netfilter: use actual socket sk for REJECT action

True to the message of commit v5.10-rc1-105-g46d6c5ae953c, _do_
actually make use of state->sk when possible, such as in the REJECT
modules.

Reported-by: Minqiang Chen <ptpt52@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: use pr ratelimiting in all remaining spots

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: x_tables: move hook state into xt_action_param structure

Place pointer to hook state in xt_action_param structure instead of
copying the fields that we need. After this change xt_action_param fits
into one cacheline.

This patch also adds a set of new wrapper functions to fetch relevant
hook state structure fields.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: x_tables: Use par->net instead of computing from the passed net devices

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6t_REJECT: added missing icmpv6 codes

RFC 4443 added two new codes values for ICMPv6 type 1:

5 - Source address failed ingress/egress policy
6 - Reject route to destination

And RFC 7084 states in L-14 that IPv6 Router MUST send ICMPv6 Destination
Unreachable with code 5 for packets forwarded to it that use an address
from a prefix that has been invalidated.

Codes 5 and 6 are more informative subsets of code 1.

Signed-off-by: Andreas Herz <andi@geekosphere.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6t_REJECT: Remove debug messages from reject_tg6()

Make it similar to reject_tg() in ipt_REJECT.

Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6t_REJECT: check for IP6T_F_PROTO

Make sure IP6T_F_PROTO is set to enforce layer 4 protocol matching from
the ip6_tables core.

Suggested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: REJECT: separate reusable code

This patch prepares the addition of TCP reset support in
the nft_reject module by moving reusable code into a header
file.

Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6t_REJECT: skip checksum verification for outgoing ipv6 packets

Don't verify checksum for outgoing packets because checksum calculation
may be done by the device.

Without this patch:
$ ip6tables -I OUTPUT -p tcp --dport 80 -j REJECT --reject-with tcp-reset
$ time telnet ipv6.google.com 80
Trying 2a00:1450:4010:c03::67...
telnet: Unable to connect to remote host: Connection timed out

real 0m7.201s
user 0m0.000s
sys 0m0.000s

With the patch applied:
$ ip6tables -I OUTPUT -p tcp --dport 80 -j REJECT --reject-with tcp-reset
$ time telnet ipv6.google.com 80
Trying 2a00:1450:4010:c03::67...
telnet: Unable to connect to remote host: Connection refused

real 0m0.085s
user 0m0.000s
sys 0m0.000s

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip[6]t_REJECT: tcp-reset using wrong MAC source if bridged

As reported by Casper Gripenberg, in a bridged setup, using ip[6]t_REJECT
with the tcp-reset option sends out reset packets with the src MAC address
of the local bridge interface, instead of the MAC address of the intended
destination. This causes some routers/firewalls to drop the reset packet
as it appears to be spoofed. Fix this by bypassing ip[6]_local_out and
setting the MAC of the sender in the tcp reset packet.

This closes netfilter bugzilla #531.

Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: add my copyright statements

Add copyright statements to all netfilter files which have had significant
changes done by myself in the past.

Some notes:

- nf_conntrack_ecache.c was incorrectly attributed to Rusty and Netfilter
Core Team when it got split out of nf_conntrack_core.c. The copyrights
even state a date which lies six years before it was written. It was
written in 2005 by Harald and myself.

- net/ipv{4,6}/netfilter.c, net/netfitler/nf_queue.c were missing copyright
statements. I've added the copyright statement from net/netfilter/core.c,
where this code originated

- for nf_conntrack_proto_tcp.c I've also added Jozsef, since I didn't want
it to give the wrong impression

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ipv6: Introduce ip6_flow_hdr() to fill version, tclass and flowlabel.

This is not only for readability but also for optimization.
What we do here is to build the 32bit word at the beginning of the ipv6
header (the "ip6_flow" virtual member of struct ip6_hdr in RFC3542) and
we do not need to read the tclass portion of the target buffer.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ip[6]t_REJECT: fix wrong transport header pointer in TCP reset

The problem occurs when iptables constructs the tcp reset packet.
It doesn't initialize the pointer to the tcp header within the skb.
When the skb is passed to the ixgbe driver for transmit, the ixgbe
driver attempts to access the tcp header and crashes.
Currently, other drivers (such as our 1G e1000e or igb drivers) don't
access the tcp header on transmit unless the TSO option is turned on.

