jbd2: remove journal_clean_one_cp_list()

journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost
the same, so merge them into journal_shrink_one_cp_list(), remove the
nr_to_scan parameter, always scan and try to free the whole checkpoint
list.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

jbd2: use the correct print format

The print format error was found when using ftrace event:
<...>-1406 [000] .... 23599442.895823: jbd2_end_commit: dev 252,8 transaction -1866216965 sync 0 head -1866217368
<...>-1406 [000] .... 23599442.896299: jbd2_start_commit: dev 252,8 transaction -1866216964 sync 0

Use the correct print format for transaction, head and tid.

Fixes: 879c5e6b7cb4 ('jbd2: convert instrumentation from markers to tracepoints')
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/1665488024-95172-1-git-send-email-cuibixuan@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

fs/jbd2: Fix the documentation of the jbd2_write_superblock() callers

Commit 2a222ca992c3 ("fs: have submit_bh users pass in op and flags
separately") renamed the jbd2_write_superblock() 'write_op' argument into
'write_flags'. Propagate this change to the jbd2_write_superblock()
callers. Additionally, change the type of 'write_flags' into blk_opf_t.

Cc: Mike Christie <michael.christie@oracle.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-57-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

jbd2,ext4: add a shrinker to release checkpointed buffers

Current metadata buffer release logic in bdev_try_to_free_page() have
a lot of use-after-free issues when umount filesystem concurrently, and
it is difficult to fix directly because ext4 is the only user of
s_op->bdev_try_to_free_page callback and we may have to add more special
refcount or lock that is only used by ext4 into the common vfs layer,
which is unacceptable.

One better solution is remove the bdev_try_to_free_page callback, but
the real problem is we cannot easily release journal_head on the
checkpointed buffer, so try_to_free_buffers() cannot release buffers and
page under memory pressure, which is more likely to trigger
out-of-memory. So we cannot remove the callback directly before we find
another way to release journal_head.

This patch introduce a shrinker to free journal_head on the checkpointed
transaction. After the journal_head got freed, try_to_free_buffers()
could free buffer properly.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

jbd2: Provide trace event for handle restarts

Provide trace event for handle restarts to ease debugging.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-24-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: trace when lock_buffer in do_get_write_access takes a long time

While investigating interactivity problems it was clear that processes
sometimes stall for long periods of times if an attempt is made to
lock a buffer which is undergoing writeback. It would stall in
a trace looking something like

[<ffffffff811a39de>] __lock_buffer+0x2e/0x30
[<ffffffff8123a60f>] do_get_write_access+0x43f/0x4b0
[<ffffffff8123a7cb>] jbd2_journal_get_write_access+0x2b/0x50
[<ffffffff81220f79>] __ext4_journal_get_write_access+0x39/0x80
[<ffffffff811f3198>] ext4_reserve_inode_write+0x78/0xa0
[<ffffffff811f3209>] ext4_mark_inode_dirty+0x49/0x220
[<ffffffff811f57d1>] ext4_dirty_inode+0x41/0x60
[<ffffffff8119ac3e>] __mark_inode_dirty+0x4e/0x2d0
[<ffffffff8118b9b9>] update_time+0x79/0xc0
[<ffffffff8118ba98>] file_update_time+0x98/0x100
[<ffffffff81110ffc>] __generic_file_aio_write+0x17c/0x3b0
[<ffffffff811112aa>] generic_file_aio_write+0x7a/0xf0
[<ffffffff811ea853>] ext4_file_write+0x83/0xd0
[<ffffffff81172b23>] do_sync_write+0xa3/0xe0
[<ffffffff811731ae>] vfs_write+0xae/0x180
[<ffffffff8117361d>] sys_write+0x4d/0x90
[<ffffffff8159d62d>] system_call_fastpath+0x1a/0x1f
[<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: add tracepoints which provide per-handle statistics

Handles which stay open a long time are problematic when it comes time
to close down a transaction so it can be committed. These tracepoints
will help us determine which ones are the problematic ones, and to
validate whether changes makes things better or worse.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: track request delay statistics

Track the delay between when we first request that the commit begin
and when it actually begins, so we can see how much of a gap exists.
In theory, this should just be the remaining scheduling quantuum of
the thread which requested the commit (assuming it was not a
synchronous operation which triggered the commit request) plus
scheduling overhead; however, it's possible that real time processes
might get in the way of letting the kjournald thread from executing.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: issue cache flush after checkpointing even with internal journal

When we reach jbd2_cleanup_journal_tail(), there is no guarantee that
checkpointed buffers are on a stable storage - especially if buffers were
written out by jbd2_log_do_checkpoint(), they are likely to be only in disk's
caches. Thus when we update journal superblock effectively removing old
transaction from journal, this write of superblock can get to stable storage
before those checkpointed buffers which can result in filesystem corruption
after a crash. Thus we must unconditionally issue a cache flush before we
update journal superblock in these cases.

