mac802154: Add MLME Tx locked helpers

These have the exact same behavior as before, except they expect the
rtnl to be already taken (and will complain otherwise). This allows
performing MLME transmissions from different contexts.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Fix a Tx warning check

The purpose of the netif_is_down() helper was to ensure that the network
interface used was still up when performing the transmission. What it
actually did was to check if _all_ interfaces were up. This was not
noticed at that time because I did not use interfaces at all before
discussing with Alexander Aring about how to handle coordinators
properly.

Drop the helper and call netif_running() on the right sub interface
object directly.

Fixes: 4f790184139b ("net: mac802154: Add a warning in the slow path")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220617192914.1275611-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

mac802154: fix atomic_dec_and_test checks

We need to call wake_up() when hold_txs reaches zero. The semantic of
atomic_dec_and_test() is that it returns true when it's zero.

Fixes: f0feb3490473 ("net: mac802154: Introduce a tx queue flushing mechanism")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220613043735.1039895-3-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Add a warning in the slow path

In order to be able to detect possible conflicts between the net
interface core and the ieee802154 core, let's add a warning in the slow
path: we want to be sure that whenever we start an asynchronous MLME
transmission (which can be fully asynchronous) the net core somehow
agrees that this transmission is possible, ie. the device was not
stopped. Warning in this case would allow us to track down more easily
possible issues with the MLME logic if we ever get reports.

Unlike in the hot path, such a situation cannot be handled.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-12-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Add a warning in the hot path

We should never start a transmission after the queue has been stopped.

But because it might work we don't kill the function here but rather
warn loudly the user that something is wrong.

Set a flag when the queue should remain stopped. Reset this flag when
the queue actually gets restarded. Just check this value to know if a
transmission is legitimate, warn if it is not.

Turn the flags variable into an unsigned long to allow the use of atomic
helpers on it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-11-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Introduce a synchronous API for MLME commands

This is the slow path, we need to wait for each command to be processed
before continuing so let's introduce an helper which does the
transmission and blocks until it gets notified of its asynchronous
completion. This helper is going to be used when introducing scan
support.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-10-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Introduce a tx queue flushing mechanism

Right now we are able to stop a queue but we have no indication if a
transmission is ongoing or not.

Thanks to recent additions, we can track the number of ongoing
transmissions so we know if the last transmission is over. Adding on top
of it an internal wait queue also allows to be woken up asynchronously
when this happens. If, beforehands, we marked the queue to be held and
stopped it, we end up flushing and stopping the tx queue.

Thanks to this feature, we will soon be able to introduce a synchronous
transmit API.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-9-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Create a hot tx path

Let's rename the current Tx path to show that this is the "hot" Tx
path. We will soon introduce a slower Tx path for MLME commands.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Bring the ability to hold the transmit queue

Create a hold_txs atomic variable and increment/decrement it when
relevant, ie. when we want to hold the queue or release it: currently
all the "stopped" situations are suitable, but very soon we will more
extensively use this feature for MLME purposes.

Upon release, the atomic counter is decremented and checked. If it is
back to 0, then the netif queue gets woken up. This makes the whole
process fully transparent, provided that all the users of
ieee802154_wake/stop_queue() now call ieee802154_hold/release_queue()
instead.

In no situation individual drivers should call any of these helpers
manually in order to avoid messing with the counters. There are other
functions more suited for this purpose which have been introduced, such
as the _xmit_complete() and _xmit_error() helpers which will handle all
that for them.

One advantage is that, as no more drivers call the stop/wake helpers
directly, we can safely stop exporting them and only declare the
hold/release ones in a header only accessible to the core.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Follow the count of ongoing transmissions

In order to create a synchronous API for MLME command purposes, we need
to be able to track the end of the ongoing transmissions. Let's
introduce an atomic variable which is incremented when a transmission
starts and decremented when relevant so that we know at any moment
whether there is an ongoing transmission.

The counter gets decremented in the following situations:
- The operation is asynchronous and there was a failure during the
offloading process.
- The operation is synchronous and the synchronous operation failed.
- The operation finished, either successfully or not.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Enhance the error path in the main tx helper

Before adding more logic in the error path, let's move the wake queue
call there, rename the default label and create an additional one.

