crypto: lib - Move mpi into lib/crypto

As lib/mpi is mostly used by crypto code, move it under lib/crypto
so that patches touching it get directed to the right mailing list.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib/aesgcm - Provide minimal library implementation

Implement a minimal library version of AES-GCM based on the existing
library implementations of AES and multiplication in GF(2^128). Using
these primitives, GCM can be implemented in a straight-forward manner.

GCM has a couple of sharp edges, i.e., the amount of input data
processed with the same initialization vector (IV) should be capped to
protect the counter from 32-bit rollover (or carry), and the size of the
authentication tag should be fixed for a given key. [0]

The former concern is addressed trivially, given that the function call
API uses 32-bit signed types for the input lengths. It is still up to
the caller to avoid IV reuse in general, but this is not something we
can police at the implementation level.

As for the latter concern, let's make the authentication tag size part
of the key schedule, and only permit it to be configured as part of the
key expansion routine.

Note that table based AES implementations are susceptible to known
plaintext timing attacks on the encryption key. The AES library already
attempts to mitigate this to some extent, but given that the counter
mode encryption used by GCM operates exclusively on known plaintext by
construction (the IV and therefore the initial counter value are known
to an attacker), let's take some extra care to mitigate this, by calling
the AES library with interrupts disabled.

[0] https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38d.pdf

Link: https://lore.kernel.org/all/c6fb9b25-a4b6-2e4a-2dd1-63adda055a49@amd.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: move gf128mul library into lib/crypto

The gf128mul library does not depend on the crypto API at all, so it can
be moved into lib/crypto. This will allow us to use it in other library
code in a subsequent patch without having to depend on CONFIG_CRYPTO.

While at it, change the Kconfig symbol name to align with other crypto
library implementations. However, the source file name is retained, as
it is reflected in the module .ko filename, and changing this might
break things for users.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib - move __crypto_xor into utils

CRYPTO_LIB_CHACHA depends on CRYPTO for __crypto_xor, defined in
crypto/algapi.c. This is a layering violation because the dependencies
should only go in the other direction (crypto/ => lib/crypto/). Also
the correct dependency would be CRYPTO_ALGAPI, not CRYPTO. Fix this by
moving __crypto_xor into the utils module in lib/crypto/.

Note that CRYPTO_LIB_CHACHA_GENERIC selected XOR_BLOCKS, which is
unrelated and unnecessary. It was perhaps thought that XOR_BLOCKS was
needed for __crypto_xor, but that's not the case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib - create utils module and move __crypto_memneq into it

As requested at
https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move
__crypto_memneq into lib/crypto/ and put it under a new tristate. The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.

The module's main file will be lib/crypto/utils.c. However, leave
memneq.c as its own file because of its nonstandard license.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib - make the sha1 library optional

Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library
is no longer needed unconditionally. Make it possible to build the
Linux kernel without the SHA-1 library by putting it behind a kconfig
option, and selecting this new option from the kconfig options that gate
the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for
kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c.

Unfortunately, since BPF is selected by NET, for now this can only make
a difference for kernels built without networking support.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib - move lib/sha1.c into lib/crypto/

SHA-1 is a crypto algorithm (or at least was intended to be -- it's not
considered secure anymore), so move it out of the top-level library
directory and into lib/crypto/.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sm3,sm4 - move into crypto directory

The lib/crypto libraries live in lib because they are used by various
drivers of the kernel. In contrast, the various helper functions in
crypto are there because they're used exclusively by the crypto API. The
SM3 and SM4 helper functions were erroniously moved into lib/crypto/
instead of crypto/, even though there are no in-kernel users outside of
the crypto API of those functions. This commit moves them into crypto/.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sm3 - create SM3 stand-alone library

Stand-alone implementation of the SM3 algorithm. It is designed
to have as little dependencies as possible. In other cases you
should generally use the hash APIs from include/crypto/hash.h.
Especially when hashing large amounts of data as those APIs may
be hw-accelerated. In the new SM3 stand-alone library,
sm3_transform() has also been optimized, instead of simply using
the code in sm3_generic.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/crypto: blake2s: include as built-in

In preparation for using blake2s in the RNG, we change the way that it
is wired-in to the build system. Instead of using ifdefs to select the
right symbol, we use weak symbols. And because ARM doesn't need the
generic implementation, we make the generic one default only if an arch
library doesn't need it already, and then have arch libraries that do
need it opt-in. So that the arch libraries can remain tristate rather
than bool, we then split the shash part from the glue code.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

crypto: sm4 - create SM4 library based on sm4 generic code

Take the existing small footprint and mostly time invariant C code
and turn it into a SM4 library that can be used for non-performance
critical, casual use of SM4, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits.

