net: esp: fix bad handling of pages from page_pool

When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.

This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:

BUG: Bad page state in process ksoftirqd/16 pfn:1451b6
page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
flags: 0x200000000000000(node=0|zone=2)
page_type: 0xffffffff()
raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x27a/0x460
free_unref_page+0x38/0x120
esp_ssg_unref.isra.0+0x15f/0x200
esp_output_tail+0x66d/0x780
esp_xmit+0x2c5/0x360
validate_xmit_xfrm+0x313/0x370
? validate_xmit_skb+0x1d/0x330
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x23e/0x350
__dev_queue_xmit+0x337/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x25e/0x580
iptunnel_xmit+0x19b/0x240
ip_tunnel_xmit+0x5fb/0xb60
ipgre_xmit+0x14d/0x280 [ip_gre]
dev_hard_start_xmit+0xc3/0x1c0
__dev_queue_xmit+0x208/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x1ca/0x580
ip_sublist_rcv_finish+0x32/0x40
ip_sublist_rcv+0x1b2/0x1f0
? ip_rcv_finish_core.constprop.0+0x460/0x460
ip_list_rcv+0x103/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x1b3/0x2c0
napi_gro_receive+0xc8/0x200
gro_cell_poll+0x52/0x90
__napi_poll+0x25/0x1a0
net_rx_action+0x28e/0x300
__do_softirq+0xc3/0x276
? sort_range+0x20/0x20
run_ksoftirqd+0x1e/0x30
smpboot_thread_fn+0xa6/0x130
kthread+0xcd/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x31/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>

The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.

Cc: stable@vger.kernel.org
Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-and-tested-by: Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz>
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: fill in MODULE_DESCRIPTION()s for ipv6 modules

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv6 modules.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-6-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipv6: fix typo in comments

The word "advertize" should be replaced by "advertise".

Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv6: fix return value check in esp_remove_trailer

In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().

Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: ipv6: Remove completion function scaffolding

This patch removes the temporary scaffolding now that the comletion
function signature has been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

net: ipv6: Add scaffolding to change completion function signature

This patch adds temporary scaffolding so that the Crypto API
completion function can take a void * instead of crypto_async_request.
Once affected users have been converted this can be removed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

xfrm: esp: add extack to esp_init_state, esp6_init_state

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: pass extack down to xfrm_type ->init_state

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

tcp: Access &tcp_hashinfo via net.

We will soon introduce an optional per-netns ehash.

This means we cannot use tcp_hashinfo directly in most places.

Instead, access it via net->ipv4.tcp_death_row.hashinfo.

The access will be valid only while initialising tcp_hashinfo
itself and creating/destroying each netns.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

esp6: Fix spelling mistake

Change 'accomodate' to 'accommodate'.

Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: free not used XFRM_ESP_NO_TRAILER flag

After removal of Innova IPsec support from mlx5 driver, the last user
of this XFRM_ESP_NO_TRAILER was gone too. This means that we can safely
remove it as no other hardware is capable (or need) to remove ESP trailer.

Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: limit skb_page_frag_refill use to a single page

Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.

This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: fix check on ipv6_skip_exthdr's return value

Commit 5f9c55c8066b ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:

IPv6 | ext | ... | ext | UDP | ESP | ...

That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.

In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).

Fixes: 5f9c55c8066b ("ipv6: check return value of ipv6_skip_exthdr")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Fix possible buffer overflow in ESP transformation

The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.

Fix this by doing a fallback to COW in that case.

v2:

Avoid get get_order() costs as suggested by Linus Torvalds.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Revert "xfrm: xfrm_state_mtu should return at least 1280 for ipv6"

This reverts commit b515d2637276a3810d6595e10ab02c13bfd0b63a.

Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.

The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header

However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header

With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.

The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/

The original problem the above commit was trying to fix is now fixed
by commit 6596a0229541270fb8d38d989f91b78838e5e9da ("xfrm: fix MTU
regression").

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipv6/esp6: Remove structure variables and alignment statements

The definition of this variable is just to find the length of the
structure after aligning the structure. The PTR alignment function
is to optimize the size of the structure. In fact, it doesn't seem
to be of much use, because both members of the structure are of
type u32.
So I think that the definition of the variable and the
corresponding alignment can be deleted, the value of extralen can
be directly passed in the size of the structure.

The clang_analyzer complains as follows:

net/ipv6/esp6.c:117:27 warning:

Value stored to 'extra' during its initialization is never read

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipv6: check return value of ipv6_skip_exthdr

The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.

EDIT: added {}'s, thanks Kees

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: remove hdr_offset indirection

After previous patches all remaining users set the function pointer to
the same function: xfrm6_find_1stfragopt.

So remove this function pointer and call ip6_find_1stfragopt directly.

Reduces size of xfrm_type to 64 bytes on 64bit platforms.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: remove description from xfrm_type struct

Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: xfrm_state_mtu should return at least 1280 for ipv6

Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.

We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.

Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.

Fixes: 91657eafb64b ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipv6: fix clang Wformat warning

When building with 'make W=1', clang warns about a mismatched
format string:

net/ipv6/ah6.c:710:4: error: format specifies type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat]
aalg_desc->uinfo.auth.icv_fullbits/8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/printk.h:375:34: note: expanded from macro 'pr_info'
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
net/ipv6/esp6.c:1153:5: error: format specifies type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat]
aalg_desc->uinfo.auth.icv_fullbits / 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/printk.h:375:34: note: expanded from macro 'pr_info'
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~

Here, the result of dividing a 16-bit number by a 32-bit number
produces a 32-bit result, which is printed as a 16-bit integer.

