netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c

The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

netfilter: ipset: fix hash:net,port,net hang with /0 subnet

The hash:net,port,net set type supports /0 subnets. However, the patch
commit 5f7b51bf09baca8e titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf09baca8e brings it out earlier.

Handle /0 subnets properly in hash:net,port,net set types.

Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Limit the maximal range of consecutive elements to add/delete

The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.

Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Expose the initval hash parameter to userspace

It makes possible to reproduce exactly the same set after a save/restore.

Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Add bucketsize parameter to all hash types

The parameter defines the upper limit in any hash bucket at adding new entries
from userspace - if the limit would be exceeded, ipset doubles the hash size
and rehashes. It means the set may consume more memory but gives faster
evaluation at matching in the set.

Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: remove inline from static functions in .c files.

The inline function-specifier should not be used for static functions
defined in .c files since it bloats the kernel. Instead leave the
compiler to decide which functions to inline.

While a couple of the files affected (ip_set_*_gen.h) are technically
headers, they contain templates for generating the common parts of
particular set-types and so we treat them like .c files.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update my email address

It's better to use my kadlec@netfilter.org email address in
the source code. I might not be able to use
kadlec@blackhole.kfki.hu in the future.

Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net

Allow /0 as advertised for hash:net,port,net sets.

For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."

Make that statement true.

Before:

# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid

# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid

After:

# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
# ipset test cidrzero 192.168.205.129,12345,172.16.205.129
192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.

# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
# ipset test cidrzero6 fe80::1,12345,ff00::1
fe80::1,tcp:12345,ff00::1 is in set cidrzero6.

See also:

https://bugzilla.kernel.org/show_bug.cgi?id=200897
https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c

Signed-off-by: Eric Westbrook <linux@westbrook.io>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Fix wraparound in hash:*net* types

Fix wraparound bug which could lead to memory exhaustion when adding an
x.x.x.x-255.255.255.255 range to any hash:*net* types.

Fixes Netfilter's bugzilla id #1212, reported by Thomas Schwark.

Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses

Wrong comparison prevented the hash types to add a range with more than
2^31 addresses but reported as a success.

Fixes Netfilter's bugzilla id #1005, reported by Oleg Serditov and
Oliver Ford.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Make struct htype per ipset family

Before this patch struct htype created at the first source
of ip_set_hash_gen.h and it is common for both IPv4 and IPv6
set variants.

Make struct htype per ipset family and use NLEN to make
nets array fixed size to simplify struct htype allocation.

Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Fixing unnamed union init

In continue to proposed Vinson Lee's post [1], this patch fixes compilation
issues founded at gcc 4.4.7. The initialization of .cidr field of unnamed
unions causes compilation error in gcc 4.4.x.

References

Visible links
[1] https://lkml.org/lkml/2015/7/5/74

Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Fix coding styles reported by checkpatch.pl

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Introduce RCU locking in hash:* types

Three types of data need to be protected in the case of the hash types:

a. The hash buckets: standard rcu pointer operations are used.
b. The element blobs in the hash buckets are stored in an array and
a bitmap is used for book-keeping to tell which elements in the array
are used or free.
c. Networks per cidr values and the cidr values themselves are stored
in fix sized arrays and need no protection. The values are modified
in such an order that in the worst case an element testing is repeated
once with the same cidr value.

The ipset hash approach uses arrays instead of lists and therefore is
incompatible with rhashtable.

Performance is tested by Jesper Dangaard Brouer:

Simple drop in FORWARD
~~~~~~~~~~~~~~~~~~~~~~

Dropping via simple iptables net-mask match::

iptables -t raw -N simple || iptables -t raw -F simple
iptables -t raw -I simple -s 198.18.0.0/15 -j DROP
iptables -t raw -D PREROUTING -j simple
iptables -t raw -I PREROUTING -j simple

Drop performance in "raw": 11.3Mpps

Generator: sending 12.2Mpps (tx:12264083 pps)

Drop via original ipset in RAW table
~~~~~~~~~~~~~~~~~~~~~~~~~~~

Create a set with lots of elements::

sudo ./ipset destroy test
echo "create test hash:ip hashsize 65536" > test.set
for x in `seq 0 255`; do
for y in `seq 0 255`; do
echo "add test 198.18.$x.$y" >> test.set
done
done
sudo ./ipset restore < test.set

Dropping via ipset::

iptables -t raw -F
iptables -t raw -N net198 || iptables -t raw -F net198
iptables -t raw -I net198 -m set --match-set test src -j DROP
iptables -t raw -I PREROUTING -j net198

