul@paul-moore.com/

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-10-andrii@kernel.org

selinux: fix lsm_get_self_attr()

selinux_getselfattr() doesn't properly initialize the string pointer
it passes to selinux_lsm_getattr() which can cause a problem when an
attribute hasn't been explicitly set; selinux_lsm_getattr() returns
0/success, but does not set or initialize the string label/attribute.
Failure to properly initialize the string causes problems later in
selinux_getselfattr() when the function attempts to kfree() the
string.

Cc: Casey Schaufler <casey@schaufler-ca.com>
Fixes: 762c934317e6 ("SELinux: Add selfattr hooks")
Suggested-by: Paul Moore <paul@paul-moore.com>
[PM: description changes as discussed in the thread]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Revert BPF token-related functionality

This patch includes the following revert (one conflicting BPF FS
patch and three token patch sets, represented by merge commits):
- revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'";
- revert 750e785796bb "bpf: Support uid and gid when mounting bpffs";
- revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'";
- revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'".

Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

io_uring: split out cmd api into a separate header

linux/io_uring.h is slowly becoming a rubbish bin where we put
anything exposed to other subsystems. For instance, the task exit
hooks and io_uring cmd infra are completely orthogonal and don't need
each other's definitions. Start cleaning it up by splitting out all
command bits into a new header file.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bpf,selinux: allocate bpf_security_struct per BPF token

Utilize newly added bpf_token_create/bpf_token_free LSM hooks to
allocate struct bpf_security_struct for each BPF token object in
SELinux. This just follows similar pattern for BPF prog and map.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-18-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf,lsm: refactor bpf_map_alloc/bpf_map_free LSM hooks

Similarly to bpf_prog_alloc LSM hook, rename and extend bpf_map_alloc
hook into bpf_map_create, taking not just struct bpf_map, but also
bpf_attr and bpf_token, to give a fuller context to LSMs.

Unlike bpf_prog_alloc, there is no need to move the hook around, as it
currently is firing right before allocating BPF map ID and FD, which
seems to be a sweet spot.

But like bpf_prog_alloc/bpf_prog_free combo, make sure that bpf_map_free
LSM hook is called even if bpf_map_create hook returned error, as if few
LSMs are combined together it could be that one LSM successfully
allocated security blob for its needs, while subsequent LSM rejected BPF
map creation. The former LSM would still need to free up LSM blob, so we
need to ensure security_bpf_map_free() is called regardless of the
outcome.

Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf,lsm: refactor bpf_prog_alloc/bpf_prog_free LSM hooks

Based on upstream discussion ([0]), rework existing
bpf_prog_alloc_security LSM hook. Rename it to bpf_prog_load and instead
of passing bpf_prog_aux, pass proper bpf_prog pointer for a full BPF
program struct. Also, we pass bpf_attr union with all the user-provided
arguments for BPF_PROG_LOAD command. This will give LSMs as much
information as we can basically provide.

The hook is also BPF token-aware now, and optional bpf_token struct is
passed as a third argument. bpf_prog_load LSM hook is called after
a bunch of sanity checks were performed, bpf_prog and bpf_prog_aux were
allocated and filled out, but right before performing full-fledged BPF
verification step.

bpf_prog_free LSM hook is now accepting struct bpf_prog argument, for
consistency. SELinux code is adjusted to all new names, types, and
signatures.

Note, given that bpf_prog_load (previously bpf_prog_alloc) hook can be
used by some LSMs to allocate extra security blob, but also by other
LSMs to reject BPF program loading, we need to make sure that
bpf_prog_free LSM hook is called after bpf_prog_load/bpf_prog_alloc one
*even* if the hook itself returned error. If we don't do that, we run
the risk of leaking memory. This seems to be possible today when
combining SELinux and BPF LSM, as one example, depending on their
relative ordering.

Also, for BPF LSM setup, add bpf_prog_load and bpf_prog_free to
sleepable LSM hooks list, as they are both executed in sleepable
context. Also drop bpf_prog_load hook from untrusted, as there is no
issue with refcount or anything else anymore, that originally forced us
to add it to untrusted list in c0c852dd1876 ("bpf: Do not mark certain LSM
hook arguments as trusted"). We now trigger this hook much later and it
should not be an issue anymore.

[0] https://lore.kernel.org/bpf/9fe88aef7deabbe87d3fc38c4aea3c69.paul@paul-moore.com/

Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selinux: Fix error priority for bind with AF_UNSPEC on PF_INET6 socket

The IPv6 network stack first checks the sockaddr length (-EINVAL error)
before checking the family (-EAFNOSUPPORT error).

This was discovered thanks to commit a549d055a22e ("selftests/landlock:
Add network tests").

Cc: Eric Paris <eparis@parisplace.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/r/0584f91c-537c-4188-9e4f-04f192565667@collabora.com
Fixes: 0f8db8cc73df ("selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: new security_file_ioctl_compat() hook

Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).

However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.

This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".

This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.

Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.

Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>

shm: Slim down dependencies

list_head is in types.h, not list.h., and the uapi header wasn't needed.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

selinux: remove the wrong comment about multithreaded process handling

Since commit d9250dea3f89 ("SELinux: add boundary support and thread
context assignment"), SELinux has been supporting assigning per-thread
security context under a constraint and the comment was updated
accordingly. However, seems like commit d84f4f992cbd ("CRED: Inaugurate
COW credentials") accidentally brought the old comment back that doesn't
match what the code does.

Considering the ease of understanding the code, this patch just removes the
wrong comment.

Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials")
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: introduce an initial SID for early boot processes

Currently, SELinux doesn't allow distinguishing between kernel threads
and userspace processes that are started before the policy is first
loaded - both get the label corresponding to the kernel SID. The only
way a process that persists from early boot can get a meaningful label
is by doing a voluntary dyntransition or re-executing itself.

Reusing the kernel label for userspace processes is problematic for
several reasons:
1. The kernel is considered to be a privileged domain and generally
needs to have a wide range of permissions allowed to work correctly,
which prevents the policy writer from effectively hardening against
early boot processes that might remain running unintentionally after
the policy is loaded (they represent a potential extra attack surface
that should be mitigated).
2. Despite the kernel being treated as a privileged domain, the policy
writer may want to impose certain special limitations on kernel
threads that may conflict with the requirements of intentional early
boot processes. For example, it is a good hardening practice to limit
what executables the kernel can execute as usermode helpers and to
confine the resulting usermode helper processes. However, a
(legitimate) process surviving from early boot may need to execute a
different set of executables.
3. As currently implemented, overlayfs remembers the security context of
the process that created an overlayfs mount and uses it to bound
subsequent operations on files using this context. If an overlayfs
mount is created before the SELinux policy is loaded, these "mounter"
checks are made against the kernel context, which may clash with
restrictions on the kernel domain (see 2.).

To resolve this, introduce a new initial SID (reusing the slot of the
former "init" initial SID) that will be assigned to any userspace
process started before the policy is first loaded. This is easy to do,
as we can simply label any process that goes through the
bprm_creds_for_exec LSM hook with the new init-SID instead of
propagating the kernel SID from the parent.

To provide backwards compatibility for existing policies that are
unaware of this new semantic of the "init" initial SID, introduce a new
policy capability "userspace_initial_context" and set the "init" SID to
the same context as the "kernel" SID unless this capability is set by
the policy.

Another small backwards compatibility measure is needed in
security_sid_to_context_core() for before the initial SELinux policy
load - see the code comment for explanation.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: edited comments based on feedback/discussion]
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: mark the lsm_id variables are marked as static

As the kernel test robot helpfully reminded us, all of the lsm_id
instances defined inside the various LSMs should be marked as static.
The one exception is Landlock which uses its lsm_id variable across
multiple source files with an extern declaration in a header file.

Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: consolidate buffer size handling into lsm_fill_user_ctx()

While we have a lsm_fill_user_ctx() helper function designed to make
life easier for LSMs which return lsm_ctx structs to userspace, we
didn't include all of the buffer length safety checks and buffer
padding adjustments in the helper. This led to code duplication
across the different LSMs and the possibility for mistakes across the
different LSM subsystems. In order to reduce code duplication and
decrease the chances of silly mistakes, we're consolidating all of
this code into the lsm_fill_user_ctx() helper.

The buffer padding is also modified from a fixed 8-byte alignment to
an alignment that matches the word length of the machine
(BITS_PER_LONG / 8).

Signed-off-by: Paul Moore <paul@paul-moore.com>

SELinux: Add selfattr hooks

Add hooks for setselfattr and getselfattr. These hooks are not very
different from their setprocattr and getprocattr equivalents, and
much of the code is shared.

Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: Identify modules by more than name

Create a struct lsm_id to contain identifying information about Linux
Security Modules (LSMs). At inception this contains the name of the
module and an identifier associated with the security module. Change
the security_add_hooks() interface to use this structure. Change the
individual modules to maintain their own struct lsm_id and pass it to
security_add_hooks().

The values are for LSM identifiers are defined in a new UAPI
header file linux/lsm.h. Each existing LSM has been updated to
include it's LSMID in the lsm_id.

The LSM ID values are sequential, with the oldest module
LSM_ID_CAPABILITY being the lowest value and the existing modules
numbered in the order they were included in the main line kernel.
This is an arbitrary convention for assigning the values, but
none better presents itself. The value 0 is defined as being invalid.
The values 1-99 are reserved for any special case uses which may
arise in the future. This may include attributes of the LSM
infrastructure itself, possibly related to namespacing or network
attribute management. A special range is identified for such attributes
to help reduce confusion for developers unfamiliar with LSMs.

LSM attribute values are defined for the attributes presented by
modules that are available today. As with the LSM IDs, The value 0
is defined as being invalid. The values 1-99 are reserved for any
special case uses which may arise in the future.

Cc: linux-security-module <linux-security-module@vger.kernel.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
[PM: forward ported beyond v6.6 due merge window changes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

cred: get rid of CONFIG_DEBUG_CREDENTIALS

This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.

Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lsm: constify 'sb' parameter in security_sb_kern_mount()

The "sb_kern_mount" hook has implementation registered in SELinux.
Looking at the function implementation we observe that the "sb"
parameter is not changing.

Mark the "sb" parameter of LSM hook security_sb_kern_mount() as "const"
since it will not be changing in the LSM hook.

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: constify 'bprm' parameter in security_bprm_committed_creds()

Three LSMs register the implementations for the 'bprm_committed_creds()'
hook: AppArmor, SELinux and tomoyo. Looking at the function
implementations we may observe that the 'bprm' parameter is not changing.

Mark the 'bprm' parameter of LSM hook security_bprm_committed_creds() as
'const' since it will not be changing in the LSM hook.

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: constify 'bprm' parameter in security_bprm_committing_creds()

The 'bprm_committing_creds' hook has implementations registered in
SELinux and Apparmor. Looking at the function implementations we observe
that the 'bprm' parameter is not changing.

Mark the 'bprm' parameter of LSM hook security_bprm_committing_creds()
as 'const' since it will not be changing in the LSM hook.

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: constify 'sb' parameter in security_quotactl()

SELinux registers the implementation for the "quotactl" hook. Looking at
the function implementation we observe that the parameter "sb" is not
changing.

Mark the "sb" parameter of LSM hook security_quotactl() as "const" since
it will not be changing in the LSM hook.

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix handling of empty opts in selinux_fs_context_submount()

selinux_set_mnt_opts() relies on the fact that the mount options pointer
is always NULL when all options are unset (specifically in its
!selinux_initialized() branch. However, the new
selinux_fs_context_submount() hook breaks this rule by allocating a new
structure even if no options are set. That causes any submount created
before a SELinux policy is loaded to be rejected in
selinux_set_mnt_opts().

Fix this by making selinux_fs_context_submount() leave fc->security
set to NULL when there are no options to be copied from the reference
superblock.

Cc: <stable@vger.kernel.org>
Reported-by: Adam Williamson <awilliam@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2236345
Fixes: d80a8f1b58c2 ("vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: use vma_is_initial_stack() and vma_is_initial_heap()

Use the helpers to simplify code.

Link: https://lkml.kernel.org/r/20230728050043.59880-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lsm: constify the 'file' parameter in security_binder_transfer_file()

SELinux registers the implementation for the "binder_transfer_file"
hook. Looking at the function implementation we observe that the
parameter "file" is not changing.

Mark the "file" parameter of LSM hook security_binder_transfer_file() as
"const" since it will not be changing in the LSM hook.

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: subject line whitespace fix]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: revert SECINITSID_INIT support

This commit reverts 5b0eea835d4e ("selinux: introduce an initial SID
for early boot processes") as it was found to cause problems on
distros with old SELinux userspace tools/libraries, specifically
Ubuntu 16.04.

Hopefully we will be able to re-add this functionality at a later
date, but let's revert this for now to help ensure a stable and
backwards compatible SELinux tree.

Link: https://lore.kernel.org/selinux/87edkseqf8.fsf@mail.lhotse
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: constify the 'target' parameter in security_capget()

Three LSMs register the implementations for the "capget" hook: AppArmor,
SELinux, and the normal capability code. Looking at the function
implementations we may observe that the first parameter "target" is not
changing.

Mark the first argument "target" of LSM hook security_capget() as
"const" since it will not be changing in the LSM hook.

cap_capget() LSM hook declaration exceeds the 80 characters per line
limit. Split the function declaration to multiple lines to decrease the
line length.

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: align the cap_capget() declaration, spelling fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: update comment on selinux_hooks[]

After commit f22f9aaf6c3d ("selinux: remove the runtime disable
functionality"), the comment on selinux_hooks[] is out-of-date,
remove the last paragraph about runtime disable functionality.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: log about VM being executable by default

In case virtual memory is being marked as executable by default, SELinux
checks regarding explicit potential dangerous use are disabled.

Inform the user about it.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix a 0/NULL mistmatch in ad_net_init_from_iif()

Use a NULL instead of a zero to resolve a int/pointer mismatch.

Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307210332.4AqFZfzI-lkp@intel.com/
Fixes: dd51fcd42fd6 ("selinux: introduce and use lsm_ad_net_init*() helpers")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: introduce and use lsm_ad_net_init*() helpers

Perf traces of network-related workload shows a measurable overhead
inside the network-related selinux hooks while zeroing the
lsm_network_audit struct.

In most cases we can delay the initialization of such structure to the
usage point, avoiding such overhead in a few cases.

Additionally, the audit code accesses the IP address information only
for AF_INET* families, and selinux_parse_skb() will fill-out the
relevant fields in such cases. When the family field is zeroed or the
initialization is followed by the mentioned parsing, the zeroing can be
limited to the sk, family and netif fields.

By factoring out the audit-data initialization to new helpers, this
patch removes some duplicate code and gives small but measurable
performance gain under UDP flood.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: update my email address

Update my email address; MAINTAINERS was updated some time ago.

Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: add missing newlines in pr_err() statements

The kernel print statements do not append an implicit newline to format
strings.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: de-brand SELinux

Change "NSA SELinux" to just "SELinux" in Kconfig help text and
comments. While NSA was the original primary developer and continues to
help maintain SELinux, SELinux has long since transitioned to a wide
community of developers and maintainers. SELinux has been part of the
mainline Linux kernel for nearly 20 years now [1] and has received
contributions from many individuals and organizations.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44.0308082228470.1852-100000@home.osdl.org/

Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: avoid implicit conversions in the LSM hooks

Use the identical types in assignments of local variables for the
destination.

Merge tail calls into return statements.

Avoid using leading underscores for function local variable.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>

security: Constify sk in the sk_getsecid hook.

The sk_getsecid hook shouldn't need to modify its socket argument.
Make it const so that callers of security_sk_classify_flow() can use a
const struct sock *.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selinux: introduce an initial SID for early boot processes

Currently, SELinux doesn't allow distinguishing between kernel threads
and userspace processes that are started before the policy is first
loaded - both get the label corresponding to the kernel SID. The only
way a process that persists from early boot can get a meaningful label
is by doing a voluntary dyntransition or re-executing itself.

Reusing the kernel label for userspace processes is problematic for
several reasons:
1. The kernel is considered to be a privileged domain and generally
needs to have a wide range of permissions allowed to work correctly,
which prevents the policy writer from effectively hardening against
early boot processes that might remain running unintentionally after
the policy is loaded (they represent a potential extra attack surface
that should be mitigated).
2. Despite the kernel being treated as a privileged domain, the policy
writer may want to impose certain special limitations on kernel
threads that may conflict with the requirements of intentional early
boot processes. For example, it is a good hardening practice to limit
what executables the kernel can execute as usermode helpers and to
confine the resulting usermode helper processes. However, a
(legitimate) process surviving from early boot may need to execute a
different set of executables.
3. As currently implemented, overlayfs remembers the security context of
the process that created an overlayfs mount and uses it to bound
subsequent operations on files using this context. If an overlayfs
mount is created before the SELinux policy is loaded, these "mounter"
checks are made against the kernel context, which may clash with
restrictions on the kernel domain (see 2.).

To resolve this, introduce a new initial SID (reusing the slot of the
former "init" initial SID) that will be assigned to any userspace
process started before the policy is first loaded. This is easy to do,
as we can simply label any process that goes through the
bprm_creds_for_exec LSM hook with the new init-SID instead of
propagating the kernel SID from the parent.

To provide backwards compatibility for existing policies that are
unaware of this new semantic of the "init" initial SID, introduce a new
policy capability "userspace_initial_context" and set the "init" SID to
the same context as the "kernel" SID unless this capability is set by
the policy.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

security: Allow all LSMs to provide xattrs for inode_init_security hook

Currently, the LSM infrastructure supports only one LSM providing an xattr
and EVM calculating the HMAC on that xattr, plus other inode metadata.

Allow all LSMs to provide one or multiple xattrs, by extending the security
blob reservation mechanism. Introduce the new lbs_xattr_count field of the
lsm_blob_sizes structure, so that each LSM can specify how many xattrs it
needs, and the LSM infrastructure knows how many xattr slots it should
allocate.

Modify the inode_init_security hook definition, by passing the full
xattr array allocated in security_inode_init_security(), and the current
number of xattr slots in that array filled by LSMs. The first parameter
would allow EVM to access and calculate the HMAC on xattrs supplied by
other LSMs, the second to not leave gaps in the xattr array, when an LSM
requested but did not provide xattrs (e.g. if it is not initialized).

Introduce lsm_get_xattr_slot(), which LSMs can call as many times as the
number specified in the lbs_xattr_count field of the lsm_blob_sizes
structure. During each call, lsm_get_xattr_slot() increments the number of
filled xattrs, so that at the next invocation it returns the next xattr
slot to fill.

Cleanup security_inode_init_security(). Unify the !initxattrs and
initxattrs case by simply not allocating the new_xattrs array in the
former. Update the documentation to reflect the changes, and fix the
description of the xattr name, as it is not allocated anymore.

Adapt both SELinux and Smack to use the new definition of the
inode_init_security hook, and to call lsm_get_xattr_slot() to obtain and
fill the reserved slots in the xattr array.

Move the xattr->name assignment after the xattr->value one, so that it is
done only in case of successful memory allocation.

Finally, change the default return value of the inode_init_security hook
from zero to -EOPNOTSUPP, so that BPF LSM correctly follows the hook
conventions.

Reported-by: Nicolas Bouchinet <nicolas.bouchinet@clip-os.org>
Link: https://lore.kernel.org/linux-integrity/Y1FTSIo+1x+4X0LS@archlinux/
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: minor comment and variable tweaks, approved by RS]
Signed-off-by: Paul Moore <paul@paul-moore.com>

vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing

When NFS superblocks are created by automounting, their LSM parameters
aren't set in the fs_context struct prior to sget_fc() being called,
leading to failure to match existing superblocks.

This bug leads to messages like the following appearing in dmesg when
fscache is enabled:

NFS: Cache volume key already in use (nfs,4.2,2,108,106a8c0,1,,,,100000,100000,2ee,3a98,1d4c,3a98,1)

Fix this by adding a new LSM hook to load fc->security for submount
creation.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/165962680944.3334508.6610023900349142034.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165962729225.3357250.14350728846471527137.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/165970659095.2812394.6868894171102318796.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/166133579016.3678898.6283195019480567275.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/217595.1662033775@warthog.procyon.org.uk/ # v5
Fixes: 9bc61ab18b1d ("vfs: Introduce fs_context, switch vfs_kern_mount() to it.")
Fixes: 779df6a5480f ("NFS: Ensure security label is set for root inode")
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230808-master-v9-1-e0ecde888221@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

selinux: make labeled NFS work when mounted before policy load

Currently, when an NFS filesystem that supports passing LSM/SELinux
labels is mounted during early boot (before the SELinux policy is
loaded), it ends up mounted without the labeling support (i.e. with
Fedora policy all files get the generic NFS label
system_u:object_r:nfs_t:s0).

This is because the information that the NFS mount supports passing
labels (communicated to the LSM layer via the kern_flags argument of
security_set_mnt_opts()) gets lost and when the policy is loaded the
mount is initialized as if the passing is not supported.

Fix this by noting the "native labeling" in newsbsec->flags (using a new
SE_SBNATIVE flag) on the pre-policy-loaded call of
selinux_set_mnt_opts() and then making sure it is respected on the
second call from delayed_superblock_init().

Additionally, make inode_doinit_with_dentry() initialize the inode's
label from its extended attributes whenever it doesn't find it already
intitialized by the filesystem. This is needed to properly initialize
pre-existing inodes when delayed_superblock_init() is called. It should
not trigger in any other cases (and if it does, it's still better to
initialize the correct label instead of leaving the inode unlabeled).

Fixes: eb9ae686507b ("SELinux: Add new labeling type native labels")
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: fixed 'Fixes' tag format]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Implement mptcp_add_subflow hook

Newly added subflows should inherit the LSM label from the associated
MPTCP socket regardless of the current context.

This patch implements the above copying sid and class from the MPTCP
socket context, deleting the existing subflow label, if any, and then
re-creating the correct one.

The new helper reuses the selinux_netlbl_sk_security_free() function,
and the latter can end-up being called multiple times with the same
argument; we additionally need to make it idempotent.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: declare read-only data arrays const

The array of mount tokens in only used in match_opt_prefix() and never
modified.

The array of symtab names is never modified and only used in the
DEBUG_HASHES configuration as output.

The array of files for the SElinux filesystem sub-directory `ss` is
similar to the other `struct tree_descr` usages only read from to
construct the containing entries.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: adjust typos in comments

Found by codespell(1)

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove the runtime disable functionality

After working with the larger SELinux-based distros for several
years, we're finally at a place where we can disable the SELinux
runtime disable functionality. The existing kernel deprecation
notice explains the functionality and why we want to remove it:

The selinuxfs "disable" node allows SELinux to be disabled at
runtime prior to a policy being loaded into the kernel. If
disabled via this mechanism, SELinux will remain disabled until
the system is rebooted.

The preferred method of disabling SELinux is via the "selinux=0"
boot parameter, but the selinuxfs "disable" node was created to
make it easier for systems with primitive bootloaders that did not
allow for easy modification of the kernel command line.
Unfortunately, allowing for SELinux to be disabled at runtime makes
it difficult to secure the kernel's LSM hooks using the
"__ro_after_init" feature.

It is that last sentence, mentioning the '__ro_after_init' hardening,
which is the real motivation for this change, and if you look at the
diffstat you'll see that the impact of this patch reaches across all
the different LSMs, helping prevent tampering at the LSM hook level.

From a SELinux perspective, it is important to note that if you
continue to disable SELinux via "/etc/selinux/config" it may appear
that SELinux is disabled, but it is simply in an uninitialized state.
If you load a policy with `load_policy -i`, you will see SELinux
come alive just as if you had loaded the policy during early-boot.

It is also worth noting that the "/sys/fs/selinux/disable" file is
always writable now, regardless of the Kconfig settings, but writing
to the file has no effect on the system, other than to display an
error on the console if a non-zero/true value is written.

Finally, in the several years where we have been working on
deprecating this functionality, there has only been one instance of
someone mentioning any user visible breakage. In this particular
case it was an individual's kernel test system, and the workaround
documented in the deprecation notice ("selinux=0" on the kernel
command line) resolved the issue without problem.

Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove the 'checkreqprot' functionality

We originally promised that the SELinux 'checkreqprot' functionality
would be removed no sooner than June 2021, and now that it is March
2023 it seems like it is a good time to do the final removal. The
deprecation notice in the kernel provides plenty of detail on why
'checkreqprot' is not desirable, with the key point repeated below:

This was a compatibility mechanism for legacy userspace and
for the READ_IMPLIES_EXEC personality flag. However, if set to
1, it weakens security by allowing mappings to be made executable
without authorization by policy. The default value of checkreqprot
at boot was changed starting in Linux v4.4 to 0 (i.e. check the
actual protection), and Android and Linux distributions have been
explicitly writing a "0" to /sys/fs/selinux/checkreqprot during
initialization for some time.

Along with the official deprecation notice, we have been discussing
this on-list and directly with several of the larger SELinux-based
distros and everyone is happy to see this feature finally removed.
In an attempt to catch all of the smaller, and DIY, Linux systems
we have been writing a deprecation notice URL into the kernel log,
along with a growing ssleep() penalty, when admins enabled
checkreqprot at runtime or via the kernel command line. We have
yet to have anyone come to us and raise an objection to the
deprecation or planned removal.

It is worth noting that while this patch removes the checkreqprot
functionality, it leaves the user visible interfaces (kernel command
line and selinuxfs file) intact, just inert. This should help
prevent breakages with existing userspace tools that correctly, but
unnecessarily, disable checkreqprot at boot or runtime. Admins
that attempt to enable checkreqprot will be met with a removal
message in the kernel log.

Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: stop passing selinux_state pointers and their offspring

Linus observed that the pervasive passing of selinux_state pointers
introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux
state") adds overhead and complexity without providing any
benefit. The original idea was to pave the way for SELinux namespaces
but those have not yet been implemented and there isn't currently
a concrete plan to do so. Remove the passing of the selinux_state
pointers, reverting to direct use of the single global selinux_state,
and likewise remove passing of child pointers like the selinux_avc.
The selinux_policy pointer remains as it is needed for atomic switching
of policies.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

fs: port inode_owner_or_capable() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port acl to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port xattr to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

fs: port ->permission() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

lsm: make security_socket_getpeersec_stream() sockptr_t safe

Commit 4ff09db1b79b ("bpf: net: Change sk_getsockopt() to take the
sockptr_t argument") made it possible to call sk_getsockopt()
with both user and kernel address space buffers through the use of
the sockptr_t type. Unfortunately at the time of conversion the
security_socket_getpeersec_stream() LSM hook was written to only
accept userspace buffers, and in a desire to avoid having to change
the LSM hook the commit author simply passed the sockptr_t's
userspace buffer pointer. Since the only sk_getsockopt() callers
at the time of conversion which used kernel sockptr_t buffers did
not allow SO_PEERSEC, and hence the
security_socket_getpeersec_stream() hook, this was acceptable but
also very fragile as future changes presented the possibility of
silently passing kernel space pointers to the LSM hook.

There are several ways to protect against this, including careful
code review of future commits, but since relying on code review to
catch bugs is a recipe for disaster and the upstream eBPF maintainer
is "strongly against defensive programming", this patch updates the
LSM hook, and all of the implementations to support sockptr_t and
safely handle both user and kernel space buffers.

Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: implement get, set and remove acl hook

The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.

I spent considerate time in the security module infrastructure and
audited all codepaths. SELinux has no restrictions based on the posix
acl values passed through it. The capability hook doesn't need to be
called either because it only has restrictions on security.* xattrs. So
these are all fairly simply hooks for SELinux.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

->getprocattr(): attribute name is const char *, TYVM...

cast of ->d_name.name to char * is completely wrong - nothing is
allowed to modify its contents.

Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: remove the unneeded result variable

Return the value avc_has_perm() directly instead of storing it in
another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Implement userns_create hook

Unprivileged user namespace creation is an intended feature to enable
sandboxing, however this feature is often used to as an initial step to
perform a privilege escalation attack.

This patch implements a new user_namespace { create } access control
permission to restrict which domains allow or deny user namespace
creation. This is necessary for system administrators to quickly protect
their systems while waiting for vulnerability patches to be applied.

This permission can be used in the following way:

allow domA_t domA_t : user_namespace { create };

Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: implement the security_uring_cmd() LSM hook

Add a SELinux access control for the iouring IORING_OP_URING_CMD
command. This includes the addition of a new permission in the
existing "io_uring" object class: "cmd". The subject of the new
permission check is the domain of the process requesting access, the
object is the open file which points to the device/file that is the
target of the IORING_OP_URING_CMD operation. A sample policy rule
is shown below:

allow <domain> <file>:io_uring { cmd };

Cc: stable@vger.kernel.org
Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: selinux_add_opt() callers free memory

The selinux_add_opt() function may need to allocate memory for the
mount options if none has already been allocated, but there is no
need to free that memory on error as the callers handle that. Drop
the existing kfree() on error to help increase consistency in the
selinux_add_opt() error handling.

This patch also changes selinux_add_opt() to return -EINVAL when
the mount option value, @s, is NULL. It currently return -ENOMEM.