Change the %hu format to the normal %u, which has the same effect
but avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: Use actual socket sk instead of skb socket for xfrm_output_resume

A situation can occur where the interface bound to the sk is different
to the interface bound to the sk attached to the skb. The interface
bound to the sk is the correct one however this information is lost inside
xfrm_output2 and instead the sk on the skb is used in xfrm_output_resume
instead. This assumes that the sk bound interface and the bound interface
attached to the sk within the skb are the same which can lead to lookup
failures inside ip_route_me_harder resulting in the packet being dropped.

We have an l2tp v3 tunnel with ipsec protection. The tunnel is in the
global VRF however we have an encapsulated dot1q tunnel interface that
is within a different VRF. We also have a mangle rule that marks the
packets causing them to be processed inside ip_route_me_harder.

Prior to commit 31c70d5956fc ("l2tp: keep original skb ownership") this
worked fine as the sk attached to the skb was changed from the dot1q
encapsulated interface to the sk for the tunnel which meant the interface
bound to the sk and the interface bound to the skb were identical.
Commit 46d6c5ae953c ("netfilter: use actual socket sk rather than skb sk
when routing harder") fixed some of these issues however a similar
problem existed in the xfrm code.

Fixes: 31c70d5956fc ("l2tp: keep original skb ownership")
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Simplify the calculation of variables

Fix the following coccicheck warnings:

./net/ipv6/esp6.c:791:16-18: WARNING !A || A && B is equivalent
to !A || B.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: avoid unneeded kmap_atomic call

esp(6)_output_head uses skb_page_frag_refill to allocate a buffer for
the esp trailer.

It accesses the page with kmap_atomic to handle highmem. But
skb_page_frag_refill can return compound pages, of which
kmap_atomic only maps the first underlying page.

skb_page_frag_refill does not return highmem, because flag
__GFP_HIGHMEM is not set. ESP uses it in the same manner as TCP.
That also does not call kmap_atomic, but directly uses page_address,
in skb_copy_to_page_nocache. Do the same for ESP.

This issue has become easier to trigger with recent kmap local
debugging feature CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

xfrm: esp6: fix the location of the transport header with encapsulation

commit 17175d1a27c6 ("xfrm: esp6: fix encapsulation header offset
computation") changed esp6_input_done2 to correctly find the size of
the IPv6 header that precedes the TCP/UDP encapsulation header, but
didn't adjust the final call to skb_set_transport_header, which I
assumed was correct in using skb_network_header_len.

Xiumei Mu reported that when we create xfrm states that include port
numbers in the selector, traffic from the user sockets is dropped. It
turns out that we get a state mismatch in __xfrm_policy_check, because
we end up trying to compare the encapsulation header's ports with the
selector that's based on user traffic ports.

Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP")
Fixes: 26333c37fc28 ("xfrm: add IPv6 support for espintcp")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: esp6: fix encapsulation header offset computation

In commit 0146dca70b87, I incorrectly adapted the code that computes
the location of the UDP or TCP encapsulation header from IPv4 to
IPv6. In esp6_input_done2, skb->transport_header points to the ESP
header, so by adding skb_network_header_len, uh and th will point to
the ESP header, not the encapsulation header that's in front of it.

Since the TCP header's size can change with options, we have to start
from the IPv6 header and walk past possible extensions.

Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP")
Fixes: 26333c37fc28 ("xfrm: add IPv6 support for espintcp")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: add IPv6 support for espintcp

This extends espintcp to support IPv6, building on the existing code
and the new UDPv6 encapsulation support. Most of the code is either
reused directly (stream parser, ULP) or very similar to the IPv4
variant (net/ipv6/esp6.c changes).

The separation of config options for IPv4 and IPv6 espintcp requires a
bit of Kconfig gymnastics to enable the core code.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: add support for UDPv6 encapsulation of ESP

This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily add espintcp on IPv6 as a follow-up.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ESP: Export esp_output_fill_trailer function

The esp fill trailer method is identical for both
IPv6 and IPv4.

Share the implementation for esp6 and esp to avoid
code duplication in addition it could be also used
at various drivers code.

Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: remove get_mtu indirection from xfrm_type

esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference
is a single sizeof() (ipv4 vs. ipv6 header).

Merge both into xfrm_state_mtu() and remove the indirection.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: remove type and offload_type map from xfrm_state_afinfo

Only a handful of xfrm_types exist, no need to have 512 pointers for them.

Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms.

Also, the unregister function doesn't need to return an error, no single
caller does anything useful with it.

Just place a WARN_ON() where needed instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

esp: Skip TX bytes accounting when sending from a request socket

On ESP output, sk_wmem_alloc is incremented for the added padding if a
socket is associated to the skb. When replying with TCP SYNACKs over
IPsec, the associated sk is a casted request socket, only. Increasing
sk_wmem_alloc on a request socket results in a write at an arbitrary
struct offset. In the best case, this produces the following WARNING:

WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4]
refcount_t: addition on 0; use-after-free.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2
Hardware name: Marvell Armada 380/385 (Device Tree)
[...]
[<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4])
[<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664)
[<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4)
[<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8)
[<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948)
[<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64)
[<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4)
[<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20)
[<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc)
[<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54)
[<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec)
[<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8)
[<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c)
[...]

