arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards

gpio_pwrctrl2 gets duplicated by both rk806_dvs1_null and rk806_dvs2_null
gpio_pwrctrl1 is unset. This typo appears in multiple files. Let's fix them.

Note: I haven't had the chance to test them all because I don't own all
of these boards (obviously). Please test if it's needed.

Signed-off-by: Jing Luo <jing@jing.rocks>
Link: https://lore.kernel.org/r/20240420130355.639406-1-jing@jing.rocks
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar

The Jaguar SBC provides an M.2 slot connected to the pcie3 controller.
In contrast to a number of other boards the pcie-refclk is gpio-controlled,
so the necessary clock and is added to the list of pcie3 clocks.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240423074956.2622318-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arm64: dts: rockchip: enable gpu on rk3588-jaguar

Enable the mali gpu node and add the board-specific supply-regulator.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240327112120.1181570-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds

The default status is okay, so it is definitly not necessary to set
it on a newly added node.

Fixes: d1b8b36a2cc5 ("arm64: dts: rockchip: add Theobroma Jaguar SBC")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobrona-systems.com>
Link: https://lore.kernel.org/r/20240129114851.2019861-1-heiko@sntech.de

arm64: dts: rockchip: add Theobroma Jaguar SBC

Add a board dts for the Jaguar SBC from Theobroma-Systems

JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and
is targeting Autonomous Mobile Robots (AMR).

It features:
* LPDDR4X (up to 16GB)
* 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131)
* PCIe 3.0 4-lane on M.2 M-key connector
* PCIe 2.1 1-lane on M.2 E-key
* USB 2.0 on M.2 E-key
* 2x USB3 OTG type-c ports with DP Alt-Mode
* USB2 host port
* HDMI output
* 2x camera connectors, each exposing:
* 2-lane MIPI-CSI
* 1v2, 1v8, 2v8 power rails
* I2C bus
* GPIOs
* PPS input
* CAN
* RS485 UART
* FAN connector
* SD card slot
* eMMC (up to 256GB)
* RTC backup battery
* Companion microcontroller
* ISL1208 RTC emulation
* AMC6821 PWM emulation
* On/off buzzer control
* Secure Element
* 80-pin Mezzanine connector for daughterboards:
* GPIOs
* 1Gbps Ethernet
* PCIe 2.1 1-lane
* 2x 2-lane MIPI-CSI
* ADC channel
* I2C bus
* PWM
* UART
* SPI
* SDIO
* CAN
* I2S
* 1v8, 3v3, 5v0, dc-in (12-24V) power rails

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20231201191103.343097-3-heiko@sntech.de