arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C

The USB-C PD manages plug orientation, power delivery, and our endpoint
for the USB interface. Add this node and include its endpoint.

Configure USB0 for role-switching and wire it to our USB-C PD endpoint.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240425152558.485763-1-ggiordano@phytec.com
Signed-off-by: Nishanth Menon <nm@ti.com>

arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec

The Audio Codec runs over the MCASP (Multichannel Audio Serial Port).

Add pinmux for the Audio Reference Clock and MCASP2.

Add DT nodes for Audio Codec, MCASP2, VCC 1v8 and VCC 3v3 regulators.

Additionally, create a sound node that connects our sound card and the
MCASP2.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240404184250.3772829-1-ggiordano@phytec.com
Signed-off-by: Nishanth Menon <nm@ti.com>

arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate

The phyBOARD-Lyra has one TCAN1044VDD CAN transceiver which supports
CAN FD at 8 Mbps.

Increase the maximum bitrate to 8 Mbps.

Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240402160825.1516036-2-nmorrisson@phytec.com
Signed-off-by: Nishanth Menon <nm@ti.com>

arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs

Remove DLL properties which are not applicable for soft PHYs
since these PHYs do not have a DLL to enable.

Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Verdin AM62
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213235701.2438513-7-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: phycore*: Add MIT license along with GPL-2.0

Modify license to include dual licensing as GPL-2.0-only OR MIT
license for device trees belonging to PHYTEC Messtechnik GmbH and
PHYTEC America, LLC platforms. This allows for Linux kernel device
tree to be used in other Operating System ecosystems such as Zephyr or
FreeBSD.

While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync
with latest SPDX conventions (GPL-2.0 is deprecated).

While at this, update the copyright year to sync with current year
to indicate license change.

Cc: Garrett Giordano <ggiordano@phytec.com>
Cc: Wadim Egorov <w.egorov@phytec.de>

Acked-by: Garrett Giordano <ggiordano@phytec.com>
Acked-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240122145539.194512-15-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: Disable clock output of the ethernet PHY

The clock on the ethernet1 PHY is turned on by default. This turns
the clock off as we do not use it.

Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240119225257.403222-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name

The GPIO Expander has a line name defined as GPIO0_HDMI_RST. This line
is no longer associated with the HDMI Reset so we removed it.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20231204222811.2344460-3-ggiordano@phytec.com
Signed-off-by: Nishanth Menon <nm@ti.com>

arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support

The DSS outputs DPI signals via its second video port (VP2). The DPI
output from DSS is 24 bits (RGB888) and is forwarded to an HDMI
transmitter (SIL9022) on the board.

Add pinmux for DSS DPI output and HDMI Interrupt.

Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector
on the phyBOARD-Lyra.

Additionally, connect the output of DSS (VP2) with input of the HDMI TX,
and the output of HDMI TX to the input of the HDMI connector.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20231204222811.2344460-2-ggiordano@phytec.com
Signed-off-by: Nishanth Menon <nm@ti.com>

arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency

The gpio-expander on i2c-1 has a maximum frequency of 100kHz. Update our
main_i2c1 frequency to allow the nxp,pcf8574 gpio-expander to function
properly.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20231204222811.2344460-1-ggiordano@phytec.com
Signed-off-by: Nishanth Menon <nm@ti.com>

arm64: dts: ti: Unify pin group node names for make dtbs checks

Prepare for pinctrl-single yaml binding and unify pin group node names.

Let's standardize on pin group node naming ending in -pins. As we don't
necessarily have a SoC specific compatible property for pinctrl-single.
I'd rather not add a pattern match for pins somewhere in the name for all
the users.

Trying to add matches for pins-default will be futile as on the earlier
SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so
on that would need to be matched.

And as the node is a pin group, let's prefer to use naming -pins rather
than -pin as more pins may need to be added to the pin group later on.

Signed-off-by: Tony Lindgren <tony@atomide.com>
[vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625

The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC.
It can be used in combination with different carrier boards.
This module can come with different sizes and models for
DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family.

A development Kit, called phyBOARD-Lyra [2] is used as a carrier board
reference design around the AM62x SoM.

Supported features:
* Debug UART
* SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* GPIO Expander
* LEDs
* USB

For more details, see:

[1] Product page SoM: https://www.phytec.com/product/phycore-am62x
[2] Product page CB: https://www.phytec.com/product/phyboard-am62x

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230504140143.1425951-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>