Link: https://lore.kernel.org/lkml/20220611090550.135674-1-xiujianfeng@huawei.com/T/
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: fix subject, rework commit description language]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix typos in comments

Signed-off-by: Jonas Lindner <jolindner@gmx.de>
[PM: fixed duplicated subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: drop unnecessary NULL check

Commit e3489f8974e1 ("selinux: kill selinux_sb_get_mnt_opts()")
introduced a NULL check on the context after a successful call to
security_sid_to_context(). This is on the one hand redundant after
checking for success and on the other hand insufficient on an actual
NULL pointer, since the context is passed to seq_escape() leading to a
call of strlen() on it.

Reported by Clang analyzer:

In file included from security/selinux/hooks.c:28:
In file included from ./include/linux/tracehook.h:50:
In file included from ./include/linux/memcontrol.h:13:
In file included from ./include/linux/cgroup.h:18:
./include/linux/seq_file.h:136:25: warning: Null pointer passed as 1st argument to string length function [unix.cstring.NullArg]
seq_escape_mem(m, src, strlen(src), flags, esc);
^~~~~~~~~~~

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: free contexts previously transferred in selinux_add_opt()

`selinux_add_opt()` stopped taking ownership of the passed context since
commit 70f4169ab421 ("selinux: parse contexts for mount options early").

unreferenced object 0xffff888114dfd140 (size 64):
comm "mount", pid 15182, jiffies 4295687028 (age 796.340s)
hex dump (first 32 bytes):
73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f system_u:object_
72 3a 74 65 73 74 5f 66 69 6c 65 73 79 73 74 65 r:test_filesyste
backtrace:
[<ffffffffa07dbef4>] kmemdup_nul+0x24/0x80
[<ffffffffa0d34253>] selinux_sb_eat_lsm_opts+0x293/0x560
[<ffffffffa0d13f08>] security_sb_eat_lsm_opts+0x58/0x80
[<ffffffffa0af1eb2>] generic_parse_monolithic+0x82/0x180
[<ffffffffa0a9c1a5>] do_new_mount+0x1f5/0x550
[<ffffffffa0a9eccb>] path_mount+0x2ab/0x1570
[<ffffffffa0aa019e>] __x64_sys_mount+0x20e/0x280
[<ffffffffa1f47124>] do_syscall_64+0x34/0x80
[<ffffffffa200007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

unreferenced object 0xffff888108e71640 (size 64):
comm "fsmount", pid 7607, jiffies 4295044974 (age 1601.016s)
hex dump (first 32 bytes):
73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f system_u:object_
72 3a 74 65 73 74 5f 66 69 6c 65 73 79 73 74 65 r:test_filesyste
backtrace:
[<ffffffff861dc2b1>] memdup_user+0x21/0x90
[<ffffffff861dc367>] strndup_user+0x47/0xa0
[<ffffffff864f6965>] __do_sys_fsconfig+0x485/0x9f0
[<ffffffff87940124>] do_syscall_64+0x34/0x80
[<ffffffff87a0007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Cc: stable@vger.kernel.org
Fixes: 70f4169ab421 ("selinux: parse contexts for mount options early")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: log anon inode class name

Log the anonymous inode class name in the security hook
inode_init_security_anon. This name is the key for name based type
transitions on the anon_inode security class on creation. Example:

type=AVC msg=audit(02/16/22 22:02:50.585:216) : avc: granted \
{ create } for pid=2136 comm=mariadbd anonclass=[io_uring] \
scontext=system_u:system_r:mysqld_t:s0 \
tcontext=system_u:system_r:mysqld_iouring_t:s0 tclass=anon_inode

Add a new LSM audit data type holding the inode and the class name.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: adjusted 'anonclass' to be a trusted string, cgzones approved]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: checkreqprot is deprecated, add some ssleep() discomfort

The checkreqprot functionality was disabled by default back in
Linux v4.4 (2015) with commit 2a35d196c160e3 ("selinux: change
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default") and it was
officially marked as deprecated in Linux v5.7. It was always a
bit of a hack to workaround very old userspace and to the best of
our knowledge, the checkreqprot functionality has been disabled by
Linux distributions for quite some time.

This patch moves the deprecation messages from KERN_WARNING to
KERN_ERR and adds a five second sleep to anyone using it to help
draw their attention to the deprecation and provide a URL which
helps explain things in more detail.

Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Remove redundant assignments

Get rid of redundant assignments which end up in values not being
read either because they are overwritten or the function ends.

Reported by clang-tidy [deadcode.DeadStores]

Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

tracehook: Remove tracehook.h

Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.

Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

selinux: allow FIOCLEX and FIONCLEX with policy capability

These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too. Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.

As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.

Based-on-patch-by: Demi Marie Obenour <demiobenour@gmail.com>
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: drop return statement at end of void functions

Those return statements at the end of a void function are redundant.

Reported by clang-tidy [readability-redundant-control-flow]

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

security: implement sctp_assoc_established hook in selinux

Do this by extracting the peer labeling per-association logic from
selinux_sctp_assoc_request() into a new helper
selinux_sctp_process_new_assoc() and use this helper in both
selinux_sctp_assoc_request() and selinux_sctp_assoc_established(). This
ensures that the peer labeling behavior as documented in
Documentation/security/SCTP.rst is applied both on the client and server
side:
"""
An SCTP socket will only have one peer label assigned to it. This will be
assigned during the establishment of the first association. Any further
associations on this socket will have their packet peer label compared to
the sockets peer label, and only if they are different will the
``association`` permission be validated. This is validated by checking the
socket peer sid against the received packets peer sid to determine whether
the association should be allowed or denied.
"""

At the same time, it also ensures that the peer label of the association
is set to the correct value, such that if it is peeled off into a new
socket, the socket's peer label will then be set to the association's
peer label, same as it already works on the server side.

While selinux_inet_conn_established() (which we are replacing by
selinux_sctp_assoc_established() for SCTP) only deals with assigning a
peer label to the connection (socket), in case of SCTP we need to also
copy the (local) socket label to the association, so that
selinux_sctp_sk_clone() can then pick it up for the new socket in case
of SCTP peeloff.

Careful readers will notice that the selinux_sctp_process_new_assoc()
helper also includes the "IPv4 packet received over an IPv6 socket"
check, even though it hadn't been in selinux_sctp_assoc_request()
before. While such check is not necessary in
selinux_inet_conn_request() (because struct request_sock's family field
is already set according to the skb's family), here it is needed, as we
don't have request_sock and we take the initial family from the socket.
In selinux_sctp_assoc_established() it is similarly needed as well (and
also selinux_inet_conn_established() already has it).

Fixes: 72e89f50084c ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Based-on-patch-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: parse contexts for mount options early

Commit b8b87fd954b4 ("selinux: Fix selinux_sb_mnt_opts_compat()")
started to parse mount options into SIDs in selinux_add_opt() if policy
has already been loaded. Since it's extremely unlikely that anyone would
depend on the ability to set SELinux contexts on fs_context before
loading the policy and then mounting that context after simplify the
logic by always parsing the options early.

Note that the multi-step mounting is only possible with the new
fscontext mount API and wasn't possible before its introduction.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: various sparse fixes

When running the SELinux code through sparse, there are a handful of
warnings. This patch resolves some of these warnings caused by
"__rcu" mismatches.

% make W=1 C=1 security/selinux/

Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: try to use preparsed sid before calling parse_sid()

Avoid unnecessary parsing of sids that have already been parsed via
selinux_sb_eat_lsm_opts().

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Fix selinux_sb_mnt_opts_compat()

selinux_sb_mnt_opts_compat() is called under the sb_lock spinlock and
shouldn't be performing any memory allocations. Fix this by parsing the
sids at the same time we're chopping up the security mount options
string and then using the pre-parsed sids when doing the comparison.

Fixes: cc274ae7763d ("selinux: fix sleeping function called from invalid context")
Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: general protection fault in legacy_parse_param

The usual LSM hook "bail on fail" scheme doesn't work for cases where
a security module may return an error code indicating that it does not
recognize an input. In this particular case Smack sees a mount option
that it recognizes, and returns 0. A call to a BPF hook follows, which
returns -ENOPARAM, which confuses the caller because Smack has processed
its data.

The SELinux hook incorrectly returns 1 on success. There was a time
when this was correct, however the current expectation is that it
return 0 on success. This is repaired.

Reported-by: syzbot+d1e3b1d92d25abf97943@syzkaller.appspotmail.com
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix a type cast problem in cred_init_security()

In the process of removing an explicit type cast to preserve a cred
const qualifier in cred_init_security() we ran into a problem where
the task_struct::real_cred field is defined with the "__rcu"
attribute but the selinux_cred() function parameter is not, leading
to a sparse warning:

security/selinux/hooks.c:216:36: sparse: sparse:
incorrect type in argument 1 (different address spaces)
@@ expected struct cred const *cred
@@ got struct cred const [noderef] __rcu *real_cred

As we don't want to add the "__rcu" attribute to the selinux_cred()
parameter, we're going to add an explicit cast back to
cred_init_security().

Fixes: b084e189b01a ("selinux: simplify cred_init_security")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: simplify cred_init_security

The parameter of selinux_cred() is declared const, so an explicit cast
dropping the const qualifier is not necessary. Without the cast the
local variable cred serves no purpose.

Reported by clang [-Wcast-qual]

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: access superblock_security_struct in LSM blob way

LSM blob has been involved for superblock's security struct. So fix the
remaining direct access to sb->s_security by using the LSM blob
mechanism.

Fixes: 08abe46b2cfc ("selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support")
Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: minor tweaks to selinux_add_opt()

Two minor edits to selinux_add_opt(): use "sizeof(*ptr)" instead of
"sizeof(type)" in the kzalloc() call, and rename the "Einval" jump
target to "err" for the sake of consistency.

Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix potential memleak in selinux_add_opt()

This patch try to fix potential memleak in error branch.

Fixes: ba6418623385 ("selinux: new helper - selinux_add_opt()")
Signed-off-by: Bernard Zhao <bernard@vivo.com>
[PM: tweak the subject line, add Fixes tag]
Signed-off-by: Paul Moore <paul@paul-moore.com>

security,selinux: remove security_add_mnt_opt()

Its last user has been removed in commit f2aedb713c28 ("NFS: Add
fs_context support.").

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()

The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.

Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: initialize proto variable in selinux_ip_postroute_compat()

Clang static analysis reports this warning

hooks.c:5765:6: warning: 4th function call argument is an uninitialized
value
if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

selinux_parse_skb() can return ok without setting proto. The later call
to selinux_xfrm_postroute_last() does an early check of proto and can
return ok if the garbage proto value matches. So initialize proto.

Cc: stable@vger.kernel.org
Fixes: eef9b41622f2 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()")
Signed-off-by: Tom Rix <trix@redhat.com>
[PM: typo/spelling and checkpatch.pl description fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix sleeping function called from invalid context

selinux_sb_mnt_opts_compat() is called via sget_fc() under the sb_lock
spinlock, so it can't use GFP_KERNEL allocations:

[ 868.565200] BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:230
[ 868.568246] in_atomic(): 1, irqs_disabled(): 0,
non_block: 0, pid: 4914, name: mount.nfs
[ 868.569626] preempt_count: 1, expected: 0
[ 868.570215] RCU nest depth: 0, expected: 0
[ 868.570809] Preemption disabled at:
[ 868.570810] [<0000000000000000>] 0x0
[ 868.571848] CPU: 1 PID: 4914 Comm: mount.nfs Kdump: loaded
Tainted: G W 5.16.0-rc5.2585cf9dfa #1
[ 868.573273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS 1.14.0-4.fc34 04/01/2014
[ 868.574478] Call Trace:
[ 868.574844] <TASK>
[ 868.575156] dump_stack_lvl+0x34/0x44
[ 868.575692] __might_resched.cold+0xd6/0x10f
[ 868.576308] slab_pre_alloc_hook.constprop.0+0x89/0xf0
[ 868.577046] __kmalloc_track_caller+0x72/0x420
[ 868.577684] ? security_context_to_sid_core+0x48/0x2b0
[ 868.578569] kmemdup_nul+0x22/0x50
[ 868.579108] security_context_to_sid_core+0x48/0x2b0
[ 868.579854] ? _nfs4_proc_pathconf+0xff/0x110 [nfsv4]
[ 868.580742] ? nfs_reconfigure+0x80/0x80 [nfs]
[ 868.581355] security_context_str_to_sid+0x36/0x40
[ 868.581960] selinux_sb_mnt_opts_compat+0xb5/0x1e0
[ 868.582550] ? nfs_reconfigure+0x80/0x80 [nfs]
[ 868.583098] security_sb_mnt_opts_compat+0x2a/0x40
[ 868.583676] nfs_compare_super+0x113/0x220 [nfs]
[ 868.584249] ? nfs_try_mount_request+0x210/0x210 [nfs]
[ 868.584879] sget_fc+0xb5/0x2f0
[ 868.585267] nfs_get_tree_common+0x91/0x4a0 [nfs]
[ 868.585834] vfs_get_tree+0x25/0xb0
[ 868.586241] fc_mount+0xe/0x30
[ 868.586605] do_nfs4_mount+0x130/0x380 [nfsv4]
[ 868.587160] nfs4_try_get_tree+0x47/0xb0 [nfsv4]
[ 868.587724] vfs_get_tree+0x25/0xb0
[ 868.588193] do_new_mount+0x176/0x310
[ 868.588782] __x64_sys_mount+0x103/0x140
[ 868.589388] do_syscall_64+0x3b/0x90
[ 868.589935] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 868.590699] RIP: 0033:0x7f2b371c6c4e
[ 868.591239] Code: 48 8b 0d dd 71 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e
0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00
00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d aa 71
0e 00 f7 d8 64 89 01 48
[ 868.593810] RSP: 002b:00007ffc83775d88 EFLAGS: 00000246
ORIG_RAX: 00000000000000a5
[ 868.594691] RAX: ffffffffffffffda RBX: 00007ffc83775f10 RCX: 00007f2b371c6c4e
[ 868.595504] RDX: 0000555d517247a0 RSI: 0000555d51724700 RDI: 0000555d51724540
[ 868.596317] RBP: 00007ffc83775f10 R08: 0000555d51726890 R09: 0000555d51726890
[ 868.597162] R10: 0000000000000000 R11: 0000000000000246 R12: 0000555d51726890
[ 868.598005] R13: 0000000000000003 R14: 0000555d517246e0 R15: 0000555d511ac925
[ 868.598826] </TASK>

Cc: stable@vger.kernel.org
Fixes: 69c4a42d72eb ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
[PM: cleanup/line-wrap the backtrace]
Signed-off-by: Paul Moore <paul@paul-moore.com>

net,lsm,selinux: revert the security_sctp_assoc_established() hook

This patch reverts two prior patches, e7310c94024c
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e6a ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.

Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.

Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net,lsm,selinux: revert the security_sctp_assoc_established() hook

This patch reverts two prior patches, e7310c94024c
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e6a ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.

Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.

Signed-off-by: Paul Moore <paul@paul-moore.com>

security: implement sctp_assoc_established hook in selinux

Different from selinux_inet_conn_established(), it also gives the
secid to asoc->peer_secid in selinux_sctp_assoc_established(),
as one UDP-type socket may have more than one asocs.

Note that peer_secid in asoc will save the peer secid for this
asoc connection, and peer_sid in sksec will just keep the peer
secid for the latest connection. So the right use should be do
peeloff for UDP-type socket if there will be multiple asocs in
one socket, so that the peeloff socket has the right label for
its asoc.

v1->v2:
- call selinux_inet_conn_established() to reduce some code
duplication in selinux_sctp_assoc_established(), as Ondrej
suggested.
- when doing peeloff, it calls sock_create() where it actually
gets secid for socket from socket_sockcreate_sid(). So reuse
SECSID_WILD to ensure the peeloff socket keeps using that
secid after calling selinux_sctp_sk_clone() for client side.

Fixes: 72e89f50084c ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

security: pass asoc to sctp_assoc_request and sctp_sk_clone

This patch is to move secid and peer_secid from endpoint to association,
and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As
ep is the local endpoint and asoc represents a connection, and in SCTP
one sk/ep could have multiple asoc/connection, saving secid/peer_secid
for new asoc will overwrite the old asoc's.

Note that since asoc can be passed as NULL, security_sctp_assoc_request()
is moved to the place right after the new_asoc is created in
sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init().

v1->v2:
- fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed.
- fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed.

Fixes: 72e89f50084c ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

security: Return xattr name from security_dentry_init_security()

Right now security_dentry_init_security() only supports single security
label and is used by SELinux only. There are two users of this hook,
namely ceph and nfs.

NFS does not care about xattr name. Ceph hardcodes the xattr name to
security.selinux (XATTR_NAME_SELINUX).

I am making changes to fuse/virtiofs to send security label to virtiofsd
and I need to send xattr name as well. I also hardcoded the name of
xattr to security.selinux.

Stephen Smalley suggested that it probably is a good idea to modify
security_dentry_init_security() to also return name of xattr so that
we can avoid this hardcoding in the callers.

This patch adds a new parameter "const char **xattr_name" to
security_dentry_init_security() and LSM puts the name of xattr
too if caller asked for it (xattr_name != NULL).

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
[PM: fixed typos in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix a sock regression in selinux_ip_postroute_compat()

Unfortunately we can't rely on nf_hook_state->sk being the proper
originating socket so revert to using skb_to_full_sk(skb).

Fixes: 1d1e1ded1356 ("selinux: make better use of the nf_hook_state passed to the NF hooks")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>

binder: use cred instead of task for selinux checks

Since binder was integrated with selinux, it has passed
'struct task_struct' associated with the binder_proc
to represent the source and target of transactions.
The conversion of task to SID was then done in the hook
implementations. It turns out that there are race conditions
which can result in an incorrect security context being used.

Fix by using the 'struct cred' saved during binder_open and pass
it to the selinux subsystem.

Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables)
Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: make better use of the nf_hook_state passed to the NF hooks

This patch builds on a previous SELinux/netfilter patch by Florian
Westphal and makes better use of the nf_hook_state variable passed
into the SELinux/netfilter hooks as well as a number of other small
cleanups in the related code.

Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove unneeded ipv6 hook wrappers

Netfilter places the protocol number the hook function is getting called
from in state->pf, so we can use that instead of an extra wrapper.

While at it, remove one-line wrappers too and make
selinux_ip_{out,forward,postroute} useable as hook function.

Signed-off-by: Florian Westphal <fw@strlen.de>
Message-Id: <20211011202229.28289-1-fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove the SELinux lockdown implementation

NOTE: This patch intentionally omits any "Fixes:" metadata or stable
tagging since it removes a SELinux access control check; while
removing the control point is the right thing to do moving forward,
removing it in stable kernels could be seen as a regression.

The original SELinux lockdown implementation in 59438b46471a
("security,lockdown,selinux: implement SELinux lockdown") used the
current task's credentials as both the subject and object in the
SELinux lockdown hook, selinux_lockdown(). Unfortunately that
proved to be incorrect in a number of cases as the core kernel was
calling the LSM lockdown hook in places where the credentials from
the "current" task_struct were not the correct credentials to use
in the SELinux access check.

Attempts were made to resolve this by adding a credential pointer
to the LSM lockdown hook as well as suggesting that the single hook
be split into two: one for user tasks, one for kernel tasks; however
neither approach was deemed acceptable by Linus. Faced with the
prospect of either changing the subj/obj in the access check to a
constant context (likely the kernel's label) or removing the SELinux
lockdown check entirely, the SELinux community decided that removing
the lockdown check was preferable.

The supporting changes to the general LSM layer are left intact, this
patch only removes the SELinux implementation.

Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: enable genfscon labeling for securityfs

Add support for genfscon per-file labeling of securityfs files.
This allows for separate labels and thereby access control for
different files. For example a genfscon statement

genfscon securityfs /integrity/ima/policy \
system_u:object_r:ima_policy_t:s0

will set a private label to the IMA policy file and thus allow to
control the ability to set the IMA policy. Setting labels directly
with setxattr(2), e.g. by chcon(1) or setfiles(8), is still not
supported.

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: line width fixes in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: add support for the io_uring access controls

This patch implements two new io_uring access controls, specifically
support for controlling the io_uring "personalities" and
IORING_SETUP_SQPOLL. Controlling the sharing of io_urings themselves
is handled via the normal file/inode labeling and sharing mechanisms.

The io_uring { override_creds } permission restricts which domains
the subject domain can use to override it's own credentials.
Granting a domain the io_uring { override_creds } permission allows
it to impersonate another domain in io_uring operations.

The io_uring { sqpoll } permission restricts which domains can create
asynchronous io_uring polling threads. This is important from a
security perspective as operations queued by this asynchronous thread
inherit the credentials of the thread creator by default; if an
io_uring is shared across process/domain boundaries this could result
in one domain impersonating another. Controlling the creation of
sqpoll threads, and the sharing of io_urings across processes, allow
policy authors to restrict the ability of one domain to impersonate
another via io_uring.

As a quick summary, this patch adds a new object class with two
permissions:

io_uring { override_creds sqpoll }

These permissions can be seen in the two simple policy statements
below:

allow domA_t domB_t : io_uring { override_creds };
allow domA_t self : io_uring { sqpoll };

Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux,smack: fix subjective/objective credential use mixups

Jann Horn reported a problem with commit eb1231f73c4d ("selinux:
clarify task subjective and objective credentials") where some LSM
hooks were attempting to access the subjective credentials of a task
other than the current task. Generally speaking, it is not safe to
access another task's subjective credentials and doing so can cause
a number of problems.

Further, while looking into the problem, I realized that Smack was
suffering from a similar problem brought about by a similar commit
1fb057dcde11 ("smack: differentiate between subjective and objective
task credentials").

This patch addresses this problem by restoring the use of the task's
objective credentials in those cases where the task is other than the
current executing task. Not only does this resolve the problem
reported by Jann, it is arguably the correct thing to do in these
cases.

Cc: stable@vger.kernel.org
Fixes: eb1231f73c4d ("selinux: clarify task subjective and objective credentials")
Fixes: 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials")
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

mctp: Add MCTP base

Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

selinux: return early for possible NULL audit buffers

audit_log_start() may return NULL in below cases:

- when audit is not initialized.
- when audit backlog limit exceeds.

After the call to audit_log_start() is made and then possible NULL audit
buffer argument is passed to audit_log_*() functions,
audit_log_*() functions return immediately in case of a NULL audit buffer
argument.

But it is optimal to return early when audit_log_start() returns NULL,
because it is not necessary for audit_log_*() functions to be called with
NULL audit buffer argument.

So add exception handling for possible NULL audit buffers where
return value can be handled from callers.

Signed-off-by: Austin Kim <austin.kim@lge.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: kill 'flags' argument in avc_has_perm_flags() and avc_audit()

... along with avc_has_perm_flags() itself, since now it's identical
to avc_has_perm() (as pointed out by Paul Moore)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[PM: add "selinux:" prefix to subj and tweak for length]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: slow_avc_audit has become non-blocking

dump_common_audit_data() is safe to use under rcu_read_lock() now;
no need for AVC_NONBLOCKING and games around it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm_audit,selinux: pass IB device name by reference

While trying to address a Coverity warning that the dev_name string
might end up unterminated when strcpy'ing it in
selinux_ib_endport_manage_subnet(), I realized that it is possible (and
simpler) to just pass the dev_name pointer directly, rather than copying
the string to a buffer.

The ibendport variable goes out of scope at the end of the function
anyway, so the lifetime of the dev_name pointer will never be shorter
than that of ibendport, thus we can safely just pass the dev_name
pointer and be done with it.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: Infrastructure management of the superblock

Move management of the superblock->sb_security blob out of the
individual security modules and into the security infrastructure.
Instead of allocating the blobs from within the modules, the modules
tell the infrastructure how much space is required, and the space is
allocated there.

Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-6-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>

selinux: clarify task subjective and objective credentials

SELinux has a function, task_sid(), which returns the task's
objective credentials, but unfortunately is used in a few places
where the subjective task credentials should be used. Most notably
in the new security_task_getsecid_subj() LSM hook.

This patch fixes this and attempts to make things more obvious by
introducing a new function, task_sid_subj(), and renaming the
existing task_sid() function to task_sid_obj().

This patch also adds an interesting function in task_sid_binder().
The task_sid_binder() function has a comment which hopefully
describes it's reason for being, but it basically boils down to the
simple fact that we can't safely access another task's subjective
credentials so in the case of binder we need to stick with the
objective credentials regardless.

Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm: separate security_task_getsecid() into subjective and objective variants

Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.

This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.

void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);

While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.

Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

lsm,selinux: add new hook to compare new mount to an existing mount

Add a new hook that takes an existing super block and a new mount
with new options and determines if new options confict with an
existing mount or not.

A filesystem can use this new hook to determine if it can share
the an existing superblock with a new superblock for the new mount.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[PM: tweak the subject line, fix tab/space problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Allow context mounts for unpriviliged overlayfs

Now overlayfs allow unpriviliged mounts. That is root inside a non-init
user namespace can mount overlayfs. This is being added in 5.11 kernel.

Giuseppe tried to mount overlayfs with option "context" and it failed
with error -EACCESS.

$ su test
$ unshare -rm
$ mkdir -p lower upper work merged
$ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper,userxattr,context='system_u:object_r:container_file_t:s0' none merged

This fails with -EACCESS. It works if option "-o context" is not specified.

Little debugging showed that selinux_set_mnt_opts() returns -EACCESS.

So this patch adds "overlay" to the list, where it is fine to specific
context from non init_user_ns.

Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
[PM: trimmed the changelog from the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>

commoncap: handle idmapped mounts

When interacting with user namespace and non-user namespace aware
filesystem capabilities the vfs will perform various security checks to
determine whether or not the filesystem capabilities can be used by the
caller, whether they need to be removed and so on. The main
infrastructure for this resides in the capability codepaths but they are
called through the LSM security infrastructure even though they are not
technically an LSM or optional. This extends the existing security hooks
security_inode_removexattr(), security_inode_killpriv(),
security_inode_getsecurity() to pass down the mount's user namespace and
makes them aware of idmapped mounts.

In order to actually get filesystem capabilities from disk the
capability infrastructure exposes the get_vfs_caps_from_disk() helper.
For user namespace aware filesystem capabilities a root uid is stored
alongside the capabilities.

In order to determine whether the caller can make use of the filesystem
capability or whether it needs to be ignored it is translated according
to the superblock's user namespace. If it can be translated to uid 0
according to that id mapping the caller can use the filesystem
capabilities stored on disk. If we are accessing the inode that holds
the filesystem capabilities through an idmapped mount we map the root
uid according to the mount's user namespace. Afterwards the checks are
identical to non-idmapped mounts: reading filesystem caps from disk
enforces that the root uid associated with the filesystem capability
must have a mapping in the superblock's user namespace and that the
caller is either in the same user namespace or is a descendant of the
superblock's user namespace. For filesystems that are mountable inside
user namespace the caller can just mount the filesystem and won't
usually need to idmap it. If they do want to idmap it they can create an
idmapped mount and mark it with a user namespace they created and which
is thus a descendant of s_user_ns. For filesystems that are not
mountable inside user namespaces the descendant rule is trivially true
because the s_user_ns will be the initial user namespace.

If the initial user namespace is passed nothing changes so non-idmapped
mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

xattr: handle idmapped mounts

When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.

Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

inode: make init and permission helpers idmapped mount aware

The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

selinux: teach SELinux about anonymous inodes

This change uses the anon_inodes and LSM infrastructure introduced in
the previous patches to give SELinux the ability to control
anonymous-inode files that are created using the new
anon_inode_getfd_secure() function.

A SELinux policy author detects and controls these anonymous inodes by
adding a name-based type_transition rule that assigns a new security
type to anonymous-inode files created in some domain. The name used
for the name-based transition is the name associated with the
anonymous inode for file listings --- e.g., "[userfaultfd]" or
"[perf_event]".

Example:

type uffd_t;
type_transition sysadm_t sysadm_t : anon_inode uffd_t "[userfaultfd]";
allow sysadm_t uffd_t:anon_inode { create };

(The next patch in this series is necessary for making userfaultfd
support this new interface. The example above is just
for exposition.)

Signed-off-by: Daniel Colascione <dancol@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support

When a superblock is assigned the SECURITY_FS_USE_XATTR behavior by the
policy yet it lacks xattr support, try to fall back to genfs rather than
rejecting the mount. If a genfscon rule is found for the filesystem,
then change the behavior to SECURITY_FS_USE_GENFS, otherwise reject the
mount as before. A similar fallback is already done in security_fs_use()
if no behavior specification is found for the given filesystem.

This is needed e.g. for virtiofs, which may or may not support xattrs
depending on the backing host filesystem.

Example:
# seinfo --genfs | grep ' ramfs'
genfscon ramfs / system_u:object_r:ramfs_t:s0
# echo '(fsuse xattr ramfs (system_u object_r fs_t ((s0) (s0))))' >ramfs_xattr.cil
# semodule -i ramfs_xattr.cil
# mount -t ramfs none /mnt

Before:
mount: /mnt: mount(2) system call failed: Operation not supported.

After:
(mount succeeds)
# ls -Zd /mnt
system_u:object_r:ramfs_t:s0 /mnt

See also:
https://lore.kernel.org/selinux/20210105142148.GA3200@redhat.com/T/
https://github.com/fedora-selinux/selinux-policy/pull/478

Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix inconsistency between inode_getxattr and inode_listsecurity

When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.