Secondly, some codes have been optimized, such as unrolling small
times loop, removing unnecessary memory shifts, exporting sbox, fk,
ck arrays, and basic encryption and decryption functions.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

kbuild: trace functions in subdirectories of lib/

ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)

exists here in sub-directories of lib/ to keep the behavior of
commit 2464a609ded0 ("ftrace: do not trace library functions").

Since that commit, not only the objects in lib/ but also the ones in
the sub-directories are excluded from ftrace (although the commit
description did not explicitly mention this).

However, most of library functions in sub-directories are not so hot.
Re-add them to ftrace.

Going forward, only the objects right under lib/ will be excluded.

Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

kbuild: introduce ccflags-remove-y and asflags-remove-y

CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.

Add ccflags-remove-y and asflags-remove-y to make it easily.

Use ccflags-remove-y to clean up some Makefiles.

The add/remove order works as follows:

[1] KBUILD_CFLAGS specifies compiler flags used globally

[2] ccflags-y adds compiler flags for all objects in the
current Makefile

[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)

[4] CFLAGS_<file> adds compiler flags per file.

[5] CFLAGS_REMOVE_<file> removes compiler flags per file.

Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.

For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o

The same applies to lib/livepatch/Makefile.

Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.

The following are not affected because they have no sub-directories:

arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/

However, lib/ has several sub-directories.

To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:

lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build

I think commit 2464a609ded0 ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.

Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>

crypto: curve25519 - Fix selftest build error

If CRYPTO_CURVE25519 is y, CRYPTO_LIB_CURVE25519_GENERIC will be
y, but CRYPTO_LIB_CURVE25519 may be set to m, this causes build
errors:

lib/crypto/curve25519-selftest.o: In function `curve25519':
curve25519-selftest.c:(.text.unlikely+0xc): undefined reference to `curve25519_arch'
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x17e): undefined reference to `curve25519_base_arch'

This is because the curve25519 self-test code is being controlled
by the GENERIC option rather than the overall CURVE25519 option,
as is the case with blake2s. To recap, the GENERIC and ARCH options
for CURVE25519 are internal only and selected by users such as
the Crypto API, or the externally visible CURVE25519 option which
in turn is selected by wireguard. The self-test is specific to the
the external CURVE25519 option and should not be enabled by the
Crypto API.

This patch fixes this by splitting the GENERIC module from the
CURVE25519 module with the latter now containing just the self-test.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: poly1305 - add new 32 and 64-bit generic versions

These two C implementations from Zinc -- a 32x32 one and a 64x64 one,
depending on the platform -- come from Andrew Moon's public domain
poly1305-donna portable code, modified for usage in the kernel. The
precomputation in the 32-bit version and the use of 64x64 multiplies in
the 64-bit version make these perform better than the code it replaces.
Moon's code is also very widespread and has received many eyeballs of
scrutiny.

There's a bit of interference between the x86 implementation, which
relies on internal details of the old scalar implementation. In the next
commit, the x86 implementation will be replaced with a faster one that
doesn't rely on this, so none of this matters much. But for now, to keep
this passing the tests, we inline the bits of the old implementation
that the x86 implementation relied on. Also, since we now support a
slightly larger key space, via the union, some offsets had to be fixed
up.

Nonce calculation was folded in with the emit function, to take
advantage of 64x64 arithmetic. However, Adiantum appeared to rely on no
nonce handling in emit, so this path was conditionalized. We also
introduced a new struct, poly1305_core_key, to represent the precise
amount of space that particular implementation uses.