There is no functional change.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Rename the main tx_work struct

This entry is dedicated to synchronous transmissions done by drivers
without async hook. Make this clearer that this is not a work that any
driver can use by at least prefixing it with "sync_". While at it, let's
enhance the comment explaining why we choose one or the other.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

net: mac802154: Rename the synchronous xmit worker

There are currently two driver hooks: one is synchronous, the other is
not. We cannot rely on driver implementations to provide a synchronous
API (which is related to the bus medium more than a wish to have a
synchronized implementation) so we are going to introduce a sync API
above any kind of driver transmit function. In order to clarify what
this worker is for (synchronous driver implementation), let's rename it
so that people don't get bothered by the fact that their driver does not
make use of the "xmit worker" which is a too generic name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

mac802154: tx: fix use-after-free

syzbot reported a bug in ieee802154_tx() [1]

A similar issue in ieee802154_xmit_worker() is also fixed in this patch.

[1]
BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88
Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928

CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88
ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130
__netdev_start_xmit include/linux/netdevice.h:4634 [inline]
netdev_start_xmit include/linux/netdevice.h:4648 [inline]
dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203
packet_snd net/packet/af_packet.c:2989 [inline]
packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d5b9
Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9
RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b
RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec
R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec

Allocated by task 928:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461
slab_post_alloc_hook mm/slab.h:518 [inline]
slab_alloc_node mm/slab.c:3254 [inline]
kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574
__alloc_skb+0x71/0x550 net/core/skbuff.c:198
alloc_skb include/linux/skbuff.h:1094 [inline]
alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771
sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348
packet_alloc_skb net/packet/af_packet.c:2837 [inline]
packet_snd net/packet/af_packet.c:2932 [inline]
packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 928:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422
__cache_free mm/slab.c:3418 [inline]
kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622
__kfree_skb net/core/skbuff.c:679 [inline]
consume_skb net/core/skbuff.c:838 [inline]
consume_skb+0xcf/0x160 net/core/skbuff.c:832
__dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107
fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81
drv_xmit_async net/mac802154/driver-ops.h:16 [inline]
ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81
ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130
__netdev_start_xmit include/linux/netdevice.h:4634 [inline]
netdev_start_xmit include/linux/netdevice.h:4648 [inline]
dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203
packet_snd net/packet/af_packet.c:2989 [inline]
packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8880251a8c00
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 112 bytes inside of
224-byte region [ffff8880251a8c00, ffff8880251a8ce0)
The buggy address belongs to the page:
page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00
raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb

Fixes: 409c3b0c5f03 ("mac802154: tx: move stats tx increment")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: linux-wpan@vger.kernel.org
Link: https://lore.kernel.org/r/20200908104025.4009085-1-edumazet@google.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mac802154: tx: expand tailroom if necessary

This patch is necessary if case of AF_PACKET or other socket interface
which I am aware of it and didn't allocated the necessary room.

Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

mac802154: tx: fix synced xmit deadlock

This patch reverts 6001d52 ("mac802154: tx: don't allow if down while
sync tx"). This has side effects with stop callback which flush the
transmit workqueue. The stop callback will wait until the workqueue is
flushed and holding the rtnl lock. That means it can happen that the stop
callback waits forever because it try to lock the rtnl mutex which is
already hold by stop callback.

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

ieee802154: change mtu size behaviour

This patch changes the mtu size of 802.15.4 interfaces. The current
setting is the meaning of the maximum transport unit with mac header,
which is 127 bytes according 802.15.4. The linux meaning of the mtu size
field is the maximum payload of a mac frame. Like in ethernet, which is
1500 bytes.

We have dynamic length of mac frames in 802.15.4, this is why we assume
the minimum header length which is hard_header_len. This contains fc and
sequence fields. These can evaluated by driver layer without additional
checks. We currently don't support to set the FCS from userspace, so we
need to subtract this from mtu size as well.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: add comments for llsec issues

While doing a little test with the llsec implementation I saw these
issues. We should move decryption and encruption somewhere else,
otherwise while capturing with wireshark the mac header shows secuirty
fields but the payload is plaintext.

A complete other issue is what doing with HardMAC drivers where the
payload is always plaintext. I think we need a special handling then in
userspace. We currently doesn't support any HardMAC transceivers, so we
should fix the first issue for SoftMAC transceivers.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: add warning if MTU exceeds

Sending over AF_PACKET RAW sockets we can sending frames which exceeds
MTU size. To handling it correct we need to change things in AF_PACKET
which knows on RAW sockets an additional FCS is set by hardware or
mac802154 transmit functionality.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

ieee802154: change needed headroom/tailroom

This patch cleanups needed_headroom, needed_tailroom and hard_header_len
fields for wpan and lowpan interfaces.

