#
ec67d6e0 |
|
05-Feb-2024 |
Aditya Kumar Singh <quic_adisi@quicinc.com> |
wifi: mac80211: flush only stations using requests links Whenever sta_flush() function is invoked, all STAs present in that interface are flushed. In case of MLO, it is desirable to only flush such STAs that are at least using a given link id as one of their links. Add support for this by making change in the __sta_info_flush API argument to accept a link ID. And then, only if the STA is using the given link as one of its links, it would be flushed. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240205162952.1697646-3-quic_adisi@quicinc.com [reword commit message, in particular this isn't about "active" links] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
6092077a |
|
29-Jan-2024 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: introduce 'channel request' For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
5add321c |
|
28-Aug-2023 |
Johannes Berg <johannes.berg@intel.com> |
wifi: cfg80211: remove scan_width support There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
076fc877 |
|
28-Aug-2023 |
Johannes Berg <johannes.berg@intel.com> |
wifi: cfg80211: remove wdev mutex Since we're now protecting everything with the wiphy mutex (and were really using it for almost everything before), there's no longer any real reason to have a separate wdev mutex. It may feel better, but really has no value. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
0cd8080e |
|
28-Aug-2023 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: remove local->mtx We now hold the wiphy mutex everywhere that we use or needed the local->mtx, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
16114496 |
|
06-Jun-2023 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: use wiphy work for sdata->work We'll need this later to convert other works that might be cancelled from here, so convert this one first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
15ddba5f |
|
03-Jun-2023 |
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> |
wifi: mac80211: consistently use u64 for BSS changes Currently, enum ieee80211_bss_change has more than 32 flags. Change the type of the corresponding variables from u32 to u64. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.10354a05eaf1.If19359262fe2728dd523ea6d7c3aa7dc50940411@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
f36fe0a2 |
|
14-Jul-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: fix up link station creation/insertion When we create a station with a non-default link, then we should have a link address, and we definitely need to insert it into the link hash table on insertion. Split the API into with and without link creation and if it has a link, insert the link into the link hash table on sta_info_insert(). Fixes: ba6ddab94fc6 ("wifi: mac80211: maintain link-sta hash table") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
39eac2de |
|
12-Jul-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: move IEEE80211_SDATA_OPERATING_GMODE to link The flag here is currently per interface, but the way we set and clear it means it should be per link, so change it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
d8675a63 |
|
17-Jun-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: RCU-ify link/link_conf pointers Since links can be added and removed dynamically, we need to somehow protect the sdata->link[] and vif->link_conf[] array pointers from disappearing when accessing them without locks. RCU-ify the pointers to achieve this, which requires quite a bit of rework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
cb71f1d1 |
|
31-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: add sta link addition/removal Add the necessary infrastructure, including a new driver method, to add/remove links to/from a station. To do this, refactor the link alloc/free a bit, splitting that so we can do it without linking them, to handle failures better. Note that a station entry must be created representing an MLD or a non-MLD STA, it cannot change between the two. When representing an MLD, the 'deflink' is used for the first link, which might be removed later, in which case the memory isn't reused. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
b4f85443 |
|
30-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: make channel context code MLO-aware Make the channel context code MLO aware, along with some functions that it uses, so that the chan.c file is now MLD-clean and no longer uses deflink/bss_conf/etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
bfd8403a |
|
16-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: reorg some iface data structs for MLD Start reorganizing interface related data structures toward MLD. The most complex part here is for the keys, since we have to split the various kinds of GTKs off to the link but still need to use (for WEP) the other keys as a fallback even for multicast frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
d0a9123e |
|
10-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: move some future per-link data to bss_conf To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
046d2e7c |
|
04-Apr-2022 |
Sriram R <quic_srirrama@quicinc.com> |
mac80211: prepare sta handling for MLO support Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
d2912cb1 |
|
04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
34f11cd3 |
|
16-Oct-2017 |
Kees Cook <keescook@chromium.org> |
mac80211: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
2df8bfd7 |
|
31-Mar-2016 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: remove rx_stats.last_rx update after sta alloc There's no need to update rx_stats.last_rx after allocating a station since it's already updated during allocation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
e5a9f8d0 |
|
16-Oct-2015 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: move station statistics into sub-structs Group station statistics by where they're (mostly) updated (TX, RX and TX-status) and group them into sub-structs of the struct sta_info. Also rename the variables since the grouping now makes it obvious where they belong. This makes it easier to identify where the statistics are updated in the code, and thus easier to think about them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
4b819f6c |
|
05-Aug-2015 |
Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be> |
mac80211: Make OCB mode set BSSID Perform the BSS_CHANGED_BSSID action when joining an OCB network. This is required to set the broadcast BSSID in some network drivers. Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
239281f8 |
|
03-Nov-2014 |
Rostislav Lisovy <lisovy@gmail.com> |
mac80211: 802.11p OCB mode support This patch adds 802.11p OCB (Outside the Context of a BSS) mode support. When communicating in OCB mode a mandatory wildcard BSSID (48 '1' bits) is used. The EDCA parameters handling function was changed to support 802.11p specific values. The insertion of a newly discovered STAs is done in the similar way as in the IBSS mode -- through the deferred insertion. The OCB mode uses a periodic 'housekeeping task' for expiration of disconnected STAs (in the similar manner as in the MESH mode). New Kconfig option for verbose OCB debugging outputs is added. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|