<1>BUG: unable to handle kernel NULL pointer dereference at 0000000d
<1>IP: [<d081621c>] ixgbe_xmit_frame_ring+0x8cc/0x2260 [ixgbe]
<4>*pdpt = 0000000085e5d001 *pde = 0000000000000000
<0>Oops: 0000 [#1] SMP
[...]
<4>Pid: 0, comm: swapper Tainted: P 2.6.35.12 #1 Greencity/Thurley
<4>EIP: 0060:[<d081621c>] EFLAGS: 00010246 CPU: 16
<4>EIP is at ixgbe_xmit_frame_ring+0x8cc/0x2260 [ixgbe]
<4>EAX: c7628820 EBX: 00000007 ECX: 00000000 EDX: 00000000
<4>ESI: 00000008 EDI: c6882180 EBP: dfc6b000 ESP: ced95c48
<4> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
<0>Process swapper (pid: 0, ti=ced94000 task=ced73bd0 task.ti=ced94000)
<0>Stack:
<4> cbec7418 c779e0d8 c77cc888 c77cc8a8 0903010a 00000000 c77c0008 00000002
<4><0> cd4997c0 00000010 dfc6b000 00000000 d0d176c9 c77cc8d8 c6882180 cbec7318
<4><0> 00000004 00000004 cbec7230 cbec7110 00000000 cbec70c0 c779e000 00000002
<0>Call Trace:
<4> [<d0d176c9>] ? 0xd0d176c9
<4> [<d0d18a4d>] ? 0xd0d18a4d
<4> [<411e243e>] ? dev_hard_start_xmit+0x218/0x2d7
<4> [<411f03d7>] ? sch_direct_xmit+0x4b/0x114
<4> [<411f056a>] ? __qdisc_run+0xca/0xe0
<4> [<411e28b0>] ? dev_queue_xmit+0x2d1/0x3d0
<4> [<411e8120>] ? neigh_resolve_output+0x1c5/0x20f
<4> [<411e94a1>] ? neigh_update+0x29c/0x330
<4> [<4121cf29>] ? arp_process+0x49c/0x4cd
<4> [<411f80c9>] ? nf_hook_slow+0x3f/0xac
<4> [<4121ca8d>] ? arp_process+0x0/0x4cd
<4> [<4121ca8d>] ? arp_process+0x0/0x4cd
<4> [<4121c6d5>] ? T.901+0x38/0x3b
<4> [<4121c918>] ? arp_rcv+0xa3/0xb4
<4> [<4121ca8d>] ? arp_process+0x0/0x4cd
<4> [<411e1173>] ? __netif_receive_skb+0x32b/0x346
<4> [<411e19e1>] ? netif_receive_skb+0x5a/0x5f
<4> [<411e1ea9>] ? napi_skb_finish+0x1b/0x30
<4> [<d0816eb4>] ? ixgbe_xmit_frame_ring+0x1564/0x2260 [ixgbe]
<4> [<41013468>] ? lapic_next_event+0x13/0x16
<4> [<410429b2>] ? clockevents_program_event+0xd2/0xe4
<4> [<411e1b03>] ? net_rx_action+0x55/0x127
<4> [<4102da1a>] ? __do_softirq+0x77/0xeb
<4> [<4102dab1>] ? do_softirq+0x23/0x27
<4> [<41003a67>] ? do_IRQ+0x7d/0x8e
<4> [<41002a69>] ? common_interrupt+0x29/0x30
<4> [<41007bcf>] ? mwait_idle+0x48/0x4d
<4> [<4100193b>] ? cpu_idle+0x37/0x4c
<0>Code: df 09 d7 0f 94 c2 0f b6 d2 e9 e7 fb ff ff 31 db 31 c0 e9 38
ff ff ff 80 78 06 06 0f 85 3e fb ff ff 8b 7c 24 38 8b 8f b8 00 00 00
<0f> b6 51 0d f6 c2 01 0f 85 27 fb ff ff 80 e2 02 75 0d 8b 6c 24
<0>EIP: [<d081621c>] ixgbe_xmit_frame_ring+0x8cc/0x2260 [ixgbe] SS:ESP

Signed-off-by: Mukund Jampala <jbmukund@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: Convert net_ratelimit uses to net_<level>_ratelimited

Standardize the net core ratelimited logging functions.

Coalesce formats, align arguments.
Change a printk then vprintk sequence to use printf extension %pV.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Add fragment reporting to ipv6_skip_exthdr().

While parsing through IPv6 extension headers, fragment headers are
skipped making them invisible to the caller. This reports the
fragment offset of the last header in order to make it possible to
determine whether the packet is fragmented and, if so whether it is
a first or last fragment.