For wpan interfaces the worst case mac header len should be part of
needed_headroom, currently this is set as hard_header_len, but
hard_header_len should be set to the minimum header length which xmit
call assumes and this is the minimum frame length of 802.15.4.
The hard_header_len value will check inside send callbacl of AF_PACKET
raw sockets.

For lowpan interfaces, if fragmentation isn't needed the skb will
call dev_hard_header for 802154 layer and queue it afterwards. This
happens without new skb allocation, so we need the same headroom and
tailroom lengths like 802154 inside 802154 6lowpan layer. At least we
assume as minimum header length an ipv6 header size.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: Fix memory corruption with global deferred transmit state.

When transmitting a packet via a mac802154 driver that can sleep in
its transmit function, mac802154 defers the call to the driver's
transmit function to a per-device workqueue.

However, mac802154 uses a single global work_struct for this, which
means that if you have more than one registered mac802154 interface
in the system, and you transmit on more than one of them at the same
time, you'll very easily cause memory corruption.

This patch moves the deferred transmit processing state from global
variables to struct ieee802154_local, and this seems to fix the memory
corruption issue.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: add interframe spacing time handling

This patch adds a new interframe spacing time handling into mac802154
layer. Interframe spacing time is a time period between each transmit.
This patch adds a high resolution timer into mac802154 and starts on
xmit complete with corresponding interframe spacing expire time if
ifs_handling is true. We make it variable because it depends if
interframe spacing time is handled by transceiver or mac802154. At the
timer complete function we wake the netdev queue again. This avoids
new frame transmit in range of interframe spacing time.

For synced driver we add no handling of interframe spacing time. This
is currently a lack of support in all synced xmit drivers. I suppose
it's working because the latency of workqueue which is needed to call
spi_sync.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: separate omit tx/rx flags

This patch splits the IEEE802154_HW_OMIT_CKSUM hardware flag into
IEEE802154_HW_TX_OMIT_CKSUM and IEEE802154_HW_RX_OMIT_CKSUM. This is
useful to deliver the received crc from the driver layer to the monitor
interface. At the moment we can't do that without change the xmit
handling.

The received checksum should be visible in monitor mode only.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: use driver-ops function wrappers

This patch replaces all directly called driver ops by previous
introduced driver-ops function wrappers.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: remove monitor receive while xmit

This removes the call of monitor receive funktion when any interface
type call xmit. There exist no such use case that a monitor interface
should receive the actual sending frame. One use case could be that a
wpan interface and monitor interface could be running at the same time
on one phy. Then the monitor interface receives the wpan frames also.
Furthermore we adding support for promiscous mode setting. With
promiscous mode setting we can't run a wpan and monitor interface at the
same time.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: use put_unaligned_le16 for copy crc

This patch replaces the memcpy with a put_unaligned_le16. The placement
of crc inside of PSDU can also be unaligned. With memcpy this can fail
on some architectures.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: make worker information static

This patch moves the worker information struct out of skb control block.
Instead control block we declare it static inside of tx.c file. We can do
that, because the worker can't be used twice at the same time. It's
protected by stop and wake netdev queue.

This patch fix an issue that the "struct ieee802154_xmit_cb" doesn't fit
into the skb control block on some kernel configuartion reported by
kbuild test robot.

It was introduced by commit fe24371d6645b766c59ec664c59d0a9c310ad455
("mac802154: tx: remove kmalloc in xmit hotpath").

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: change naming convention

This patch changes the naming convention of the tx functions like
mac80211. Just with an 802154 instead 80211 inside the name.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: move stats tx increment

This patch moves the stats increment of successful transmitted packets
in the right place when the skb was really successful transmitted.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: cleanup crc calculation

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: use netdev print helpers

This patch replace the pr_foo printout function to netdev_foo printout
function. Inside the xmit handling, the interface is already known.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: don't allow if down while sync tx

This patch holds rtnl lock while sync xmit inside of workqueue.
Otherwise we could down the interface while worker xmit handling.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: add support for xmit_async callback

This patch renames the existsing xmit callback to xmit_sync and
introduces an asynchronous xmit_async function. If ieee802154_ops
doesn't provide the xmit_async callback, then we have a fallback to
the xmit_sync callback.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Alan Ott <alan@signal11.us>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: fix error handling while xmit

In case of an error we should call kfree_skb instead of consume_skb which
is called by ieee802154_xmit_complete function.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: use queue helpers in xmit worker

This patch uses the queue utility helpers inside the xmit worker of
mac802154 subsystem.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: remove xmit channel context switch

This patch removes the channel hopping feature before xmit. There are
several issues to provide a real channel hopping (timing requirements,
etc...).