When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr. This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.

This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().

Match the logic of inode_listsecurity to that of inode_getxattr and
do not list the security.selinux xattr if selinux is not initialized.

Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Fixes: c8e222616c7e ("selinux: allow reading labels before policy is loaded")
Cc: stable@vger.kernel.org#v5.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: handle MPTCP consistently with TCP

The MPTCP protocol uses a specific protocol value, even if
it's an extension to TCP. Additionally, MPTCP sockets
could 'fall-back' to TCP at run-time, depending on peer MPTCP
support and available resources.

As a consequence of the specific protocol number, selinux
applies the raw_socket class to MPTCP sockets.

Existing TCP application converted to MPTCP - or forced to
use MPTCP socket with user-space hacks - will need an
updated policy to run successfully.

This change lets selinux attach the TCP socket class to
MPTCP sockets, too, so that no policy changes are needed in
the above scenario.

Note that the MPTCP is setting, propagating and updating the
security context on all the subflows and related request
socket.

Link: https://lore.kernel.org/linux-security-module/CAHC9VhTaK3xx0hEGByD2zxfF7fadyPP1kb-WeWH_YCyq9X-sRg@mail.gmail.com/T/#t
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[PM: tweaked subject's prefix]
Signed-off-by: Paul Moore <paul@paul-moore.com>

security: add const qualifier to struct sock in various places

A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.

However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lsm,selinux: pass flowi_common instead of flowi to the LSM hooks

As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely. As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: drop super_block backpointer from superblock_security_struct

It appears to have been needed for selinux_complete_init() in the past,
but today it's useless.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling

A previous fix, commit 83370b31a915 ("selinux: fix error initialization
in inode_doinit_with_dentry()"), changed how failures were handled
before a SELinux policy was loaded. Unfortunately that patch was
potentially problematic for two reasons: it set the isec->initialized
state without holding a lock, and it didn't set the inode's SELinux
label to the "default" for the particular filesystem. The later can
be a problem if/when a later attempt to revalidate the inode fails
and SELinux reverts to the existing inode label.

This patch should restore the default inode labeling that existed
before the original fix, without affecting the LABEL_INVALID marking
such that revalidation will still be attempted in the future.

Fixes: 83370b31a915 ("selinux: fix error initialization in inode_doinit_with_dentry()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix error initialization in inode_doinit_with_dentry()

Mark the inode security label as invalid if we cannot find
a dentry so that we will retry later rather than marking it
initialized with the unlabeled SID.

Fixes: 9287aed2ad1f ("selinux: Convert isec->lock into a spinlock")
Signed-off-by: Tianyue Ren <rentianyue@kylinos.cn>
[PM: minor comment tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: Add "contents" flag to kernel_read_file hook

As with the kernel_load_data LSM hook, add a "contents" flag to the
kernel_read_file LSM hook that indicates whether the LSM can expect
a matching call to the kernel_post_read_file LSM hook with the full
contents of the file. With the coming addition of partial file read
support for kernel_read_file*() API, the LSM will no longer be able
to always see the entire contents of a file during the read calls.

For cases where the LSM must read examine the complete file contents,
it will need to do so on its own every time the kernel_read_file
hook is called with contents=false (or reject such cases). Adjust all
existing LSMs to retain existing behavior.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-12-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LSM: Introduce kernel_post_load_data() hook

There are a few places in the kernel where LSMs would like to have
visibility into the contents of a kernel buffer that has been loaded or
read. While security_kernel_post_read_file() (which includes the
buffer) exists as a pairing for security_kernel_read_file(), no such
hook exists to pair with security_kernel_load_data().

Earlier proposals for just using security_kernel_post_read_file() with a
NULL file argument were rejected (i.e. "file" should always be valid for
the security_..._file hooks, but it appears at least one case was
left in the kernel during earlier refactoring. (This will be fixed in
a subsequent patch.)

Since not all cases of security_kernel_load_data() can have a single
contiguous buffer made available to the LSM hook (e.g. kexec image
segments are separately loaded), there needs to be a way for the LSM to
reason about its expectations of the hook coverage. In order to handle
this, add a "contents" argument to the "kernel_load_data" hook that
indicates if the newly added "kernel_post_load_data" hook will be called
with the full contents once loaded. That way, LSMs requiring full contents
can choose to unilaterally reject "kernel_load_data" with contents=false
(which is effectively the existing hook coverage), but when contents=true
they can allow it and later evaluate the "kernel_post_load_data" hook
once the buffer is loaded.

With this change, LSMs can gain coverage over non-file-backed data loads
(e.g. init_module(2) and firmware userspace helper), which will happen
in subsequent patches.

Additionally prepare IMA to start processing these cases.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/kernel_read_file: Split into separate include file

Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h
include file. That header gets pulled in just about everywhere
and doesn't really need functions not related to the general fs interface.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com
Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: Add helper functions to get and set checkreqprot

checkreqprot data member in selinux_state struct is accessed directly by
SELinux functions to get and set. This could cause unexpected read or
write access to this data member due to compiler optimizations and/or
compiler's reordering of access to this field.

Add helper functions to get and set checkreqprot data member in
selinux_state struct. These helper functions use READ_ONCE and
WRITE_ONCE macros to ensure atomic read or write of memory for
this data member.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: move policy mutex to selinux_state, use in lockdep checks

Move the mutex used to synchronize policy changes (reloads and setting
of booleans) from selinux_fs_info to selinux_state and use it in
lockdep checks for rcu_dereference_protected() calls in the security
server functions. This makes the dependency on the mutex explicit
in the code rather than relying on comments.

Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: convert policy read-write lock to RCU

Convert the policy read-write lock to RCU. This is significantly
simplified by the earlier work to encapsulate the policy data
structures and refactor the policy load and boolean setting logic.
Move the latest_granting sequence number into the selinux_policy
structure so that it can be updated atomically with the policy.
Since removing the policy rwlock and moving latest_granting reduces
the selinux_ss structure to nothing more than a wrapper around the
selinux_policy pointer, get rid of the extra layer of indirection.

At present this change merely passes a hardcoded 1 to
rcu_dereference_check() in the cases where we know we do not need to
take rcu_read_lock(), with the preceding comment explaining why.
Alternatively we could pass fsi->mutex down from selinuxfs and
apply a lockdep check on it instead.

Based in part on earlier attempts to convert the policy rwlock
to RCU by Kaigai Kohei [1] and by Peter Enderborg [2].

[1] https://lore.kernel.org/selinux/6e2f9128-e191-ebb3-0e87-74bfccb0767f@tycho.nsa.gov/
[2] https://lore.kernel.org/selinux/20180530141104.28569-1-peter.enderborg@sony.com/

Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: delete repeated words in comments

Drop a repeated word in comments.
{open, is, then}

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
[PM: fix subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

selinux: permit removing security.selinux xattr before policy load

Currently SELinux denies attempts to remove the security.selinux xattr
always, even when permissive or no policy is loaded. This was originally
motivated by the view that all files should be labeled, even if that label
is unlabeled_t, and we shouldn't permit files that were once labeled to
have their labels removed entirely. This however prevents removing
SELinux xattrs in the case where one "disables" SELinux by not loading
a policy (e.g. a system where runtime disable is removed and selinux=0
was not specified). Allow removing the xattr before SELinux is
initialized. We could conceivably permit it even after initialization
if permissive, or introduce a separate permission check here.

Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: allow reading labels before policy is loaded

This patch does for `getxattr` what commit 3e3e24b42043 ("selinux: allow
labeling before policy is loaded") did for `setxattr`; it allows
querying the current SELinux label on disk before the policy is loaded.

One of the motivations described in that commit message also drives this
patch: for Fedora CoreOS (and eventually RHEL CoreOS), we want to be
able to move the root filesystem for example, from xfs to ext4 on RAID,
on first boot, at initrd time.[1]

Because such an operation works at the filesystem level, we need to be
able to read the SELinux labels first from the original root, and apply
them to the files of the new root. The previous commit enabled the
second part of this process; this commit enables the first part.

[1] https://github.com/coreos/fedora-coreos-tracker/issues/94

Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds

Today security_bprm_set_creds has several implementations:
apparmor_bprm_set_creds, cap_bprm_set_creds, selinux_bprm_set_creds,
smack_bprm_set_creds, and tomoyo_bprm_set_creds.

Except for cap_bprm_set_creds they all test bprm->called_set_creds and
return immediately if it is true. The function cap_bprm_set_creds
ignores bprm->calld_sed_creds entirely.

Create a new LSM hook security_bprm_creds_for_exec that is called just
before prepare_binprm in __do_execve_file, resulting in a LSM hook
that is called exactly once for the entire of exec. Modify the bits
of security_bprm_set_creds that only want to be called once per exec
into security_bprm_creds_for_exec, leaving only cap_bprm_set_creds
behind.

Remove bprm->called_set_creds all of it's former users have been moved
to security_bprm_creds_for_exec.

Add or upate comments a appropriate to bring them up to date and
to reflect this change.

Link: https://lkml.kernel.org/r/87v9kszrzh.fsf_-_@x220.int.ebiederm.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com> # For the LSM and Smack bits
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

selinux: Implement the watch_key security hook

Implement the watch_key security hook to make sure that a key grants the
caller View permission in order to set a watch on a key.

For the moment, the watch_devices security hook is left unimplemented as
it's not obvious what the object should be since the queue is global and
didn't previously exist.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>

keys: Make the KEY_NEED_* perms an enum rather than a mask

Since the meaning of combining the KEY_NEED_* constants is undefined, make
it so that you can't do that by turning them into an enum.

The enum is also given some extra values to represent special
circumstances, such as:

(1) The '0' value is reserved and causes a warning to trap the parameter
being unset.

(2) The key is to be unlinked and we require no permissions on it, only
the keyring, (this replaces the KEY_LOOKUP_FOR_UNLINK flag).

(3) An override due to CAP_SYS_ADMIN.

(4) An override due to an instantiation token being present.

(5) The permissions check is being deferred to later key_permission()
calls.

The extra values give the opportunity for LSMs to audit these situations.

[Note: This really needs overhauling so that lookup_user_key() tells
key_task_permission() and the LSM what operation is being done and leaves
it to those functions to decide how to map that onto the available
permits. However, I don't really want to make these change in the middle
of the notifications patchset.]

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: Paul Moore <paul@paul-moore.com>
cc: Stephen Smalley <stephen.smalley.work@gmail.com>
cc: Casey Schaufler <casey@schaufler-ca.com>
cc: keyrings@vger.kernel.org
cc: selinux@vger.kernel.org

selinux: properly handle multiple messages in selinux_netlink_send()

Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control. Prior to this patch, SELinux only inspected
the first message in the sk_buff.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Add xfs quota command types

Add Q_XQUOTAOFF, Q_XQUOTAON and Q_XSETQLIM to trigger filesystem quotamod
permission check.

Add Q_XGETQUOTA, Q_XGETQSTAT, Q_XGETQSTATV and Q_XGETNEXTQUOTA to trigger
filesystem quotaget permission check.

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>

security: selinux: allow per-file labeling for bpffs

Add support for genfscon per-file labeling of bpffs files. This allows
for separate permissions for different pinned bpf objects, which may
be completely unrelated to each other.

Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: Steven Moreland <smoreland@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: allow kernfs symlinks to inherit parent directory context

Currently symlinks on kernel filesystems, like sysfs, are labeled on
creation with the parent filesystem root sid.

Allow symlinks to inherit the parent directory context, so fine-grained
kernfs labeling can be applied to symlinks too and checking contexts
doesn't complain about them.

For backward-compatibility this behavior is contained in a new policy
capability: genfs_seclabel_symlinks

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Documentation,selinux: deprecate setting checkreqprot to 1

Deprecate setting the SELinux checkreqprot tunable to 1 via kernel
parameter or /sys/fs/selinux/checkreqprot. Setting it to 0 is left
intact for compatibility since Android and some Linux distributions
do so for security and treat an inability to set it as a fatal error.
Eventually setting it to 0 will become a no-op and the kernel will
stop using checkreqprot's value internally altogether.

checkreqprot was originally introduced as a compatibility mechanism
for legacy userspace and the READ_IMPLIES_EXEC personality flag.
However, if set to 1, it weakens security by allowing mappings to be
made executable without authorization by policy. The default value
for the SECURITY_SELINUX_CHECKREQPROT_VALUE config option was changed
from 1 to 0 in commit 2a35d196c160e3 ("selinux: change
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default") and both Android
and Linux distributions began explicitly setting
/sys/fs/selinux/checkreqprot to 0 some time ago.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: move status variables out of selinux_ss

It fits more naturally in selinux_state, since it reflects also global
state (the enforcing and policyload fields).

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

fs_parse: fold fs_parameter_desc/fs_parameter_spec

The former contains nothing but a pointer to an array of the latter...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs_parser: remove fs_parameter_description name field

Unused now.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: fix typo in filesystem name

Correct the filesystem name to "binder" to enable genfscon per-file
labelling for binderfs.

Fixes: 7a4b5194747 ("selinux: allow per-file labelling for binderfs")
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: slight style changes to the subj/description]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix regression introduced by move_mount(2) syscall

commit 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
introduced a new move_mount(2) system call and a corresponding new LSM
security_move_mount hook but did not implement this hook for any existing
LSM. This creates a regression for SELinux with respect to consistent
checking of mounts; the existing selinux_mount hook checks mounton
permission to the mount point path. Provide a SELinux hook
implementation for move_mount that applies this same check for
consistency. In the future we may wish to add a new move_mount
filesystem permission and check as well, but this addresses
the immediate regression.

Fixes: 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove redundant allocation and helper functions

This patch removes the inode, file, and superblock security blob
allocation functions and moves the associated code into the
respective LSM hooks. This patch also removes the inode_doinit()
function as it was a trivial wrapper around
inode_doinit_with_dentry() and called from one location in the code.

Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove redundant selinux_nlmsg_perm

selinux_nlmsg_perm is used for only by selinux_netlink_send. Remove
the redundant function to simplify the code.

Fix a typo by suggestion from Stephen.

Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: reorder hooks to make runtime disable less broken

Commit b1d9e6b0646d ("LSM: Switch to lists of hooks") switched the LSM
infrastructure to use per-hook lists, which meant that removing the
hooks for a given module was no longer atomic. Even though the commit
clearly documents that modules implementing runtime revmoval of hooks
(only SELinux attempts this madness) need to take special precautions to
avoid race conditions, SELinux has never addressed this.