Signed-off-by: Jesse Gross <jesse@nicira.com>

net: remove ipv6_addr_copy()

C assignment can handle struct in6_addr copying.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: IPv6: initialize TOS field in REJECT target module

The IPv6 header is not zeroed out in alloc_skb so we must initialize
it properly unless we want to see IPv6 packets with random TOS fields
floating around. The current implementation resets the flow label
but this could be changed if deemed necessary.

We stumbled upon this issue when trying to apply a mangle rule to
the RST packet generated by the REJECT target module.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: Put fl6_* macros to struct flowi6 and use them again.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Convert to use flowi6 where applicable.

Signed-off-by: David S. Miller <davem@davemloft.net>

net: Make flowi ports AF dependent.

Create two sets of port member accessors, one set prefixed by fl4_*
and the other prefixed by fl6_*

This will let us to create AF optimal flow instances.

It will work because every context in which we access the ports,
we have to be fully aware of which AF the flowi is anyways.

Signed-off-by: David S. Miller <davem@davemloft.net>

net: Put flowi_* prefix on AF independent members of struct flowi

I intend to turn struct flowi into a union of AF specific flowi
structs. There will be a common structure that each variant includes
first, much like struct sock_common.

This is the first step to move in that direction.

Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: Return dst directly from xfrm_lookup()

Instead of on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Use ip6_dst_hoplimit() instead of direct dst_metric() calls.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT

We should release dst if dst->error is set.

Bug introduced in 2.6.14 by commit e104411b82f5c
([XFRM]: Always release dst_entry on error in xfrm_lookup)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>

netfilter: xtables: substitute temporary defines by final name

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>

netfilter: xtables: remove old comments about reentrancy

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

netfilter: xtables: change targets to return error code

Part of the transition of done by this semantic patch:
// <smpl>
@ rule1 @
struct xt_target ops;
identifier check;
@@
ops.checkentry = check;

@@
identifier rule1.check;
@@
check(...) { <...
-return true;
+return 0;
...> }

@@
identifier rule1.check;
@@
check(...) { <...
-return false;
+return -EINVAL;
...> }
// </smpl>

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>

netfilter: xtables: change xt_target.checkentry return type

Restore function signatures from bool to int so that we can report
memory allocation failures or similar using -ENOMEM rather than
always having to pass -EINVAL back.

// <smpl>
@@
type bool;
identifier check, par;
@@
-bool check
+int check
(struct xt_tgchk_param *par) { ... }
// </smpl>

Minus the change it does to xt_ct_find_proto.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>

netfilter: xt extensions: use pr_<level> (2)

Supplement to 1159683ef48469de71dc26f0ee1a9c30d131cf89.

Downgrade the log level to INFO for most checkentry messages as they
are, IMO, just an extra information to the -EINVAL code that is
returned as part of a parameter "constraint violation". Leave errors
to real errors, such as being unable to create a LED trigger.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>

ipv6: drop unused "dev" arg of icmpv6_send()

Dunno, what was the idea, it wasn't used for a long time.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: net/ipv[46]/netfilter: Move && and || to end of previous line

Compile tested only.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>

net: skb->dst accessors

Define three accessors to get/set dst attached to a skb

struct dst_entry *skb_dst(const struct sk_buff *skb)

void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)

void skb_dst_drop(struct sk_buff *skb)
This one should replace occurrences of :
dst_release(skb->dst)
skb->dst = NULL;

Delete skb->dst field

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netns xfrm: lookup in netns

Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns
to flow_cache_lookup() and resolver callback.

Take it from socket or netdevice. Stub DECnet to init_net.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: xtables: move extension arguments into compound structure (5/6)

This patch does this for target extensions' checkentry functions.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

netfilter: xtables: move extension arguments into compound structure (4/6)

This patch does this for target extensions' target functions.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

netfilter: netns: ip6t_REJECT in netns for real

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>

netfilter: x_tables: use NFPROTO_* in extensions

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: annotate xtables targets with const and remove casts

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

net: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][IPV6] route6 - add netns parameter to ip6_route_output

Add an netns parameter to ip6_route_output. That will allow to access
to the right routing table for outgoing traffic.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Update modules' descriptions

Updates the MODULE_DESCRIPTION() tags for all Netfilter modules,
actually describing what the module does and not just
"netfilter XYZ target".

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: consistent and unique symbol names

Give all Netfilter modules consistent and unique symbol names.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Introduce NF_INET_ hook values

The IPv4 and IPv6 hook values are identical, yet some code tries to figure
out the "correct" value by looking at the address family. Introduce NF_INET_*
values for both IPv4 and IPv6. The old values are kept in a #ifndef __KERNEL__
section for userspace compatibility.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Add ip6_local_out

Most callers of the LOCAL_OUT chain will set the IP packet length
before doing so. They also share the same output function dst_output.