The issue triggers only when not using TCP syncookies, as for syncookies
no socket is associated.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: use skb_sec_path helper in more places

skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type

same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

esp: remove redundant define esph

The pointer 'esph' is defined but is never used hence it is redundant
and canbe removed.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: fix memleak on error path in esp6_input

This ought to be an omission in e6194923237 ("esp: Fix memleaks on error
paths."). The memleak on error path in esp6_input is similar to esp_input
of esp4.

Fixes: e6194923237 ("esp: Fix memleaks on error paths.")
Fixes: 3f29770723f ("ipsec: check return value of skb_to_sgvec always")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: Return error on unknown encap_type in init_state

Currently esp will happily create an xfrm state with an unknown
encap type for IPv4, without setting the necessary state parameters.
This patch fixes it by returning -EINVAL.

There is a similar problem in IPv6 where if the mode is unknown
we will skip initialisation while returning zero. However, this
is harmless as the mode has already been checked further up the
stack. This patch removes this anomaly by aligning the IPv6
behaviour with IPv4 and treating unknown modes (which cannot
actually happen) as transport mode.

Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Don't require synchronous crypto fallback on offloading anymore.

We support asynchronous crypto on layer 2 ESP now.
So no need to force synchronous crypto fallback on
offloading anymore.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: Add asynchronous callbacks for xfrm on layer 2.

This patch implements asynchronous crypto callbacks
and a backlog handler that can be used when IPsec
is done at layer 2 in the TX path. It also extends
the skb validate functions so that we can update
the driver transmit return codes based on async
crypto operation or to indicate that we queued the
packet in a backlog queue.

Joint work with: Aviv Heller <avivh@mellanox.com>

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: use -ENOSPC for transient busy indication

Replace -EBUSY with -ENOSPC when handling transient busy
indication in the absence of backlog.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ipv6: esp6: use BUG_ON instead of if condition followed by BUG

Use BUG_ON instead of if condition followed by BUG in esp_remove_trailer.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: remove redundant initialization of esph

The pointer esph is being initialized with a value that is never
read and then being updated. Remove the redundant initialization
and move the declaration and initializtion of esph to the local
code block.

Cleans up clang warning:
net/ipv6/esp6.c:562:21: warning: Value stored to 'esph' during its
initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: Add support for network devices capable of removing the ESP trailer

In conjunction with crypto offload [1], removing the ESP trailer by
hardware can potentially improve the performance by avoiding (1) a
cache miss incurred by reading the nexthdr field and (2) the necessity
to calculate the csum value of the trailer in order to keep skb->csum
valid.

This patch introduces the changes to the xfrm stack and merely serves
as an infrastructure. Subsequent patch to mlx5 driver will put this to
a good use.

[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Fix skb tailroom calculation

We use skb_availroom to calculate the skb tailroom for the
ESP trailer. skb_availroom calculates the tailroom and
subtracts this value by reserved_tailroom. However
reserved_tailroom is a union with the skb mark. This means
that we subtract the tailroom by the skb mark if set.
Fix this by using skb_tailroom instead.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Fix locking on page fragment allocation

We allocate the page fragment for the ESP trailer inside
a spinlock, but consume it outside of the lock. This
is racy as some other cou could get the same page fragment
then. Fix this by consuming the page fragment inside the
lock too.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: Fix RX checksum after header pull

Both ip6_input_finish (non-GRO) and esp6_gro_receive (GRO) strip
the IPv6 header without adjusting skb->csum accordingly. As a
result CHECKSUM_COMPLETE breaks and "hw csum failure" is written
to the kernel log by netdev_rx_csum_fault (dev.c).

Fix skb->csum by substracting the checksum value of the pulled IPv6
header using a call to skb_postpull_rcsum.

This affects both transport and tunnel modes.

Note that the fix occurs far from the place that the header was
pulled. This is based on existing code, see:
ipv6_srh_rcv() in exthdrs.c and rawv6_rcv() in raw.c

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: Support RX checksum with crypto offload

Keep the device's reported ip_summed indication in case crypto
was offloaded by the device. Subtract the csum values of the
stripped parts (esp header+iv, esp trailer+auth_data) to keep
value correct.

Note: CHECKSUM_COMPLETE should be indicated only if skb->csum
has the post-decryption offload csum value.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Fix memleaks on error paths.

We leak the temporary allocated resources in error paths,
fix this by freeing them.

Fixes: fca11ebde3f ("esp4: Reorganize esp_output")
Fixes: 383d0350f2c ("esp6: Reorganize esp_output")
Fixes: 3f29770723f ("ipsec: check return value of skb_to_sgvec always")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: convert sock.sk_wmem_alloc from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

networking: make skb_push & __skb_push return void pointers

It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)

@@
expression E, SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)

@@
expression SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- fn(SKB, LEN)[0]
+ *(u8 *)fn(SKB, LEN)

Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipsec: check return value of skb_to_sgvec always

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: remove unused variables in esp6

Resolves warnings:
net/ipv6/esp6.c: In function ‘esp_ssg_unref’:
net/ipv6/esp6.c:121:10: warning: variable ‘seqhi’ set but not used [-Wunused-but-set-variable]
net/ipv6/esp6.c: In function ‘esp6_output_head’:
net/ipv6/esp6.c:227:21: warning: variable ‘esph’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Fix misplaced spin_unlock_bh.

A recent commit moved esp_alloc_tmp() out of a lock
protected region, but forgot to remove the unlock from
the error path. This patch removes the forgotten unlock.
While at it, remove some unneeded error assignments too.

Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2cc ("esp6: Reorganize esp_output")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Use a synchronous crypto algorithm on offloading.

