devlink: introduce a helper for netlink multicast send

Introduce a helper devlink_nl_notify_send() so each object notification
function does not have to call genlmsg_multicast_netns() with the same
arguments.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

devlink: send notifications only if there are listeners

Introduce devlink_nl_notify_need() helper and using it to check at the
beginning of notification functions to avoid overhead of composing
notification messages in case nobody listens.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

devlink: use devl_is_registered() helper instead xa_get_mark()

Instead of checking the xarray mark directly using xa_get_mark() helper
use devl_is_registered() helper which wraps it up. Note that there are
couple more users of xa_get_mark() left which are going to be handled
by the next patch.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

devlink: warn about existing entities during reload-reinit

During reload-reinit, all entities except for params, resources, regions
and health reporter should be removed and re-added. Add a warning to
be triggered in case the driver behaves differently.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

devlink: Add device lock assert in reload operation

Add an assert to verify that the device lock is always held throughout
reload operations.

Tested the following flows with netdevsim and mlxsw while lockdep is
enabled:

netdevsim:

# echo "10 1" > /sys/bus/netdevsim/new_device
# devlink dev reload netdevsim/netdevsim10
# ip netns add bla
# devlink dev reload netdevsim/netdevsim10 netns bla
# ip netns del bla
# echo 10 > /sys/bus/netdevsim/del_device

mlxsw:

# devlink dev reload pci/0000:01:00.0
# ip netns add bla
# devlink dev reload pci/0000:01:00.0 netns bla
# ip netns del bla
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove
# echo 1 > /sys/bus/pci/rescan

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: rename netlink callback to be aligned with the generated ones

All remaining doit and dumpit netlink callback functions are going to be
used by generated split ops. They expect certain name format. Rename the
callback to be aligned with generated names.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: introduce possibility to expose info about nested devlinks

In mlx5, there is a devlink instance created for PCI device. Also, one
separate devlink instance is created for auxiliary device that
represents the netdev of uplink port. This relation is currently
invisible to the devlink user.

Benefit from the rel infrastructure and allow for nested devlink
instance to set the relationship for the nested-in devlink instance.
Note that there may be many nested instances, therefore use xarray to
hold the list of rel_indexes for individual nested instances.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: introduce object and nested devlink relationship infra

It is a bit tricky to maintain relationship between devlink objects and
nested devlink instances due to following aspects:

1) Locking. It is necessary to lock the devlink instance that contains
the object first, only after that to lock the nested instance.
2) Lifetimes. Objects (e.g devlink port) may be removed before
the nested devlink instance.
3) Notifications. If nested instance changes (e.g. gets
registered/unregistered) the nested-in object needs to send
appropriate notifications.

Resolve this by introducing an xarray that holds 1:1 relationships
between devlink object and related nested devlink instance.
Use that xarray index to get the object/nested devlink instance on
the other side.

Provide necessary helpers:
devlink_rel_nested_in_add/clear() to add and clear the relationship.
devlink_rel_nested_in_notify() to call the nested-in object to send
notifications during nested instance register/unregister/netns
change.
devlink_rel_devlink_handle_put() to be used by nested-in object fill
function to fill the nested handle.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: move devlink_notify_register/unregister() to dev.c

At last, move the last bits out of leftover.c,
the devlink_notify_register/unregister() functions to dev.c

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-16-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: pass flags as an arg of dump_one() callback

In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the
flags as an arg of dump_one() callback. Currently, it is always
NLM_F_MULTI.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: introduce dumpit callbacks for split ops

Introduce dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.

Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: rename doit callbacks for per-instance dump commands

Rename netlink doit callback functions for the commands that do
implement per-instance dump to match the generated names that are going
to be introduce in the follow-up patch.

Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: introduce couple of dumpit callbacks for split ops

Introduce couple of dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: rename couple of doit netlink callbacks to match generated names

The generated names of the doit netlink callback are missing "cmd" in
their names. Change names to be ready to switch to generated split ops
header.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: don't allow to change net namespace for FW_ACTIVATE reload action

The change on network namespace only makes sense during re-init reload
action. For FW activation it is not applicable. So check if user passed
an ATTR indicating network namespace change request and forbid it.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230213115836.3404039-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

devlink: make sure driver does not read updated driverinit param before reload

The driverinit param purpose is to serve the driver during init/reload
time to provide a value, either default or set by user.

Make sure that driver does not read value updated by user before the
reload is performed. Hold the new value in a separate struct and switch
it during reload.

Note that this is required to be eventually possible to call
devl_param_driverinit_value_get() without holding instance lock.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: stop using NL_SET_ERR_MSG_MOD

NL_SET_ERR_MSG_MOD inserts the KBUILD_MODNAME and a ':' before the actual
extended error message. The devlink feature hasn't been able to be compiled
as a module since commit f4b6bcc7002f ("net: devlink: turn devlink into a
built-in").

Stop using NL_SET_ERR_MSG_MOD, and just use the base NL_SET_ERR_MSG. This
aligns the extended error messages better with the NL_SET_ERR_MSG_ATTR
messages as well.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: Move devlink dev selftest code to dev

Move devlink dev selftest callbacks and related code from leftover.c to
file dev.c. No functional change in this patch.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Move devlink_info_req struct to be local

As all users of the struct devlink_info_req are already in dev.c, move
this struct from devl_internal.c to be local in dev.c.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Move devlink dev flash code to dev

Move devlink dev flash callbacks, helpers and other related code from
leftover.c to dev.c. No functional change in this patch.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Move devlink dev info code to dev

Move devlink dev info callbacks, related drivers helpers functions and
other related code from leftover.c to dev.c. No functional change in
this patch.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Move devlink dev eswitch code to dev

Move devlink dev eswitch callbacks and related code from leftover.c to
file dev.c. No functional change in this patch.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Move devlink dev reload code to dev

Move devlink dev reload callback and related code from leftover.c to
file dev.c. No functional change in this patch.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: Split out dev get and dump code

Move devlink dev get and dump callbacks and related dev code to new file
dev.c. This file shall include all callbacks that are specific on
devlink dev object.

No functional change in this patch.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>