This patch creates a new function called ip6_local_out which does all
of that and converts the appropriate users over to it.

Apart from removing duplicate code, it will also help in merging the
IPsec output path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Replace sk_buff ** with sk_buff *

With all the users of the double pointers removed, this patch mops up by
finally replacing all occurances of sk_buff ** in the netfilter API by
sk_buff *.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Make the loopback device per network namespace.

This patch makes loopback_dev per network namespace. Adding
code to create a different loopback device for each network
namespace and adding the code to free a loopback device
when a network namespace exits.

This patch modifies all users the loopback_dev so they
access it as init_net.loopback_dev, keeping all of the
code compiling and working. A later pass will be needed to
update the users to use something other than the initial network
namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Dynamically allocate the loopback device, part 1.

This patch replaces all occurences to the static variable
loopback_dev to a pointer loopback_dev. That provides the
mindless, trivial, uninteressting change part for the dynamic
allocation for the loopback.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-By: Kirill Korotaev <dev@sw.ru>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Convert DEBUGP to pr_debug

Convert DEBUGP to pr_debug and fix lots of non-compiling debug statements.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: mark matches and targets __read_mostly

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Remove redundant parentheses/braces

Removes redundant parentheses and braces (And add one pair in a
xt_tcpudp.c macro).

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: add some consts, remove some casts

Make a number of variables const and/or remove unneeded casts.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: switch xt_target->checkentry to bool

Switch the return type of target checkentry functions to boolean.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h

Now the skb->nh union has just one member, .raw, i.e. it is just like the
skb->mac union, strange, no? I'm just leaving it like that till the transport
layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or
->mac_header_offset?), ditto for ->{h,nh}.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF] ipv6: More skb_reset_network_header conversions related to skb_pull

Now related to this form:

skb->nh.ipv6h = (struct ipv6hdr *)skb_put(skb, length);

That, as the others, is done when skb->tail is still equal to skb->data, making
the conversion to skb_reset_network_header possible.

Also one more case equivalent to skb->nh.raw = skb->data, of this form:

iph = (struct ipv6hdr *)skb->data;
<SNIP>
skb->nh.ipv6h = iph;

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET] IPV6: Fix whitespace errors.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: {ip,ip6}_tables: remove x_tables wrapper functions

Use the x_tables functions directly to make it better visible which
parts are shared between ip_tables and ip6_tables.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: remove unused size argument to check/destroy functions

The size is verified by x_tables and isn't needed by the modules anymore.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: remove unused argument to target functions

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: make use of mass registation helpers

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[MLSXFRM]: Add flow labeling

This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.

The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.

ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove obsolete #include <linux/config.h>

Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

[NETFILTER]: Rename init functions.

Every netfilter module uses `init' for its module_init() function and
`fini' or `cleanup' for its module_exit() function.

Problem is, this creates uninformative initcall_debug output and makes
ctags rather useless.

So go through and rename them all to $(filename)_init and
$(filename)_fini.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: x_tables: add xt_{match,target} arguments to match/target functions

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Convert ip6_tables matches/targets to centralized error checking

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack: attach conntrack to TCP RST generated by ip6t_REJECT

TCP RSTs generated by the REJECT target should be associated with the
conntrack of the original TCP packet. Since the conntrack entry is
usually not is the hash tables, it must be manually attached.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables

This monster-patch tries to do the best job for unifying the data
structures and backend interfaces for the three evil clones ip_tables,
ip6_tables and arp_tables. In an ideal world we would never have
allowed this kind of copy+paste programming... but well, our world
isn't (yet?) ideal.

o introduce a new x_tables module
o {ip,arp,ip6}_tables depend on this x_tables module
o registration functions for tables, matches and targets are only
wrappers around x_tables provided functions
o all matches/targets that are used from ip_tables and ip6_tables
are now implemented as xt_FOOBAR.c files and provide module aliases
to ipt_FOOBAR and ip6t_FOOBAR
o header files for xt_matches are in include/linux/netfilter/,
include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers
around the xt_FOOBAR.h headers

Based on this patchset we're going to further unify the code,
gradually getting rid of all the layer 3 specific assumptions.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Always release dst_entry on error in xfrm_lookup

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Add IPv6 REJECT target

Originally written by Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>,
taken from netfilter patch-o-matic and fixed up to work with current
kernels.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>