We need a fallback algorithm for crypto offloading to a NIC.
This is because packets can be rerouted to other NICs that
don't support crypto offloading. The fallback is going to be
implemented at layer2 where we know the final output device
but can't handle asynchronous returns fron the crypto layer.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Add gso handlers for esp4 and esp6

This patch extends the xfrm_type by an encap function pointer
and implements esp4_gso_encap and esp6_gso_encap. These functions
doing the basic esp encapsulation for a GSO packet. In case the
GSO packet needs to be segmented in software, we add gso_segment
functions. This codepath is going to be used on esp hardware
offloads.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: Reorganize esp_output

We need a fallback for ESP at layer 2, so split esp6_output
into generic functions that can be used at layer 3 and layer 2
and use them in esp_output. We also add esp6_xmit which is
used for the layer 2 fallback.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: Remame esp_input_done2

We are going to export the ipv4 and the ipv6
version of esp_input_done2. They are not static
anymore and can't have the same name. So rename
the ipv6 version to esp6_input_done2.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm: Add an IPsec hardware offloading API

This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.

Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>

Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp: Introduce a helper to setup the trailer

We need to setup the trailer in two different cases,
so add a helper to avoid code duplication.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: Avoid skb_cow_data whenever possible

This patch tries to avoid skb_cow_data on esp6.

On the encrypt side we add the IPsec tailbits
to the linear part of the buffer if there is
space on it. If there is no space on the linear
part, we add a page fragment with the tailbits to
the buffer and use separate src and dst scatterlists.

On the decrypt side, we leave the buffer as it is
if it is not cloned.

With this, we can avoid a linearization of the buffer
in most of the cases.

Joint work with:
Sowmini Varadhan <sowmini.varadhan@oracle.com>
Ilan Tayari <ilant@mellanox.com>

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

esp6: Fix integrity verification when ESN are used

When handling inbound packets, the two halves of the sequence number
stored on the skb are already in network order.

Fixes: 000ae7b2690e ("esp6: Switch to new AEAD interface")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: inet: Support UID-based routing in IP protocols.

- Use the UID in routing lookups made by protocol connect() and
sendmsg() functions.
- Make sure that routing lookups triggered by incoming packets
(e.g., Path MTU discovery) take the UID of the socket into
account.
- For packets not associated with a userspace socket, (e.g., ping
replies) use UID 0 inside the user namespace corresponding to
the network namespace the socket belongs to. This allows
all namespaces to apply routing and iptables rules to
kernel-originated traffic in that namespaces by matching UID 0.
This is better than using the UID of the kernel socket that is
sending the traffic, because the UID of kernel sockets created
at namespace creation time (e.g., the per-processor ICMP and
TCP sockets) is the UID of the user that created the socket,
which might not be mapped in the namespace.

Tested: compiles allnoconfig, allyesconfig, allmodconfig
Tested: https://android-review.googlesource.com/253302
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

esp6: Switch to new AEAD interface

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text. The
IV generation is also now carried out through normal AEAD methods.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

esp6: Use high-order sequence number bits for IV generation

I noticed we were only using the low-order bits for IV generation
when ESN is enabled. This is very bad because it means that the
IV can repeat. We must use the full 64 bits.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipv6: coding style: comparison for equality with NULL

The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x == NULL and sometimes as !x. !x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: coding style improvements (remove assignment in if statements)

This change has no functional impact and simply addresses some coding
style issues detected by checkpatch. Specifically this change
adjusts "if" statements which also include the assignment of a
variable.

No changes to the resultant object files result as determined by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Convert LIMIT_NETDEBUG to net_dbg_ratelimited

Use the more common dynamic_debug capable net_dbg_ratelimited
and remove the LIMIT_NETDEBUG macro.

All messages are still ratelimited.

Some KERN_<LEVEL> uses are changed to KERN_DEBUG.

This may have some negative impact on messages that were
emitted at KERN_INFO that are not not enabled at all unless
DEBUG is defined or dynamic_debug is enabled. Even so,
these messages are now _not_ emitted by default.

This also eliminates the use of the net_msg_warn sysctl
"/proc/sys/net/core/warnings". For backward compatibility,
the sysctl is not removed, but it has no function. The extern
declaration of net_msg_warn is removed from sock.h and made
static in net/core/sysctl_net_core.c

Miscellanea:

o Update the sysctl documentation
o Remove the embedded uses of pr_fmt
o Coalesce format fragments
o Realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: esp: Convert NETDEBUG to pr_info

Commit 64ce207306de ("[NET]: Make NETDEBUG pure printk wrappers")
originally had these NETDEBUG printks as always emitting.

Commit a2a316fd068c ("[NET]: Replace CONFIG_NET_DEBUG with sysctl")
added a net_msg_warn sysctl to these NETDEBUG uses.

Convert these NETDEBUG uses to normal pr_info calls.

This changes the output prefix from "ESP: " to include
"IPSec: " for the ipv4 case and "IPv6: " for the ipv6 case.

These output lines are now like the other messages in the files.

Other miscellanea:

Neaten the arithmetic spacing to be consistent with other
arithmetic spacing in the files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: White-space cleansing : Structure layouts

This patch makes no changes to the logic of the code but simply addresses
coding style issues as detected by checkpatch.

Both objdump and diff -w show no differences.

This patch addresses structure definitions, specifically it cleanses the brace
placement and replaces spaces with tabs in a few places.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: White-space cleansing : Line Layouts

This patch makes no changes to the logic of the code but simply addresses
coding style issues as detected by checkpatch.