We don't have any known kernelspace protocol which really use this
feature. And I don't know an real user of this feature.
We simply drop this feature now.

This patch removes also the hold of pib lock which isn't needed by any
real driver xmit callback implementation.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: squash multiple dereferencing

This patch introduce some new stack variables to avoid multiple
dereferencing inside the xmit worker function.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: remove kmalloc in xmit hotpath

This patch removes the kmalloc allocation for workqueue data. This patch
replaces the kmalloc and uses the control block of skb. The control block
has enough space and isn't use by any other layer in this case.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: tx: move xmit callback to tx file

This patch moves the netdev xmit callback functions into the tx.c file.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: rename dev_workqueue to workqueue

Small rename to use the name workqueue than dev_workqueue. To bring the
same naming convention like wireless into 802.15.4.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: introduce hw_to_local function

This patch replace the mac802154_to_priv macro with a static inline
function named hw_to_local. This brings a similar naming convention like
mac80211 stack.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: rename sdata slaves and slaves_mtx

This patch renamens the slaves attribute in sdata to interfaces and
slaves_mtx to iflist_mtx. This is similar like the mac80211 stack naming
convention.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: rename mac802154_sub_if_data

Like wireless this structure should named ieee802154_sub_if_data and not
mac802154_sub_if_data. This patch renames the struct and variables to
sdata instead priv sometimes.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: rename mac802154_priv to ieee802154_local

This patch rename the mac802154_priv to ieee802154_local. The
mac802154_priv structure is like ieee80211_local and so we name it
ieee802154_local.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

ieee802154: move wpan-phy.h to cfg802154.h

The wpan-phy header contains the wpan_phy struct information. Later this
header will be have similar function like cfg80211 header. The cfg80211
header contains the wiphy struct which is identically the wpan_phy
struct inside 802.15.4 subsystem.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Alan Ott <alan@signal11.us>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: move mac802154.h to ieee802154_i.h

This patch moves the mac802154.h internal header to ieee802154_i.h like
the wireless stack ieee80211_i.h file. This avoids confusing with the
not internal header include/net/mac802154.h header. Additional we get
the same naming conversion like mac80211 for this file.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

ieee802154: mac802154: remove FSF address

This patch removes the FSF address in files which belongs to ieee802154
and mac802154.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Alan Ott <alan@signal11.us>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

mac802154: common tx error path

This patch introduce the common error path on failure of Tx by
inserting the label 'err_tx'.

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

6lowpan: mac802154: fix coding style issues

This patch fixed the coding style issues reported by checkpatch.pl

following issues fixed:
CHECK: Alignment should match open parenthesis
WARNING: line over 80 characters
CHECK: Blank lines aren't necessary before a close brace '}'
WARNING: networking block comments don't use an empty /* line, use /* Comment...
WARNING: Missing a blank line after declarations
WARNING: networking block comments start with * on subsequent lines
CHECK: braces {} should be used on all arms of this statement

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Tested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: Keep track of the channel when changed

Two sections checked whether the current channel != the new channel
without ever setting the current channel variables.

1. net/mac802154/tx.c: Prevent set_channel() from getting called every
time a packet is sent.

2. net/mac802154/mib.c: Lock (pib_lock) accesses to current_channel and
current_page and make sure they are updated when the channel has been
changed.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: Use netif flow control

Use netif_stop_queue() and netif_wake_queue() to control the flow of
packets to mac802154 devices. Since many IEEE 802.15.4 devices have no
output buffer, and since the mac802154 xmit() function is designed to
block, netif_stop_queue() is called after each packet.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: Do not try to resend failed packets

When ops->xmit() fails, drop the packet. Devices which support hardware
ack and retry (which include all devices currently supported by mainline),
will automatically retry sending the packet (in the hardware) up to 3
times, per the 802.15.4 spec. There is no need, and it is incorrect to
try to do it in mac802154.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: use kfree_skb() instead of dev_kfree_skb()

kfree_skb() indicates failure, which is where this is being used.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: fix memory leaks

kfree_skb() was not getting called in the case of some failures.
This was pointed out by Eric Dumazet.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: add monitor listener to TX datapath

Add monitor receive callback to the TX datapath to catch all the
data sent to transceivers.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: add missed braces

Add missed braces after 'if' operator.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154: TX data path

Main TX data path implementation between upper and physical layers.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>