Drop performance in "raw" with ipset: 8Mpps

Perf report numbers ipset drop in "raw"::

+ 24.65% ksoftirqd/1 [ip_set] [k] ip_set_test
- 21.42% ksoftirqd/1 [kernel.kallsyms] [k] _raw_read_lock_bh
- _raw_read_lock_bh
+ 99.88% ip_set_test
- 19.42% ksoftirqd/1 [kernel.kallsyms] [k] _raw_read_unlock_bh
- _raw_read_unlock_bh
+ 99.72% ip_set_test
+ 4.31% ksoftirqd/1 [ip_set_hash_ip] [k] hash_ip4_kadt
+ 2.27% ksoftirqd/1 [ixgbe] [k] ixgbe_fetch_rx_buffer
+ 2.18% ksoftirqd/1 [ip_tables] [k] ipt_do_table
+ 1.81% ksoftirqd/1 [ip_set_hash_ip] [k] hash_ip4_test
+ 1.61% ksoftirqd/1 [kernel.kallsyms] [k] __netif_receive_skb_core
+ 1.44% ksoftirqd/1 [kernel.kallsyms] [k] build_skb
+ 1.42% ksoftirqd/1 [kernel.kallsyms] [k] ip_rcv
+ 1.36% ksoftirqd/1 [kernel.kallsyms] [k] __local_bh_enable_ip
+ 1.16% ksoftirqd/1 [kernel.kallsyms] [k] dev_gro_receive
+ 1.09% ksoftirqd/1 [kernel.kallsyms] [k] __rcu_read_unlock
+ 0.96% ksoftirqd/1 [ixgbe] [k] ixgbe_clean_rx_irq
+ 0.95% ksoftirqd/1 [kernel.kallsyms] [k] __netdev_alloc_frag
+ 0.88% ksoftirqd/1 [kernel.kallsyms] [k] kmem_cache_alloc
+ 0.87% ksoftirqd/1 [xt_set] [k] set_match_v3
+ 0.85% ksoftirqd/1 [kernel.kallsyms] [k] inet_gro_receive
+ 0.83% ksoftirqd/1 [kernel.kallsyms] [k] nf_iterate
+ 0.76% ksoftirqd/1 [kernel.kallsyms] [k] put_compound_page
+ 0.75% ksoftirqd/1 [kernel.kallsyms] [k] __rcu_read_lock

Drop via ipset in RAW table with RCU-locking
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

With RCU locking, the RW-lock is gone.

Drop performance in "raw" with ipset with RCU-locking: 11.3Mpps

Performance-tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Fix cidr handling for hash:*net* types

Commit "Simplify cidr handling for hash:*net* types" broke the cidr
handling for the hash:*net* types when the sets were used by the SET
target: entries with invalid cidr values were added to the sets.
Reported by Jonathan Johnson.

Testsuite entry is added to verify the fix.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Check CIDR value only when attribute is given

There is no reason to check CIDR value regardless attribute
specifying CIDR is given.

Initialize cidr array in element structure on element structure
declaration to let more freedom to the compiler to optimize
initialization right before element structure is used.

Remove local variables cidr and cidr2 for netnet and netportnet
hashes as we do not use packed cidr value for such set types and
can store value directly in e.cidr[].

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Make sure we always return line number on batch

Even if we return with generic IPSET_ERR_PROTOCOL it is good idea
to return line number if we called in batch mode.

Moreover we are not always exiting with IPSET_ERR_PROTOCOL. For
example hash:ip,port,net may return IPSET_ERR_HASH_RANGE_UNSUPPORTED
or IPSET_ERR_INVALID_CIDR.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Check extensions attributes before getting extensions.

Make all extensions attributes checks within ip_set_get_extensions()
and reduce number of duplicated code.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: Check for comment netlink attribute length

Ensure userspace supplies string not longer than
IPSET_MAX_COMMENT_SIZE.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Return bool values instead of int

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Check IPSET_ATTR_PORT only once

We do not need to check tb[IPSET_ATTR_PORT] != NULL before
retrieving port, as this attribute is known to exist due to
ip_set_attr_netorder() returning true only when attribute
exists and it is in network byte order.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Return ipset error instead of bool

Statement ret = func1() || func2() returns 0 when both func1()
and func2() return 0, or 1 if func1() or func2() returns non-zero.

However in our case func1() and func2() returns error code on
failure, so it seems good to propagate such error codes, rather
than returning 1 in case of failure.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Preprocessor directices cleanup

* Undefine mtype_data_reset_elem before defining.

* Remove duplicated mtype_gc_init undefine, move
mtype_gc_init define closer to mtype_gc define.