Both objdump and diff -w show no differences.

A number of items are addressed in this patch:
* Multiple spaces converted to tabs
* Spaces before tabs removed.
* Spaces in pointer typing cleansed (char *)foo etc.
* Remove space after sizeof
* Ensure spacing around comparators such as if statements.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

esp6: Use the IPsec protocol multiplexer API

Switch esp6 to use the new IPsec protocol multiplexer.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipv4/ipv6: Fix FSF address in file headers

Several files refer to an old address for the Free Software Foundation
in the file header comment. Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: esp{4,6}: get rid of struct esp_data

struct esp_data consists of a single pointer, vanishing the need for it
to be a structure. Fold the pointer into 'data' direcly, removing one
level of pointer indirection.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: esp{4,6}: remove padlen from struct esp_data

The padlen member of struct esp_data is always zero. Get rid of it.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipsec: Don't update the pmtu on ICMPV6_DEST_UNREACH

Currently we update the pmtu in the IPsec protocol error handlers
if icmpv6 message type is either ICMPV6_DEST_UNREACH or
ICMPV6_PKT_TOOBIG. Updating the pmtu on ICMPV6_DEST_UNREACH
is wrong in any case, it causes strangely fragmented packets.
Only ICMPV6_PKT_TOOBIG signalizes pmtu discovery, so remove the
ICMPV6_DEST_UNREACH check in the IPsec protocol error handlers.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

ipv6:introduce function to find route for redirect

RFC 4861 says that the IP source address of the Redirect is the
same as the current first-hop router for the specified ICMP
Destination Address, so the gateway should be taken into
consideration when we find the route for redirect.

There was once a check in commit
a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over
all possible rules on receipt of redirect.") and the check
went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9
("ipv6: Use icmpv6_notify() to propagate redirect, instead of
rt6_redirect()").

The bug is only "exploitable" on layer-2 because the source
address of the redirect is checked to be a valid link-local
address but it makes spoofing a lot easier in the same L2
domain nonetheless.

Thanks very much for Hannes's help.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: esp{4,6}: fix potential MTU calculation overflows

Commit 91657eafb ("xfrm: take net hdr len into account for esp payload
size calculation") introduced a possible interger overflow in
esp{4,6}_get_mtu() handlers in case of x->props.mode equals
XFRM_MODE_TUNNEL. Thus, the following expression will overflow

unsigned int net_adj;
...
<case ipv{4,6} XFRM_MODE_TUNNEL>
net_adj = 0;
...
return ((mtu - x->props.header_len - crypto_aead_authsize(esp->aead) -
net_adj) & ~(align - 1)) + (net_adj - 2);

where (net_adj - 2) would be evaluated as <foo> + (0 - 2) in an unsigned
context. Fix it by simply removing brackets as those operations here
do not need to have special precedence.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Benjamin Poirier <bpoirier@suse.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

ah6/esp6: set transport header correctly for IPsec tunnel mode.

IPsec tunnel does not set ECN field to CE in inner header when
the ECN field in the outer header is CE, and the ECN field in
the inner header is ECT(0) or ECT(1).

The cause is ipip6_hdr() does not return the correct address of
inner header since skb->transport-header is not the inner header
after esp6_input_done2(), or ah6_input().

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: ipv6: fix error return code

Initialize return variable before exiting on an error path.

The initial initialization of the return variable is also dropped, because
that value is never used.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Add redirect support to all protocol icmp error handlers.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Handle PMTU in ICMP error handlers.

One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts
to handle the error pass the 32-bit info cookie in network byte order
whereas ipv4 passes it around in host byte order.

Like the ipv4 side, we have two helper functions. One for when we
have a socket context and one for when we do not.

ip6ip6 tunnels are not handled here, because they handle PMTU events
by essentially relaying another ICMP packet-too-big message back to
the original sender.

This patch allows us to get rid of rt6_do_pmtu_disc(). It handles all
kinds of situations that simply cannot happen when we do the PMTU
update directly using a fully resolved route.

In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very
likely be removed or changed into a BUG_ON() check. We should never
have a prefixed ipv6 route when we get there.

Another piece of strange history here is that TCP and DCCP, unlike in
ipv4, never invoke the update_pmtu() method from their ICMP error
handlers. This is incredibly astonishing since this is the context
where we have the most accurate context in which to make a PMTU
update, namely we have a fully connected socket and associated cached
socket route.

Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: take net hdr len into account for esp payload size calculation

Corrects the function that determines the esp payload size. The calculations
done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for
certain mtu values and suboptimal frames for others.

According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(),
net_header_len must be taken into account before doing the alignment
calculation.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug

Use the current debugging style and enable dynamic_debug.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv6: Standardize prefixes for message logging

Add #define pr_fmt(fmt) as appropriate.

Add "IPv6: " to appropriate files.

Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG).
Standardize on "%s: " not "%s(): " when emitting __func__.
Use "%s: ", __func__ instead of embedding function name.
Coalesce formats, align arguments.