By inserting an artificial delay between the loop iterations of
security_delete_hooks() (I used 100 ms), booting to a state where
SELinux is enabled, but policy is not yet loaded, and running these
commands:

while true; do ping -c 1 <some IP>; done &
echo -n 1 >/sys/fs/selinux/disable
kill %1
wait

...I was able to trigger NULL pointer dereferences in various places. I
also have a report of someone getting panics on a stock RHEL-8 kernel
after setting SELINUX=disabled in /etc/selinux/config and rebooting
(without adding "selinux=0" to kernel command-line).

Reordering the SELinux hooks such that those that allocate structures
are removed last seems to prevent these panics. It is very much possible
that this doesn't make the runtime disable completely race-free, but at
least it makes the operation much less fragile.

Cc: stable@vger.kernel.org
Fixes: b1d9e6b0646d ("LSM: Switch to lists of hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: treat atomic flags more carefully

The disabled/enforcing/initialized flags are all accessed concurrently
by threads so use the appropriate accessors that ensure atomicity and
document that it is expected.

Use smp_load/acquire...() helpers (with memory barriers) for the
initialized flag, since it gates access to the rest of the state
structures.

Note that the disabled flag is currently not used for anything other
than avoiding double disable, but it will be used for bailing out of
hooks once security_delete_hooks() is removed.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: make default_noexec read-only after init

SELinux checks whether VM_EXEC is set in the VM_DATA_DEFAULT_FLAGS
during initialization and saves the result in default_noexec for use
in its mmap and mprotect hook function implementations to decide
whether to apply EXECMEM, EXECHEAP, EXECSTACK, and EXECMOD checks.
Mark default_noexec as ro_after_init to prevent later clearing it
and thereby disabling these checks. It is only set legitimately from
init code.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove redundant msg_msg_alloc_security

selinux_msg_msg_alloc_security only calls msg_msg_alloc_security but
do nothing else. And also msg_msg_alloc_security is just used by the
former.

Remove the redundant function to simplify the code.

Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: allow per-file labelling for binderfs

This patch allows genfscon per-file labeling for binderfs.
This is required to have separate permissions to allow
access to binder, hwbinder and vndbinder devices which are
relocating to binderfs.

Acked-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: clean up selinux_enabled/disabled/enforcing_boot

Rename selinux_enabled to selinux_enabled_boot to make it clear that
it only reflects whether SELinux was enabled at boot. Replace the
references to it in the MAC_STATUS audit log in sel_write_enforce()
with hardcoded "1" values because this code is only reachable if SELinux
is enabled and does not change its value, and update the corresponding
MAC_STATUS audit log in sel_write_disable(). Stop clearing
selinux_enabled in selinux_disable() since it is not used outside of
initialization code that runs before selinux_disable() can be reached.
Mark both selinux_enabled_boot and selinux_enforcing_boot as __initdata
since they are only used in initialization code.

Wrap the disabled field in the struct selinux_state with
CONFIG_SECURITY_SELINUX_DISABLE since it is only used for
runtime disable.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: remove unnecessary selinux cred request

task_security_struct was obtained at the beginning of may_create
and selinux_inode_init_security, no need to obtain again.
may_create will be called very frequently when create dir and file.

Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: clean up selinux_inode_permission MAY_NOT_BLOCK tests

Through a somewhat convoluted series of changes, we have ended up
with multiple unnecessary occurrences of (flags & MAY_NOT_BLOCK)
tests in selinux_inode_permission(). Clean it up and simplify.
No functional change.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fall back to ref-walk if audit is required

commit bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
passed down the rcu flag to the SELinux AVC, but failed to adjust the
test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY.
Previously, we only returned -ECHILD if generating an audit record with
LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission.
Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined
equivalent in selinux_inode_permission() immediately after we determine
that audit is required, and always fall back to ref-walk in this case.

Fixes: bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
Reported-by: Will Deacon <will@kernel.org>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: revert "stop passing MAY_NOT_BLOCK to the AVC upon follow_link"

This reverts commit e46e01eebbbc ("selinux: stop passing MAY_NOT_BLOCK
to the AVC upon follow_link"). The correct fix is to instead fall
back to ref-walk if audit is required irrespective of the specific
audit data type. This is done in the next commit.

Fixes: e46e01eebbbc ("selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

security,lockdown,selinux: implement SELinux lockdown

Implement a SELinux hook for lockdown. If the lockdown module is also
enabled, then a denial by the lockdown module will take precedence over
SELinux, so SELinux can only further restrict lockdown decisions.
The SELinux hook only distinguishes at the granularity of integrity
versus confidentiality similar to the lockdown module, but includes the
full lockdown reason as part of the audit record as a hint in diagnosing
what triggered the denial. To support this auditing, move the
lockdown_reasons[] string array from being private to the lockdown
module to the security framework so that it can be used by the lsm audit
code and so that it is always available even when the lockdown module
is disabled.

Note that the SELinux implementation allows the integrity and
confidentiality reasons to be controlled independently from one another.
Thus, in an SELinux policy, one could allow operations that specify
an integrity reason while blocking operations that specify a
confidentiality reason. The SELinux hook implementation is
stricter than the lockdown module in validating the provided reason value.

Sample AVC audit output from denials:
avc: denied { integrity } for pid=3402 comm="fwupd"
lockdown_reason="/dev/mem,kmem,port" scontext=system_u:system_r:fwupd_t:s0
tcontext=system_u:system_r:fwupd_t:s0 tclass=lockdown permissive=0

avc: denied { confidentiality } for pid=4628 comm="cp"
lockdown_reason="/proc/kcore access"
scontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023
tcontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023
tclass=lockdown permissive=0

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
[PM: some merge fuzz do the the perf hooks]
Signed-off-by: Paul Moore <paul@paul-moore.com>

net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port)

Note that the sysctl write accessor functions guarantee that:
net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.

ie. even though
if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
if (snum < low || snum > high) {
which is equivalent to:
if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.

But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).

Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

y2038: move itimer reset into itimer.c

Preparing for a change to the itimer internals, stop using the
do_setitimer() symbol and instead use a new higher-level interface.

The do_getitimer()/do_setitimer functions can now be made static,
allowing the compiler to potentially produce better object code.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

perf_event: Add support for LSM and SELinux checks

In current mainline, the degree of access to perf_event_open(2) system
call depends on the perf_event_paranoid sysctl. This has a number of
limitations:

1. The sysctl is only a single value. Many types of accesses are controlled
based on the single value thus making the control very limited and
coarse grained.
2. The sysctl is global, so if the sysctl is changed, then that means
all processes get access to perf_event_open(2) opening the door to
security issues.

This patch adds LSM and SELinux access checking which will be used in
Android to access perf_event_open(2) for the purposes of attaching BPF
programs to tracepoints, perf profiling and other operations from
userspace. These operations are intended for production systems.

5 new LSM hooks are added:
1. perf_event_open: This controls access during the perf_event_open(2)
syscall itself. The hook is called from all the places that the
perf_event_paranoid sysctl is checked to keep it consistent with the
systctl. The hook gets passed a 'type' argument which controls CPU,
kernel and tracepoint accesses (in this context, CPU, kernel and
tracepoint have the same semantics as the perf_event_paranoid sysctl).
Additionally, I added an 'open' type which is similar to
perf_event_paranoid sysctl == 3 patch carried in Android and several other
distros but was rejected in mainline [1] in 2016.

2. perf_event_alloc: This allocates a new security object for the event
which stores the current SID within the event. It will be useful when
the perf event's FD is passed through IPC to another process which may
try to read the FD. Appropriate security checks will limit access.

3. perf_event_free: Called when the event is closed.

4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event.

5. perf_event_write: Called from the ioctl(2) syscalls for the event.

[1] https://lwn.net/Articles/696240/

Since Peter had suggest LSM hooks in 2016 [1], I am adding his
Suggested-by tag below.

To use this patch, we set the perf_event_paranoid sysctl to -1 and then
apply selinux checking as appropriate (default deny everything, and then
add policy rules to give access to domains that need it). In the future
we can remove the perf_event_paranoid sysctl altogether.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: rostedt@goodmis.org
Cc: Yonghong Song <yhs@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: jeffv@google.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: primiano@google.com
Cc: Song Liu <songliubraving@fb.com>
Cc: rsavitski@google.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Matthew Garrett <matthewgarrett@google.com>
Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org

selinux: allow labeling before policy is loaded

Currently, the SELinux LSM prevents one from setting the
`security.selinux` xattr on an inode without a policy first being
loaded. However, this restriction is problematic: it makes it impossible
to have newly created files with the correct label before actually
loading the policy.

This is relevant in distributions like Fedora, where the policy is
loaded by systemd shortly after pivoting out of the initrd. In such
instances, all files created prior to pivoting will be unlabeled. One
then has to relabel them after pivoting, an operation which inherently
races with other processes trying to access those same files.

Going further, there are use cases for creating the entire root
filesystem on first boot from the initrd (e.g. Container Linux supports
this today[1], and we'd like to support it in Fedora CoreOS as well[2]).
One can imagine doing this in two ways: at the block device level (e.g.
laying down a disk image), or at the filesystem level. In the former,
labeling can simply be part of the image. But even in the latter
scenario, one still really wants to be able to set the right labels when
populating the new filesystem.

This patch enables this by changing behaviour in the following two ways:
1. allow `setxattr` if we're not initialized
2. don't try to set the in-core inode SID if we're not initialized;
instead leave it as `LABEL_INVALID` so that revalidation may be
attempted at a later time

Note the first hunk of this patch is mostly the same as a previously
discussed one[3], though it was part of a larger series which wasn't
accepted.

[1] https://coreos.com/os/docs/latest/root-filesystem-placement.html
[2] https://github.com/coreos/fedora-coreos-tracker/issues/94
[3] https://www.spinics.net/lists/linux-initramfs/msg04593.html

Co-developed-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix residual uses of current_security() for the SELinux blob

We need to use selinux_cred() to fetch the SELinux cred blob instead
of directly using current->security or current_security(). There
were a couple of lingering uses of current_security() in the SELinux code
that were apparently missed during the earlier conversions. IIUC, this
would only manifest as a bug if multiple security modules including
SELinux are enabled and SELinux is not first in the lsm order. After
this change, there appear to be no other users of current_security()
in-tree; perhaps we should remove it altogether.

Fixes: bbd3662a8348 ("Infrastructure management of the cred security blob")
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

fanotify, inotify, dnotify, security: add security hook for fs notifications

As of now, setting watches on filesystem objects has, at most, applied a
check for read access to the inode, and in the case of fanotify, requires
CAP_SYS_ADMIN. No specific security hook or permission check has been
provided to control the setting of watches. Using any of inotify, dnotify,
or fanotify, it is possible to observe, not only write-like operations, but
even read access to a file. Modeling the watch as being merely a read from
the file is insufficient for the needs of SELinux. This is due to the fact
that read access should not necessarily imply access to information about
when another process reads from a file. Furthermore, fanotify watches grant
more power to an application in the form of permission events. While
notification events are solely, unidirectional (i.e. they only pass
information to the receiving application), permission events are blocking.
Permission events make a request to the receiving application which will
then reply with a decision as to whether or not that action may be
completed. This causes the issue of the watching application having the
ability to exercise control over the triggering process. Without drawing a
distinction within the permission check, the ability to read would imply
the greater ability to control an application. Additionally, mount and
superblock watches apply to all files within the same mount or superblock.
Read access to one file should not necessarily imply the ability to watch
all files accessed within a given mount or superblock.

In order to solve these issues, a new LSM hook is implemented and has been
placed within the system calls for marking filesystem objects with inotify,
fanotify, and dnotify watches. These calls to the hook are placed at the
point at which the target path has been resolved and are provided with the
path struct, the mask of requested notification events, and the type of
object on which the mark is being set (inode, superblock, or mount). The
mask and obj_type have already been translated into common FS_* values
shared by the entirety of the fs notification infrastructure. The path
struct is passed rather than just the inode so that the mount is available,
particularly for mount watches. This also allows for use of the hook by
pathname-based security modules. However, since the hook is intended for
use even by inode based security modules, it is not placed under the
CONFIG_SECURITY_PATH conditional. Otherwise, the inode-based security
modules would need to enable all of the path hooks, even though they do not
use any of them.

This only provides a hook at the point of setting a watch, and presumes
that permission to set a particular watch implies the ability to receive
all notification about that object which match the mask. This is all that
is required for SELinux. If other security modules require additional hooks
or infrastructure to control delivery of notification, these can be added
by them. It does not make sense for us to propose hooks for which we have
no implementation. The understanding that all notifications received by the
requesting application are all strictly of a type for which the application
has been granted permission shows that this implementation is sufficient in
its coverage.

Security modules wishing to provide complete control over fanotify must
also implement a security_file_open hook that validates that the access
requested by the watching application is authorized. Fanotify has the issue
that it returns a file descriptor with the file mode specified during
fanotify_init() to the watching process on event. This is already covered
by the LSM security_file_open hook if the security module implements
checking of the requested file mode there. Otherwise, a watching process
can obtain escalated access to a file for which it has not been authorized.

The selinux_path_notify hook implementation works by adding five new file
permissions: watch, watch_mount, watch_sb, watch_reads, and watch_with_perm
(descriptions about which will follow), and one new filesystem permission:
watch (which is applied to superblock checks). The hook then decides which
subset of these permissions must be held by the requesting application
based on the contents of the provided mask and the obj_type. The
selinux_file_open hook already checks the requested file mode and therefore
ensures that a watching process cannot escalate its access through
fanotify.

The watch, watch_mount, and watch_sb permissions are the baseline
permissions for setting a watch on an object and each are a requirement for
any watch to be set on a file, mount, or superblock respectively. It should
be noted that having either of the other two permissions (watch_reads and
watch_with_perm) does not imply the watch, watch_mount, or watch_sb
permission. Superblock watches further require the filesystem watch
permission to the superblock. As there is no labeled object in view for
mounts, there is no specific check for mount watches beyond watch_mount to
the inode. Such a check could be added in the future, if a suitable labeled
object existed representing the mount.

The watch_reads permission is required to receive notifications from
read-exclusive events on filesystem objects. These events include accessing
a file for the purpose of reading and closing a file which has been opened
read-only. This distinction has been drawn in order to provide a direct
indication in the policy for this otherwise not obvious capability. Read
access to a file should not necessarily imply the ability to observe read
events on a file.

Finally, watch_with_perm only applies to fanotify masks since it is the
only way to set a mask which allows for the blocking, permission event.
This permission is needed for any watch which is of this type. Though
fanotify requires CAP_SYS_ADMIN, this is insufficient as it gives implicit
trust to root, which we do not do, and does not support least privilege.

Signed-off-by: Aaron Goidel <acgoide@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Revert "Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs"

This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus
effectively commits

7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION")
2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL")

that the merge brought in).

