tls: fix lockless read of strp->msg_ready in ->poll

tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.

Fixes: 121dca784fc0 ("tls: suppress wakeups unless we have a full record")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/tls: Use tcp_read_sock() instead of ops->read_sock()

TLS resets the protocol operations, so the read_sock() callback might
be changed, too.
In this case using sock->ops->readsock() in tls_strp_read_copyin() will
enter an infinite recursion if the read_sock() callback is calling
tls_rx_rec_wait() which will call into sock->ops->readsock() via
tls_strp_read_copyin().
But as tls_strp_read_copyin() is supposed to produce data from the
consumed socket and that socket is always a TCP socket we can call
tcp_read_sock() directly without having to deal with callbacks.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230726191556.41714-5-hare@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: improve lockless access safety of tls_err_abort()

Most protos' poll() methods insert a memory barrier between
writes to sk_err and sk_error_report(). This dates back to
commit a4d258036ed9 ("tcp: Fix race in tcp_poll").

I guess we should do the same thing in TLS, tcp_poll() does
not hold the socket lock.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: rx: strp: preserve decryption status of skbs when needed

When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.

Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.

Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: rx: strp: factor out copying skb data

We'll need to copy input skbs individually in the next patch.
Factor that code out (without assuming we're copying a full record).

Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: rx: strp: fix determining record length in copy mode

We call tls_rx_msg_size(skb) before doing skb->len += chunk.
So the tls_rx_msg_size() code will see old skb->len, most
likely leading to an over-read.

Worst case we will over read an entire record, next iteration
will try to trim the skb but may end up turning frag len negative
or discarding the subsequent record (since we already told TCP
we've read it during previous read but now we'll trim it out of
the skb).

Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: rx: strp: force mixed decrypted records into copy mode

If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.

This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.

Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: rx: strp: set the skb->len of detached / CoW'ed skbs

alloc_skb_with_frags() fills in page frag sizes but does not
set skb->len and skb->data_len. Set those correctly otherwise
device offload will most likely generate an empty skb and
hit the BUG() at the end of __skb_nsg().

Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: strp: make sure the TCP skbs do not have overlapping data

TLS tries to get away with using the TCP input queue directly.
This does not work if there is duplicated data (multiple skbs
holding bytes for the same seq number range due to retransmits).
Check for this condition and fall back to copy mode, it should
be rare.

Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: rx: device: don't try to copy too much on detach

Another device offload bug, we use the length of the output
skb as an indication of how much data to copy. But that skb
is sized to offset + record length, and we start from offset.
So we end up double-counting the offset which leads to
skb_copy_bits() returning -EFAULT.

Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Ran Rozenstein <ranro@nvidia.com>
Link: https://lore.kernel.org/r/20220809175544.354343-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: rx: Fix unsigned comparison with less than zero

The return from the call to tls_rx_msg_size() is int, it can be
a negative error code, however this is being assigned to an
unsigned long variable 'sz', so making 'sz' an int.

Eliminate the following coccicheck warning:
./net/tls/tls_strp.c:211:6-8: WARNING: Unsigned expression compared with zero: sz < 0

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220728031019.32838-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: strp: rename and multithread the workqueue

Paolo points out that there seems to be no strong reason strparser
users a single threaded workqueue. Perhaps there were some performance
or pinning considerations? Since we don't know (and it's the slow path)
let's default to the most natural, multi-threaded choice.

Also rename the workqueue to "tls-".

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: rx: do not use the standard strparser

TLS is a relatively poor fit for strparser. We pause the input
every time a message is received, wait for a read which will
decrypt the message, start the parser, repeat. strparser is
built to delineate the messages, wrap them in individual skbs
and let them float off into the stack or a different socket.
TLS wants the data pages and nothing else. There's no need
for TLS to keep cloning (and occasionally skb_unclone()'ing)
the TCP rx queue.

This patch uses a pre-allocated skb and attaches the skbs
from the TCP rx queue to it as frags. TLS is careful never
to modify the input skb without CoW'ing / detaching it first.

Since we call TCP rx queue cleanup directly we also get back
the benefit of skb deferred free.

Overall this results in a 6% gain in my benchmarks.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: rx: device: add input CoW helper

Wrap the remaining skb_cow_data() into a helper, so it's easier
to replace down the lane. The new version will change the skb
so make sure relevant pointers get reloaded after the call.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: rx: device: keep the zero copy status with offload

The non-zero-copy path assumes a full skb with decrypted contents.
This means the device offload would have to CoW the data. Try
to keep the zero-copy status instead, copy the data to user space.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tls: rx: async: hold onto the input skb

Async crypto currently benefits from the fact that we decrypt
in place. When we allow input and output to be different skbs
we will have to hang onto the input while we move to the next
record. Clone the inputs and keep them on a list.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>