ADDRCONF output is now prefixed with "IPv6: "

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

esp6: Fix scatterlist initialization

When we use IPsec extended sequence numbers, we may overwrite
the last scatterlist of the associated data by the scatterlist
for the skb. This patch fixes this by placing the scatterlist
for the skb right behind the last scatterlist of the associated
data. esp4 does it already like that.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: constify ip headers and in6_addr

Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

esp6: Add support for IPsec extended sequence numbers

This patch adds IPsec extended sequence numbers support to esp6.
We use the authencesn crypto algorithm to handle esp with separate
encryption/authentication algorithms.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: Use separate low and high order bits of the sequence numbers in xfrm_skb_cb

To support IPsec extended sequence numbers, we split the
output sequence numbers of xfrm_skb_cb in low and high order 32 bits
and we add the high order 32 bits to the input sequence numbers.
All users are updated accordingly.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: Traffic Flow Confidentiality for IPv6 ESP

Add TFC padding to all packets smaller than the boundary configured
on the xfrm state. If the boundary is larger than the PMTU, limit
padding to the PMTU.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: SA lookups signature with mark

pass mark to all SA lookups to prepare them for when we add code
to have them search.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm: Use the user specified truncation length in ESP and AH

Instead of using the hardcoded truncation for authentication
algorithms, use the truncation length specified on xfrm_state.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: constify struct inet6_protocol

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Use correct data types for ICMPv6 type and code

Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netns xfrm: AH/ESP in netns!

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netns xfrm: state lookup in netns

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: replace %p6 with %pI6

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: replace uses of NIP6_FMT with %p6

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipsec: Interfamily IPSec BEET, ipv4-inner ipv6-outer

Here's a revised version, based on Herbert's comments, of a fix for
the ipv4-inner, ipv6-outer interfamily ipsec beet mode. It fixes the
network header adjustment during interfamily, as well as makes sure
that we reserve enough room for the new ipv6 header if we might have
something else as the inner family. Also, the ipv4 pseudo header
construction was added.

Signed-off-by: Joakim Koskela <jookos@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ESP]: Ensure IV is in linear part of the skb to avoid BUG() due to OOB access

ESP does not account for the IV size when calling pskb_may_pull() to
ensure everything it accesses directly is within the linear part of a
potential fragment. This results in a BUG() being triggered when the
both the IPv4 and IPv6 ESP stack is fed with an skb where the first
fragment ends between the end of the esp header and the end of the IV.

This bug was found by Dirk Nehring <dnehring@gmx.net> .

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Fix bogus usage of u64 on input sequence number

Al Viro spotted a bogus use of u64 on the input sequence number which
is big-endian. This patch fixes it by giving the input sequence number
its own member in the xfrm_skb_cb structure.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: constify 'struct xfrm_type'

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Add support for combined mode algorithms

This patch adds support for combined mode algorithms with GCM being
the first algorithm supported.

Combined mode algorithms can be added through the xfrm_user interface
using the new algorithm payload type XFRMA_ALG_AEAD. Each algorithms
is identified by its name and the ICV length.

For the purposes of matching algorithms in xfrm_tmpl structures,
combined mode algorithms occupy the same name space as encryption
algorithms. This is in line with how they are negotiated using IKE.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Use crypto_aead and authenc in ESP

This patch converts ESP to use the crypto_aead interface and in particular
the authenc algorithm. This lays the foundations for future support of
combined mode algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Move all calls to xfrm_audit_state_icvfail to xfrm_input

Let's nip the code duplication in the bud :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: RFC4303 compliant auditing

This patch adds a number of new IPsec audit events to meet the auditing
requirements of RFC4303. This includes audit hooks for the following events:

* Could not find a valid SA [sections 2.1, 3.4.2]
. xfrm_audit_state_notfound()
. xfrm_audit_state_notfound_simple()

* Sequence number overflow [section 3.3.3]
. xfrm_audit_state_replay_overflow()

* Replayed packet [section 3.4.3]
. xfrm_audit_state_replay()

* Integrity check failure [sections 3.4.4.1, 3.4.4.2]
. xfrm_audit_state_icvfail()

While RFC4304 deals only with ESP most of the changes in this patch apply to
IPsec in general, i.e. both AH and ESP. The one case, integrity check
failure, where ESP specific code had to be modified the same was done to the
AH code for the sake of consistency.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Move state lock into x->type->input

This patch releases the lock on the state before calling
x->type->input. It also adds the lock to the spots where they're
currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Move integrity stat collection into xfrm_input

Similar to the moving out of the replay processing on the output, this
patch moves the integrity stat collectin from x->type->input into
xfrm_input.

This would eventually allow transforms such as AH/ESP to be lockless.

The error value EBADMSG (currently unused in the crypto layer) is used
to indicate a failed integrity check. In future this error can be
directly returned by the crypto layer once we switch to aead
algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPv6] ESP: Discard dummy packets introduced in rfc4303

RFC4303 introduces dummy packets with a nexthdr value of 59
to implement traffic confidentiality. Such packets need to
be dropped silently and the payload may not be attempted to
be parsed as it consists of random chunk.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix incorrect sg_mark_end() calls.

This fixes scatterlist corruptions added by

commit 68e3f5dd4db62619fdbe520d36c9ebf62e672256
[CRYPTO] users: Fix up scatterlist conversion errors

The issue is that the code calls sg_mark_end() which clobbers the
sg_page() pointer of the final scatterlist entry.

The first part fo the fix makes skb_to_sgvec() do __sg_mark_end().

After considering all skb_to_sgvec() call sites the most correct
solution is to call __sg_mark_end() in skb_to_sgvec() since that is
what all of the callers would end up doing anyways.

I suspect this might have fixed some problems in virtio_net which is
the sole non-crypto user of skb_to_sgvec().

Other similar sg_mark_end() cases were converted over to
__sg_mark_end() as well.

Arguably sg_mark_end() is a poorly named function because it doesn't
just "mark", it clears out the page pointer as a side effect, which is
what led to these bugs in the first place.