Testing with kbench9000, depending on the CPU, the update function for
the 32x32 version has been improved by 4%-7%, and for the 64x64 by
19%-30%. The 32x32 gains are small, but I think there's great value in
having a parallel implementation to the 64x64 one so that the two can be
compared side-by-side as nice stand-alone units.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib/curve25519 - re-add selftests

Somehow these were dropped when Zinc was being integrated, which is
problematic, because testing the library interface for Curve25519 is
important.. This commit simply adds them back and wires them in in the
same way that the blake2s selftests are wired in.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chacha20poly1305 - import construction and selftest from Zinc

This incorporates the chacha20poly1305 from the Zinc library, retaining
the library interface, but replacing the implementation with calls into
the code that already existed in the kernel's crypto API.

Note that this library API does not implement RFC7539 fully, given that
it is limited to 64-bit nonces. (The 96-bit nonce version that was part
of the selftest only has been removed, along with the 96-bit nonce test
vectors that only tested the selftest but not the actual library itself)

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: curve25519 - generic C library implementations

This contains two formally verified C implementations of the Curve25519
scalar multiplication function, one for 32-bit systems, and one for
64-bit systems whose compiler supports efficient 128-bit integer types.
Not only are these implementations formally verified, but they are also
the fastest available C implementations. They have been modified to be
friendly to kernel space and to be generally less horrendous looking,
but still an effort has been made to retain their formally verified
characteristic, and so the C might look slightly unidiomatic.

The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star
The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto

Information: https://cr.yp.to/ecdh.html

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: - move from lib/zinc to lib/crypto
- replace .c #includes with Kconfig based object selection
- drop simd handling and simplify support for per-arch versions ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: blake2s - generic C library implementation and selftest

The C implementation was originally based on Samuel Neves' public
domain reference implementation but has since been heavily modified
for the kernel. We're able to do compile-time optimizations by moving
some scaffolding around the final function into the header file.

Information: https://blake2.net/

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: - move from lib/zinc to lib/crypto
- remove simd handling
- rewrote selftest for better coverage
- use fixed digest length for blake2s_hmac() and rename to
blake2s256_hmac() ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: poly1305 - move core routines into a separate library

Move the core Poly1305 routines shared between the generic Poly1305
shash driver and the Adiantum and NHPoly1305 drivers into a separate
library so that using just this pieces does not pull in the crypto
API pieces of the generic Poly1305 routine.

In a subsequent patch, we will augment this generic library with
init/update/final routines so that Poyl1305 algorithm can be used
directly without the need for using the crypto API's shash abstraction.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chacha - move existing library code into lib/crypto

Currently, our generic ChaCha implementation consists of a permute
function in lib/chacha.c that operates on the 64-byte ChaCha state
directly [and which is always included into the core kernel since it
is used by the /dev/random driver], and the crypto API plumbing to
expose it as a skcipher.

In order to support in-kernel users that need the ChaCha streamcipher
but have no need [or tolerance] for going through the abstractions of
the crypto API, let's expose the streamcipher bits via a library API
as well, in a way that permits the implementation to be superseded by
an architecture specific one if provided.

So move the streamcipher code into a separate module in lib/crypto,
and expose the init() and crypt() routines to users of the library.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: lib - tidy up lib/crypto Kconfig and Makefile

In preparation of introducing a set of crypto library interfaces, tidy
up the Makefile and split off the Kconfig symbols into a separate file.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sha256 - Make lib/crypto/sha256.c suitable for generic use

Before this commit lib/crypto/sha256.c has only been used in the s390 and
x86 purgatory code, make it suitable for generic use:

* Export interesting symbols
* Add -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to
avoid the exports for the purgatory builds
* Add to lib/crypto/Makefile and crypto/Kconfig

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: des - split off DES library from generic DES cipher driver

Another one for the cipher museum: split off DES core processing into
a separate module so other drivers (mostly for crypto accelerators)
can reuse the code without pulling in the generic DES cipher itself.
This will also permit the cipher interface to be made private to the
crypto API itself once we move the only user in the kernel (CIFS) to
this library interface.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aes - create AES library based on the fixed time AES code

Take the existing small footprint and mostly time invariant C code
and turn it into a AES library that can be used for non-performance
critical, casual use of AES, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits (e.g., in hard interrupts taken from kernel
context)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arc4 - refactor arc4 core code into separate library

Refactor the core rc4 handling so we can move most users to a library
interface, permitting us to drop the cipher interface entirely in a
future patch. This is part of an effort to simplify the crypto API
and improve its robustness against incorrect use.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>