* Use htype instead of HTYPE in IPSET_TOKEN(HTYPE, _create)().

* Remove PF definition from sets: no more used.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: No need to make nomatch bitfield

We do not store cidr packed with no match, so there is no
need to make nomatch bitfield.

This simplifies mtype_data_reset_flags() a bit.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Explicitly add padding elements to hash:net, net and hash:net, port, net

The elements must be u32 sized for the used hash function.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Add skbinfo extension kernel support for the hash set types.

Add skbinfo extension kernel support for the hash set types.
Inroduce the new revisions of all hash set types.

Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: netnet,netportnet: Fix value range support for IPv4

Ranges of values are broken with hash:net,net and hash:net,port,net.

hash:net,net
============

# ipset create test-nn hash:net,net
# ipset add test-nn 10.0.10.1-10.0.10.127,10.0.0.0/8

# ipset list test-nn
Name: test-nn
Type: hash:net,net
Revision: 0
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 16960
References: 0
Members:
10.0.10.1,10.0.0.0/8

# ipset test test-nn 10.0.10.65,10.0.0.1
10.0.10.65,10.0.0.1 is NOT in set test-nn.
# ipset test test-nn 10.0.10.1,10.0.0.1
10.0.10.1,10.0.0.1 is in set test-nn.

hash:net,port,net
=================

# ipset create test-npn hash:net,port,net
# ipset add test-npn 10.0.10.1-10.0.10.127,tcp:80,10.0.0.0/8
# ipset list test-npn
Name: test-npn
Type: hash:net,port,net
Revision: 0
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 17344
References: 0
Members:
10.0.10.8/29,tcp:80,10.0.0.0
10.0.10.16/28,tcp:80,10.0.0.0
10.0.10.2/31,tcp:80,10.0.0.0
10.0.10.64/26,tcp:80,10.0.0.0
10.0.10.32/27,tcp:80,10.0.0.0
10.0.10.4/30,tcp:80,10.0.0.0
10.0.10.1,tcp:80,10.0.0.0
# ipset list test-npn
# ipset test test-npn 10.0.10.126,tcp:80,10.0.0.2
10.0.10.126,tcp:80,10.0.0.2 is NOT in set test-npn.
# ipset test test-npn 10.0.10.126,tcp:80,10.0.0.0
10.0.10.126,tcp:80,10.0.0.0 is in set test-npn.

# ipset create test-npn hash:net,port,net
# ipset add test-npn 10.0.10.0/24,tcp:80-81,10.0.0.0/8
# ipset list test-npn
Name: test-npn
Type: hash:net,port,net
Revision: 0
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 17024
References: 0
Members:
10.0.10.0,tcp:80,10.0.0.0
10.0.10.0,tcp:81,10.0.0.0
# ipset test test-npn 10.0.10.126,tcp:80,10.0.0.0
10.0.10.126,tcp:80,10.0.0.0 is NOT in set test-npn.
# ipset test test-npn 10.0.10.0,tcp:80,10.0.0.0
10.0.10.0,tcp:80,10.0.0.0 is in set test-npn.

Correctly setup from..to variables where no IPSET_ATTR_IP_TO{,2}
attribute is given, so in range processing loop we construct proper
cidr value. Check whenever we have no ranges and can short cut in
hash:net,net properly. Use unlikely() where appropriate, to comply
with other modules.

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: add forceadd kernel support for hash set types

Adds a new property for hash set types, where if a set is created
with the 'forceadd' option and the set becomes full the next addition
to the set may succeed and evict a random entry from the set.

To keep overhead low eviction is done very simply. It checks to see
which bucket the new entry would be added. If the bucket's pos value
is non-zero (meaning there's at least one entry in the bucket) it
replaces the first entry in the bucket. If pos is zero, then it continues
down the normal add process.

This property is useful if you have a set for 'ban' lists where it may
not matter if you release some entries from the set early.

Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

netfilter: ipset: The unnamed union initialization may lead to compilation error

The unnamed union should be possible to be initialized directly, but
unfortunately it's not so:

/usr/src/ipset/kernel/net/netfilter/ipset/ip_set_hash_netnet.c: In
function ?hash_netnet4_kadt?:
/usr/src/ipset/kernel/net/netfilter/ipset/ip_set_hash_netnet.c:141:
error: unknown field ?cidr? specified in initializer

Reported-by: Husnu Demir <hdemir@metu.edu.tr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: Add hash:net,port,net module to kernel.

This adds a new set that provides similar functionality to ip,port,net
but permits arbitrary size subnets for both the first and last
parameter.

Signed-off-by: Oliver Smith <oliver@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>