The one remaining plain sg_mark_end() call is in scsi_alloc_sgtable()
and arguably it could be converted to __sg_mark_end() if only so that
we can delete this confusing interface from linux/scatterlist.h

Signed-off-by: David S. Miller <davem@davemloft.net>

[CRYPTO] users: Fix up scatterlist conversion errors

This patch fixes the errors made in the users of the crypto layer during
the sg_init_table conversion. It also adds a few conversions that were
missing altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[INET] ESP: Must #include <linux/scatterlist.h>

This patch fixes the following compile errors in some configurations:

<-- snip -->

...
CC net/ipv4/esp4.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv4/esp4.c: In function 'esp_output':
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv4/esp4.c:113: error: implicit declaration of function 'sg_init_table'
make[3]: *** [net/ipv4/esp4.o] Error 1
...
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv6/esp6.c: In function 'esp6_output':
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv6/esp6.c:112: error: implicit declaration of function 'sg_init_table'
make[3]: *** [net/ipv6/esp6.o] Error 1


<-- snip -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Add missing sg_init_table() calls to ESP.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC] IPV6: Fix to add tunnel mode SA correctly.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP

Combining RO and AH/ESP/IPCOMP does not make sense. So this patch adds a
check in the state initialisation function to prevent this.

This allows us to safely remove the mode input function of RO since it
can never be called anymore. Indeed, if somehow it does get called we'll
know about it through an OOPS instead of it slipping past silently.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Move IP length/checksum setting out of transforms

This patch moves the setting of the IP length and checksum fields out of
the transforms and into the xfrmX_output functions. This would help future
efforts in merging the transforms themselves.

It also adds an optimisation to ipcomp due to the fact that the transport
offset is guaranteed to be zero.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Get rid of ipv6_{auth,esp,comp}_hdr

This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since
they're identical to the IPv4 versions. Duplicating them would only create
problems for ourselves later when we need to add things like extended
sequence numbers.

I've also added transport header type conversion headers for these types
which are now used by the transforms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Set skb->data to payload in x->mode->output

This patch changes the calling convention so that on entry from
x->mode->output and before entry into x->type->output skb->data
will point to the payload instead of the IP header.

This is essentially a redistribution of skb_push/skb_pull calls
with the aim of minimising them on the common path of tunnel +
ESP.

It'll also let us use the same calling convention between IPv4
and IPv6 with the next patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Move state lock into x->type->output

This patch releases the lock on the state before calling x->type->output.
It also adds the lock to the spots where they're currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Store IPv6 nh pointer in mac_header on output

Current the x->mode->output functions store the IPv6 nh pointer in the
skb network header. This is inconvenient because the network header then
has to be fixed up before the packet can leave the IPsec stack. The mac
header field is unused on output so we can use that to store this instead.

This patch does that and removes the network header fix-up in xfrm_output.

It also uses ipv6_hdr where appropriate in the x->type->output functions.

There is also a minor clean-up in esp4 to make it use the same code as
esp6 to help any subsequent effort to merge the two.

Lastly it kills two redundant skb_set_* statements in BEET that were
simply copied over from transport mode.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Move output replay code into xfrm_output

The replay counter is one of only two remaining things in the output code
that requires a lock on the xfrm state (the other being the crypto). This
patch moves it into the generic xfrm_output so we can remove the lock from
the transforms themselves.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC] esp: Remove keys from esp_data structure

The keys are only used during initialisation so we don't need to carry them
in esp_data. Since we don't have to allocate them again, there is no need
to place a limit on the authentication key length anymore.

This patch also kills the unused auth.icv member.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Add module alias for transformation type.

It is clean-up for XFRM type modules and adds aliases with its
protocol:
ESP, AH, IPCOMP, IPIP and IPv6 for IPsec
ROUTING and DSTOPTS for MIPv6

It is almost the same thing as XFRM mode alias, but it is added
new defines XFRM_PROTO_XXX for preprocessing since some protocols
are defined as enum.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: Ingo Oeser <netdev@axxeo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Optimize MTU calculation

Replace the probing based MTU estimation, which usually takes 2-3 iterations
to find a fitting value and may underestimate the MTU, by an exact calculation.

Also fix underestimation of the XFRM trailer_len, which causes unnecessary
reallocations.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: esp: fix skb_tail_pointer conversion bug

Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer
conversion:

- *(u8*)(trailer->tail - 1) = top_iph->protocol;
+ *(skb_tail_pointer(skb) - 1) = top_iph->protocol;

- *(u8 *)(trailer->tail - 1) = *skb_network_header(skb);
+ *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb);

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Convert skb->tail to sk_buff_data_t

So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)

Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce skb_network_header_len

For the common sequence "skb->h.raw - skb->nh.raw", similar to skb->mac_len,
that is precalculated tho, don't think we need to bloat skb with one more
member, so just use this new helper, reducing the number of non-skbuff.h
references to the layer headers even more.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce skb_transport_header(skb)

For the places where we need a pointer to the transport header, it is
still legal to touch skb->h.raw directly if just adding to,
subtracting from or setting it to another layer header.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce skb_set_transport_header

For the cases where the transport header is being set to a offset from
skb->data.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce skb_transport_offset()

For the quite common 'skb->h.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h

Now the skb->nh union has just one member, .raw, i.e. it is just like the
skb->mac union, strange, no? I'm just leaving it like that till the transport
layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or
->mac_header_offset?), ditto for ->{h,nh}.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SK_BUFF]: Introduce skb_network_header()

For the places where we need a pointer to the network header, it is still legal
to touch skb->nh.raw directly if just adding to, subtracting from or setting it
to another layer header.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET] IPV6: Fix whitespace errors.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: 'info' argument of ipv6 ->err_handler() is net-endian

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC] esp: Defer output IV initialization to first use.