It turns out that it breaks booting with an encrypted volume, and Eric
biggers reports that it also breaks the fscrypt tests [1] and loading of
in-kernel X.509 certificates [2].

The root cause of all the breakage is likely the same, but David Howells
is off email so rather than try to work it out it's getting reverted in
order to not impact the rest of the merge window.

[1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/
[2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/

Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

keys: Replace uid/gid/perm permissions checking with an ACL

Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.

============
WHY DO THIS?
============

The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.

For SETATTR, this includes actions that are about controlling access to a
key:

(1) Changing a key's ownership.

(2) Changing a key's security information.

(3) Setting a keyring's restriction.

And actions that are about managing a key's lifetime:

(4) Setting an expiry time.

(5) Revoking a key.

and (proposed) managing a key as part of a cache:

(6) Invalidating a key.

Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.

Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.

As for SEARCH permission, that currently covers:

(1) Finding keys in a keyring tree during a search.

(2) Permitting keyrings to be joined.

(3) Invalidation.

But these don't really belong together either, since these actions really
need to be controlled separately.

Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.


===============
WHAT IS CHANGED
===============

The SETATTR permission is split to create two new permissions:

(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.

(2) REVOKE - which allows a key to be revoked.

The SEARCH permission is split to create:

(1) SEARCH - which allows a keyring to be search and a key to be found.

(2) JOIN - which allows a keyring to be joined as a session keyring.

(3) INVAL - which allows a key to be invalidated.

The WRITE permission is also split to create:

(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.

(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.

(3) REVOKE - see above.


Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:

(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone

Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.

Further subjects may be made available by later patches.

The ACE also specifies a permissions mask. The set of permissions is now:

VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring


The KEYCTL_SETPERM function is then deprecated.

The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.

The KEYCTL_INVALIDATE function then requires INVAL.

The KEYCTL_REVOKE function then requires REVOKE.

The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.

The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.


======================
BACKWARD COMPATIBILITY
======================

To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.

It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.

SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.

The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.

It will make the following mappings:

(1) INVAL, JOIN -> SEARCH

(2) SET_SECURITY -> SETATTR

(3) REVOKE -> WRITE if SETATTR isn't already set

(4) CLEAR -> WRITE

Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.


=======
TESTING
=======

This passes the keyutils testsuite for all but a couple of tests:

(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.

(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.

Signed-off-by: David Howells <dhowells@redhat.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LSM: switch to blocking policy update notifiers

Atomic policy updaters are not very useful as they cannot
usually perform the policy updates on their own. Since it
seems that there is no strict need for the atomicity,
switch to the blocking variant. While doing so, rename
the functions accordingly.

Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

selinux: fix empty write to keycreate file

When sid == 0 (we are resetting keycreate_sid to the default value), we
should skip the KEY__CREATE check.

Before this patch, doing a zero-sized write to /proc/self/keycreate
would check if the current task can create unlabeled keys (which would
usually fail with -EACCESS and generate an AVC). Now it skips the check
and correctly sets the task's keycreate_sid to 0.

Bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1719067

Tested using the reproducer from the report above.

Fixes: 4eb582cf1fbd ("[PATCH] keys: add a way to store the appropriate context for newly-created keys")
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts()

In selinux_sb_eat_lsm_opts(), 'arg' is allocated by kmemdup_nul(). It
returns NULL when fails. So 'arg' should be checked. And 'mnt_opts'
should be freed when error.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Fixes: 99dbbb593fe6 ("selinux: rewrite selinux_sb_eat_lsm_opts()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix a missing-check bug in selinux_add_mnt_opt( )

In selinux_add_mnt_opt(), 'val' is allocated by kmemdup_nul(). It returns
NULL when fails. So 'val' should be checked. And 'mnt_opts' should be
freed when error.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Fixes: 757cbe597fe8 ("LSM: new method: ->sb_add_mnt_opt()")
Cc: <stable@vger.kernel.org>
[PM: fixed some indenting problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: do not report error on connect(AF_UNSPEC)

calling connect(AF_UNSPEC) on an already connected TCP socket is an
established way to disconnect() such socket. After commit 68741a8adab9
("selinux: Fix ltp test connect-syscall failure") it no longer works
and, in the above scenario connect() fails with EAFNOSUPPORT.

Fix the above explicitly early checking for AF_UNSPEC family, and
returning success in that case.

Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Revert "selinux: do not report error on connect(AF_UNSPEC)"

This reverts commit c7e0d6cca86581092cbbf2cd868b3601495554cf.

It was agreed a slightly different fix via the selinux tree.

v1 -> v2:
- use the correct reverted commit hash

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selinux: do not report error on connect(AF_UNSPEC)

calling connect(AF_UNSPEC) on an already connected TCP socket is an
established way to disconnect() such socket. After commit 68741a8adab9
("selinux: Fix ltp test connect-syscall failure") it no longer works
and, in the above scenario connect() fails with EAFNOSUPPORT.

Fix the above falling back to the generic/old code when the address family
is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has
specific constraints.

Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selinux: Check address length before reading address family

KMSAN will complain if valid address length passed to bind()/connect() is
shorter than sizeof("struct sockaddr"->sa_family) bytes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Paul Moore <paul@paul-moore.com>

kernfs: fix xattr name handling in LSM helpers

The implementation of kernfs_security_xattr_*() helpers reuses the
kernfs_node_xattr_*() functions, which take the suffix of the xattr name
and extract full xattr name from it using xattr_full_name(). However,
this function relies on the fact that the suffix passed to xattr
handlers from VFS is always constructed from the full name by just
incerementing the pointer. This doesn't necessarily hold for the callers
of kernfs_security_xattr_*(), so their usage will easily lead to
out-of-bounds access.

Fix this by moving the xattr name reconstruction to the VFS xattr
handlers and replacing the kernfs_security_xattr_*() helpers with more
general kernfs_xattr_*() helpers that take full xattr name and allow
accessing all kernfs node's xattrs.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: b230d5aba2d1 ("LSM: add new hook for kernfs node initialization")
Fixes: ec882da5cda9 ("selinux: implement the kernfs_init_security hook")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: Make selinux_kernfs_init_security static

Fix sparse warning:

security/selinux/hooks.c:3389:5: warning:
symbol 'selinux_kernfs_init_security' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: implement the kernfs_init_security hook

The hook applies the same logic as selinux_determine_inode_label(), with
the exception of the super_block handling, which will be enforced on the
actual inodes later by other hooks.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: minor merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: try security xattr after genfs for kernfs filesystems

Since kernfs supports the security xattr handlers, we can simply use
these to determine the inode's context, dropping the need to update it
from kernfs explicitly using a security_inode_notifysecctx() call.

We achieve this by setting a new sbsec flag SE_SBGENFS_XATTR to all
mounts that are known to use kernfs under the hood and then fetching the
xattrs after determining the fallback genfs sid in
inode_doinit_with_dentry() when this flag is set.

This will allow implementing full security xattr support in kernfs and
removing the ...notifysecctx() call in a subsequent patch.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: more manual merge fixups]
Signed-off-by: Paul Moore <paul@paul-moore.com>

security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock

In the case when we're reusing a superblock, selinux_sb_clone_mnt_opts()
fails to set set_kern_flags, with the result that
nfs_clone_sb_security() incorrectly clears NFS_CAP_SECURITY_LABEL.

The result is that if you mount the same NFS filesystem twice, NFS
security labels are turned off, even if they would work fine if you
mounted the filesystem only once.

("fixes" may be not exactly the right tag, it may be more like
"fixed-other-cases-but-missed-this-one".)

Cc: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 0b4d3452b8b4 "security/selinux: allow security_sb_clone_mnt_opts..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: add the missing walk_size + len check in selinux_sctp_bind_connect

As does in __sctp_connect(), when checking addrs in a while loop, after
get the addr len according to sa_family, it's necessary to do the check
walk_size + af->sockaddr_len > addrs_size to make sure it won't access
an out-of-bounds addr.

The same thing is needed in selinux_sctp_bind_connect(), otherwise an
out-of-bounds issue can be triggered:

[14548.772313] BUG: KASAN: slab-out-of-bounds in selinux_sctp_bind_connect+0x1aa/0x1f0
[14548.927083] Call Trace:
[14548.938072] dump_stack+0x9a/0xe9
[14548.953015] print_address_description+0x65/0x22e
[14548.996524] kasan_report.cold.6+0x92/0x1a6
[14549.015335] selinux_sctp_bind_connect+0x1aa/0x1f0
[14549.036947] security_sctp_bind_connect+0x58/0x90
[14549.058142] __sctp_setsockopt_connectx+0x5a/0x150 [sctp]
[14549.081650] sctp_setsockopt.part.24+0x1322/0x3ce0 [sctp]

Cc: stable@vger.kernel.org
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

introduce cloning of fs_context

new primitive: vfs_dup_fs_context(). Comes with fs_context
method (->dup()) for copying the filesystem-specific parts
of fs_context, along with LSM one (->fs_context_dup()) for
doing the same to LSM parts.

[needs better commit message, and change of Author:, anyway]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: Implement the new mount API LSM hooks

Implement the new mount API LSM hooks for SELinux. At some point the old
hooks will need to be removed.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paul Moore <paul@paul-moore.com>
cc: Stephen Smalley <sds@tycho.nsa.gov>
cc: selinux@tycho.nsa.gov
cc: linux-security-module@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

doc: sctp: Merge and clean up rst files

The SCTP sections were ending up at the top-level table of contents
under the security section when they should have be sections with the
SCTP chapters. In addition to correcting the section and subsection
headings, this merges the SCTP documents into a single file to organize
the chapters more clearly, internally linkifies them, and adds the
missing SPDX header.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

LSM: Make lsm_early_cred() and lsm_early_task() local functions.

Since current->cred == current->real_cred when ordered_lsm_init()
is called, and lsm_early_cred()/lsm_early_task() need to be called
between the amount of required bytes is determined and module specific
initialization function is called, we can move these calls from
individual modules to ordered_lsm_init().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

selinux: do not override context on context mounts

Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().

This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.

Steps to reproduce:
# mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
# chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.threads
# umount /sys/fs/cgroup/unified
# mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified

Result before:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads

Result after:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: never allow relabeling on context mounts

In the SECURITY_FS_USE_MNTPOINT case we never want to allow relabeling
files/directories, so we should never set the SBLABEL_MNT flag. The
'special handling' in selinux_is_sblabel_mnt() is only intended for when
the behavior is set to SECURITY_FS_USE_GENFS.

While there, make the logic in selinux_is_sblabel_mnt() more explicit
and add a BUILD_BUG_ON() to make sure that introducing a new
SECURITY_FS_USE_* forces a review of the logic.

Fixes: d5f3a5f6e7e7 ("selinux: add security in-core xattr support for pstore and debugfs")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link

commit bda0be7ad9948 ("security: make inode_follow_link RCU-walk aware")
switched selinux_inode_follow_link() to use avc_has_perm_flags() and
pass down the MAY_NOT_BLOCK flag if called during RCU walk. However,
the only test of MAY_NOT_BLOCK occurs during slow_avc_audit()
and only if passing an inode as audit data (LSM_AUDIT_DATA_INODE). Since
selinux_inode_follow_link() passes a dentry directly, passing MAY_NOT_BLOCK
here serves no purpose. Switch selinux_inode_follow_link() to use
avc_has_perm() and drop avc_has_perm_flags() since there are no other
users.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: avoid silent denials in permissive mode under RCU walk

commit 0dc1ba24f7fff6 ("SELINUX: Make selinux cache VFS RCU walks safe")
results in no audit messages at all if in permissive mode because the
cache is updated during the rcu walk and thus no denial occurs on
the subsequent ref walk. Fix this by not updating the cache when
performing a non-blocking permission check. This only affects search
and symlink read checks during rcu walk.

Fixes: 0dc1ba24f7fff6 ("SELINUX: Make selinux cache VFS RCU walks safe")
Reported-by: BMK <bmktuwien@gmail.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: generalize flag passing to security_capable

This patch provides a general mechanism for passing flags to the
security_capable LSM hook. It replaces the specific 'audit' flag that is
used to tell security_capable whether it should log an audit message for
the given capability check. The reason for generalizing this flag
passing is so we can add an additional flag that signifies whether
security_capable is being called by a setid syscall (which is needed by
the proposed SafeSetID LSM).

Signed-off-by: Micah Morton <mortonm@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>

LSM: Infrastructure management of the ipc security blob

Move management of the kern_ipc_perm->security and
msg_msg->security blobs out of the individual security
modules and into the security infrastructure. Instead
of allocating the blobs from within the modules the modules
tell the infrastructure how much space is required, and
the space is allocated there.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>

SELinux: Abstract use of ipc security blobs

Don't use the ipc->security pointer directly.
Don't use the msg_msg->security pointer directly.
Provide helper functions that provides the security blob pointers.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

LSM: Infrastructure management of the inode security

Move management of the inode->i_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>

SELinux: Abstract use of inode security blob

Don't use the inode->i_security pointer directly.
Provide a helper function that provides the security blob pointer.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

LSM: Infrastructure management of the file security

Move management of the file->f_security blob out of the
individual security modules and into the infrastructure.
The modules no longer allocate or free the data, instead
they tell the infrastructure how much space they require.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>

SELinux: Abstract use of file security blob

Don't use the file->f_security pointer directly.
Provide a helper function that provides the security blob pointer.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

Infrastructure management of the cred security blob

Move management of the cred security blob out of the
security modules and into the security infrastructre.
Instead of allocating and freeing space the security
modules tell the infrastructure how much space they
require.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>

SELinux: Remove unused selinux_is_enabled

There are no longer users of selinux_is_enabled().
Remove it. As selinux_is_enabled() is the only reason
for include/linux/selinux.h remove that as well.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

SELinux: Remove cred security blob poisoning

The SELinux specific credential poisioning only makes sense
if SELinux is managing the credentials. As the intent of this
patch set is to move the blob management out of the modules
and into the infrastructure, the SELinux specific code has
to go. The poisioning could be introduced into the infrastructure
at some later date.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

SELinux: Abstract use of cred security blob

Don't use the cred->security pointer directly.
Provide a helper function that provides the security blob pointer.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>

selinux: Remove SECURITY_SELINUX_BOOTPARAM_VALUE

In preparation for removing CONFIG_DEFAULT_SECURITY, this removes the
soon-to-be redundant SECURITY_SELINUX_BOOTPARAM_VALUE. Since explicit
ordering via CONFIG_LSM or "lsm=" will define whether an LSM is enabled or
not, this CONFIG will become effectively ignored, so remove it. However,
in order to stay backward-compatible with "security=selinux", the enable
variable defaults to true.