A similar problem can also occur if journal superblock is written only in
disk's caches, other transaction starts reusing space of the transaction
cleaned from the log and power failure happens. Subsequent journal replay would
still try to replay the old transaction but some of it's blocks may be already
overwritten by the new transaction. For this reason we must use WRITE_FUA when
updating log tail and we must first write new log tail to disk and update
in-memory information only after that.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: split updating of journal superblock and marking journal empty

There are three case of updating journal superblock. In the first case, we want
to mark journal as empty (setting s_sequence to 0), in the second case we want
to update log tail, in the third case we want to update s_errno. Split these
cases into separate functions. It makes the code slightly more straightforward
and later patches will make the distinction even more important.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: add drop_transaction/update_superblock_end tracepoints

This patch adds trace_jbd2_drop_transaction and
trace_jbd2_update_superblock_end because there are similar tracepoints
in jbd and they are needed in jbd2 as well.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

jbd2: remove jbd2_dev_to_name() from jbd2 tracepoints

Using function calls in TP_printk causes perf heartburn, so print the
MAJOR/MINOR device numbers instead.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: add more tracepoints and use dev_t in the trace buffer

- Add more ext4 tracepoints.
- Change ext4 tracepoints to use dev_t field with MAJOR/MINOR macros
so that we can save 4 bytes in the ring buffer on some platforms.
- Add sync_mode to ext4_da_writepages, ext4_da_write_pages, and
ext4_da_writepages_result tracepoints. Also remove for_reclaim
field from ext4_da_writepages since it is usually not very useful.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4,jbd2: convert tracepoints to use major/minor numbers

Unfortunately perf can't deal with anything other than direct structure
accesses in the TP_printk() section. It will drop dead when it sees
jbd2_dev_to_name() in the "print fmt" section of the tracepoint.

Addresses-Google-Bug: 3138508

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: Add new tracepoint for jbd2_cleanup_journal_tail

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

tracing: Convert some jbd2 events to DEFINE_EVENT

Use DECLARE_EVENT_CLASS to remove duplicate code:

text data bss dec hex filename
34903 1693 448 37044 90b4 fs/jbd2/journal.o.old
31931 1693 416 34040 84f8 fs/jbd2/journal.o

Four events are converted:

jbd2_commit: jbd2_start_commit,
jbd2_commit_{locking, flushing, logging}

No change in functionality.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E290F.7030909@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

jbd2: Use tracepoints for history file

The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure. We
save memory as a bonus.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4: fix tracepoint format string warnings

Unlike on some other architectures ino_t is an unsigned int on s390.
So add an explicit cast to avoid lots of compile warnings:

In file included from include/trace/ftrace.h:285,
from include/trace/define_trace.h:61,
from include/trace/events/ext4.h:711,
from fs/ext4/super.c:50:
include/trace/events/ext4.h: In function 'ftrace_raw_output_ext4_free_inode':
include/trace/events/ext4.h:12: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

tracing/events: Move TRACE_SYSTEM outside of include guard

If TRACE_INCLDUE_FILE is defined, <trace/events/TRACE_INCLUDE_FILE.h>
will be included and compiled, otherwise it will be
<trace/events/TRACE_SYSTEM.h>

So TRACE_SYSTEM should be defined outside of #if proctection,
just like TRACE_INCLUDE_FILE.

Imaging this scenario:

#include <trace/events/foo.h>
-> TRACE_SYSTEM == foo
...
#include <trace/events/bar.h>
-> TRACE_SYSTEM == bar
...
#define CREATE_TRACE_POINTS
#include <trace/events/foo.h>
-> TRACE_SYSTEM == bar !!!

and then bar.h will be included and compiled.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A5A9CF1.2010007@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

jbd2: convert instrumentation from markers to tracepoints

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>