First of all, if the xfrm_state only gets used for input
packets this entropy is a complete waste.

Secondly, it is often the case that a configuration loads
many rules (perhaps even dynamically) and they don't all
necessarily ever get used.

This get_random_bytes() call was showing up in the profiles
for xfrm_state inserts which is how I noticed this.

Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM] STATE: Add a hook to find offset to be inserted header in outbound.

On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find
offset to be inserted header in outbound for transport mode. (BTW, no
usage may be needed for IPv4 case.) Mobile IPv6 requires another
logic for routing header and destination options header
respectively. This patch is common platform for the offset and adopts
it to IPsec.

Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Add XFRM_MODE_xxx for future use.

Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv6.
Based on MIPL2 kernel patch.

This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi>

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Use HMAC template and hash interface

This patch converts IPsec to use the new HMAC template. The names of
existing simple digest algorithms may still be used to refer to their
HMAC composites.

The same structure can be used by other MACs such as AES-XCBC-MAC.

This patch also switches from the digest interface to hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC] ESP: Use block ciphers where applicable

This patch converts IPSec/ESP to use the new block cipher type where
applicable. Similar to the HMAC conversion, existing algorithm names
have been kept for compatibility.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove obsolete #include <linux/config.h>

Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

[IPSEC] proto: Move transport mode input path into xfrm_mode_transport

Now that we have xfrm_mode objects we can move the transport mode specific
input decapsulation code into xfrm_mode_transport. This removes duplicate
code as well as unnecessary header movement in case of tunnel mode SAs
since we will discard the original IP header immediately.

This also fixes a minor bug for transport-mode ESP where the IP payload
length is set to the correct value minus the header length (with extension
headers for IPv6).

Of course the other neat thing is that we no longer have to allocate
temporary buffers to hold the IP headers for ESP and IPComp.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Kill unused decap state argument

This patch removes the decap_state argument from the xfrm input hook.
Previously this function allowed the input hook to share state with
the post_input hook. The latter has since been removed.

The only purpose for it now is to check the encap type. However, it
is easier and better to move the encap type check to the generic
xfrm_rcv function. This allows us to get rid of the decap state
argument altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Nearly complete kzalloc cleanup for net/ipv6

Stupidly use kzalloc() instead of kmalloc()/memset()
everywhere where this is possible in net/ipv6/*.c .

Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Sync series - fast path

Fast path sequence updates that will generate ipsec async
events

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Use NIP6_FMT in kernel.h

There are errors and inconsistency in the display of NIP6 strings.
ie: net/ipv6/ip6_flowlabel.c

There are errors and inconsistency in the display of NIPQUAD strings too.
ie: net/netfilter/nf_conntrack_ftp.c

This patch:
adds NIP6_FMT to kernel.h
changes all code to use NIP6_FMT
fixes net/ipv6/ip6_flowlabel.c
adds NIPQUAD_FMT to kernel.h
fixes net/netfilter/nf_conntrack_ftp.c
changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h

To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPv6] IPsec: fix pmtu calculation of esp

It is a simple bug which uses the wrong member.

This bug does not seriously affect ordinary use of IPsec.
But it is important to pass IPv6 ready logo phase-2
conformance test of IPsec SGW.

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC] Fix block size/MTU bugs in ESP

This patch fixes the following bugs in ESP:

* Fix transport mode MTU overestimate. This means that the inner MTU
is smaller than it needs be. Worse yet, given an input MTU which
is a multiple of 4 it will always produce an estimate which is not
a multiple of 4.

For example, given a standard ESP/3DES/MD5 transform and an MTU of
1500, the resulting MTU for transport mode is 1462 when it should
be 1464.

The reason for this is because IP header lengths are always a multiple
of 4 for IPv4 and 8 for IPv6.

* Ensure that the block size is at least 4. This is required by RFC2406
and corresponds to what the esp_output function does. At the moment
this only affects crypto_null as its block size is 1.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Use ALIGN macro in ESP

This patch uses the macro ALIGN in all the applicable spots for ESP.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CRYPTO]: crypto_free_tfm() callers no longer need to check for NULL

Since the patch to add a NULL short-circuit to crypto_free_tfm() went in,
there's no longer any need for callers of that function to check for NULL.
This patch removes the redundant NULL checks and also a few similar checks
for NULL before calls to kfree() that I ran into while doing the
crypto_free_tfm bits.

I've succesfuly compile tested this patch, and a kernel with the patch
applied boots and runs just fine.

When I posted the patch to LKML (and other lists/people on Cc) it drew the
following comments :

J. Bruce Fields commented
"I've no problem with the auth_gss or nfsv4 bits.--b."

Sridhar Samudrala said
"sctp change looks fine."

Herbert Xu signed off on the patch.

So, I guess this is ready to be dropped into -mm and eventually mainline.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Make NETDEBUG pure printk wrappers

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPSEC]: Add xfrm_init_state

This patch adds xfrm_init_state which is simply a wrapper that calls
xfrm_get_type and subsequently x->type->init_state. It also gets rid
of the unused args argument.

Abstracting it out allows us to add common initialisation code, e.g.,
to set family-specific flags.

The add_time setting in xfrm_user.c was deleted because it's already
set by xfrm_state_alloc.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!