Signed-off-by: Kees Cook <keescook@chromium.org>

LSM: Separate idea of "major" LSM from "exclusive" LSM

In order to both support old "security=" Legacy Major LSM selection, and
handling real exclusivity, this creates LSM_FLAG_EXCLUSIVE and updates
the selection logic to handle them.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>

LSM: Lift LSM selection out of individual LSMs

As a prerequisite to adjusting LSM selection logic in the future, this
moves the selection logic up out of the individual major LSMs, making
their init functions only run when actually enabled. This considers all
LSMs enabled by default unless they specified an external "enable"
variable.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>

LSM: Plumb visibility into optional "enabled" state

In preparation for lifting the "is this LSM enabled?" logic out of the
individual LSMs, pass in any special enabled state tracking (as needed
for SELinux, AppArmor, and LoadPin). This should be an "int" to include
handling any future cases where "enabled" is exposed via sysctl which
has no "bool" type.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>

LSM: Introduce LSM_FLAG_LEGACY_MAJOR

This adds a flag for the current "major" LSMs to distinguish them when
we have a universal method for ordering all LSMs. It's called "legacy"
since the distinction of "major" will go away in the blob-sharing world.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>

LSM: new method: ->sb_add_mnt_opt()

Adding options to growing mnt_opts. NFS kludge with passing
context= down into non-text-options mount switched to it, and
with that the last use of ->sb_parse_opts_str() is gone.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: rewrite selinux_sb_eat_lsm_opts()

make it use selinux_add_opt() and avoid separate copies - gather
non-LSM options by memmove() in place

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: regularize Opt_... names a bit

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: switch away from match_token()

It's not a good fit, unfortunately, and the next step will make it
even less so. Open-code what we need here.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: new helper - selinux_add_opt()

the guts of the loop in selinux_parse_opts_str() - takes one
(already recognized) option and adds it to growing selinux_mnt_opts.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: switch to private struct selinux_mnt_opts

none of the convolutions needed, just 4 strings, TYVM...

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

LSM: hide struct security_mnt_opts from any generic code

Keep void * instead, allocate on demand (in parse_str_opts, at the
moment). Eventually both selinux and smack will be better off
with private structures with several strings in those, rather than
this "counter and two pointers to dynamically allocated arrays"
ugliness. This commit allows to do that at leisure, without
disrupting anything outside of given module.

Changes:
* instead of struct security_mnt_opt use an opaque pointer
initialized to NULL.
* security_sb_eat_lsm_opts(), security_sb_parse_opts_str() and
security_free_mnt_opts() take it as var argument (i.e. as void **);
call sites are unchanged.
* security_sb_set_mnt_opts() and security_sb_remount() take
it by value (i.e. as void *).
* new method: ->sb_free_mnt_opts(). Takes void *, does
whatever freeing that needs to be done.
* ->sb_set_mnt_opts() and ->sb_remount() might get NULL as
mnt_opts argument, meaning "empty".

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: kill selinux_sb_get_mnt_opts()

it's much easier to just do the right thing in ->sb_show_options(),
without bothering with allocating and populating arrays, etc.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

LSM: turn sb_eat_lsm_opts() into a method

Kill ->sb_copy_data() - it's used only in combination with immediately
following ->sb_parse_opts_str(). Turn that combination into a new
method.

This is just a mechanical move - cleanups will be the next step.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux; don't open-code a loop in sb_finish_set_opts()

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()

... leaving the "is it kernel-internal" logics in the caller.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

LSM: lift extracting and parsing LSM options into the caller of ->sb_remount()

This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

LSM: lift parsing LSM options into the caller of ->sb_kern_mount()

This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: expand superblock_doinit() calls

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>

vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled

Only the mount namespace code that implements mount(2) should be using the
MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is
included.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>

selinux: always allow mounting submounts

If a superblock has the MS_SUBMOUNT flag set, we should always allow
mounting it. These mounts are done automatically by the kernel either as
part of mounting some parent mount (e.g. debugfs always mounts tracefs
under "tracing" for compatibility) or they are mounted automatically as
needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such
automounts are either an implicit consequence of the parent mount (which
is already checked) or they can happen during regular accesses (where it
doesn't make sense to check against the current task's context), the
mount permission check should be skipped for them.

Without this patch, attempts to access contents of an automounted
directory can cause unexpected SELinux denials.

In the current kernel tree, the MS_SUBMOUNT flag is set only via
vfs_submount(), which is called only from the following places:
- AFS, when automounting special "symlinks" referencing other cells
- CIFS, when automounting "referrals"
- NFS, when automounting subtrees
- debugfs, when automounting tracefs

In all cases the submounts are meant to be transparent to the user and
it makes sense that if mounting the master is allowed, then so should be
the automounts. Note that CAP_SYS_ADMIN capability checking is already
skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in:
- sget_userns() in fs/super.c:
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) &&
!(type->fs_flags & FS_USERNS_MOUNT) &&
!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
- sget() in fs/super.c:
/* Ensure the requestor has permissions over the target filesystem */
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);

Verified internally on patched RHEL 7.6 with a reproducer using
NFS+httpd and selinux-tesuite.

Fixes: 93faccbbfa95 ("fs: Better permission checking for submounts")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: check length properly in SCTP bind hook

selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.

The length of the whole address ('len') is already checked in the
callees.

Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>

LSM: Record LSM name in struct lsm_info

In preparation for making LSM selections outside of the LSMs, include
the name of LSMs in struct lsm_info.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

LSM: Convert security_initcall() into DEFINE_LSM()

Instead of using argument-based initializers, switch to defining the
contents of struct lsm_info on a per-LSM basis. This also drops
the final use of the now inaccurate "initcall" naming.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

signal: Distinguish between kernel_siginfo and siginfo

Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.

The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.

So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.

The definition of struct kernel_siginfo I have put in include/signal_types.h

A set of buildtime checks has been added to verify the two structures have
the same field offsets.

To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

selinux: fix mounting of cgroup2 under older policies

commit 901ef845fa2469c ("selinux: allow per-file labeling for cgroupfs")
broke mounting of cgroup2 under older SELinux policies which lacked
a genfscon rule for cgroup2. This prevents mounting of cgroup2 even
when SELinux is permissive.

Change the handling when there is no genfscon rule in policy to
just mark the inode unlabeled and not return an error to the caller.
This permits mounting and access if allowed by policy, e.g. to
unconfined domains.

I also considered changing the behavior of security_genfs_sid() to
never return -ENOENT, but the current behavior is relied upon by
other callers to perform caller-specific handling.

Fixes: 901ef845fa2469c ("selinux: allow per-file labeling for cgroupfs")
CC: <stable@vger.kernel.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

module: replace the existing LSM hook in init_module

Both the init_module and finit_module syscalls call either directly
or indirectly the security_kernel_read_file LSM hook. This patch
replaces the direct call in init_module with a call to the new
security_kernel_load_data hook and makes the corresponding changes
in SELinux, LoadPin, and IMA.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>

->file_open(): lose cred argument

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: Cleanup printk logging in hooks

Replace printk with pr_* to avoid checkpatch warnings.

Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

docs: Fix some broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>

audit: use inline function to get audit context

Recognizing that the audit context is an internal audit value, use an
access function to retrieve the audit context pointer for the task
rather than reaching directly into the task struct to get it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: correctly handle sa_family cases in selinux_sctp_bind_connect()

Allow to pass the socket address structure with AF_UNSPEC family for
compatibility purposes. selinux_socket_bind() will further check it
for INADDR_ANY and selinux_socket_connect_helper() should return
EINVAL.

For a bad address family return EINVAL instead of AFNOSUPPORT error,
i.e. what is expected from SCTP protocol in such case.

Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: fix address family in bind() and connect() to match address/port

Since sctp_bindx() and sctp_connectx() can have multiple addresses,
sk_family can differ from sa_family. Therefore, selinux_socket_bind()
and selinux_socket_connect_helper(), which process sockaddr structure
(address and port), should use the address family from that structure
too, and not from the socket one.

The initialization of the data for the audit record is moved above,
in selinux_socket_bind(), so that there is no duplicate changes and
code.

Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()

Commit d452930fd3b9 ("selinux: Add SCTP support") breaks compatibility
with the old programs that can pass sockaddr_in structure with AF_UNSPEC
and INADDR_ANY to bind(). As a result, bind() returns EAFNOSUPPORT error.
This was found with LTP/asapi_01 test.

Similar to commit 29c486df6a20 ("net: ipv4: relax AF_INET check in
bind()"), which relaxed AF_INET check for compatibility, add AF_UNSPEC
case to AF_INET and make sure that the address is INADDR_ANY.

Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

__inode_security_revalidate() never gets NULL opt_dentry

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fix breakage caused by d_find_alias() semantics change

"VFS: don't keep disconnected dentries on d_anon" had a non-trivial
side-effect - d_unhashed() now returns true for those dentries,
making d_find_alias() skip them altogether. For most of its callers
that's fine - we really want a connected alias there. However,
there is a codepath where we relied upon picking such aliases
if nothing else could be found - selinux delayed initialization
of contexts for inodes on already mounted filesystems used to
rely upon that.

Cc: stable@kernel.org # f1ee616214cb "VFS: don't keep disconnected dentries on d_anon"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

selinux: provide socketpair callback

Make sure to implement the new socketpair callback so the SO_PEERSEC
call on socketpair(2)s will return correct information.

Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

net: initial AF_XDP skeleton

Buildable skeleton of AF_XDP without any functionality. Just what it
takes to register a new address family.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

ipc/msg: introduce msgctl(MSG_STAT_ANY)

There is a permission discrepancy when consulting msq ipc object
metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.

While this might have security implications via info leaking (albeit no
writing to the msq metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.

This patch introduces a new MSG_STAT_ANY command such that the msq ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.

Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem: introduce semctl(SEM_STAT_ANY)

There is a permission discrepancy when consulting shm ipc object
metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.

While this might have security implications via info leaking (albeit no
writing to the sma metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.

This patch introduces a new SEM_STAT_ANY command such that the sem ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.

Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/shm: introduce shmctl(SHM_STAT_ANY)

Patch series "sysvipc: introduce STAT_ANY commands", v2.

The following patches adds the discussed (see [1]) new command for shm
as well as for sems and msq as they are subject to the same
discrepancies for ipc object permission checks between the syscall and
via procfs. These new commands are justified in that (1) we are stuck
with this semantics as changing syscall and procfs can break userland;
and (2) some users can benefit from performance (for large amounts of
shm segments, for example) from not having to parse the procfs
interface.

Once merged, I will submit the necesary manpage updates. But I'm thinking
something like:

: diff --git a/man2/shmctl.2 b/man2/shmctl.2
: index 7bb503999941..bb00bbe21a57 100644
: --- a/man2/shmctl.2
: +++ b/man2/shmctl.2
: @@ -41,6 +41,7 @@
: .\" 2005-04-25, mtk -- noted aberrant Linux behavior w.r.t. new
: .\" attaches to a segment that has already been marked for deletion.
: .\" 2005-08-02, mtk: Added IPC_INFO, SHM_INFO, SHM_STAT descriptions.
: +.\" 2018-02-13, dbueso: Added SHM_STAT_ANY description.
: .\"
: .TH SHMCTL 2 2017-09-15 "Linux" "Linux Programmer's Manual"
: .SH NAME
: @@ -242,6 +243,18 @@ However, the
: argument is not a segment identifier, but instead an index into
: the kernel's internal array that maintains information about
: all shared memory segments on the system.
: +.TP
: +.BR SHM_STAT_ANY " (Linux-specific)"
: +Return a
: +.I shmid_ds
: +structure as for
: +.BR SHM_STAT .
: +However, the
: +.I shm_perm.mode
: +is not checked for read access for
: +.IR shmid ,
: +resembing the behaviour of
: +/proc/sysvipc/shm.
: .PP
: The caller can prevent or allow swapping of a shared
: memory segment with the following \fIcmd\fP values:
: @@ -287,7 +300,7 @@ operation returns the index of the highest used entry in the
: kernel's internal array recording information about all
: shared memory segments.
: (This information can be used with repeated
: -.B SHM_STAT
: +.B SHM_STAT/SHM_STAT_ANY
: operations to obtain information about all shared memory segments
: on the system.)
: A successful
: @@ -328,7 +341,7 @@ isn't accessible.
: \fIshmid\fP is not a valid identifier, or \fIcmd\fP
: is not a valid command.
: Or: for a
: -.B SHM_STAT
: +.B SHM_STAT/SHM_STAT_ANY
: operation, the index value specified in
: .I shmid
: referred to an array slot that is currently unused.

This patch (of 3):

There is a permission discrepancy when consulting shm ipc object metadata
between /proc/sysvipc/shm (0444) and the SHM_STAT shmctl command. The
later does permission checks for the object vs S_IRUGO. As such there can
be cases where EACCESS is returned via syscall but the info is displayed
anyways in the procfs files.

While this might have security implications via info leaking (albeit no
writing to the shm metadata), this behavior goes way back and showing all
the objects regardless of the permissions was most likely an overlook - so
we are stuck with it. Furthermore, modifying either the syscall or the
procfs file can cause userspace programs to break (ie ipcs). Some
applications require getting the procfs info (without root privileges) and
can be rather slow in comparison with a syscall -- up to 500x in some
reported cases.

This patch introduces a new SHM_STAT_ANY command such that the shm ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.

[1] https://lkml.org/lkml/2017/12/19/220

Link: http://lkml.kernel.org/r/20180215162458.10059-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Robert Kettler <robert.kettler@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net: Drop pernet_operations::async

Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

security: Add a cred_getsecid hook

For IMA purposes, we want to be able to obtain the prepared secid in the
bprm structure before the credentials are committed. Add a cred_getsecid
hook that makes this possible.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

msg/security: Pass kern_ipc_perm not msg_queue into the msg_queue security hooks

All of the implementations of security hooks that take msg_queue only
access q_perm the struct kern_ipc_perm member. This means the
dependencies of the msg_queue security hooks can be simplified by
passing the kern_ipc_perm member of msg_queue.

Making this change will allow struct msg_queue to become private to
ipc/msg.c.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

shm/security: Pass kern_ipc_perm not shmid_kernel into the shm security hooks

All of the implementations of security hooks that take shmid_kernel only
access shm_perm the struct kern_ipc_perm member. This means the
dependencies of the shm security hooks can be simplified by passing
the kern_ipc_perm member of shmid_kernel..

Making this change will allow struct shmid_kernel to become private to ipc/shm.c.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

sem/security: Pass kern_ipc_perm not sem_array into the sem security hooks

All of the implementations of security hooks that take sem_array only
access sem_perm the struct kern_ipc_perm member. This means the
dependencies of the sem security hooks can be simplified by passing
the kern_ipc_perm member of sem_array.

Making this change will allow struct sem and struct sem_array
to become private to ipc/sem.c.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>